#irl-gear
1 messages · Page 73 of 1
So throw it at your Serbian neighbor idgaf
But you're not getting this internet clout
Maybe it'll start another World War
lmao
That'd be a headline right there
do i have to throw it or is there any other way to show its live
I wouldn't mess with it if it were
since a lot of them dont explode
It's a hand grenade
last two didnt although the firing pin did
Well mine as the firing pin still in it
theyve been sitting in a random garage for like 30 years
It's just carved out
All the explosives are out of it
It just clicks
And I have to reset it with a pen
well if i remove the protection cap it can show the explosive fill inside right
i havent opened it personally cuz my dad does that but i can show a pic of that
Unless they were for training
Again, I don't really care enough, but I also don't want to be personally responsible for you blowing up your house with 70 year old Italian grenades
Hopefully ravioli just spills everywhere
I'm reading that you basically can't
I guess you could unscrew the fuse
But again
If it is a live hand grenade, I wouldn't touch it
Ever
I'd keep it for a rainy day
oh i have a bag full
Well as long as you're following all local laws and ordinances and are in way in violation of any international laws or conventions
I wouldn't keep grenades in my house though
also a stick of dynamite though idk if i wanna try to do anything of it since its been sitting there since 1997
Touching a decades-old impact grenade sounds like a gamble in itself
the impact is ww2
Are you sure it's dynamite or a flare?
round stick thats yellow
Dude’s house is a ticking timebomb lol
Does it have a fuse or a cap?
hmm
Any crystal-y white stuff formed on the outside of it?
it has changed colors in some parts but i think thats cuz it has been exposed to water in the air, idk what thats called
its darker yellow in some parts
Does it say 'Ammonium' on it anywhere?
nope
Sus
its literally just a stick of yellow
yep but it was taken from the weapon depot in 1997
A weapons depot would also have flares and fusees
Plot twist, it’s one of those rifle flares
I can see why it wasnt labeled judging by a small cut it has in the middle i think it was meant to make explosives (and it is two portions that I have)
Someone might have taken the ammonium out then
the impact grenades almost look like some grenade prop from the og Star Wars movies somebody at lucasfilm made with a salt shaker or some cripe like that
Thermal detonators?
nope theyre real
idk my father told me its dynamite
thermal detonators are from star wars lmao
Nah that was in reference to the Star Wars thing
ohh lmao
kinda reminds me of those breacher grenades
proton grenades or whatever they called them
@timber cargo I know you think its not real but in the balkans (especially albania) theres tons of old equipment everywhere
some people still have guns and explosives, some is just buried (my father found a ppsh mag)
EFT webstore
if its still in stock ofc
what store?
Greyshop
dont
just dont buy from there it will take literally 3 months and customer support is non existent
Isn’t that a coke bottle or something?
that’s a coke bottle
Yeah
It's a thermal detonator bottle
thermal detonator?
nvm that actually is a proton grenade
My office
Nice
Why did you post an empty bathroom?
unless its on telegram 😆
So trve
@snow scarab I got something kinda cool
do tell
nice
fuck yeah
W
WWWW fr
Lol he payed dearly for it too
i need one
these urs?
How much is that?
Usually runs over 400 brand new
Thats expensive 😭
For a good quad not really
My dd ris 2 retails for 500
A little over 500
you'll quickly discover that any gun-related sporting activity or hobby often comes with a significant price tag
it's pretty easy to spend a few hundred on an hour or two of shooting
Ah wait I thought you replied to my other photo nah I got that for 50 bucks it was a friend discount
Thought you replied to my arms rail photo
I was genuinely shock by that price
Yeah i know, its so expensive. Specialty like some stuff thats only available from other countries
sometimes imported stuff can actually be cheaper but you might have to work around some strange quirks
russian lams for example were one of the few ways to get reliable full power lasers in NA before the war
Yeah, but mostly its become a lot pricier
I wanna buy some camos but its become more expensive since in my country its already hard to get a basic camo
purchasing power also varies drastically across different countries. if an item has to be imported, it will reflect that. you can always look into domestic military surplus
bro is doing a task
i never understood why the game wants you to leave ir strobes all over the map
Doin gunsmith soon


nice
i have the same
let me know what you think
for me it feels kinda heavy and idk if i figured out the padding all that well.. but for the price i guess you cant expect team wendy
It's lighter than my current helmet. And exponentially more comfortable.
@naive maple you know of any covers that fit it?
I asked agilite
yikes
i havent gotten that far yet, i'm not actually sure what helmet it is a clone of
i just assumed its a clone of some ops-core shapewise
since it has copies of ops-core rails
dont you guys use that clown hat still anyway
the shape-relief-breaker
PROTECTION GROUP DENMARK ARCH LEVEL IIIA BULLET PROOF HELMET This PDG helmet is "high cut," leaving room for communication equipment in the form of headsets and hearing protection. Additionally, the rail system allows you to add; an O2 mask, lights, camera, night vision equipment, flashlight, weapon sight etc and a GoP
okay i guess its a copy of a MICH shape? https://protectiongroupdenmark.com/shop/5-ballistic-helmet/50-pgd-archmich-helmet-cover/
On older helmets yes. With newer tactical helmets it just doesn't work.
There are too many accessories on your head for the mitznefet to work properly
Most conscripts you see with the latest gear don't actually use the "clown hat"
I must've missed this fitting tool. Thank you. That was the one that seemed closest
im honestly confused with the amount of shit people put on their helmet
snag hazard, bump hazard, more weight on the neck.. get it i do not
shit you need like ear pro, nods, counterweight, maybe a strobe if thats your SOP.. but all sorts of other shit i dont get
like adding a light to the helmet, i would rather have a headlamp around my neck or something
Yeah it's wild.
Helmet with a fabric camo cover
Under it active earmuffs
Ballistic goggles
And you are combat ready.
does anyone here have a crye structural cummer

I'm going to get the surefire helmet light to try it. The headlamp didn't work so well on my helmet. Got in the way of the nods
Around my neck didn't work either. Couldn't really aim it.
a crye SPC?
yes but mainly the structural cummerbund it is meant to go with
what about it?
ok - getting side armor, is that enough wiggle room still when sized down
should be. do the math on your chest size
😱😱😱
Where you at man? Those are super rare in the us
welcome back. did you find those breaching rounds we were talking about last time?
also, that's the projectile i've been referring to. got around to pulling it
which surefire? like a turbo? or the HL-1?
are you saying this is a breaching round? or just a regular slug?
neither, it's a magnesium flare
it's basically a tracer element without everything else you'd normally have in a round
would actually be cool if you could customize med kits
yeah make them like a wallet or docs case... but only for meds
never thought of that, that would be a pretty cool thing to play with
then again, would that defeat the purpose of an injector case?
anyone want to run reserve or shoreline with me. I have task i need to complete
no just make stims not compatible
make it a 1x3
actually'
1x2
keep the heal system the same but if u have a splint or a heavy or light bleed in there to make it more customizeable but better ballanced
make grizzly a 3x3
Germanyyy
East germany
You think i could take it with me to da us and sell it there?
nope
what did that cost you?
ive seen some semiauto VSSes in shops, but never the as val
Bought it for 700€ lmfao with a whole hpa rig

what
oh it's airsoft
go to the airsoft channel with that
Hl1
what ear pro are you using/gonna use
they make an ARC rail adapter for it
Doesn't it ship with it?
I use plugs and Howard leight
regular plugs or electronic ones?
Regular
no it ships with the ACH helmet mount
What's the diff
Won't work on my rail?
the ACH helmet mount is a tension mount
it sits like this
i can imagine you can find some way to get it onto a fast style, but idk if it’ll work well
Ah clips to the actual helmet
My Shaw order finally shipped
I don't need comms so I want to find a less expensive helmet mounted ear pro option
someone makes adapters for howard leights to the peltor ARC adapters
I was trying to find that
I also heard the same
My impact sports are indestructible lmao
I have one pair that's nearly 10 years old. And just survived war
based
@snow scarab eyy fellow rakkasan XD
what?
if you are referring to the ACH, that is not mine lol
ahh damn that patch is recongnized XD mine was a bit different
The Bifrost Gear COM-RAC for Howard Leight allows operators to easily convert their Howard Leight Impact Sport headsets to work with the Ops-Core AMP Helmet Rail Mount Kit (RAC Arms)Features: Converts OPS-Core AMP arms to work with Howard Leight Impact Sport Headsets and Earmuffs Allows headsets to attach to rear dovet

i mean, you could try that
but also bleh, amp arms
I'd feel so dirty and poor
i’ve seen people with walkers on arms with SFs
trust me, you’ll be fine
I got an IFF beacon half the price of the Hel star. I'll see if it's any good
what brand?
what kind of night vision are you guys getting issued?
None
I brought my own
Officers get pvs31's. Designated marksman get a pvs12 litton Akila or noga lior. Negev gunners use some kind of pvs14
but regular guys don’t get anything? or just reservists don’t?
damn bruh
Reservists seldom get what they need
good thinking though
Yes
this is weird to look at 😂
Why
the plastic handguard and fixed carry handle
just strange to see with something like a DBAL and that end rail section on it
Hah. Worked well.
That's a colt Canada triad rail. Same one the Canadian army uses on their c7/8
made my room a gym before my hideout
is this what reservists get still?
an unironic use case for larues ludicrous carry handle extension
yes
i know what the answer is but you're not allowed to put your own upper on there are you
if you had one, yeah
i won't risk bringing an upper to israel lol
huh!
here you would get put on a stake by command for putting a civilian upper on an issue carbine
aanything goes in reserves
it's awesome
yo guys
rate my new candy supply
wait
i've got an idea
guys hear me out
red ones taste the best
probably strawberry
or smth
y know what
ur right
tastes the same as sour apple
nah bro
tastes like lemon
woudnt recomennd
sory for my bad english btw
sorry*

no more candy
fuck
i need to take more
shit is good fr
what is russian glass stick?
nah
these are for checking air pollution in combat situation
used mostly by lwp recon in the 80's
like gasses n shit
oh ok. kinda cool.
did OSINT with the IPERYT written on it 😄 now i know exactly what it is 😄
yea
and guess what
there si more
is*
chlorium-cyonide
and all the ww1 gasses
nostalgic smell
damn
love the nvg tho
hi cut duct tape
its even written on the back side
armor class 5
ofc
and tactical hammer, in case ur main weapon, and secondary jamms
and u loose ur knife
there was a situation, that sas operator killed 3 guys after his main weapon and secondary jammed
holy shit
it started snowing again
imma need to do an irl snow raid
tbh this looks better because the light is off
bout nostalgic smell
gues what
guess*
there is even Fosgen and Duofosgen
so its like smell of rotting friut or freshly cut grass
the stated reason is if you're wearing gas masks and/or nods
the real reason is to sell dumb looking shit to instagram commandos
Mhmmmm yea true it looks alot better in the dark but at the time it was christmas day and i jus got done puttin it together sooo yaa
the stock riser allows for more full contact on the stock instead of a chin weld
what happened here
my plate carriers
aor1<<<<
Anyone in here know how much smersh rigs were going for pre-war?
anyone knows where can i find this type of jacket for a cosplay?
That's a nice jacket btw. I think old work coats/jackets are a good starting point
the material looks to be like polyster
looks like some old welding overall tbh
it looks like more of a coat
yup
Just another basic human necessity. The DevTac Ronin is a beast of a helmet. And yes, for those larping on a budget they make non-ballistic version for a fraction of the price.
https://www.devtacdesigns.com
BOOM DIGGITY MERCH! https://www.bunkerbranding.com/pages/arm-gun
B Channel: https://www.youtube.com/@armandgun2
SOCIALS
Instagram: h...
i do wonder how bad the backface deformation on that thing is getting hit by pistol rounds
I guess the face is pretty fkd but "no big hole"
like hitting with a shovel or smth
wouldn't wanna experience that lol
the main issue is that it's right up in your face
if there are any and i mean any hot spots, that's gonna guarantee broken bones
possibly better than eating a round to the face but you're still goona be out of the fight
didnt ppl test them and arent they kinda crap
you'd think that that's pretty obvious even without testing them
there's a reason why face shield are usually a solid inch or two from your face
yeah im just saying that the fact that its on your face is irrelevant if its not even effective at stopping rounds
they look dope tho lol
i'm sure you can make them stop rounds
but it's like lv4 stopping 300 win mag, you're still goona die
i mean they'd be really heavy and deformation would be a problem
If it doesnt crush your nasal cavity up to your brain, its snapping your neck or spinal chord. Likely both in that scenario
Fort Gladiator C
false
This is pretty close, Helikon Patriot jacket. Pretty pricy though
thank you very much bro
demolition ranch did a test on one years ago
Didnt know that, just assumed/was being humorous. Thanks though dont want annoying myths going around. I realize the velocities simply dont allow that to happen as the energy trnsfer like you said would go over a large area and shatter bones, doesnt have enough force to accelerate you neck backwards to the point of snapping, even at 50cal. Looked up a vid from hard head vets that explains it pretty well.
What does a water bottle look like irl
Bro has been waiting months to use this gif
real
first gif on water bottle
@full flower don't repost things please
cant have any fun on this server lol
@marsh flint
🫡😌
Thank you
Your pfp is great
where is this from bro?
raid movie
the indian movie?
Ty
It is the dorm room furthest from the top stairs on 2 story
yw hopefully this information helps you to achieve your goals
it looks so refreshing
TINY ASS PLATES DUDE
They're side plates
Oh then im the idiot
Perhaps
I never wore side plates in my service since they were too clunky in my vest + front is all that really matters
Side plates on the fort gladiator are actually external from the vest itself
They're the square plate bags on the outside
Cool to know
That is one hefty ass vest
How much does it weigh all plates inserted?
27-28kg
lol what?
side plates also protect you from the front
what country did you serve in?
Side plates are a stupid meme
😂😂😂
sure thing bud
not like literal thousands of guys were saved by side plates over the last 20 years
6x6 plate is a waste of space
Lol, lmao
you’re right, that’s why i run a 6x8
Doesn’t matter
yes it does
I will take extra ammo over it
adds 4 lbs of weight
side plates don’t mean you carry less ammo
what are you smoking?
side plates go INSIDE the cummerbund
what?
literally ask anybody who has worn body armor before. side plates go inside the cummerbund against your body
just like your front and rear plates
What a sped. Lmk if you would like to be unblocked later.
whether it be a full size armor vest or a plate carrier. it goes inside the cummerbund lol
ah yes, i’m the sped. the person telling you the doctrine of how every military, PD, and contractor wears their body armor
@coarse laurel @low fox @storm peak please ridicule this man for me
if you wear your side plates outside of your cummerbund, you are the idiot, not me lol
@raw river even you aren’t this dumb
Lol
tbf, he just joined today and has a putin wearing a Z for a profile picture
he’s probably just a troll but it’s still fucking hilarious to see people embarrass themselves
I mean, the side plate pouches on my carrier have molle on them so I can run extra mag pouches on top of I wanted to
Win win
I don't wear side plates
Extra weight and bulk for nothin
I think he was talking about the weight
Still a stupid take, but I think that's what he meant rather than not being able to carry it
You don't wear side plates bc of weight
I don't wear side plates because I'm poor. We are not the same
minimal extra weight, minimal bulk for 96 square inches of extra protection
Ye I don't care enough
It's extra side bulk
Why use plates at all
It stays off my kit
I got 3 sets of issued side plates
I use none of it
I asked santa for PVS 31's
gonna ask santa for GPNVGs
did you get them?
It's more so the bulk than weight
i never wore em either
those 2.2lbs made me smell like ball sweat and stale beer in texas summers
Me watching this convo while my polish plate carrier has fake plates in it 
Ye cummerbund on the avs with the bridal, I got the stretchy thing for my spiritus
Bought this today
really dude. you have an AVS, and you complained about bulk. the MSAPs are so thin it’s stupid. and the ABS is designed to run side plates without interference
Antilock Braking System
Ye I don't care
Side plates aren't worth it for me
If I get hit in the side so be it, my momma mortgage will be paid
I like my soldiers thicc
look at this wide mf
I love how a carrier with all of the plates in and gear on top just makes your torso look w i d e
Avs is issued, not a fan of it
that’s also a gen 3 IOTV, it’s gonna do that
gen 4 doesn’t add much
True
I love bulky carriers
Not for practicality, but they look funny
yeah. that is my IOTV compared to my SPC (it’s normally got way more on it)
My plate carrier isn't even real
and has no plates- not even pseudo plates out of cardboard or some shit
but it's for airsoft so it doesn't really matter
Goofiest kit of all time
stand up straight stop slouching like a loser
wdym?
even slouching i’m taller than you
im an inch taller than you lmao
thought you were 6’3
maybe its the angle but you look like the hey arnold character whos neck extends out 3 feet
my neck was forward a bit due to the helmet and gas mask. but i’m not really slouching so much as compensating for the weight
No

Estonia lol, i was in a recon batallion
They really are, like when are you gonna get shot in thr side? You have a dude next to you covering ur side!
what about the dude on the outside

What
Oh that doesnt matter
Theur mistake
F
Dont be last lol
Jk
In combat enviormentw you will wear side plates
But in recon and shit you dont want them
You will just run if yku get spotted
Pointman, mg, at dude and a grenadier
Shoot some bangs and run
Well thats training, reality you just have a gun, some rangrfinder, binocs, sometimes nvg's and light body armour
Maybe some dude you can be with
But deeeeepenedssss
@plush topaz https://www.larue.com/products/AccARizer/
LaRue AccARizer Rail, Sights, and QD Mount - Details, specs, manuals, images & videos, read the latest reviews or write your own
unironically
you guys are the only ones on earth with a use case for this.. thing
Hidious. I'd be laughed out of the army if I showed up with that.
"We were approached with a request to modernize an existing surplus of Vietnam-era carbine style rifles with fixed carry handles and A2 front sight posts."
Yea just make a picatinny bridge over it
it would be better than your current solution though..
How. My optics would be sky high.
Cable management would be absurd
@naive maple the goose neck takes up a lot of rail space but it's low and solid. If I added an mlok hand guard that would be the key
But I really don't need it.
at that point it surely must be easier to just have a whole new upper
You're right, of course. But I can't bring an upper.
can one of our americans ship you one to israel?
i thought they softened up the stupid weapon regs after october
Best way would be to bring with me on the plane. Customs would seize a shipment.
But it's risky. Not worth it.
They get pissed as it is for bringing all the gear I bring
My buddy brought 40 PMAGS lmao
really?
you would think they would be glad they have to pay for less 
You son of a bitch

Mark larue remains an actual lunatic, a glorious one, but still a lunatic.
Why no M16 in the pics
You would want to hold that pistol a lil better
We need games to start using M05
Tietenki😉
SurvivalA hardcore survival sandbox experience with realistic weapon mechanics, advanced survival systems and hostile NPC’s. Featuring multiple medical conditions, tactical weapon handling, permadeath elements and in-depth character simulation.LootingScavenge, storage and craft hundreds of unique items based on real-world parameters and progress...
Coming soon
Its mirrored since it's a selfie
Well Vostok is made by a Fin and is set in Finland so im not suprised there
Nättiä!
I was about to refer to this. Nice project!
😌
Very nice pouches
Might add something to mine too. For now I have the agilite trimag
Thanks. Magazine and side pouches are by Templar's gear the mini dangler the admin are custom made. I need to do something to the admins zipper tho, I think it sticks out too much.
Oh!! I thought they were savotta but looks like there are options!
Very good looking quality
I might keep the agilite as my main (pity its not m05 but goes along fine with m05)
I have Templar gears 2,5 kg rubber plates
I use the same rubber plates too fit fine and no need for real ones yet
I'm pretty sure I havent work with anything so hard in a while when I put those inside the plate pouches. Damn. The rubber had so much friction and the fitting is tight. But got them in and theyll freaking stay
The rubber ones are fine... I'm not getting real ones probably any time soon
Yeah same had to "hammer" them in but now their not going anywhere
Who here has bought factory seconds ammo?
I saw a listing for some, idk if that kind of ammo is trash or not
Get a sissy bar and strap a rifle bag to it
This
Getting a taller one, the current one is to short for luggage
Swag money
why do most pc shoulder pad covers i see fit loose?
like they always have some wiggle /gap? is there a benefit over it being tighter?
Most have proprietary width to their product but some work around that
Causes less friction and bruising when running around
That makes sense.
lmao wheere did you get that smiley face patch
i think i lost a pmag at some point recently
Which wouldn't be a big deal except it was a loaded 5.56 mag
i had one break on me. sucks but it was a gen 2
Oh no I meant LOST
Like, there is a mag of 5.56 somewhere in my house and I'm not sure where
I do not know how I lost a loaded mag, but I seem to have done so
In your house? Whatever you'll find it eventually.
I was loading the mags in my basement and I think I just forgot to bring the 3rd one upstairs
we'll see eventually probably lmao
Go...... Check?

i dont wanna get up rn
😦
Update: it is not in the basement
there is a loaded mag somewhere in my house and I don't know where
I would like to find it
Cuz in 2024 losing 30rds of 556 is gettin close to the same as losing a car downpayment
is your house like a mess where you have to do excavations
no i just have adhd so i forget where i put things i was holding 3 minutes ago
I ate it sorry
You gotta have some heartburn
MOP CQB training with the ROK army
Fun asl but lord do they suck
Me on the left homeboy on the right
no need for real ones yet..... but soon you will need real ones.... we all will
What makes this better is me being a Fin and you having the Z symbol🤣
edgy
look at its description too...
🤣
L mans. can't take a loss
for the love of god, take the 320 off
It’s almost like the army ISSUED IT
and I can’t
they won’t allow you to run it standalone?
that’s stupid as fuck
Nah plt daddy is an ass
ah yes, cause being more comfortable means less professional
lemme guess, he’s like 38 been divorced once and only deployed once in 04
They won’t even issue me a grenadier belt
where tf do they want you to keep your 40mms???
the greatest place to keep HE rounds, in your pockets so when you go prone it gets dented
Those Templar's mag pouches work really well with your setup💪
Fuck yeah
Love it heavy
Thank you, great pouches to say the least
Sounds like something the army would do
@snow scarab I bought an agilite k zero
nice.
Who am I killing for pinging me
Not me this time
@calm stone
Yeah don’t
it was me u wafer it was in the wrong channel
put a shroud on it you mongrel
I'm Saying hi
I have no Velcro on it
A Velcro shroud? 

The helmet cover stuff right?
No. Shroud is for nods
Ah
Yeah no
Imma just toss a rino mount on it call it good

I don't want to make more holes
You can use a clip on.
Which is what I have on my idf helmet
Like I have a hole for the USGI mount
that is a shroud you mongrel
rhino mount is the the bayonet mount itself
listen mf
thats good enough tbh. buy some 4d pads and any super high cut cover
I have some team Wendy pads and harness
yoooo, first person cannoli vision

Gawd DAYUM
YOOOO, CANNOLI SHOWER POV WHEN???
I went to go look in the mirror to see how the helmet looked
I look like fucking shit right now
lmfaooo
I got a bunch of insulation in my eyes today
dw, my fingers are raw rn and my friend said i looked like a 90 year old rail worker
@worthy heart
i got moved from a driver to a dismounted team leader
@plush topaz
I tried to start a stationary business.
Unfortunately, it just didn't go anywhere.

Like, your carrier setup?
yeah
had to move everything but my tourniquet and front magazine pouches
Your hands must want to die
Molle work. The worst
yep
@plush topaz
what’s the helmet
yaa canoli oli making dad jokes again - everythings goin back to how it was before the world went crazier
very nice
What’re you trying to get out of your plate carrier
carry ~5 mags, some admin ifak and radio
really basic
Id got with a defense mechanisms mepc
Then get a Shaw concepts arc placard with the quad mag insert then an extra mag pouch for you cummerbund
I’ll link shortly
PLEASE NOTE: CALIBER INSERTS ARE SOLD SEPARATELY The ARC Placard V3 is our latest version of our ARC Placard series which is our take on bridging the gap between traditional MOLLE magazine pouches and placards. At the inception of the ARC Placard the industry was filled with double stack styled placards that couldn’t b
PLEASE NOTE: ARC PLACARD V3 SOLD SEPARATELY The RAM (Reinforced Ammunition Management) Elastic Insert is our update to the antiquated Elastic Inserts found across the market. This design was born from two problems: one was the lack of any suitable AK magazine placards out there that addressed the issue of the locking
richie rich
why not just get crye jpc
pretty sure thats what most of the people here will tell you to get
There are better options for minimalist carriers for cheaper the price, even if the jpc was used
your opinion is better than mine on this. just asked several times myself and seen it asked several times here, lots of time jpc is reccommended
That’s very true, just the hypalon material is very questionable in terms of longevity as they’re prone to ripping over time
You should buy me one of them wendys
And send it via mail
It's a harness and pad system
It's like 100 bucks maybe less
But the whole package including the helmet
smash, next question
i think they look dumb
thats it
to always look cool is of the highest tactical importance
duh but how do cryes not look cool
not my pic
AVS and CPC are beautiful
but crazy expensive
for just the plate bags i could get a whole setup
how much was the hole setup if u dont mind me askin?
Dame this wizard isnt going to cast fireball but ICBM on his enemis
they are probably one of the most used carriers by US SOCOM lol
i know that, so what?
i personally just dont like their look, so i dont want it, and its not like by not getting a JPC it is actually sacrificing performance
Thanks buddy. But I have another deployment coming up in March
I need a placard or double stacked placard that'll hold 6 magazines. I just got my hands on an agilite one but it's not what I want
i don't even care too much about the conflict but can we send you cool stuff
What do you mean
that'll get you pretty fat bellied, wouldn't it be nicer to have a quad placard and add the two other mags to the cummerbund or your belt line
i mean if you need some odds and ends it would be fun if the community in here sent you stuff and you actually had a use for it
Yes. But I'd like to try a few different setups. I'm. Used to the front heavy load out. I've never carried anything on my belt before
these inserts are nice, hes come out with a quad version recently https://shaw-concepts.com/products/hybrid-elastic-inserts
PLEASE NOTE: ARC PLACARD V3 SOLD SEPARATELY The RAM (Reinforced Ammunition Management) Elastic Insert is our update to the antiquated Elastic Inserts found across the market. This design was born from two problems: one was the lack of any suitable AK magazine placards out there that addressed the issue of the locking
I can send you my k19 plate carrier if you want
That's very thoughtful of you. Thank you. I ran several funding drives for gear (when I was in Canada) and straight cash to use in Israel. Either for local acquisitions or just for special food like bbqs
Wow. I appreciate the offer. I'd buy it off you if anything.
And they fit in the arc placard?
Yea that would work if you want
yes
idk what other placards they would possibly fit in ,i have the 3 mag version in a ferro concepts kangaroo placard
Easy to reinsert?
What colour is it. I can't wear anything other than green
Ranger green
Lmao
i tried another more "usual" mag insert design and the retention was way too much
if i had to use that thing in combat i would just kill myself and get it over with

What do you want for it?
Would 120 be fine ?
ofc my guy. we'll get the next jokes after that deployment
Absolutely.
Cool beans
Sent you a pm
Yep my for the price of my AVS plate bags I could have bought a whole ferro FCPC Cbund and all
But the AVS is very nice
Most recent pic. I have a few Paraclete smoke green pouches on it now
The Paraclete NVG pouches are great GP pouches once you cut some stuff off
Earmor M32 arrived today
Sadly my adapter doesn’t work
I think I spent about $24,000 including the plate carrier.
gross
Don’t wanna spend hundreds on a headset
skill issue
oke...thats a big difference then 24k....
what plate carrier and plates you got?
I loaded the NIJ LV4 ballistic plate into the AVS plate carrier.
he gon make ur balls explode
damn.....
that doesn’t even narrow it down lol
what plates
hesco 4800lv
It's in my suitcase, but I don't think I've taken it out for the past month.
Pesos?
Mood

@plush topaz
with the tent on and bed full of gear it really doesn’t like to spin lol
if you’re home you gotta get out in this snow
Don't break it!
^
i would never break my truck, too much at least
it had a few dents and scrapes but nothing major
Was a joke 
I know
But typically when somebody is whipping their car all my mechanic friends look in horror

damn, man really spent more than my yearly income on a setup
Feeling like shit now
you can get a perfectly serviceable pvs14 for 1500 dollars
Nah i just meant in genenral, that some guys spend as much on gear as I earn in more than a year total, but its understandable since you guys are mostly americans, who can afford and are even just able to buy the stuff
The differences in the world are crazy. There’s people rn with 50k,100k,200k + in their savings in here, and in a lot of countries that would be like an entire family / estate set for years.
Oh nvm you’re talking about a 24k plate carrier nvm
Most people aren’t spending 24k on a plate carrier though. That’s not a good scale to judge yourself on
no, hes talking about a helmet setup with comms, binocular nvgs, and a plate carrier
90% of the hit is the binos
Ohhhh my b I read it all wrong
Yup ik
Why 24 though still? Aren’t they like 2-3k for ones that work as soon as you buy them
15k nvm, just have to actually scroll up and read
It’s too early
https://tnvc.com/shop/tnv-dtnvs-dual-tube-night-vision-system/ its 11k for l3/harris white phosphor tubes
Improved Lightweight Binocular NVG ALL TNV NIGHT VISION SYSTEMS ARE SEMI-CUSTOM UNITS BUILT TO ORDER--Current lead time on the TNV/DTNVS Thin-Filmed GP is 4-8 Weeks and Un-Filmed WP is 6-10 Weeks PLEASE READ IMPORTANT DETAILS IN THE PRODUCT DESCRIPTION Recommended Accessories: Wilcox L4 G24 Mount - BUY HERE
@naive maple the binos I want are $15k
idk if it gets any better than these
15k in america?
how come?
do they come with a freshly trafficked blonde?
Canadian
rip
look you can get this which is a nicer and lighter unit, with equivalent or better tubes, for thousands less https://www.falconclaw.eu/product/act-dtnvs-echo-pluss-white-phosphor/
That's actually more expensive
And I want the arnvg because they have aluminum Housing.
Bit heavier. But tough
I broke my nods in Gaza. Not fucking around again
yeah its like this tanto thing that people are raving about
oh it's so light they say
it's 3d printed
no way hoss
A brisk wind and its toast
Although. Have you seen this unit? Sec. Feature rich for the price
** Temporarily sold out; Backorders open; ETA January 17 ** The Infiray Jerry-31 Night Vision Monocular is an ultra-lightweight, full-featured night vision binocular that features NNVT NVT4 1400-1600 FOM manual gain, non-autogated, white phosphor image intensifiers. The NNVT intensifiers for the Jerry-31 are premium, h
i'm currently looking myself, but i don't have the budget for that stuff
i'm going to get a pvs14
i don't like chinese products
i don't buy chinese products as a matter of principle unless the alternatives are either astronomically unrealistically expensive, or unavailable for dumb reasons
like, i'm going to buy the new holosun VCSEL laser when it comes out, since i can buy those at full power, while western lasers are insanely expensive and impossible to get at full power
hold off, holosun is launching a VCSEL laser at shot show
which is.. this weekend? next week?
soon at any rate
unknown at this time
it will be more expensive since it is more advanced
somewhere between the current lineup of holosun lasers and the eotech OGL
since that's the competition they're aiming at
looks like strike industries is launching a crappy chinese laser too, or hey maybe it's taiwanese instead of chinese, so that's actually interesting https://www.instagram.com/p/C2BjR45sXvD/?igsh=d25zaGQ4bjZ5N2tk
We love designing and researching from the beginning. It took us six months to design the laser head, ensuring concentricity. Through extensive optics design, our laser dot shape is now perfect, sharp, and clear, especially in comparison to the existing military-issued laser pointer.
346
Those damn Chinese tempting us
Feature rich products for less shekels
i mean in the case of lasers our own cvnt corporations won't sell them to us
so i don't feel bad
You right
do u drink milk from a bag?
thats only part of canada
My tagilla cosplay
Of course. What kind of question is that.
idk jus addressing the myth i heard from a friend lolol

Yes we have bagged milk. Personally I don't buy them because they're messy
And don't keep as long
I only use milk for coffee
lol reallly?
Ya you put the bag in a milk pitcher. When you pour it it can spill
heh thats wierd
haha who is this
a congresscritter
ha

So, question, how good of a pair of NVG tubes would i need to actually have fun looking at the stars with?
It's in my bucket list but i don't wanna spend 40k bucks to do what i could with my considerably less expensive telescope lmao
Idk where you got 40k from but it’s cool
Alot of nvgs cost 40k
i actually won a raffle for one, still waiting on the factory, ill let you guys know what i think of it once it comes in.
yeah no. only quad NODs are going to cost you 40k
a regular pvs14 is like anywhere from 2800-4000
Or fusion systems
nope
not unless you buy expensive ass duals and two thermals
but only one is required and duals can be had for as low as 5k
This is the reason so many people are turned off of nods. The misinformation that is an entirely unaffordable hobby to get into. Even if they do, they waste years saving up thousands to buy a high end device when they couldve bought a decent pvs14 for 3k get a head start learning about the in depths of night vision and enjoying larping under the stars.
i mean i said alot of them are 40, not all. But some people think that 3k is too cheap compared to 40k and think its very bad
A lot of them are not 40k. and yes that was my point. They pointlessly save up for years as opposed to getting into nods now
No one is going to save up for years without doing research or trying to find cheaper ones.
You'd be surprised
based?
I think it's pretty based
depends how he got it
LOL
I think he bought it in a store lmao
in st petersberg
ah ok
Yes that’d be badass
11B’s are area beautification specialists Change my mind
is there hearing protection that let you hear almost normal so you can still have the spatial awareness
pretty much any electronic hearing protection
I have directional headphones but it still is hard to pinpoint sounds when I'm hunting
You probably just have shitty situational awareness
what kind?
Peltor comtacs
Don't settle for anything less
Yes well most people don’t wanna drop 700 dollars on a shooting headset

