#site-support
1 messages · Page 105 of 1
For payment related issues , reach out directly to support on the email below 🙂
thanks
Hey everyone, I need to report a possible bug I found with the site, anyone know the best place to do that? I tried to use the feedback page but thats 500 chars or less
Try to do it in #1333993673381253162 channel 🙂
Thank you!
Hi guys. I want to recover an email that has not been completely disabled, it has no 2fa just a phone number which is not active anymore therefore it is impossible to get a verification code
This doesn't seem to be a THM-related concern?
Get in touch with the support of the service you're having trouble logging in
hello. today i'm entering the gold leage.. fist day. and I wonder if it is possible a score like this.
Yeah it is
Wow... he already has the score that we who finished first in the league last week got.
That's just the number of events .
I Know, but I noted this because he is the number one in the gold league right know.
He has 1400+ points, just gained today.
But ok
Not a big deal
Hey does anyone know what the "league locked legend" badge is? is it just to acknowledge the bug from the end of the first week of the league?
@quiet ruin I'm stuck at smb_login module in **metasploit ** and unable to find the SMB Password for the user
Either the trackings off on the league or there's some mischief. I've seen multiple accounts jump up 400-700 points in a matter of minutes
I mean theoretically it’s possible
300 points isn’t something that is very hard to achieve and some CTF rooms might even give more
If they are experienced it is only a matter of minutes to some
its possible i would think fairly improbable though. This is a 5-10 minute range. But maybe. It just seemed odd to me
might just be my inexeperience though
10 minutes is enough to complete a CTF which gives you 300 points
everything comes down to how good you are 🙂
thats fair. Do any give you 500+
how to pause target machine
What do you mean by pause?
thank you for the clarification
Gave +1 Rep to @ember osprey (current: #1 - 4623)
I didn't receive a badge for the silver league. I think I was 1st place with a large lead
Try to mail support directly
Is the same issue again?
Im not getting put into the gold league
After completing 2 rooms
when your going through the tasks and you start your virtual machine and it gives you one hour and then the machine will expire and be terminated. i thought you could pause the timer for some reason so you dont waste the hour your given. do you know what i m talking about?
ohh... the Attackbox you mean? If that is the case, I'm afraid there is no such capability at this time.
yes, thank you for the clarification. i appreciate your time.
why do I have 0 points when I finished 2 rooms + was #2 place in silver league?
What do you mean?
I mean that I got no points for completing 2 rooms and haven't got the points for finished second place in silver
@glossy cargo
Which 2 rooms have you completed? If those are quite old, it is understandable if it does not award points any further.
I was doing the CTF collection Vol.1 room (answered around 13 questions), and I finished two to three other CTF rooms and got me to 300 something points, but the odd thing is that after completing the CTF collection Vol.1 room, I have a total of 600 points in the weekly leaderboard, which is supposed to be the amount of points just from the CTF Vol 1 room. shouldn't I have much more points?
(Emailed to TryHack Me): Apart from this, I also did not recieve the points for first place in silver in the last week leaderboards and no badge.
Rooms give less points over time , this is a pretty old room 🙂
ahhh, ok, thx!
Gave +1 Rep to @ember osprey (current: #1 - 4634)
If I used my streak freeze and then continue my streak, how long does it take to get another and how do I know if I have one available?
You can often win them during some events like hackfinity or aoc
To find how much do you have hover over the streak icon 🙂
Is it just me or is the message not very clear? I've never seen it say anything different before, I assume I don't have any left even though I've only ever used one
yeah you don't have any atm
thanks for clarifying
hello, sorry that I bring this topic again.
I think something's wrong... if everyone starts cheating and entering copied results, or in other unethical ways:
- Nobody learns anything.
- The top spots, which are intended for those who move up the league, will be occupied only by cheaters.
- By playing fairly, we'll always be outside of any recognition.
I consider it highly unlikely that someone would learn by getting 4,300 points in one day (with 600 activities completed).
And it's funny because yesterday I was surprised by the 1,200 points, but this tripled it in the same period.
The leagues are just a competition of who can copy-paste the most. What the people doing it don't understand is that they are completing rooms that they'll forget about later and won't come back to them because they are "Completed".
They're losing their money basically.
But I agree that it is unfair to people doing it regularly - and fairly. It might also motivate beginners to just copy-paste. It's also bad for THM's marketing if the website becomes a copy-paste festival. Newcomers will just leave.
thank you so much.. I was afraid that I was the only one who noticed that.
I love THM and I try to be persistent since 2021 on the platform.. I love the idea of a league.. even I invite my partners to participate, but I think this mode requieres supervision or add some new rules.
Gave +1 Rep to @austere horizon (current: #88 - 88)
This is me after spending over 12 hours on the platform. So IDK how this person got 600.
my best was 138 at 2021, working a entire day on this.. and as you see.. this was in the time where writeups doesn't were "unleashed"
I have like 119 events today and it took me 4 hours
The points depend on the type of rooms you complete
The person did not mention the points, they mentioned the events.
Regardless of the points - 600 events is a lot.
yeah, that's definitely weird
4300 points he got..
what's your profile?
Same name as my discord's.
oh yeah, my bad I didn't capitalize k
the league system is kind of bonked right now because I got promoted a league, then demoted, then promoted twice yesterday, but I agree that the copy-paste thing shouldn't be condoned. that doesn't really align with competitive spirit imo
Then the question would arise though, that how do you stop this copy & pasting or even confirm that someone is doing it?
Very hard to implement. It could be dynamic flags, it could be purging write ups containing flags.
Purging write ups would be too far already, as it would negatively impact learning as well.
Dynamic flags is a great idea, but I think it's not easy to implement it as you said.
Incorrect - Nothing will be impacted if you only allow writeups that have no flags.
Everything else will be fine, but then people would be actually forced to do the room.
The writeup would be the same - Only the flag would be removed or blurred.
So it's like a change of 4 words per writeup.
Yeah, I guess so if just to remove the flags.
Yes, just the flags.
It's a lot of manual work though?
Other platforms do it really well. 🙂
where's the allproblemsolution AI when we need it? XD
I think you're onto something with that
Well.. I guess it would somewhat make everyone do the rooms all the way by themselves, but cheaters will always find a way..
Dynamic flags would be an excellent idea though
I wouldn't know how to implement that
hey, who knows how long it takes for the room to get approved after submitting ?
what about a hall of shame? if we can't prevent, we can expose them.
Anywhere between 12 months and 18 months.
damn, thanks
forget about HavenBreaker, we have another "allmighty bruce", with 520 points more than Haven.
salute the N1 silver league and now N1 gold league.
4856 points in 1 day.
Hi Admins, Id like to check with you that I lost my streak, I reached 140 days but when I checked today it back to 0. You can view my activities page. Please dm for username
Hi! i am trying to complete the shells overview and nothing is showing up the page. i really want to finish the cyber security 101? and would like to learn more about shells?
hmmm, any update to the deployment failures with Defending Azure - MS Sentinel: Investigate (Lab-05: Investigate Incidents)? I noticed a few others above with similar failures as I'm getting. I tried to redeploy and relaunch but no luck. I am also noticing issues with other labs not working like the KQL (Kusto): Advanced Queries.
Can you please verify and provide a screenshot 🙂 ?
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
You can ask staff to restore your streak . You can send them an email on the address below 🙂
I refreshed this room once after receiving this error and came back again. I have the Attack box on a separate browser tab (working now)
i have norton anti virus
its been fine till this room
Disable it temporary . Some AVs block these page due to words like rev shell and some payloads present in it 🙂
only purely for that specific of that room right?
Yeah 🙂
does it work now 🙂 ?
Thank you, email sent
Gave +1 Rep to @west chasm (current: #67 - 130)
i might try it later on my other laptop
Hello, I am having issues joining this room: https://tryhackme.com/room/breachingad
I have reached out to support, but no answer. I am signed in, but when I hit join room, nothing happens
Are you a premium user ?
no i am not
Then you need to have at least a 7-day streak in order to access this room
Even if it is labeled free?
Yeah , it is free , only request is that you have at least a 7 day streak
ahh ok, that makes sense. thank you so much for the quick response!
Gave +1 Rep to @ember osprey (current: #1 - 4639)
i completed this room but havent recieved the badge yet
same with silver league badge
Restart the room progress and complete the room again
anyone else getting VM parsing errors when starting a machine?
Same here, I was about to ask the same.
Attackbox is working fine but I can’t launch the room’s VM.
Already tried to clear the cache of my browser but it didn’t solve the issue. (Tested on chrome, edge and firefox)
me the same all windows and linux vm can't boot
attack box works fine but not the vm
@agile oak @limber shadow @heavy hazel I forwarded the problem to staff 🙂
thanks
What's the reason?
Oh no, an error occurred while starting VM: PARSING_ERROR
staff should be looking into it @jade ferry
Thank you, please solve it as soon as possible
I am a security enthusiast in China, and I am using THM for learning. I am a subscriber. When I use the immersive translation plug-in of Chrome browser to translate the site, a white screen will appear when I submit the answer to the question.
Yeah a lot of users reported that problem with translator but that's probably out of thm reach
Still hope it can be solved, there are a lot of THM users in China@ember osprey
machine doesnt deploy in linux shells room, what to do?
any eta on fix yet?
Staff members are working on fixing it
Staff just started working on it
It will be soon hopefully 🙂
Thanks for the update 🙂
Gave +1 Rep to @agile oak (current: #2822 - 1)
first rep Pog
@jade ferry @scarlet magnet @limber shadow @heavy hazel Problem should be fixed now 🙂
By the way i know the ms sentinels analytics part doesn t work but i figured out a way to complete the room.
Go in the failed deployments section and visualize the template for the rules, then search the rule query and replace all \n and
Then you can use that query in KQL advanced mode to retrieve what would've become an alert
All right, thanks for your hard work
Thank you for the update! 👌
Gave +1 Rep to @ember osprey (current: #1 - 4645)
ty
Gave +1 Rep to @ember osprey (current: #1 - 4647)
Hello everyone,
I've been trying to access the target machine on IR Playbooks room for one week now but am not able to. Could there be a problem or changes made to the room recently ?
Thanks in advance.
What is the problem ?
I'm running into a "502 - Bad Gateway" error . I've tried troubleshooting all necessary causes including relaunching the machine, clearing cache, disabling my VPN to avoid conflicts, and even checking my firewall but have not been able to fix the issue
Allow 15-20min for machine to fully start up , presa F5 from time to time to refresh that page .
Hi, just wanna know if the student discount only applies for annual subscription? thanks 🙂
Yes 🙂 . Currently only to annual
Can we monthly if we pay without the student offer ?
Yes , monthly sub is still available but unfortunately not for a student discount at least at this moment
alright ty
I have not succeeded in resolving the issue yet
Hello.. I use microsoft Edge and happens the same.. I manage this problem with 2 tabs.. 1 translated, and 1 original.
I think this is too troublesome. The website was working fine at the beginning. I can't figure out why it shows a blank screen after the translation.
the nmap commands are not working in the network services room. Kali linux vm using the vpn
Hi anyone knows the elk challenge I. THM?
Been encountering kibana server is not ready yet issue
Can I see a SS?
Please wait a bit it can take up to 20min for machine to fully start up , refresh the page from time to time 🙂
does support actually work? I have had a ticket for 9 days now with no help
im trying to buy premium and its erroring out on all my devices saying sales tax rate can't be calculated
They don't work on weekends + it was Easter this weekend . They will probably reach out soon .
its been 9 days friend
Yeah but the last 4-5 was a holiday 🙂 .
I see you did not receive the badge. I tried the room and it worked for me to receive the badge.
Would you mind noting down the answers and resetting the progress using Options > Reset Progress and redo the room? After that I can recheck for you.
Sure
While proceeding with the translation on the THM site, when I submit an answer,
the site freezes and nothing appears,
it is plain color, nothing appears, I have to press F5, what should I do?
*I do not accept the suggestion not to use translation.
*Cookies cleared, plugins whitelisted.
Well this is outside of THM's power probably 🙂
So what should I do?
Try without translation enabled or try different browser
ok
hiya! It's not a site support per se, but can somebody please disattach my thm token from this discord account? I don't think I can do it myself.
You'll have to DM a mod such as Scrubz.
ok, thanks
Gave +1 Rep to @austere horizon (current: #85 - 91)
Hi I really need help, Im connected to openvpn and even though I can connect to 10.10.10.10, I still don't have access to the virtual machines within the rooms. Ive uninstalled openvpn and redownloaded it multiple times, deleted old configuration files and have tried new ones, and even switched computers to see if that would help. Still nothing, I need an answer asap because my professor is grading all of our work through tryhackme rooms. I feel like it has something to do with my "Internal virtual IP Address" on the access page. It says 0.0.0.0 not sure what would of caused that.
It worked for the first two weeks and stopped working, I have screenshots to provide a little more information to what Im talking about
Try: sudo apt upgrade && sudo apt update
And regenerate vpn configuration (after regenerate wait 2-5 minutes) this work for me
Issue with Task 7 of the insecuredeserialisation room, question for uname -r : I keep getting answer with format x.x.x but the box format is x.xx.x So my answer is coming up wrong when entered of course. Could this be a format error in the box? I’d only assume it’s my answer, except everything else is coming up correct and when I checked walkthroughs they have same format as mine. I’m doing the task, not just getting wt answers btw. Can someone verify?
bro idk what this means 😭 im also on macbook if that helps at all, im asuming u mean typing that into terminal?
and should i download another config file after regenerating?
Open up new terminal and run this command sudo ip link set dev tun0 mtu 1200
Thank you, that worked.
I sent an email to tryhackme about not receiving my Silver League badge (1st-3rd place), but I have not received a response in two days. Should I just keep waiting? I can be a bit impatient sometimes 🙂
Yeah , they don't work on weekends + it was Easter holiday until yesterday 🙂
ahh, ok! I'll wait a bit 🙂
do you also get more points from more recent rooms added? I've heard that but I was unsure of it
Only if you get blood points - you solve the questions in new rooms before everyone else 🙂
thank you!
Gave +1 Rep to @ember osprey (current: #1 - 4659)
Hello. When i do boxes/machines, i always run a ping on the side(sometimes not)
i always get disconnected from the box and i have to either restart the VPN connection/get a new machine to proceed. what fix would be good for this problem
Is the only for ONE person or everyone who gets it done the first 24hrs or ?? Just curious to know how that works since its a bit random who happens to be online when a new thing gets posted - or is there a schedule when new stuff gets posted?
only the first one
do you ever sleep? (asked by a concerned member) I applied to be a beginner mod to help you out. I may be still too new but I figured I'd at least offer. I am only at MAGE now but I do have some other CS background that sometimes comes in handy but I still feel like a total idiot some days too. It keeps me from getting too high on my horse. 😆
Yeah , I do 🤣 , everybody does - I hope
hi guys, anyone know when the next cloud discount will be? i was planning on buying it but i got too caught up with my current coursse 😦
pls help
Provide screenshots
Follow THM socials maybe something will be announced soon 🙂
Gave +1 Rep to @austere horizon (current: #84 - 93)
Hello @ember osprey am still experiencing this issue. Could there be a problem ? What alternative can I use to accomplish this task ?
seems like that machine isn't up yet , refresh that page from time to time - I mean the target page not THM website
I have been doing this but still no positive results
This is heavy machine it may even take 30min until it is up
Hi, my name is Patrick and I am passionate about cyber security. I am currently looking for my first opportunities to gain experience as a web pentester. I have a solid theoretical and practical foundation behind me - I'm learning on my own, completing labs on TryHackMe and learning about tools like Burp Suite, Nmap or OWASP Zap.
I'm willing to work unpaid or on an internship basis - I'm keen to implement in real projects, learn and build a practical portfolio. If you have a place in the team or can recommend someone who is looking for a committed person for simple pentesting tasks - I'd be happy to apply!
Hi Patrick , welcome 🙂
You can take a look at our #jobs-board
Hey, #cyber-and-careers #jobs-board are the right channels for you. I see you already have your message there too. But outside of these channels I don't think you're going to find recruiters here.
Try recruitment websites.
Thank you
It is possible to create a room using the new vulnerability CVE-2025-32433?
You can suggest it in #room-ideas channel 🙂
Sorry
No need to be sorry 🙂
any progress?
2025-04-23 15:25:21 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
2025-04-23 15:25:21 VERIFY EKU OK
2025-04-23 15:25:21 VERIFY OK: depth=0, CN=server
2025-04-23 15:26:21 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
2025-04-23 15:26:21 TLS Error: TLS handshake failed
2025-04-23 15:26:21 SIGUSR1[soft,tls-error] received, process restarting
2025-04-23 15:26:21 Restart pause, 1 second(s)
Hello guys. Someone know how fix this ?
Network connection is stable
delete old vpn file , change vpn server , wait 10min and download a new file 🙂
Thanks I will try it
Gave +1 Rep to @ember osprey (current: #1 - 4665)
Log from script: “[+] Confirming connectivity
[-] MTU value failed at 1000, aborting MTU check
[-] Something went wrong — please ask for further assistance in the TryhackMe Discord server”
Where are you from if i may ask ?
RU
Russia
I haven't had any connection issues for about a week
That may be a problem , 🇷🇺 blocks some vpn connections . Users already reported problems from ru 😦
Try the process again with different vpn servers see if any will work
I feel like I live in China 🤦
Ok, thanks KGB
AttackBox may be your only option if none of the VPN servers still work for 🇷🇺
I have just realised that the machine is misconfigured. There's no Web server running on it. It's only ssh. Is there a way this issue can be resolved @ember osprey ?
Which room is that again ?
IR Playbooks
I've forwarded message to staff , I will give you an update once they respond
Noted with thanks
Gave +1 Rep to @ember osprey (current: #1 - 4668)
Its just that the ping suddenly stops and it doesnt resume. So i have to reset the machine/restart OPENVPN. and this happens a lot during challenges too
That doesn't seem like an issue on THM side
hi team, having issues connecting to the VPN. tried the troubleshooting script and it suggested that I ask in the forum. could someone help please. Thanks
Which country and server?
EU-server1
Try number 3.
ok, trying now, thats the only server I didnt try 🙂
Good day Everyone. I am currently stuck in my course of learning (WHOIS) on the Networking tools segment of my study. I was asked to carry a research on what the name of the golf course that is near the registrant address for microsoft.com is?...
And after multiple researches, I found Willows Golf Course but it doesn't seem to be correct in the answer box provided by tryhackme.
Please I need help on this so I can move on with my learning
I am afraid still the same result
I am trying from the UK
I have now tried all EU-Regular 1 to 4
Can you send me your config please in DM's?
thank you @weary spindle
Gave +1 Rep to @weary spindle (current: #2 - 3669)
+1Rep
It was reported to the room creator this morning ( depends on the time zone ) , it should be fixed soon 🙂
sorry guys, me again. VPN issue resolved, got an IP, then now having issues with connecting to the lab on the Wreath room
This writeup in the room: https://tryhackme.com/room/tomghost leads to the room itself - it's linked to the room, not a writeup.
You can report it in #1333993673381253162 channel 🙂
Thanks. 🙂
Hi! Anybody know when the MS introduction: Just looking room back in defending azure paid path 👍? I only see the pentester assesement
Private rooms made by users are only accessible to premium subscribers only , is it a bug or feature
Hey has anyone completed the Snort Challenge - Basic room??
Ive got an issue with the room
when I try to input the correct answer It doesn't accept it
I tried to reset and leave the room but nothing works so far
This is probably categorized under #room-help if the input isn't bugged
What task and what is your answer?
its task 2 question 1 and answer is 328
i look for writeups and im certain this is the correct one
What is the room called?
How did you find the answer 328?
alert tcp any 80 <> any any (msg:"TCP port 80";sid:1000001;rev:1;)
used this to scan the pcap
alert tcp any any <> any 80 (msg:"TCP port 80";sid:1000002;rev:1;)
and this ☝️
runs without an error
I'm rooting on this. Thank you for the update
Gave +1 Rep to @ember osprey (current: #1 - 4671)
Recheck what the question is asking you.
and move to #room-help if you need more help!
thx let's see
This is now fixed guys. The room is now reset and its working
why is attackbox really really slow? like its taking 8-9 sec to add one letter on terminal very frustrating
Try to terminate it and start a new instance
did twice :/
i searched and so many are fealing the attackbox have gotten slower.
like a simple task is taking 3x times just because it wouldn't type or open firefox or do anything.
@ember osprey
That also may be because of your Internet connection
its fiber. this wasn't an issue before last 4-5 days
Try connect with your machine via VPN
Hi everyone, I'm a beginner on tryhackme and I can't seem to resolve my issue with Openvpn and ssh.
I tried to connect to 10.10.10.10 and it worked,
I tried to ping the ip and it worked,
but when i type ssh tryhackme@ip and put the password "tryhackme" it says permission denied, can anyone help me ?
Wait, what I'm confused, do you want to setup an openvpn connection?
Sorry if that wasn't clear, I'm trying to access the machine with an openvpn connection yes
What room are you doing?
hydra
connecting to the machine I would say 😄
You don't have to connect to any machines in this task though?
Did you use an attackbox or do you want to use a VM?
Do you have it installed on your machine?
Yes, I got a kali on virtualbox
Okay, then navigate to the THM web page => click on your profile => access and choose the right VPN server, then generate it and download it to your kali VM
After that's done you can use the command sudo openvpn yourname.ovpn to start the openvpn connection.
If you don't have openvpn installed it will tell you the command for installation.
openvpn is setup and the configfile works (I had to change ciphers to data ciphers or something like this)
I got "Inititialization completed" around the end of the open vpn prompt
If your openvpn command ran with no errors then keep the terminal open and you can minimize it.
after that you are able to use they commands related to hydra with the IP you are given at the top of the room when you've started the machine
So i don't need ssh command ? 😮
like how am I connected after the openvpn thing to the machine ?
Through the openvpn
(sorry if I sound rude, english is not my first language btw)
It's all good, don't worry!
The openvpn acts as like a bridge between your VM and the machine you started with your account logged in THM.
oh alright thanks a lot ! If I may ask what's the difference with ssh connection ?
If you want to use the command ssh user@ip then you need the password and username. If you connect with ssh then you have direct access to the CLI of the IP you connected to, therefore you have access to browse the directories etc.. depending on the permissions that user has.
I'm also only a year into this stuff, so sorry, if some of my explanations don't make that much sense 😄
Thanks a lot for your explanations !
The new streak start at midnight right 12:00 ?
but the events after midnight is counted with the day before
Is there a room to make suggestions and improvements on the course?
Officially yes but its not always perfect. The say you should avoid 10pm-midnight & midnight o 2 am.
which course? at the end of each room there is an opportunity to give feed back for that room.
I have submitted my comment, it is Windows AD task 4. I think it is poorly written
specific details are always helpful, why was exists is not working & suggestion how to improve. Try to be kind. After staring at content for a long time what is obvious to new eyes becomes unseen. Thanks in advance.
The method of using RDP is not stated on the task, so I had to resort to ask here / search on the internet. It seems there is a gap in knowledge and expects a beginner able to deploy tools like Remmina
That sounds fair. Have had similar thoughts on other rooms & also put them in the comments at the end. They may have assumed some would be on VPN already & not need RDP.
Thanks, the task is quite frustrating and I thought I have missed a few rooms, but I am doing the rooms in the correct order
Gave +1 Rep to @wet gust (current: #1850 - 2)
please im new here
was that Active Directory Basics or Exploiting Active Directory?
Active Directory Basics, now I am stuck on the powershell command
Keep banging at it - yes I had the same reaction to Task 5. You are doing fine.
How do I resolve this?
Set-ADAccountPassword: Access is denied
This is better asked in room help. Did you try googling that message?
try adding THM after the error message in your search
Sounds like you need to restart your machines in Task 2 & then just start from T6 again.
I CAN tell you that room took me WAY longer than 30 minutes.
If you lost your target IP your other machine timed out. I suggest you terminate the attack box & start the machine in T2 over & just start again from T6 - it may be worth a 10 min break to make sure your account machines all reset first.
I am connected now, just the same denied error
very frustrated as this room broke my streak
But I thought you finished T5? How long was your streak?
It was 9, I am stuck on Task 4
Again you are asking in the wrong place. If you can't find your solution via Google or a room write up online you should be asking in room-support not site-support. Also you can alway go to some other easy room to grab you 3 answered questions for the day - they don't have to all be done in order.
Will try again tomorrow, thanks
It seems most of the people are off in room-help
Gave +1 Rep to @wet gust (current: #1405 - 3)
I am not a mod but if you email support@west chasm & ask nicely & give the dates/times & what happened they may help you out with the streak - its worth asking - its not like you were not working on the site.
i am also having the same issue did you get the fix for it?
Can you verify your account and share a screenshot of your payload and listener?
@rapid onyx
in Networking Core Protocols room ftp service not avalible to do task
How ?
can i send a screenshot somehow?
Yes but you have to verify first , follow instructions from the link below 🙂
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
done
Seems like you are not even connected to thm network
my bad, forgot connect by ovpn ty
ty
Gave +1 Rep to @ember osprey (current: #1 - 4678)
You will need to reach out directly to support on the email below , only they can help you with account issues 😦
@dim breach
Let's not post PII in here 😅
i was already using iX to look through all DB's for his pw, stop ruining the fun
Back to THM after a long time. Many machines on the attack box does not allow me to open its webpage. Instead I gotta add each of them to /etc/hosts then only it loads. Is it a known issue ?
This is for a few rooms, our team are working on a way so this is an automatic process
Hello is there any way to reduce the lag of THM's virtual machines? It seems impossible to work with a heavy lag even using the VPN
Well yeah if you want to use custom domain you have to add it to /etc/hosts 🙂 . That's not THM issue , it is a way DNS works .
Are you using the free vpn?
I think so. Maybe? It's OpenVPN. What VPN would you suggest?
Are you talking about the attackbox/split-screen machines?
Yes. I am also trying to ssh so i can use my own machine but still can't ssh through. Maybr not possible.
I meant are you a premium user?
Premium user gets another premium VPN file.
If you're on the free VPN as a free user, this happens quite often.
Premium user
Site is unusable for me. Pages don't load, half load, 2fa timed out, submitting answers doesn't work. Tried in Firefox and a fresh install of Brave.
I was having the same issue on chrome. Switched to firefox and its working for me now
Gave +1 Rep to @austere horizon (current: #82 - 100)
Then it should be fine. Try another VPN file from another server. THM offers multiple ones.
bugged out
got tooltip 4/5
now all i see is this
cant clickn can't scroll
Was able to fix it by opening Data exfiltration & receiving the last tooltip pop up
to click next
Try to leave the room and re-join
Hello,
@ember osprey This issue was resolved. The machine is now perfectly working fine 💯 Thanks alot for helping out. I appreciate it 🙏
Gave +1 Rep to @ember osprey (current: #1 - 4689)
Glad to hear it , enjoy the room 🙂 🚀
Thank you 😊
Gave +1 Rep to @ember osprey (current: #1 - 4690)
the links on module room OWASP Top 10 are not working
http://MACHINE_IP:8888
http://MACHINE_IP/evilshell.php
http://MACHINE_IP
Have you clicked on the green Start Machine button in one of the first few tasks?
Machine_IP should be replaced with an IP address after waiting for ~2 to 3 mins.
Hey guys, I have used THM and HTB before on my own VM without issues, so I am having a hard time figuring out what is causing this issue.
I’m running Kali Linux in a virtual machine on Hyper-V, connected to an Internal Virtual Switch. I’ve set up NAT and can access WAN. I downloaded the OpenVPN configuration file and it doesn't error out when it connects. When I connect, I am able to access WAN, but THM does not see I am connected AND I am not able to access internal resources.
DNS Resolution: DNS resolution fails for fakebank.thm, works for external sites.
I see a tunnel interface on my routing table
and yes, I a leaving the shell open after connecting
If you can verify your account and share a screenshot, we can better assist.
@muted hawk
If you are referring to the Access Machine found on the upper right hand portion of the page, you may ignore that one for now as it is not working as it should. Using your browser, if you go to 10.10.10.10 and see your tun0 IP, you are good to go
What would you like a screenshot of?
And, I am referring to it not showing connected here
https://tryhackme.com/access
And, for example with the first machine, being unable to access fakebank.thm
Which room are you working on? I can't recall a room requiring access to fakebank.thm? If I remember correctly? It should be a site that should pop up upon clicking View Site button, or Split Screen?
Testing vpn connection with:
https://tryhackme.com/room/offensivesecurityintro
but, again, even the /access shows I am not connected
Oh, you have to use the standalone machine?
Regardless, I feel like this will cause issues later:
It's a known issue, just ignore it.
Got it. Thank you!
If you go to http://10.10.10.10 and it shows you your tun0 IP, it means you are connected to the THM network.
Will check, thank you as well
Gave +1 Rep to @ivory spruce (current: #12 - 809)
+rep @weary spindle
Gave +1 Rep to @weary spindle (current: #2 - 3675)
http
Could of sworn I typed in http. I'm noob I guess. Thanks
Browsers sometimes default to https if you just type the IP address
Got it. Thank you
Cool
Hi guys, i'm having trouble connecting to machines. 10.10.10.10 shows me that im connected, the access page shows me i'm connected yet i still have trouble accessing
what am i doing wrong?
when you ping the machine in your vm, is it responding at all?
it's normal
connect to ovpn
and search 10.10.10.10 on google
it should prompt that u're connected
if it prompts, then u allright
I wouldn't say its normal. 😅
THM Staff is aware of it, but haven't been able to get to it I suppose due to a number of things going on at the moment.
I paused my subscription for one month, and my subscription resumed a few days ago. But when I login it keeps saying to resume subscription and I can't access my learning path 😦 what can I do?
For a sub related questions you will have to reach out to support directly on the email below 🙂
Thank you!!
that’s what i was trying to understand, if it’s something that i’m doing wrong or there is a problem in tryhackme side
If you can access http://10.10.10.10/ then everything should be fine with your vpn connection 🙂
i can do that, but when i go to the try hack me and i click on “access machine” it says im not connected like in the picture i sent earlier.
i checked if i had multiple session open and reset everything with “sudo kill all openvpn” then reconnected but nothing
I think the TryHackMe Access page might be bugged and not show that you are connected sometimes.
how can i resolve that, without clicking on access machine i can’t open anything and i’m stuck
I might have misunderstood you, what is the issue? Is it that you can't connect to OpenVPN or is it that the Access page shows that you're not connected?
i can connect i check with “curl 10.10.10.10/whoami” and i get the ip from the openvpn so everything works fine.
The problem occurs when i open the site for example the “nmap” room on the right corner next to my profile there is a red button that’s says “access machine” when i click on that it says i’m not connected
i’ll take a picture to make it more clear
right now i got acces page and it says i'm connected, i go to 10.10.10.10 and it says i'm connected, i checked with 10.10.10.10 and the webpage says i'm connected. I try to open a room i want to complete and i can't do that because of this button being red, when i click on that i get redirected to the access page where it shows i'm connected so i'm like in this loop.
What room is this
let me try to replicate real quick, and I'll get back to you..
I don't know if I've ever even clicked on that button if I'm honest
so you are connected to the network using the openvpn right?
and can connect to the network 10.10.10.10 right?
If you tried to use the nmap command on the target did it respond?
i think he hasnt started the target machine yet maybe i can be wrong
He has
yup
yes i did
@coarse river for your information I think the red "Access Machines" doesn't matter
I have it as well, and I can execute commands on the target machine
thats why i said are you able to ping the machine :))
can you please provide the output after using the following command:||
This doesn't work for every room you know.
And it won't work for the nmap room.
ohh
usually what i did on try hack me was, that i started the target machine and the screen splitted with the tryhackme virtual machine and i did everything there
You need to use the attackbox for this room, or your own VM
In your VM with the VPN running.
ip a | grep "tun"
till this moment i did everything on tryhackme or in the terminal on my mac without using a VM
this means i have to get a VM running on my mac?
No, you can keep using the attackbox, but I think you're limited to 1 hour without premium
Or one boot up.
Yes.
what VM do you reccomend to run on mac?
Eh
Depends on the chip.
M1
I used UTM on my mac and it was M1.
ok i’m gonna try with that
i'll let you guys know thanks in advance appreciete all the effort
Do you guys run Kali on VM ?
Yeah 🙂
So basically Kali on vm and then you connect vpn on that Kali is that correct ?
am i the only who cant connect to ovpn now?
Make sure you don’t have OpenVPN blocked in your country as it’s in my country
it worked before
Which. Country you from ?
like hour before xd
Aaah ok could be some other issue
Yeah, you run the openvpn on your kali VM
Seems that a few are having the same issue with their openvpn today when trying to connect.
so just need to wait?
Might try re-download my creds for openvpn to see if this solves the issue.
do you mean conf file? i did it like 3 times and nothing
The support team recommends to wait at a minimum of 5 minutes for the openvpn file to regenerate, before downloading it, also you could try switching the server to another one and see if it works.
Yes 🙂
Finally got a server to work for me by downloading a new config file.
Hey all, anyone finding room completion lagging behind a bit? When completing a room and returning to the dashboard, the room shows 0% complete of slightly more but takes quite some time to update fully
What VM is recommended to run Kali on MacBook Pro intel ?
virutalbox is always good, but I'm not sure if it works on a mac (and how it works on a mac)
Quick question to all : I did the Sql vulnerability chapter but I feel like I dont remember anything probably I need to practice allot how do you guys practice sql vulnerability?
I try to connect via VPN on Linux with openvpn. But today I can‘t connect at all.
Delete old vpn file > change vpm server > wait 5-10min > download new vpn file
That doesn’t work. Even when waiting 10 minutes: the cert section in the config file stays empty.
^
same
I’m using Linux. Trying to connect to EU-Regular-2 which is the only available VPN server currently
i installed new config file but its empty, maybe will try to wait a couple of minutes
and download again
nevermind it works now
try with regular 3 or 4
Cool. Thanks a lot. Regular 3 works.
Framework laptop with Kali as OS 🙂
If anyone in management/dev reviews I just wish to point out that the OWASP juice shop room points to "FREE burp suite courses - burp suite basics and burp suite repeater" the former of which is premium. not like it's deep but damn my eyes! the heartbreak! woe is me! 😄
if anyone heard what sounds like a car wreck it moments ago it was not but the breaking of this poor man's heart
anyone else's attackbox reaaaaallly slow right now?
Works ok for me
hmm
You can report it in #1333993673381253162 🙂
cool. thank you
@ember osprey This account @naive dust got banned and now I can’t use my token
You will need to consult with some mod/admin .
Any suggest for solve pwnable challenge with mac m1 (vm kali linux)?
Are the problems with the Unattended room VM? The Registry Explorer is now 15 minutes busy in starting process. Looks liks it hangs.
Also lots of other remarks related to the performance of this room. Perhaps good to increase the hardware resources on this VM. Now it is not usable.
i am new to cyber security i just finished the cyber security 101. and i kind of want to install a virtual machine. do i go with VMware or virutalbox?
what is that one mtu cmd for packets unable to access the labs on browser
like i have used sudo ip link set dev eth0 mtu 1200
I personally use VBox
Packets are too big and get truncated thus we use limit mtu ( max transmission unit ) to smaller value
whats should i have to set
hmmm. guess ill go wit that to just to learn and keep it awayt from my hardware for now as a beginner
give the cmd like i am unbale to aceess the lab webpage
Open up new terminal and run this command sudo ip link set dev tun0 mtu 1200
You have a guide on the link below 🙂
https://www.kali.org/docs/virtualization/install-virtualbox-guest-vm/
thx
Gave +1 Rep to @ember osprey (current: #1 - 4704)
hello
Yo.
how i know my student discount its active ?
before i pay
If you're paying monthly, you don't have it.
You have to register your account using your college e-mail address.
i have done that
and before i pay
for month
then i stop
Yeah, student discounts are only for yearly subs now. 20%.
I connected the vpn but I’m still not able to ping the target machine … I connected vpn first then started target machine is there anything I’m missing ?
I’m connect to EU vip server
I fixed it by terminating the machine and starting again with new IP … is that normal ?
update, i managed to get everything to work, i completed nmap room with kali running on a VM thanks to everyone who helped me @somber lodge @ember osprey @quiet ruin @knotty storm @weary spindle
Gave +1 Rep to @somber lodge (current: #1406 - 3)
2025-04-23 16:03:53 WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
2025-04-23 16:03:53 Note: --cipher is not set. OpenVPN versions before 2.5 defaulted to BF-CBC as fallback when cipher negotiation failed in this case. If you need this fallback please add '--data-ciphers-fallback BF-CBC' to your configuration and/or add BF-CBC to --data-ciphers.
2025-04-23 16:03:53 Note: '--allow-compression' is not set to 'no', disabling data channel offload.
2025-04-23 16:03:53 OpenVPN 2.6.14 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] [DCO]
2025-04-23 16:03:53 library versions: OpenSSL 3.4.0 22 Oct 2024, LZO 2.10
2025-04-23 16:03:53 DCO version: N/A
2025-04-23 16:03:53 TCP/UDP: Preserving recently used remote address: [AF_INET]54.193.240.194:1194
2025-04-23 16:03:53 Socket Buffers: R=[212992->212992] S=[212992->212992]
2025-04-23 16:03:53 UDPv4 link local: (not bound)
2025-04-23 16:03:53 UDPv4 link remote: [AF_INET]54.193.240.194:1194
2025-04-23 16:03:53 TLS: Initial packet from [AF_INET]54.193.240.194:1194, sid=1e0c9552 9f10954f
2025-04-23 16:03:53 VERIFY OK: depth=1, CN=ChangeMe
2025-04-23 16:03:53 VERIFY KU OK
2025-04-23 16:03:53 Validating certificate extended key usage
2025-04-23 16:03:53 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
2025-04-23 16:03:53 VERIFY EKU OK
2025-04-23 16:03:53 VERIFY OK: depth=0, CN=server
i cant connect to openvpn, someone know how to fix this?
ohh congratulations!!! 🙌
Great work, UTM works fine?
perfectly fine i followed a guide made by tech with jono on how install kali and it works wonder
yeah sometimes it happens dont worry
check this @sonic shell
there is already data-ciphers AES-256-CBC in my file
if thats the case then Delete your VPN file and change the VPN server and try with the new VPN file
i tried all the servers
may i know in which country you are from ?
Russia
I think vpns are not allowed in Russia right?
i mean, i use some of them
i think then you only have the option of using attackbox :))


Openvpn won't work in Russia.
You'll need to use the Attackbox
yeah, i guess so 😦
Anyone here from Egypt or Pakistan ?
i guys i've lot of problems using msfconsole from my kali vm to a thm machine via openvpn
meterpreter session close very often, sometime is possible to ping the machine, sometime not
some suggestion?
Are you able to ping TryHackme or even the box you are trying to do?
sometime yes sometime not
well all rooms are not pingable just a quick info
Have you tried to ping Tryhackme itself, just do 10.10.10.10 to see if you can ping that IP
i start with the exploit then the machine seems to go down, is unable to ping for some minute than is possible to ping it again
an exploit the was previously working is not working anymore..... it seems a connection problem
the machine i'm trying is pingable, is a learning path exercise
no in this moment i'm not able to ping 10.10.10.10
Might want to try and reconnect or redownload your config file for openvpn. I had to do that myself this morning as my old one just died on me.
Are you using your own VM if it is Kali you should see your Openvpn IP in the top -right corner.
Might want to try a different one. It did take me 4 attempts to find a working one for me today.
ok. so it's common?
Over my time on Tryhackme I have had to change my OpenVPN file a number of times.
strange!! cause i have been usiing same file for past 7-8 mnths 🫡
Mines does last for a number of months. But today I tried to login with old one and it would not connect. Went back and forth through the 4 EU servers and finally found one that did enable me to connect.
ok i will try to switch to other servers and see what will happens
thanks for the tip
If you are in Europe stick with those servers.

ok
My old one was just stick on the initial connecting and just going around in a circle. So just stopped it and deleted it to download a new one.
what is exactly 10.10.10.10 ip?
Just the default TryHackMe IP to show that you are connected to their network.
I think this only applies for Windows boxes. Or any boxes that you need to put in -Pn when scanning using nmap.
hello is there any egyptian can help me with conncting openvpn ? please contact me in private
Oh.. I'm afraid we can't be of help as Egypt is blocking VPN UDP packets (due to a government decision or initiative and any attempts to assist on our part would go against it).
The only recommendation we can give you is to use the Attackbox.
I used attackbox , but it delay like 10 times in 5 minutes so i need to restart many times and this is uncomfortable for me
But thank you i understand you , anyway i figured out how to make it work 😁
Problem fixed after 10 hours searching 😅
how can i link my discord with tryhackme
Follow the link above.
oh wait i got it, thanks
i need help with the john tool
my command is: john jon.hash --fomrat=NT --wordlist=/root/Desktop/wordlists/rockyou.txt
its not working
How , which error do you get ?
i am just stupid...i forgot sudo never mind my dumb question^^
now i need help
i have access to a pc i am connected with a meterpreter console...i have the flag1.txt file
how can i read what is in it
use cat command
thank you 😉
i did the blue room (https://tryhackme.com/room/blue) somebody knows a good challange where i can test my skills ?
Check this one https://tryhackme.com/room/basicpentestingjt
Guys, if have a problem connect to the website of a machine. I'm connected to the vpn successfully and also can ping the machine but the website is not reachable. How do i fix that?
Can you please verify and provide a screenshot ?
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
if fixed it to secs agow hahaha, but anyways tkx y
somebody has a challange windows vuln to get the password or so ? i just want to test my skills in windows
https://tryhackme.com/room/subdomainenumeration
Task 5 - "Sublist3r" link is not working just updating but you can find it on google/complete without it 🙂
Whats this badge
im not from uk can i change it?
?
thanks.
worked thanks.
Gave +1 Rep to @ember osprey (current: #1 - 4719)
Can someone tell me what this is 😭
I sent mesaage to staff , I am also interested 🙂
Yeah it just appeared on my profile not that im complaining I have no idea where it is from :D
Anyone else got that?
It's a badge for the people who experienced the bug on day 1 of leagues release.
cc @naive dust
The one where, after doing 2 rooms, you were sent back to bronze league instead of silver.
are there some windows challenges for beginners ?
i wanna test my skills and see what i can do in the moment 😉 important please windows ty 😉
Search Windows in the website
hey fellas, I am new to the site and here is a quick question: when u reach networking room, it offers u a video. is watchin it optional and does it summarize what I'm going to read anyways or is it important and I should watch it (it's about 20 min video and I prefer to read on my own if its what the video is about)
I think you're referring to the room walk-through? You can look at it when/if you're stuck.
Ahh
Thats cool :D
So it is exclusive
It's a rare badge, yes.
I was also affected, but did not receive it for some reason.
Any known amount of users that have it?
I don't think they disclosed the number.
❤️
Would be cool to see the amount of people that have a "Rare" badge
+rep @naive dust
Gave +1 Rep to @surreal kettle (current: #1858 - 2)
Could be added to all rare badges
That cant be accuired anymore
Where can i leave a suggestion is there a part in the disc or via the site
Guys i have a problem with the john. Im trying to bruteforce a ssh password with the private key. In the Walktrugh the password got forced in ca. 2 Min. My john is runnig for 2h now and nothing found jet. Im using the same wordlist. IDK is that normal?
provide shot please
try again
now i get this err idk, last time it worked 
Hello, since today I'm unable to connect to the VPN servers, I'm unsure why. This is the error I'm getting upon trying to connect as usual :
Which server are you using?
EU-Regular-1
Which country are you in?
France
I just tried and nothing came up from the command, I will try eu reg 4 now
EU regular 4 did work, thanks for the help ! 👍
Hi hackers,
It seems my PC is connected to tryhackme network but still on the access page status showing 'Disconnected'. Could you please explain what's wrong with my PC. My friends faced same issues.
thanks
I can access 10.10.10.10 page
I see! thank you so much, I got confused i have checked my connection everything seems fine
Welcome to the server BTW.
Scrubssss
@old robin no self promotion please.
Hi Team,
I have unsubscribed from the THM subscription, but it still shows that I am a premium user in my profile. Is this normal?
your subscription lasts until the expiration date but i dont know if the status changes
Yeah , you will remain premium until already paid period expires 🙂
I unsubscribed two months ago. I was using the monthly subscription. When I look at the subscription details, it shows the end date as June 25th, and the status is shown as Active.
When I started the attack box I got an error about “unable to mount volume.” What the hell am I doing?
Just ignore that, should work fine
Hello, i'm going through the winadbasics room, managing users in AD.
Once i logged into the rdp (i'm on the vm) and tried to modify the user password as required, but the keyboard layout in the powershell is super wonky, and the keys for numbers and special characters are either doubled or mixed between azerty and qwerty, i'm not entirely sure
Huh? That's weird. What's the keyboard on your machine? Your actual machine.
Azerty
Yeah, here's the problem.
Going through the keys from 1 to zero (without pressing shift) i get: èéùùç)è)çàà=
Yeah I know. I know both AZERTY and QWERTY.
Yeah i tried modifying the layout, but everything else outside of the powershell works fine
Try using the on-screen keyboard feature.
Where do i find those? In the vm options or are they in windows?
Would you like me to guide you real quick in #794951289951092766 ?
Sure, appreciate it!
Aight just a sec
Target IP box not loading then VM not loading- “parsing error”
Try reloading the page
is there any other port opened for the VPN than 1194 ? as it's blocked and unreachable from my ISP
No,.only 1194
Which country are you in?
Egypt
That's a government block, we can't assist with that.
Thank you
Gave +1 Rep to @weary spindle (current: #2 - 3677)
Curious about your question. Looking online it seems possible to use a vps hosting service (like DigitalOcean, Vultr, Linode, Amazon AWS) acting as relay server to tunnel your traffic through ssh(port 443) and forward it to port 1194. I've never tried it but maybe can be a int...
Thank you. First several reloads didn’t work. Then it did. 👍
Gave +1 Rep to @pale verge (current: #438 - 14)
Nothing wrong 🙂 . You can ignore that message just press x . It is something on THM side 🙂
Try to get in touch with support on the email below 🙂
Yo, think I'm getting hacked. Keep getting mad sign-in alerts even after changing my passwords and putting 2FA on everything. Already tried locking my stuff down but need some extra help to fully secure it. Anyone know what I should do next?
Step 1:
Turn on all possible security measures(even if you have to go through CMD or PowerShell NON-ADMIN)
Step 2:
Check your active(established) connections: "netstat -ano | findstr ESTABLISHED"(A error handle might appear but ignore it as its not important)
you can also do: (refreshes active connections every 20s but can be changed!)
"
while ($true) {
cls
netstat -ano | findstr ESTABLISHED
Start-Sleep -Seconds 20
}
"
If you don't know if there's a random IP address and they all seem normal but still think your getting hacked; then go to step 4 but don't skip 3.
Step 3:
Try looking for folders that were recently written to. (recommend asking copilot/chatGPT to make a custom script or the proper command)
Step 4:
IP lookup (MaxMind and ARIN)
If you don't know these IP's then you can google them, which usually show there service, or you a ip lookup website.
Step 5:
if nothing has really helped that much then disconnect your machine from the internet and do a further analysis.
Extra:
make sure to clear all cookies as they are stored locally (Cookie's contain, session data, tracking data, and user settings)
if you use google/chrome/Firefox/Microsoft-edge(Bing) then i recommend switching to opera or opera GX(I do not completely know if opera one is still supported as of 4/26/25)
i can also give clarification on any of it!
This isn't the relevant channel, please use #general
🧔🏿♀️👍
hello guys! i dont know if this is the right place to ask, but im doing the adenumeration network and the connectivity and response times are so awful. I did all steps to configure DNS and works properly, changed my openvpn config a couple times and still bad. the resets are 4/5, can someon go in and click for reset, maybe this will fix the problems though i doubt it...so dissappointed really wanted to do it, but I can't just wait 10 mins for a site to load once and then 10 mins again...
I am here
have you tried regenerating your vpn yet?
yes, couple of times
oh i was talking to kareem lol
on the tryhackme website, access section, it appears that im connected to the network, also on my kali vm it appears im connected via vpn and can ping the machines(there are times when they dont respond to ping), but what is related to rdp, ssh or http its unusable
but um as for your issue. the response times are pretty rough for me too
ohh okk :))
Yes l do
at least I know it's not a problem from my part
no your good. the servers are just a lil slow due to high traffic i imagine
what error is it showing when connecting
It tells me to use a different encryption and disable compression etc.
i dont want to be too salty, but they were slow a couple months before when i tried them, maybe if someone that works there sees this, considers taking a look at them... maybe... :))
Same problems some days ago with the metasploit module. Unable to mantain a stable connection to have a meterpreter session. You have to try different vpn configuration file and find the better one. For me it was vpn_eu_vip_2
can you send me a screenshot so i can see what its yapping about
lol
Vpn_eu_4, vpn_vip_eu_1 and Vpn_west_us didn't work well for me
Ok. I'm not near the laptop right now. When I get home, I'll get back to you.
okay.
No, not all of them. I tried two or three, I think.
I suggest you to try the others too. At the end i solved this way
I will try this
Try to ping 10.10.10.10 after connected to vpn server and see if it works well. It is the main tryhackme vpn ip address. You should ping it without significant delay if the vpn server chosen has a stable connection
hello, i am a new member i just joined premium and it keeps asking me to verify my email but when i click on the link in my email it directs me to a 404 not found page. Is it ok to ignore the verification?
hmm do you have premium on you image in your profile?
just to make sure you have premium in case an error occurred
yes i am definitely premium because i was doing the pre security pathway and the lan room needed premium so i subscribed and joined the room
ahh, ok
i requested the verification link multiple times since yesterday but it still is directing me to the 404 page
so what email sends you to a 404 page
ohhh, a verification link
I think KGB will have a better answer 🙂
he will probably help you soon
Try to get in touch with support on the email below
ok i will email them thanks'
is there a chance to download the kali box to run it local ?
No, THm don't provide their images.
You can download your own kali though.
Attackbox = Ubuntu.
i already have one, but i wanted the same like on thm ^^ but thy for your info
👍
i wanna use tryhackme also on my ipad, which browser is the best for it ?
for what are the infos on social media ? who can see it? for what is the business mail?
Which business email 🙂 ?
Social media shows on your public profile if you add them. For the business mail, I'm not sure why they ask for it. I never got an answer when I asked the staff.
Any socials linked can be seen on your profile, business information can't
^
cant see myself on monthly leaderboard, it says I'm 24??
well what is C2 attack
i thinks its used for as creating backdoor right ?
well web pentesting used to find vuln on web and exploit it , but what about cryptography ?
as soon i'll complete all labs on portswigger then i'll move to cryptography
but the question on why i learn cryptography?, to exploit machine or web ?
That's probably because many of you have the same number of points
Hello
I've stuck at linux Funamentals Part 2 , when i'm trying to use the password from lesson "tryhackme" , it always get permission denied
Can you please verify and provide a screenshot 🙂 ?
https://help.tryhackme.com/en/articles/6495858-discord-how-do-i-verify-my-tryhackme-account
All about TryHackMe Discord Server.
Press green Start Machine button in the task
Hello! i have problems with subscription, i paid like 19hours ago and have status:active in profile, but its still "Resume Subscription" on main page and i cant use subs rooms
For sub problems reach out to support directly on the email below 🙂
Hi I want to report that the room "Walking An Application" in the last question has the wrong FLAG.
It's not wrong, you just have the wrong flag.
Hello, I don't understand why my kali DNS doesn't work, any suggestions?
Every room I try to work with the edit of the DNS config, it broke my VM
wum ?
add the ip address to hosts file "sudo nano /etc/hosts" , and when browsing, make sure u use http instead of https
inside the hosts file, u put this:
IP hostname
example:
10.10.10.10 roomname.thm
i.e.: with the exploitingad room, when I edit the DNS of the machine, It dosen't work
what room is this?
Every room about Active Directory
I was doing before the: Exploiting Active Directory
i think i didnt do this one yet
Litteraly every time I need to do those things
can u show me the erros u get?
idk what is u suppose to do but 1.1.1.1 is not google dns, and idk what is other ip u add
This is the room and the problem isn't fixed with the other Google DNS, like: 8.8.8.8 or 8.8.4.4
Wow, it works thank you so much 🙏🏻
Gave +1 Rep to @arctic agate (current: #1860 - 2)
Hey my buddy is having an issue verifying his email and every time he clicks the link provided in the email he gets redirected to a 404 nothing found. Anyone experience this before?
Try to reach out directly to support on the email below
Not a big deal but the league still ahs some bugs. I was to be demoted to silver because of my low ranking. After the reset it did in fact say to complete two rooms to join the silver league, as expected. But when I completed the two rooms I was back in gold. Just a headsup
🔇 Muted tradewith_hughes for 1 day
I'm getting 'Instance termination' a lot (on the Moebius room, in my case). It's making any pentesting very difficult.
Try to terminate that instance > refresh the page and start a new one
Will do, thank you @ember osprey !
Gave +1 Rep to @ember osprey (current: #1 - 4737)
Is there any badge you get for winning all the leagues in a row or no?
Worried i lost some badge since i skipped out on a week :D
I don't think there is such a badge 🙂
I think there is only a badge for getting 1st place in a league
@ember osprey Unfortunately, it's still doing it. Do termination happen more often on more popular rooms? (Is it related to the fact there aren't enough machines? Might just be my ignorance on how THM works)
does it happen while you are using the machine?
It does @tough aurora Granted, it depends what you mean by 'using'. I might not be actively requesting it at the time but it will terminate while I'm building an SQLi payload, for example.
hmm, that might be the reason. Because aren't really doing anything to the machine, it might just terminate because a lot of people need servers at this time
you can try SQL map when doing SQLi to avoid termination
I see, so sort of a mixture of the room being popular and inactivity.
Problem is, the premise of this sort of room manual SQLi is required.
ahh, ok
It's all good! I shall fight to the end (when I get the bloody flag)
good luck!
thank you for your help either way! @tough aurora
Gave +1 Rep to @tough aurora (current: #550 - 11)
Are the first place badge for the gold league a bit slow this time around? Haven't received mine yet 🙂
hmm, odd, something also happened to me recently when I didn't really recieve my 1st place badge in the Silver League (still have not recieved it)
if it doesn't appear, you probably should email tryhackme
Yeah, didn't want to bother the support if it's just a matter of "wait a day or so" 😄
But i might do that, the other badges were instantaneous.
I haven't received it as well. If you get it, do let me know as well.
@ember osprey I have not received my gold league first place badge. Could you please let us know by when we can expect to view our badge for gold league.
You will need to contact support on the email below for that
ok, thank you.
Gave +1 Rep to @ember osprey (current: #1 - 4740)
Stop pasting this in every channel please. I'm already trying to help you.
Hi there.In room CI/CD and Build Security task 6 doesnt accept the flag and it keeps saying that the answer is incorrect even though im sure it is!?
Im sure there’s an issue with the submission form because ive check my flag answer with other players and they match.
Ahhhh
I should still be in gold league
Im pretty sure
I didn't finish in the promotion zone
Can i be put back into Gold league?
Thats where im supposed to be
I want the #1 badge but couldnt participate and for some reason im in sapphire
Submitted a ticket about this
anyone experiencing overwhelmingly slow nmap scans on challenges rooms?
tried two rooms already. Yes I have set up vpn connection directly.
oh wait a minute, might causing the Spain Portugal grid issue>?
https://tryhackme.com/room/owasptop10
I can't access the task 7's machine, anyone experience the same as me? It did generate a url, but it doesn't work
https://tryhackme.com/games/koth/122150 no Ip visible for this game
Ctrl and F5?
@regal crown hi, can you dm me?
not working
Can you please stop pinging members and ask them to DM you, this looks like spam behaviour and you may be muted]
Probably bug then.
заебал бля
can you at least tell me the ip then
No, because I'm not staff.
English only please, and don't be rude.
so how should I get a help now
I'd ask you email support, but by the time they respond, the game will be finished.
Probably just need to abandon it.
ok then
Everytime i open the attack box and then the burpsuite i have that :
I know how to do that but it's annoying to have that message everytime. Any idea to help ?
Create a new user, login, run burp.
Or do what the steps say.
The Attackbox has no perstiance.
Yeah but why i have that everytime the attack box start ? It's a bit annoying no ?

Because of the reason I just said.
So I was dropped from gold, down to silver where I was supposed to be but I lost my 360 points in the process
Yeah Yeah but it’s annoying 🥲 but thanks for the help
Gave +1 Rep to @weary spindle (current: #2 - 3681)
Now that is what you call a quick promotion today from the saphire league to the Diamond league.
Just came to post the same thing. I was Sapphire an hour ago, just got back on and it says Diamond.
Hey all, could someone please reset the holo network?
I'm stuck in the same place as Tyler Ramsbey on youtube, nothing will write into the HTTP directory within /var/www of the server.
Join me and let's hack stuff together!
Skip to the end if you want to look.
My Sapphire room points have reset and sent me back to needing to complete 2 rooms, which i have have done again but its not starting to count points not sure what has gone wrong?
I was in the Sapphire room this morning and ended up in the Diamond room this afternoon. I did another 2 rooms and it is not showing. Just have to wait again to see what the staff do to fix this.
As far as I know, I was second place bronze 😂 👍
Didn’t know there were badges. Cool.
Kinda noob or whatever
Yeah mine is not showing. Not like I know what I’m looking for but it’s def looking like a pending situation. Good thing 2nd place bronze is not highly coveted. Eh? 😉
I just finished my second room that got me to participate in the weekly league, but only the point from the second room are being taken into account.
This morning I was in Sapphire League. When I logged in tonight it show me in Diamond Leagure but the league is not unlocking.
Right there with you!
Oh hey that's me.
Hey all, someones trolling the holo tryhackme room to the point where its literally undoable
I got a little bit further this time after resetting the network and jumping in immidiately, but i couldnt run linpeas as i think theyre just sitting with something running which just revokes all write privileges from every user before anyone can get admin
But its definitely a troll because last time i did this, it wasnt working and it magically worked this time but now im getting permission denied again because someones sitting running scripts on the other end
Its really frustrating me ive been doing this room for a couple days now :/
Can you provide some screenshots ?
ngl ive just rage quitted the whole thing
ill hop back on it real quick
tyler ramsbey (i dont know if youre familiar) ran into the exact same problem
on youtube
right at the end of his video
he just gave up doing the room because of it
@ember osprey
and then ill just check all the read write directories for you rq
Ok thats completely on me
My fault
However there is definitely someone trolling, had to reset the network earlier because of it
ill let u know if they come back but thank you for now
rookie error
Hey! Congrats for making it to moderator!
same here
I have an unrelated question that I don't know where to ask. Is there a way I can reclaim a TryHackMe username that's already in use? The user who has it has been inactuve for a long time and didn't even finished a room.
Thanks 🙂
Gave +1 Rep to @wispy sable (current: #2847 - 1)
Try to ask support on the email below
Thanks
Gave +1 Rep to @ember osprey (current: #1 - 4745)