#general
1 messages Β· Page 156 of 1
bella how you feeling?
I would break my legs which would hypothetically allow me to be more comfortable while sitting if my legs had no other uses than sitting
I breaka your leg if you breaka la pasta

saw you were feeling nausea earlier, hope you feel better
like I need 2 months of vacation with no contact to any people, work or anything at all
Aw shucks, sorry to hear - hope for a speedy recovery
felt like shit, and then my manager decided to scold me because a train was cancelled so I was late to the office, so I used 14 minutes to write a semi strong worded message back to them about it all
LMAO
don't mind the missing punctuations, I was on my phone in the train and mad @shut hawk
I was taking the train that I normally take to get to the office in an appropriate time but it was a connecting train that was cancelled halfway through my first one which means I had to calculate a new route, if I had to get any earlier I would have to be in the office at 8 as that's when the times I have, which means I would have to leave my house at 06:14 am just to get to work an hour before everyone else, and frankly I would like to have less travel time all together but this is the best I can do with the current salary expectations and work/school situation I am in which makes it quite difficult to change, the fact that I am in this situation and still push through with contact and working in places outside of the office to make due of the time that I have missed from being in a specific place would hopefully have been sufficient enough to get a proper response from you other than this.
I hope you understand my situation and I am doing what I can to provide value, but I frankly value my sleep and mental health over a job that takes me a total of 12 hours a day in travel to/from + expected hours sitting in an office, especially when it's proven that most of my tasks can be done from a remote position due to the frequency of tasks taking place physically in the office being low, with only some smaller manual tasks that are forcing me to the office.
I know you want to make me improve, but I am doing what I best can at the expense of my physical position and physical/mental health which I hope you understand is my first priority```
You tell em, mental health always first β€οΈ
hope they understand...
you sound like you need a good break
u need brain.exe for working if thats not in proper functioning shape then u are screwed
oh, they were like "it's all fair, and I have been flexible, but in situations when we have onsite work due to xxxx... I would like to know that I can trust you will be in the office in agreed upon, regular hours."
so shadow is screwed...... anyone got a screw driver to drive shadow through a wall????
I wish you could talk to higher ups informally
it's what 56+ hours a week of work for 5+ months in a row does to you π
but due to said school/work situation as talked about in my previous message I am unable to get the salary I need to not work as much just to survive
why would a screwdriver go through a wall
oh, I do lmao, this is the only time I have written to them in this particular language to insindiate that this is messed up π
Ifixit works?
CTF Player at TryHackMe
Lmao
Ahahahahaha
Guys, Any help?, I want to change to openwrt firmware, I have a DWL 2100AP A5, I have no experience at all.
I think This is the link from which I should download the required files or the required file "You will understand why I wrote "I think" when you open the second link"
https://archive.openwrt.org/backfire/10.03.1/atheros/
I don't know what file to download.
Well, this article talks about the type of my router specifically Through it you can understand me more.
you still working on that?
I?
yeah
Working for what?
working on something with wrt
well, figuring out how to work with wrt
I've seen you talk about it a lot
If you mean "Openwrt" This is a new project, I got the idea yesterday, I didn't mention it here.
generally routers then π
Yeah, that's right, most of the topics I talked about here are related to this.
hello who is a hacker
ask your question
Most of the people here, why?
Hope this project goes better than the others then
This is a really good question, it can provide us with additional knowledge.
just there are people that I would like to hack in a vocal discord possible that I invite you in oc and you give me their first name etc.
@mossy river
Please do not promote your discord here
Well, maybe this is really better, For me, of course, I don't know how others view this.
I don't promote myself just a person comes into a group then he fixes it
just there are people that I would like to hack in a vocal discord possible that I invite you in oc and you give me their first name etc...
Please avoid inviting people here, if you would like to use VC, you need to verify
just can someone help me i would like to have information from a discord account come pm pls
Please stop asking here, this is against our community rules.
What is the server used for?
Bro
This is a community dedicated for the TryHackMe.com platform
Hi jared
hi
@buoyant tree @boreal scarab i started cyptex print. will br 5x rings
ππ
πππ
ππππ
i had 9h print of 5x rings. tomorow 7h of encoders
Sorry, just looked good. Like stairs!
Hi bread clan
Odd question but is anyone aware of a way to open a Raspberry Pi image, so you can edit it within terminal without the need for Raspberry Pi hardware?
OHHHH that reminds me. Cura has Fuzzy. Now I want to print a tank with fuzzy print for it to look lime Zimmerit!
loaf gang rise
look at link and some pic and will be clear
you can lock inside things
it is. you can encode wehat letters is needed to open box/tube. so you are not wrong
Gorilla glued 2 "calibration cubes" to test its strength on 3d parts.... my hands hurt trying to pry em apart 
add alternative wall on infil and uze zig zag
Needed to test it before I glued almost 2 day print together
= extra strong
Turret angled, or straight on?
the arrow is open place. i can encode to any letter ofc
the what ?
M4A3 Sherman turret
go fdor what is simple for first time
... it's simple any damn direction lol. It's just gluing on... do I glue it when the turret is turned, or straight on
yes... pls do that π
Ah yes.. friction fit
This question made me wonder, although it seems meaningless for me, how can we tell that someone is a hacker?
Just because he was able to get a password for a random router by trying WPS PINS, is that enough to call him a hacker?
Let's not look at the technical side.
What is your definition of a hacker?
The message arrived a little late π
You hack
Like you know with your fists
Enough to ask a question like that, don't you think?
to sever, with a machete, that's even better
Well, the question may seem stupid to you, but try to think about it deeply.
RFC1392
@boreal scarab You know that wasn't appropriate for here
Logically, if you can gain access to what you're not supposed to perhaps
hacker
A person who delights in having an intimate understanding of the
internal workings of a system, computers and computer networks in
particular.
honestly yes in one way or another
Yes, this is the definition found on the Internet, but I think that with this definition we can call several people hackers just by doing very simple things. Such as changing my friend's Facebook password through my friend's phone without his permission.
From the above definition then, this too is hacking
Awesome thanks. you know, at my last helpdesk job as internal, we hired a security guy who only had a security+. but you are right, it should be all I need to get my foot in the door, I am going to focus on Security now instead, thanks so much!
Gave +1 Rep to @brisk tree (current: #300 - 16)
Script kiddy or basic level hacking, but still - hacking, call this one in particular a social engineering attack perhaps
Well, this definition from a point of view seems reasonable to me.
btw @boreal scarab i buy roll of ABS. will test it. is kinda quitre hard strenght
I am really finding it difficult to sleep...I am too tired to do anything productive, too awake to go to sleep, I should have taken melatonin, but it's too late for that...
This convinced me. Yeah, We can classify this attack as social engineering.
did you print the thing that goes inside of it
I need to try and print PETG or ABS if I want to upgrade my printer's fans to have more direct cooling
yes. all is printed
abs = need enclouser. petg = awesome. i print now some items
PETG it is then
Well, sorry, but is there any help, I really need it.
250c, 50 bed
assemble it
missing parts for now
Errr doesn't it say on the second link that it's not supported and the last update was over 2 years ago?
The version I want to download is much older, I think it dates back to 2011, but yes, version 10.03.1 is supported by my router.
Don't run software that's 12 years out of date
Incredibly unwise
Especially if it's internet facing.
What James said tbh
@naive violet
Well, this is not my router that I use to connect to the Internet, this is a router that I'm just using for experiments, which means I'm not really concerned if there are problems with it.
It's been in the closet for years, I remembered it today just to try this on it
Nah not again. I'm avoiding this entirely.
I un-broke it!!
Nice
What you mean by "Not Again".
And Why do you avoid this if this will not cause problems?
As I said, the router is very old and I don't really use it for anything. I don't care what happens with it.
Plus I will not run on it a firmware doesn't support it
Oh no! My laptop came with McAfee.. uninstall. lol
Trying to apply for jobs and Greenhouse, a CMS used by so many more companies than I thought, refuses to let me apply anywhere because it insists that I must be a bot.
this is dumb
uninstall? burn!
i'm still not 100% on board with the new taskbar situation ,-, i revert it on any VMs i need to work with
I've been using it at work so it's natural to me now.
Are you using a VPN?
Win11 is just like win10.. just looks a little different.
With more adverts!
I like my arch
every arch user will tell you that they use arch
I am actually uninstalling arch tomorrow
last day of being cursed
Installing Ubuntu for the weekend and then back to arch again
yeah I knew it, you cant get uncursed
I just don't feel comfortable enough with arch yet to play 2 high level CTFs yet and I have some stuff I want to redo on my setup to make it more custom and not basic
how
connected through my phone, no more network error while doing online recovery.
It's just an alias for Invoke-WebRequest right?
Yep
It seems you can get binaries for windows though
https://eternallybored.org/misc/wget/
Windows version of wget, the non-interactive download tool
Ah yeah.. powershell.. Forgot about that. π
Windows things.. lol
oh.. and.. update hell.. I forgot about that too.. π¦
See yall in a few weeks. 
did someone say windows? πͺ
eugh time for the meepity moopity sleepity sloopity sleep sloop to the beep boop while meep moop to avoid this feeling of blegh
Windows for gaming π―
Gnight shadow
With the exception of steam deck (if youβre looking for portable gaming)
wait.. so.. at McD's in UK/Europe.. do you order 'fries' or 'chips'?
o_o
Interesting. π
why not crisps?
Something entirely different.
Chips are a bit thicker, but not as thick as wedges yeah?
Oh they might just be wedges
except green potato or black potato
Do you mean just, a rotten potato, or is that a dish of some sort
rotten
Yeah don't eat those
we have the same division but within the country, half calls it 'friet' and the other half calls them 'patat'
Hi dolphin
hello π how is everyone
Ok!
π¬ 
That's cute, I like patat
my partner says patat but he is wrong
Good good, how are you
I haven't started yet! Soon though
exciting!
I just ate a tuna melt and the top of my mouth is now burned
It's gonna be fun. I'm just using my days off rn and slightly going insane
Too much free time is absolutely not good for me
I need a schedule and a routine otherwise brain starts maladaptive daydreaming π
For sure I may write a blog or something
Ouch!
I've been playing a lot of Balatro
I have a high sensitivity to hot things in my mouth ;_;
Highly recommend to anyone with a functioning computer
@buoyant tree progress...
Pain D:
Ohhh is this that thing from da Vinci code whatβs it called
Will there be the thing that destroys it if someone tries to break it?
there is pdf in files tab if wish to cehck details
!!!!
@loud marlin you are probably in camp 'friet'?
Cryptex!!
Speaking of tuna melts, anyone else ever call it a 'tuna schooner'?
I love these things
i had some ideas yes but i think i might get in trouble using some chemical from work ehhe
with mayo π
no question about that
i making one with 5 ring's atm. nice thing
I'm sorry mayo?
mmmmmm sweet potato fries
Sweet Georgia Brown π
Mayo and fries is pretty good actually I take it back
absolutely, in NL we have delicious mayo and thats generally the commonw ay to eat fries / chips / patat / friet
I like gravy fries
I've had a mayo based sauce with fries, never straight up mayo
i can build you one after this test one. if you wish to have it. need around 24h to print all the things but that's not so much
@grizzled crystal
Sounds really good
Instead of calling it Mayo just call it like an aioli
And everyone will go ooooo
Seriously? That's be amazing, thank you haha. I will buy it off of you, at least let me pay for the materials and shipping
Gave +1 Rep to @loud marlin (current: #27 - 296)
mayo doesnt have a bad rep in NL but it was a bit of shock to discover it does in many other countries
win11 is to win10 what win8 was to win7
Nononono.. Win11 is way better than Win8 experience wise.
Nope! Absolutely no idea what their deal is. Different browsers, devices, etc. Can only assume they don't like my ip addr for some reaosn
i need around 150-200g for this print. what is nothing. since 1kg cost around 20e. and 1kg is lot's of prints...
i can go up to 10 rings... and will send ypu pic for colors to choose
I did that once for a restaurant, I rewrote the menu with fancier names, for example instead of green salad, bed of greens from grandma orchid π
Maybe I should get into 3D printing... Extremely cool hobby to have haha
you have no idea... is god damn disease
Most people with a 3D printer go wild for a while
Yeah I bet
ayee
I have a calculator does that count
Time to research 3d printer prices for no reason in particular
Can it play balatro? If yes, sure
we had wood and carbon fibre printers up north
pretty sweet
never got to play with em tho
now that seems more fun to me
we have a 3d printer but... idk I dont like it.
most useful to print like, phone holders for the desk or whatever. lol
3dp is more enjoyable when you actually have a use case
btw @grizzled crystal
#community-art message
otherwise it's like wtf do i do with my 73rd spinny thing
i just buy 2nd one for 600e. flagship from creality. + creality is open source os
We have this. Itβs more like sawdust in glue?
my partner was printing a bunch of plant pots that were very small (useless because I like big plants), that took like 300 hours. Such a waste of time and resources
don't remember how it actually works but there's like actual filament
beyond that it's been a few years so π€·ββοΈ
Yeah Iβve felt it and talked to our 3D printing guy
smart guy π
We had a 3D printer in high school, it was cool, but i remember its materials were pricy
Honestly for me the appeal is just printing little trinkets. Whatever you can print is probably not too useful, considering it's usually pretty small stuff
sawdust and a low melt glue would make theoretical sense
yes
25e +/- is 1kg standard PLA. some do cost shit load for sure
i mean, that's how i make filler
sawdust from the same piece so it matches and some glue
So teacher would make us pay i think 5 dollars or smthn to use it per piece
I dont like trinkets because they end up as clutter in this house. Hence I dont think the printer is very useful for us
and I do not like clutter 8)
That's not too bad.. Hmm definitely something to revisit in the future
I donβt have space for a printer
@shell nova Sir, your 7 PM "Drink with the boys" is here.
Honestly would probably print figures lol
Fair enough! Trinkets do tend to pile up haha
Go sleep!
honestly the only thing that even garners interest from me nowadays is the sorta stuff you'd see in r/fosscad
otherwise i'd rather be working with my hands than telling a computer to do things for me
But it's 7 PM 
I'm a hoarder at heart, must fight the urge to collect objects
Woah, very cool!!
and yes. tehre is glow in dark plastic eheh
Iβd buy an AI printer, if thatβs even a thing, lol
May split the costs with a friend and then keep it at his house .. For my own sake π
smart
if i somehow end up with access to a priner again soon i do wanna print myself some mechanical stuff like a demo transmission
flipper box
Out of sight out of mind
yeah
there is AI in printers yes
Hehehe problem solved
camera watching print and if print fail he stops it
the printing
partner really just needs his own room where he can clutter and print whatever he likes, then its all good. but we share the office so...........
okay that's actually a decent use case
was concerned initially
Ah yes, he's got to compromise then
I guess its more like enforcement from my side rather than a compromise π₯²
also poki... here is speed of one i have. it starts at 1:15 min
https://www.youtube.com/watch?v=m6hSDt8hALQ
600mms creality Hyper-PLA 600mms speed test
I'm sure your company is way better than trinkets in any case! Win for him, even if he's not happy about the lack of trinkets
haha thats sweet. Not sure he always agrees π
Valid and justified
Rip
Damn looks like it gets to be on red bull towards the end π
Itβs so fast
Damn!!
When did these things get so fast
and that is not full speed
I remember looking at a video a couple of years and it was much much slower
im bit scared go full. dont wish to run for him outside house
this one have up to 20k acceleration. ofc onli can if is not detail print and so
20k mm/s
https://www.creality.com/products/k1c-carbon-3d-printer this is one i have. @glass nest have version before. but also can print carbon
Woah cool
nice thing is you can print things that you can't buy separate without whole machine or so
Don't worry you can make boxes to keep the stuff in
there is also a carbon fiber embedded PLA that you can use with any PLA printer. Only concern is that the nozzle may wear faster than sticking with 'regular' PLA
print all the boxes
yes. for carbon the big things is that you have full metall nozle
carbon nozle vs normal one
like that they have to have that disclaimer
also like how they phrased it, lol
well... i can tell you they are hot if you touch them when they are hot... 200+C is not funny to touch
sure but it's like putting a warning label on your frying pan "don't touch when hot"
there is good reason why shampoo says: not for drink...
I know quite a few people who need warning's like that
same. if you remove all the warnning from things... natural selection will occur
natural selection got us thing far tho
and some didn't π
perfect
did you check vid of how fast it is. that i link
didn't watch a vid but skimmed some speed comps
cehck up...
I assume the fan helps with those speeds
there is 3 fans. one on nozle one aside that blows on surface and one in back to pull out hot air from chamber
Wouldn't necessarily be a bad thing
ngl kinda happy with the high level spec and first impression
creality makes some good stuff
it also smells good
the plastic make no smell at all. some of them have dangerous fumes. so need exaust out for sure
ABS is kinda bad for sure
dangerous is what they want you to think
they don't want to share their powers
almost like brakekleen
well... better not inhale it for sure
The ender 3 had some smell
it actually can be pretty toxic tho. not sure HOW toxic, but it can be
like is it hoppes 9 in the basement toxic or death
PLA is full safe. no smell at all.
do you guys pronounce it azure or azure
I broke SteamUI let's goo!
i go with azure over azure
it's the same or the same π
definitely not
Hello there !
ello
@blazing granite context: azure, when it was just a color, was always aΒ·zhuor here, then when it became a cloud provider, all I ever heard since then was aΒ·zhr
yea.. best way to ask how to pronounce is to ask them... they will be happy if you ask them
the partial failure handling on this looks pretty cool actually
my point was that both names were spelled the same not even diacritic symbols to mimic stress π
they do have things to improve for sure
i'm confused . Are victims so stupid that they open suspicious links + download + execute the payload? π€£
yes
some ppl don't know better. also there is 0day's that don't need user interaction
...have you met people?
90% of security is protecting users from their own ignorance and/or stupidity
some ppl are old and dont know better when they download something
(normally ignorance, but sometimes both)
No but other than exploiting vulnerable softwares , sending links or pdf attachement in order to gain initial access ; doesnt make sense for me

pretty sure one statistic is like 90% of ransomware incidents start with a simple email
people are your biggest risk
thats so bad
0 days ?? for example a zero day in pdf reader that makes the payload execute automatically ?
that is a thing that could exist
π
Hi
π
wow I won the loterry π
it can yes
Hi! How are you?
ello tim
hello time
just wondering ; what are the techniques used by rresearchers in order to find a zero day (in a blackbox env)
intimate knowledge in things
a lot of research and try and error
for sure can. but they are not so "walk in park" to find
Yeah sure
selling it in general is unethical imo.
disclosing it to the company is the right thing to do.. and if you have a fix for it, disclose that too.
even if you don't get paid for it..
thats what i meant actually
but my english is poor
your english is fine, don't worry.
note that withholding information about a vulnerability because a company doesn't want to pay a bounty is pretty unethical in itself and annoys the shit out of whoever you're emailing (tantamount blackmail)
so if you're gonna report, report even if they don't pay out
Me personally, I wouldn't do it. Let someone else figure it out.
Thanks is enough π
Gave +1 Rep to @molten sky (current: #69 - 89)
the fun part is deciding if a company will want to ruin you or if they'll actually say thanks [ref]
Gave +1 Rep to @floral geyser (current: #2068 - 1)
Does that happen often?
eh probably not as frequently as is may have in the past, but it can happen
there are people who will help pass along reports anonymously just for that reason
Ok, but did the journalist take advantage of the SSN? Did they get arrested?
nah they handled it exceptionally well actually
(the journo, i mean)
Renaud first disclosed the exposure to the state on Tuesday and waited until the issue was fixed before publishing his story β a well-established best practice in cybersecurity reporting.
But after the story went live, Parson held a press conference Thursday slamming Renaud as a "hacker" and calling on state prosecutors to conduct a criminal investigation into his report.

I mean maybe because testing is illegal
pressing F12 on your keyboard isn't testing
the guy literally just noticed that SSNs were being included when the website loaded
hacker ...
Yaayyy my thingy works
i was close to what it is π
https://www.reddit.com/r/Hacking_Tutorials/s/QYB7FWddKr
Popped in my reddit notification. Right up your alley 
Yoo
o/
Is anyone else not able to log in to the try hack my website?
maybe it was hacked
Seems like it the captcha will not work even for customer service lol
Just hate to lose my streak again
try clear all cookies for thm site and relogin then
Don't you have streak freeze
Yes, but I have a surgery coming up and will need all that I have
Donβt even worry about streaks
Goodluck !
I hear you but I have been at 215-235 three times it is more a personal have to finish.
Thank you!
Gave +1 Rep to @pine stratus (current: #1376 - 2)
What's up guys? Been pretty busy lately and haven't been on. How is everyone?
β¬
Quick question for anyone who may be online and may know the answer.....Is there any possible way at at all to prevent your email being harvested? Any type of provider that has such a feature, that disallows automated processes from obtaining your address? I grow tired of amateur attempts from someone trying to phish me out
Void
mail letters
Is that a serious suggestion? If so, what letter would I mail? I have doubts that would help much. Care to explain?
I put my toss away (unimportant)) email on my wife's phone a while ago. She isn't as tech savy as me, so they got my account before. I recovered account, no problem. Only thing they did anyways was just setup everyday reminders on my calendar they would ring an alarm every so often. More annoying than anything. After I recovered account, I changed password immediately and just deleted the entire email account shortly after. I guess a partial answer to my question would be to email the individual sites themselves my email is associated with, not the provider it comes from. Each site has their rules and robots.txt permissions. So, only way I know of, is to email each site and ask for my info to be removed
I'll probably have to use the same method they did in order to find them all, some harvesters, OSINT recon, and lots of emails seems my best bet. Unless anyone knows anything better.
Hello there
Good Morning
Is there any referral system on tryhackme..
My classmates also I told them to join thm..π
Not too sure, haven't been on in around a month. Definitely should be easy enough to check if you log into your account. If it exists, may be located in settings or somewhere related to account subscription page. I do know they have "teams training" feature but I believe that requires an additional subscription aside from the standard premium account
prevent from being harvested? i'm not entirely sure if possible.
having your data opted out of from databrokers post harvest might be next step.
I know someone is scraping sites and harvesting my emails from somewhere because I get these pathetic phishing attempts sent to me, but also about 500 others simultaneously (slightly exaggerating π) because there's an A-Z list of emails in the "sent to" section.
I suppose another route could also be to use a provider not listed on the "clear net". But TOR is sooo slow, and it'd probably end up being more of a hindrance than a help. Even then, it can still be targeted for harvesters, just not as frequently.
If you aren't familiar with the Podcast Cyber Sector 7 I would suggest that to you. It seems to me that the shows subject matter would be of interest to you.
Will make a note and check it out. Thanks
Gave +1 Rep to @naive dock (current: #714 - 5)
Not necessarily....often sites will ask if you WANT to log out of all other devices, but doesn't always do it automatically. Look for a feature, before confirming password change. Should say "log out of all devices
i don't wanna be rude and not answer but I don't know
OK thank you
Gave +1 Rep to @lavish shell (current: #317 - 15)
@slender scaffold https://youtu.be/16gSeaqC56c?si=2HcygxzatdFkO56k
Morning
O_o

There is.
Click your PFP > refer a friend.
@sick lance how are you?
I'm OK, you?
Throw a captcha in front of it, boom scrapers gone
What is PFP?
Thank you so much... ^^
I got it.. π
Gave +1 Rep to @sick lance (current: #1 - 2209)
Sounds like you've been hit with a breach and not a scraper, or that there's a login to a website that sells your data 
I did not consent to being born! Now I'm forced to work for people because I'm mentally stable!
have a check at "https://haveibeenpwned.com/"
morning
nice hate when that happens
Interesting
I have begun to just use shortcuts lmao, I don't use my mouse that much
I needed some help, some guy got my number and has been making threats to me, what can I do besides call the police?
Any and all suggestions are highly appreciated, apparently they're a community leader of some sorts, and boasting how they're going to hurt me and my family, I pissed them off by posting screenshots of our texts where he tried to bully me into submission, is there anything I can do about him having my number?
block the number
either it stops when you don't respond for a longer time, or you just get a new number
that's all you can do
Fun fact, an octopus Is just a wet spider.
Yes π₯π₯π₯
Yah?
Customer: we would like to get a better network solution for our building, your routers doesn't work
Me: alrighty, let me check for a solution
Customer: oh btw, we have lead lined walls
Me: huh.png
Customer basically wants wifi in a big faraday cage

Just put a router in every single room and then bridge them all together
possibly
I use shortcuts 90% of the time too, but when you HAVE to scroll, like in the discord chat, or on web pages, it gets really really annoying without a working scroll wheel
Ruh roh
yeahhh, I would probably not speak to them again
Is it common for walls to be full of lead?
nope
Maybe they're trying to be ready for the nuclear holocaust
time for me to find solution
Good luck
Maybe see if they want to buy 500 routers and then they can use my idea
A whole wifi field per office
can't say much other than, first time i've had that request lmao
Ethernet π
going to my first gaming expo tomorrow π
fiber optic cable
ethernet would not work in this situation either
Oh you mean for the specific situation
π
Got it
yeah don't worry
Fine inside the cage at least, just not between
well it's the whole building
not just a small cage π
Maybe they can just knock down all the walls
Well, just the inside ones. That way the inside will still be inside
Hello Everyone? I want to replace windows with Kali, in that sense I will be able to run kali linux on bare-metal (as my main OS). How can I do that? Do i have to create a bootable usb? Can it be possible to install kali from phone's internal storage?
I would not suggest running Kali as bare metal, it's too unstable.
If you want to get away from Windows, have alook at Ubuntu.
and have Kali as a VM.
Fedora π
only thing I could think of is put a WAP in each room, but that could get pricy quick
the language doesn't matter much, the functionality and sanitation matter mostly
Not very common, only a few languages support inclusion like that
php is just the most common language used
One of Ruby or Perl does
I think it's ruby
yeah, php has sharpened their default configuration
can node communicate with host files?
Just remember, LFI is when it's loaded as a library/code to be ran
Otherwise it's abritrary file read/directory traversal
Basic feature of a programming language is reading and writing files
Checkout advent of cyber 1 task 15 apparently
I haven't used any backend js, so wasn't sure lol
Gave +1 Rep to @shut hawk (current: #14 - 511)
@lone thistle Helldivers now requiring that you link your account with PSN in order to play the game βΉοΈ
Rip eastern-european people
not really
you can do without
huh?
Honestly they'll likely revert it, big negative reviews and refunds
No they're bringing it in as mandatory now.
That's the whole thing.
Attention Helldivers, Due to technical issues at the launch of HELLDIVERSβ’ 2, we allowed the linking requirements for Steam accounts to a PlayStation Network account to be temporarily optional. That grace period will now expire. See details below in this post. Account linking plays a critical role in protecting our players and upholding the valu...
It's not arrowhead themselves doing it, but Sony (because they're the ones who published the game)
I'm sure they'd want to, but not sure about getting that past Sony
The refunds hit extremely hard.
It's not just losing the income, there's huge additional fees associated.
Also, Steam don't really give refunds after 2 hours playtime + 14 day buy period right?
They do in exceptional cases like this
Where the vendor bricks the game afterwards, they're known to.
Hmm, will be interesting to see what they do - I do believe that since launch it has said on the main page that an account will be required to link to Sony, but they temporarily removed that restriction and now it's being enforced
You underestimate customer goodwill.
No, the player base is of course pissed and will want refunds but AH are locked in a contract with Sony, and it was said from the start that you'll need an account. They really shouldn't have temporarily disabled that restriction because of this exact situation, but I'm not sure they'll revert it or if steam will start handing out refunds willy-nilly because people didn't fully read/understand the part about linking an account OR it wasn't clear enough when purchasing the game
We'll see
Can this be played on ps4? Or just 5?
Both I believe
Steam gave me a refund after two hours but I 100% guilted the support agent
Lol it's all kicking of in the HD discord
Oh, lmao
Any TypeScript devs want to hop on a project? Drop me a DM
Damn got my new glasses in less than a day π€£
π
no bella, you don't need any more projects
You also have to be comfortable working as a team π
Free donuts to anyone who joins
you're driving a hard bargain
installing autopsy on arch π
This lat pulldown machine has to be in pounds not kg
I swear all the weights here are lighter π
I change gym and Iβve moved up in everything
Or you're stronger.
Start using stones
One of my training sets is a 3 metre run with a 40kg Atlas stone.
Ew youβre one of those cardio people, huh?
Scrubz, has it ever occurred to you that we might be the ying yang equivalent?
i love cardio. gives me time to think
Youβre blue, Iβm red.
I do strength training, you do cardio
A few times!
Youβre in Scotland, Iβm in England
i do both
I just try not to starve
Strength lets me take out all my anger and frustration in a 60 minute gym session π
i do the incline 12 speed 4 on treadmill ahaha
im impressed that im 5'3 and can walk speed 6.5 on the treadmill
I can do treadmil, not a fan though.
I don't like running for 60-90 mins and getting nowhere.
I don't like walking. I swim πββοΈ
Cars are stupid in a lot of ways
i dont swim i just bob up and down in the pool and relax
Like a bouy.
guys what do i need 2 get a cyber security job ?
5 years experince
Dedication, hard-work and a keen learning attitude.
π
get your bachelors first in relevant field
bro thant is 4 everything
Then sister, you already know the answer to your question.
Experience/Certs can help.
homelabs, projects etc.
Anything to show you're interested.
network be active on likedin
i think i made a bad choice when i joined this server
π¦
- am brother not sister π¦¦
You're not my brother though.
Why do you think that?
yeah u r right
because of your answer
everyone will tell you the same
π€
its very competative and difficult to get into without all those things
It is what you make of it.
You can either have that attitude, or not.
What do you need help with?
If you can show the hiring manager you're some kind of genius and way smarter than scrubz than u can prove him wrong
Good luck! π
This is a great field, so much to do, so much to learn.
which country is affordable and good for education
i no longer have hope in this system
You don't need to DM me, ah too late.
Read the rules please π
No idea which system you're in.
99.6% gets u 10000 rank and u dont even get cs in a good college
i wanted to sharescreen but
other private uni have currupt systems
icked up _JAVA_OPTIONS: -Dawt.useSystemAAFontSettings=on -Dswing.aatext=true
Your JRE appears to be version 21.0.2 from Debian
Burp has not been fully tested on this platform and you may experience problems.
a less population country more likely
This is happens when you install Burp on Kali/debian, it's fine.
when i try to open browser in
root?
take a snippet of it and send it to the room-help channel

They haven't said if it's THM or not?
Could be their own machine.
Scruuubz
You're rignt never mind.
I have issues with installing autopsy on arch π¦
That's a sign.
so it figures i have no idea how to fix it
narh, I think I got it to work now
What did you use to install it?
idk wasn t it installed already
What error does the proxy say?
What are you doing?
I just used the AUR package for it, but yay breaks, so I went in to patch the binary and just makepkg directly π
cause Java17-openJFX breaks
typical java moment
Don't say J word, Hydra will pop up any minute now.
does eu countries have inflation of anything goin on?
and do they require u to be high tech with their own language
I have no idea, I haven't tried changing country.
Tech in denmark is pretty english based
I speak english 80-90% of the day
and only danish 10%
for a student
I am a student
living cost etc?
Depends on where in Denmark
lets say avg ?
java.io.IOException: Cannot run program,error=13, permission deny
i m gonna end myself
try sudo
This is harsh, not funny to joke about stuff like this.
Just click ok,
Burp borwser doesn't like being run on root.
for me it's ~15000 DKK a month (7.5 DKK per Euro)
a month?
ye
the compiling takes so much ram that my laptop reboots lmao
5200 DKK is a 64mΒ² apartment
do u use bhk ?
bedroom(s), hall(a.k.a living room), and kitchen
so, 1 bhk is 1 bedroom+hall+kitchen, and 2 bhk is 2 bedrooms+hall+kitchen
You guys count a hall as a living room?
I got 1 bedroom, a hall, a living room, a bathroom, a kitchen and a balcony
What a hall
well, hey, it's small
wut no
this is a hall
not here
Hall has a different meaning in every country, in my country, that's what a hall is π€·ββοΈ
Is that a translation issue or?
nah, not a translation issue, they call the living room a hall
been like that for ages, I think
Yeah, I know what a hall is. People call a living room a hall here
please don't dox my house
Too late
Ohh
dw that isn't a picture of buckingham palace
*your majesty
Whatβs everyoneβs thoughts on the CySA + to break into an entry level position?
You really overestimate my respect for the Monarch
Depends on the position/ job market/ country
North America, SOC lvl 1
Look at jobs in your desired area and check out the requirements.
Furthermore, research if the certification you want matches with skills required for the position
Iβve seen job listings include the CISSP for an entry level position
Thanks
Gave +1 Rep to @mossy river (current: #6 - 1231)
What country though?
United States
North America
what country though
HR puts CISSP for a requirement on a lot of sec jobs.. They usually don't know what it even is...
Yeah itβs really frustrating cause the sorting bots they use for applications see that you donβt have it and throw it in the rejection pile
Sec+ is typically the first entry level cert..
the current one, has probably the lowest respect ever π
how often is OSCP required?
Iβve got the sec + but I want a better chance, ya know?
You are trying to please HR.
Regardless of whether they know what the cert is, at the end of the day you're trying to get the job.
I've only seen it listed a few times..
Hit em with the βoh yeah, currently studying for that!β lol
oh damn
tbh you couldn't beat lizzie
Nice to have, not req..
probably very important for red teaming positions
got it
Indeed, she was amazing
Burn it.
I do NOT plan on working in India, it's just a very fucked up work culture here lol
look at the swap
HAHAAHA
Accidentally made a 250gb swap file instead of 20gb
My math wasn't mathing
Oh no. Lol.. Bella... π
Hey hey, at least now I can compile java!
Small wins.
that picture is of my arch compiling java
Yeah!
I believe this are hectic days for you with the CTFs and all, your poor brain maybe is saying give me a break π
I just thought "oh yeah I need 20gb swap, what's 20gb in bytes"
Totally forgetting it's multiplied by 1024
π
@shell nova why java take so long to compile
cuz you need to give it the beans
is THM having issures today?
Like what?
My connection has been perfect.
i'm not able to connectr to the vpn
#site-support please π
gotta laugh at how horribly helldivers 2 just got killed by stupid on a whole nother level
what they did with the sony account thing means they are breaking laws
https://www.stopkillinggames.com/ will have a field day on this
yeah HD2's discord is on strike.
yup
I ain't playing that game anymore due to sony
contacting for a refund still
Why is your Burp Suite: Basics room so broken? Incredibly laggy and freezing 2 days in a row. I've done over thirty rooms and have not experienced this. Not even with machine launched just answering questions and reading too
Vm or attackbox?
I don't even have anything launched yet
which game
The cursor disappears and lags, the page loads and then when you scroll there's parts missing. I don't know what's going on. It's just this specific room.
#site-support and link the room, somebody will be with you
helldivers 2
ah
Thanks
Gave +1 Rep to @sick lance (current: #1 - 2211)
@sick lance
howdy people!
@winged basin no self promotion please.
well iam an indie developer need some downloads
Also don't post accross multiple channels.
struggling to find downloads
Regardless, this is still a no self promotion server.
ok
Formato da resposta: * ** como faz?
Hello. This is an English speaking server only.
DM if you need help in portuguese
Hey @sick lance, can I DM you?
Why?
mentoring question
because you're compiling to native with Graal and it's got to figure out what you're actually using in the JVM
Sure
ur pfp is cute lol
i never looked at it fully till just now
I might just download the precompiled binary ngl
It's Javaβ’οΈ, add more beans.β’οΈ
I used 264gb ram and it still took over 30 minutes to compile
And 12 cores
Was disk IO peaked?
If all else fails, blame the developer. π
DM me π
@umbral bay Hi! How are you??
Compiling used to be the single biggest part of a developers day
DNS, and printer too π π
We have servers for that now. lol
π

Yeahhh
nowadays the biggest part of a developers day is reconfiguring neovim
Man the 105 is fun, especially since they added hullsplitting
Enjoy
Especially at 3.0
am I going insane or does google docs keep moving around all my images
like I'm writing something and then I scroll backup and all the images are cut of the page π
@cosmic tusk at this point go to sleep
at this point go to sleep
Copy cat
Copy cat
π€
π€
π€
Thanks! I usually play Germany, currently at 6.0, but I wanted to work on my American tree, especially that M4A3 
Gave +1 Rep to @naive violet (current: #2 - 2133)
I got to about there on the german and american trees, mid 4.0s on british
I'm at 3.7 for American because of the m4 on the premium side
Main tree... 3.0
The Sd.Kfz 140/1 was NASTY when it was at 1.3, they bumped it to 2.0.
When I say nasty, I mean that thing can tear through any of those tanks without breaking a sweat.
is vencord safe?
hi , are certification like sec+ requires experience in order to be able to pass it ?
no, just read the book to pass.
I don"t understand you
is this a sarcasm ?
It breaks the discord tos which can lead to your account being closed.
Please don't discuss breaching the Discord terms of service here
Okay thank you !
Gave +1 Rep to @wild rose (current: #300 - 16)
I had to google that, I should have assumed it was a discord mod.
Indeed, that cert is kind of entry level sec doesn't go too deep on things
Watch Professor Messer on Youtube if you want a different source material to study with.
Professor Messer is the best π
He has a lot of videos about A+, Net+ and Sec+ and also does live quiz/study session
yeah he's great. I wish he was around when I first started.
on the live seasons, he gives, a 1-800 number that you can call via skype without credit (if you're not in the US) and ask questions π
at least he did that in a few sessions I saw a few years back, IDK if he's still doing that
I called once π
his setup and content are legit
@naive violet took 6 tanks to kill me in an M4A3.... oh I love this thing. Easy kills, easy survives.
I got the udemy course
6 tanks?? hardcore π π
Is it worth it ?
depends who is giving the course, udemy can go from 100 to 0 depends who gives the course, the site itself doesn't have a quality control

more were on my front side. but it took them awhile to pen me. Also... this camo
I love that camo
I just wish I had played when they had the flashing yellow light
I'm to missions away from my CH "Inferno cannon"
His study sheets are so condensed it's excellent if you love data overload for your eyes to peruse
"How much of a target do you wanna be?"
YES
I know, I follow him and been to a few of his live sesions
Better than my 4 waifu body pillows peaking over the bushes giving me away when I play JP tree
Or using em as ERA
π
You can't get free waifu body pillow decorations and not use em
I only want that premium Clickbait abrams to set one in the chair
But not spending, what is it 70 bucks?, just for that lol
Guys suggest laptop. Not mac. Need it to be thin and preferably made of metal.
are you only running windows or do you need good linux support
cause some laptops are finicky with highly proprietary hardware (glares at Surface)
I need only linux support windows is secondary
Oooh
Thank the lord its friday
I used to be a fan of the XPS lineup but that was several years ago, not sure if things have changed
I've also had good luck with Dell's Latitude lineup but those aren't as pretty
Hmm shall check this out
What would you say about the linux first laptops?
System76
Framework
Idk anymore
We're actually looking at grabbing a framework or two -- only reason i left them out is cause i wasn't sure if they met your "thin" requirement or not
Haven't played with em yet but they seem to have proper linux support in mind
Lenovo
(it's even advertised as such)
Oh by thin i meant not gaming laptop thickness
that's reasonable then, opens up the door to a lot
Have an IdeaPad rn. Honestly the number of times I had to ressurect this thing
Keycaps literally falling off
my monitor is literally falling off of one of my Latitudes and it's still kickin
That's think dude
Thick*
thiccpad
Lel
My dream is framework but I need to get it imported
works well on mine
Idk if it's worth that


