#irl-gear
1 messages · Page 29 of 1
tbh i swapped springs with the adm lower
jp polished
and i have an h2 in it
noveski h2 was the cheapest i could find too some how
Good
idk man it was $10
i guess a buffer is a buffer
Keep an eye on your buffer spring basically is all I'm saying. And watch for fractures on your bolt head around the cam pin. Always install your cam pin the same way every time @proud hazel
Good good
what is the bootleg made of
I don't know off hand.
I'd think 9310
PWS tends to use 9310
Bootleg is pws
So
Meep
it says s7 but i think thats the body
Yeah.
@proud hazel 9310 can be good but requires more care, it's more common because it's easier to get it in small batches as I understand it.
Carpenter 158 is easier to work with but harder to get.
A good 9310 bolt is as good as a good Carpenter 158
But a cheap 9310 might be a dice roll, while a cheap 158 might be fine.
When made well they are functionally indistinguishable.
what is sharps reliabolt made of
S7
based af
Idk if I'd say that.
@proud hazel tests done with the sharps bolts showed they lasted about on par with every other bolt, less than LMTs.
S7 is really picky about its heat treat.
Firearm Discussion and Resources from AR-15, AK-47, Handguns and more! Buy, Sell, and Trade your Firearms and Gear.
what is lmt made of
I'm unsure. It's supposedly a secret?
The traditional Carpenter 158 is abandoned, being replaced by a significantly tougher grade from a different manufacturer.
- LMT
The main thing is it's a stronger design
maybe i should buy an lmt
It's an AerMet steel
Downside to that is it has to be hard chromed. Supposedly the base steel sucks at corrosion resistance.
@proud hazel also supposedly the relieved locking lugs will break more cleanly and can keep running with multiple damaged or missing lugs
sick
No clue but I'm pretty sure they drop in.
what does
The bcg
The enhanced bcg also increases dwell time BTW
that is hot
Can help keep gas out of your mouth while supressed.
I'm not sure you can get stronger.
Wedgelocks were already approaching monolithic, and Drive lock is even stronger.
well this is the only upper rated for grenade launchers with out a spring so
Wedge lock handguards will hold zero with actual optics BTW @proud hazel
and the grenade launcher
How does it mount?
Unless the bottom half comes off or it is referring to a pic mounted GL?
pretty sure it direct mounts but idk
i do think the bottom half comes off for barrel nut and what not
same but they do seem to make a good quality product just has qc issues
and to be fair they make so many guns for so many militaries
pretty crazy
I'm debating on getting a lmt enhanced for my 13.9
they are like $469
and oos
or do you mean just the bolt head
that is 379 and oos
@proud hazel
nice
LMT grenade launchers are globally recognized as the most reliable M203 platform in the industry.
So yeah, pickletinny
this is based
Buy it for your m16a4
Nigh nigh
Picatinny adapters off the MLOK slots
LMTs are entire blocks of milled monolithic 7075-T6
The rail walls are also fairly thick
LMTs are about as strong as you can get, but it kind of gets into a conversation of diminished returns
Boyfriend dropped off the trunk of his truck onto his LMT MWS upper
He also landed on concrete, he's 6'4", bulked up, and was in his carrier and bag
Hardly anything happened to it
He just filled in the scratches and it's good as new
It's a really neat setup
like on purpose??
nice
I would presume not
@worthy heart looks good
How does it look from the back
I need to do minor clean up work but once your eyes adjust looks good
Marvelous
getting a little personal there
What we did at work
Had to destroy like 200 cellphones
And laptops
Me and one of my buddy shot them
Something catchy

Big G
🤷♂️ what can i say, im a comedy genius
@coarse laurel @plush topaz @raw river my civilian bought IFAK came with a whopping 2 feet of quikclot 😂
You could save the entire Ukrainian army
lmfao
Bruh it’s supposed to be that long
is it??
Please tell me you didn’t open the package
i thought if was a giant fuckin roll
no i didn’t
No
what am i thinking of that’s a huge roll of shit
Do you know how to use it?
So you know this thing will literally be inside said bullethole
yes
Like deep
nothing has been opened or touched
was just looking through it
so what am i thinking of then?
Have you ever packaged gauze before
i’ve packed gauze on a pig before for training. that shit was a big roll tho
it was from an IFAK, i could just be completely misremembering how big the roll was
ah ik what i’m thinking of. i’m thinking of the big rolls in CLS bags
i’m fucking dumb
accidentally watching that shit happen is fucking nasty
Is that a thing
Yes.
Sadly
the whole tampon thing pisses me off
it doesnt work
it absorbs blood but it doesnt help give enough pressure to stop bleeding
works for bloody noses, that’s about it
@wind cave
i switched around the radio pouch
SPC
should i not get this instead of jpc?
you could, but it’s going to be a pain in the dick to put together and is only useful if you are gonna load it up
like i have that giant ass ifak and i’m adding side plates too it so i need the structural aspect
Accident
Plate carrier with stuff vs chest rig on top on minimal plate carrier
I’m leaning towards the chest rig for versatility
as a placard or standalone?
cause that can get pretty uncomfy
Stand-alone rig
I feel like I can manage
I don’t want to run plates all of the time but I’ll always want to run a rig
get a rig that can take plates then
not many made anymore
doesnt mayflower make one?
NATO’s first ever gaming event. NATO Expert Robin El Kady joined @ZeRoyalViking and PTF Creators Caroline Gleich and Sergio Hidalgo to play Among Us, and talk all things cyber and information.
How does cyber security protect the future?
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
SUBSCRIBE to this channel http://bit.ly/NATOsubscribe
SUBSCRIBE to NATO News http://bi...
What did NATO mean by this
Wtf is that shape
It's pretty normal ngl
That's how suppressors look on the inside
I mean the actual shape of it
you can tell me that’s how suppressor actually look inside
I just don't know how they did the whole right angle bend
I'm pretty impressed
I might actually message the company to get the backstory behind it
Uh was it intended
Or strain on the material and heat caused it to change its initial shape?
Your Wso
That guy sounds like he does cyber threat intelligence. That shit is snake oil lol
Non-technical paper pushing and report writing
hyuuuk ptooh 💦
Look into RRVs
Still a shit ton on ebay
Will do
Ye never had any of those tbh lol, baby wipes work perfectly fine
@calm stone >spend hundreds buying Gucci AR upper parts
forget where your heat gun is.
die.
Use your breath
I have 1 you can use
And I now have an oven for gun stuff
It has a dehydrate mode too which is sick 173°f all day
Cerakote, powder cote, you name it now I can do it
ooo jerky
No that oven is going to have lead in it
make jerky first
???
No I have an actual dehydrator and my new oven has the same mode
simps
Post gear
never
Ah carry on then
for the helmet pic
I see
Sup pimp
you like?
🫡
Idk it's fine
post full plate carrier
i’ve never actually seen it
just the front
@proud hazel I think he wants a full frontal
All I have on the front is a 3 mag placard
Nice and slim
A nice and slim 3"er eh
That's right
What
@snow scarab so I’m doing a lot of research
Wendy helmets don’t do well under weight
Front
front?
Yeah dude neko is p hot
true
Here is one
Yeah it’s not attached to the front of the helmet
don’t make it weird 😭
wrong one 😂😂😂😂
LMAO
@calm stone
You’re relieved
I'll go back to drinking then cya!
@calm stone these are for you
yeah i could see how that’s a problem. especially if you got big boi nods
and you made it weird
ok i was about to scold you
same
Not on my work belt tho
Thanks
You can't scold me
running it on your carrier?
Run internal
i see plenty of guys running it belt
sure i can, my kit is goated
Dude I don’t want some dumb ass to rip it off me
KEK
And spill meds everywhere/every time I go hands on
No you can't, I still have more knowledge then you
I will literally come over there and beat you
you tiny fuck
Ayo?!
UwU
If you’re a twink
Id watch
debatable
You’re down bad
@low fox what agency runs amber and blue wtf
Neko is taller than me
Ima spank her
Need a boy wife
Problem is she’s not a boy
ever heard of a lil imagination
That feminine penis


Police departments use them for construction or accidents usually
I see it all the time
Especially in the city

Who helped you build your ar
I think it’s usc campus @low fox
Who lost a detent spring
why did shovl get muted again

you, however my PC is also fully built
i know PC shit, you know guns
also i asked you specifically if i needed to worry about shit and you said no 😭
and i found the spring anyways
aight see y’all in an hour
time for TLOU
finna watch a bloater tear someone in half hopefully
Is the next episode out ?
as of 33 minutes ago
I’ll just wait till it gets put on the website I watch from
i hate you for that
Bet
@low fox only stinky poopy babies use Salomon’s for
Nahhh bros dogs are decrepit
Whoever those belong to are way too big for their feet. Look at how tight he has them 😂
bro your feet are hilarious
tf you making an onlyfans feet pic pose for
ohk theyre not yours lmaoo good
look at any location in china on google maps
because of data laws there, every location in china on public gps software is scrambled
all the roads are fake, go through buildings, its actually kinda amazing
Seems that way due to the angle of the sattelites photo. The buildings are crooked
no, lol
it's an actual law and data law
it happens with all gps data in china
even geotags on pictures
i can't tell if this is bait or not. but from your statement, you have no idea what you're talking about
no
?
you're just wrong.
Bait? It's well known google maps doesn't work in China lol
but why
but this isn't true at all
that's completely incorrect
i dont get why you wanna argue about this
It is. Happens on other maps as well. It's annoying. Extra annoying in China where it's just outright false
I'm not arguing. You are.
But that's just not true. Lmao that's not the reason
I didn't say it was.
I just commented on the bad angle
damn, what's the point in debating things that're clearly findable facts
Combined with china's data laws
I didn't debate. I added to your point.
You're out here arms swinging for no reason
But you're wrong
The satellites are not in incorrect positions
That's not "part of the reason with data laws"
You're just wrong
They are that's why the buildings are crooked. It's very common
It's completely a man-made thing and decision
No, it's not.
You're wrong. it's ok to be wrong
Makes navigating annoying using that view in some places
Sure
But in China it's irrelevant
@wind cave Israel is super blurry on maps. It's so annoying and so useless since you can use other free satelite companies for images
@calm stone found heat gun, but huxwrx no send muzzle device so I can't do nothing anyway. But it looks cool so far.
yeyee
I'm just gonna assemble it and put a brace on it @calm stone
Till the flash hider gets here.
ITS STILL LEGAL.
Probably not
This is mostly for show.
I don't want my only home defense option to be a questionably legal AR pistol
I don't wanna be the test case.
@calm stone I'm never buying a non-magpul dust cover again.
Seems silly but this is perfect.
meh, dust covers are a joke to install anyways
I just stick with a tapered pin steel
or ig technically stepped pin
@calm stone it's still a steel pin, the only difference is it has a captured spring and the right hand side of the spring articulates. The spring has a polymer leg on it that let's you grab it.
yeah Im familiar
It works like any old dust door but if your spring wears out you don't have to remove your handguard/rip off the c clip and pull it out the back with pliers.
its a copy of SI's?
No.
I forgot who made it originally
kek
Is the word fuck banned
On the SI you still have to mess around with the spring.

@calm stone anyway, on the magpul it's this leg
It's like the SI design except they didn't half ass it or overcomplicate it with adjustable detents.
yee
um excuse me this is a gear server. i am going to need to some plate carriers or something
STFU i mis clicked
that will work
gross
LBT are having a sale on multicam shiz
over half off
(just used this one as reference)
liar
the med pouch isn’t half off
(Med. PC)
medium plate carrier
wait
i read you wrong nvm
but its close enough
its cheap
What’s wrong with 5.11?
Those pants have worked well for years, 10/10 would recommend them
@snow scarab 5.11 clothes for every day use are legit
Contractors on leave from Iraq would always ask me to cop for them
Very cool Kanye thanks
@snow scarab
🙏
38 degree and raining save me
Plates and two GP pouches
And my radio pouch
need to bump it up
the coolest image you've posted that doesn't include feet
Not mine, but would people want this in tarkov?
No.
I still like it 
Hear me out, Mosin

a competition gun?
probably not lol
You guys use bnvdSG
There is no brow support
So the helmet will dip under weight
@snow scarab
I did it
nice
i’m probably going to get the micro and throw shears, chest seal, and gauze in it
and maybe an israeli in it
Israeli is good
israeli bandage is probably one of the most useful equipment you can use
PRO will give you more of the shit you’d actually need
Build your own and get the plus
These only compact chest seals
Or Fanny pack riz
i’m gonna put my shears back on my TRMP actually
Tf does that even mean lol
i dont like the MTKN at all
BFG pouch
why not?
It’s literally just too small
im going to do a fanny pack
the surplus gen ii ones are nice
doing that with my dangler
my guy do you even have any TQs on your JPC?
No cause i run a PAQ
Pack
i might put a SOF-T on it
a pack doesn’t mean you shouldn’t have easily accessible TQs
i’ll be having two
one on belt, one in TQ pouch
The TQ murder the shit outta my shoulder straps
The hook velcro?
Doesnt get caughtt on velcro
Carpet
Easier to put on legs
is it essentially the same thing?
@obsidian wolf how are RMA 1155? seen ballistics tests and they can handle about 5-6 shots of mixed 30-06 and 855a1
only downside is theyre heavier than more expensive plates
they are fine if you need budget armor
ah shit
are there any affordable sapi size plates
what’s the budget?
200
that’s not gonna get you anything 💀
like deadass
the next cheapest i would go are the RMA RF2 plates
i’m currently looking at some LTC plates from apexarmorsolutions
gonna run you like 7-800
They're bad plates
They also send YT plates that are 1lb over spec
what plates do you have
it’s just a surplus one 😂
my IFAK as of rn is just surplus
but it works like a mf
and then i’m throwing more shit in the belt kit
probably going BFG micro plus

Please dont use quiclot powder
@low fox Yall some hypebeasts
but i’m buying another one so i don’t have to take it from my car kit
same with a TQ
which btw where should i buy a CAT and some quikclot from?
PA is all out
https://redemptiontactical.com/products/two-plates-pair-of-size-extra-large-level-iv-11x13-ballistic-front-or-back-plate-curved-with-shooters-cut this seems too good to be true or is it just me
(This is for TWO Plates not a Single, if you need a Single please order the Single FREE SHIPPING INCLUDED (in the continental USA, Connecticut not allowed) Due to the War in Ukraine there is a shortage in the ceramic to make this larger size plate. So if you order it should be shipping in June 2022. We do have our oth
Redemption is shit
known for lying like a mf
i have a 46.5 in chest
do you ever work with normal level guys?
ever met that one fatass that thinks cause he can max out deadlift he’s a fucking superhero and better than you?
bruh i aint even fat im just wide
You are 5,4
oooof
Liuar
how are strike face
@low fox Post toes
What?
oh wait im dumb
its got a spall coat on it
no
LTC, Hoplite, highcom, high end HESCOs, ceramic Spartans @raw river
hawt
mans built like a fucking orc
holy fucj
PIG deltas based
i might just get III+
@low fox you can ask mike i need big plates
my leg is thicker than his torso
Hes confix is fat
depends how much you want to spend on plates
200 max
nah im prior cant
Richland is hiring
their fucking website wont let me apply
ive tried like 8 times
shit crashes every time i hit apply now
Shop Patriot Outfitters for the Paraclete LEVEL III PE 10 x 12 Multi Curve Plate and other quality Body Armor, Tactical Vests & Ballistic Protection from Point Blank.
1k for level III
do they need my .mil?
cause imma be honest that shit been fucked and deers ain’t been helping
just buy hoplite
what the fuck
@raw river use apex armor solutions
looks like some tanker shit
one of the only sellers for LTC and Hoplite
hoplite is good
or at least one of the biggest
its literally a flak helmet
hoplite is LTC
what the fuck is level III++
most of the time it’s just designed for armor piercing 5.56
what the fuck is level 3+
Ittl fall under RF2
it’s pretty much all 5.56 with lvl 3 .308 protection
its not level 3
i need this and some ALICE webbing
so it meets lvl 3 and then some
its a ww2
Get 6 Months Interest Free Financing With PayPal Pay Later.Click Here To Learn More. 4-8 week lead timeFlat Rate Shipping, Cheaper Than Hoplite. No Sales tax to 49 states.DESCRIPTION:The Hoplite 19513 series 9.5x12.5 inch triple-curve hard armor SAPI cut plate is a Level III++ Stand Alone armor plate manufactured from high-density alumina cer...
that isnt alice
ik i just wanna look goofy
@snow scarab HOoligan honda is talking ab out fukcking cerakoting an a2 stock
what the fuck
why
cause he is a dumbass
if it’s got hoplite on it, it’s gtg
he should explain what it stops
issue is its way over my budget
i need a job lol
@granite tartan went with hoplite
@low fox what don’t I need on my helmet
i mean as of rn all you need is ears, battery pack and counterweight
plus nods obviously
the surefire lights for the helmet are supposed to be really good
one of my sgts ran one on a deployment, said he loved it
Don't you have one on your gun
pen light on PC does the job better IMO
less shit on your head the better
why not just strap a red/white head light to your plate carrier
shovl you excited for the chiefs?
imagine ur squad getting wiped by the doodlebob guy
@snow scarab persuade me on an admin pouch to get
Some cheap ass firefield LPVO, with a offset Truglo reflex
something to put above my placard
yee
yikes
i think i am going to get one to hold my phone
save up for a good optic
I'll be replacing all of it soon enough
i kinda want a mini dangler
i use a ferro one
i should do a gear break down at some point of the SPC
once i get the new plates
i might also get a side saddled mag for my right side
i will yeah
this is what i’m looking at
but it’s gonna be a minute
yes they make the mini dangler
i use the normal size dangler
The Mini Dangler® drop pouch is a lower profile version of the original and popular Dangler® pouch. Like the original, it was designed to provide a ‘fanny pack’ add-on to your armor carrier. The Mini Dangler® hang height is less but is also wider than the original Dangler®. In comparison, only a minimal amount of inter
i have my engineer flag on it 
i just need a little more storage i dont want a huge pouch
@low fox you can bring 4 guys with you for a raid. infantry or combat engineer?
i was thinking about that
but this way i can buy all my shit at once
i’ll look at them
split it
oh?
you what i think you are?
if so i love you even more
about the same price but lightweight af
and thicker tho
ah
saws not my style tbh
would much rather a charge or tool
although it does have its uses
i bet lol
i mean hey, if it works it works
😂
one thing i would hope to use but know i probably will never is demo tape
live out my COD MW2 dreams
Gross
@granite tartan @snow scarab carrier, mag pouches and radio out for delivery today
Bring the radio over to my house so I can program it
It don't have a battery yet
steal Mikes
@raw river what radio you get ?
Uhhhhhh Motorola 5000
1 sec lemme look at the email
Literally steal mine
nice
They’re good radios
how much they run for ?
Wait it says it comes with a battery
In product description
Nice
Second hand 3-500
Seller has 6 left
Ight when u off next?
At 4:30
Oh ight
Bruh
@raw river sure
@twilit cape it doesn't have a charger tho
i need to figure out a good radio setup
Vietnam backpack radio
Get all the nut cancer
Oh
Yes
Yeah
Guys is there any suggestions on eye pro? Recently mine just broke but they no longer make them anymore people have said valkin eye pro is okay is this true?
for real steel?
or for airshit
@snow scarab wdym
are you looking for something for airsoft
Yes
Irl gear is airsoft no?
no
the airsoft channel is airsoft
this is for real steel stuff
@low fox toxic but sure buddy
don’t be a bitch boy
^
@granite tartan @snow scarab
that looks awful
that plate carrier
Better than the shell back I was issued
Double stackeed ar pouches
They aren't that bad to draw from I'll bring it when I bring my radio
Also I'd rather have 7 mags to 4
It's where I naturally rest my elbows lol
@low fox it ain't illegal to run in a carrier with loaded mags in a neighborhood is it
Maybe I should run some drills too
Live ammo
BTEC 6094 is BTEC 6094
What
It's LBX 0300
@snow scarab and @obsidian wolf recommended it
LBX isnt shit
Wait u recommended the mag pouches nvm
Like 109
It doesn't even have plastic inserts
Ik how to sew I'm just lazy
109 isn’t actually that bad
Why spend 100 when you could get the HRT two band for 50
Fair
or the AXL
LBT posting
Nah that shits LBX posting
LBT posting
Now let's see paul allen's plate carrier
Mayflower > LBT
also before anyone makes fun of the knife it's a task knife not a "fighting knife" and it is where it is because that was a super out of the way and convenient place to stuff it
Where antenna for radio
Just not true
Well may I suggest cattail antennas, it works wonderfully for my 152 at work
New LBT carriers>
Il check them out
IDK man Velsys/Mayflower has been consistently cranking out good stuff for years and LBT has kinda gone the way of the meme/influencer recently
I'd def take my LWPC over anything LBX
Oh yeah a hundred percent
and the 6094 is dinosaur tech at this point
It’s not bad enough to disregard the brand by any means
How so
just a much older design
The original 6094 design, sure
that's what I said yes
I still like the 6094 cut which makes it more comfortable than most carriers; and the admin pouch on the 6094A is very nice
Oh right there's different variants now
Many
They don't even list the words "6094" on their site anymore
Nope, gotta look at the item code
Still all pretty old designs tbh
I don’t know what about them makes them obsolete
Nothing wrong with them though
But imo tubes or QR of some form is practically required
I’ll never go back to velcro only lol
If you’re going to be working with water, sure
Or just in general
Tubes don’t have to be built into the plate carrier too
Yea I’m aware
So it’s a none issue then
I’m running a replacement cumberbund on my LWPC that has buckles
I still don’t know how I feel about swimmer cut plates
crye posting
But structural plate carriers are tight
ong
Yeah it makes sense
It has an application and il never doubt that they fulfill it
The pull tabs get stuck in behind the placard to keep them from moving or snagging
are you really a friend if you havent yoinked your mates QD's at one point?
thats why me and my friends moved away from QD's
plus we dont fuck with water so its gucci
average LARPers
Yoinking it wouldn’t actually pop the cumberbund off
😂😂😂😂
it's kinda like tubes in that sense
ROC or taktic?
The MK3 in Tarkov is based on the Tasmanian Tiger MK2 right?
everything is it’s real name
Oh you’re right
Male wife material
Average at home operators
average ak guy
sad part is i think its talking about the one on the right
with the ar
this one
cus it has the flag
what in the Chinese fuck is this

