#site-support
1 messages · Page 6 of 1
Vulnversity
it expired now !
If your account got "wrongfully" banned by discord, reach out to discord support, we can't allow discord platform ban evading in here.
-ban 1017405622720942149 Evading discord platform ban, please reach out to discord support if you think it was a wrongful ban. Still, appeal are bans@tryhackme.com
🔨 Banned Falko#3903 indefinitely
Thanks for assistance !
Gave +1 Rep to @gray loom
Hey there, you banned my previous account. I think I made a mistake. My discord account did not get BANNED but DISABLED which is largely different and I am allowed to make a new account. Could you possibly unban me in that case as I am not "evading discord platform ban"
"Hello,
Discord is focused on maintaining a safe and secure environment for our community. We've found your account to be in violation of our Terms of Service or Community Guidelines. As a result, we've disabled your account for the following reason:"
This is a discord platform ban. Every time you join here and try this, you make your chances of appeal less and less.
Good bye.
-ban @naive dust Evading discord platform ban
🔨 Banned FixMePlease#5562 indefinitely
Anyone ??
Navigate to the Loki directory and try again.
how long would it take to sort out our queries?
Everything shows I should be connect. But pings won't go thru. no connection. Help pls.
What's the reply you get by running curl 10.10.10.10/whoami ?
Nothing. It is just hanging.
Show a screen of ip a s pls
As well as of your openvpn output when connecting to the VPN
Seems you now have more than tun0
sudo killall openvpn
Then connect to the vpn again
Thanks for the help. It didn't fix it. I have to go to work, But now I have a place to look and google later. Thanks again.
Ye, it wasn't meant to fix it, since previously you had only tun0, but to go forward on troubleshooting we had to get rid of that new issue of having multi vpn 🙂
Hello ladies and gentlemen
Could someone from the tech support give me a hand, please ?
The issue i have:
When i go to subscribe in THM, the page for payment does not load, it is a pop-up made with chargebee.
I tried subscribing on an iPad, an iPhone, an android, a windows 10, windows 11, ubuntu, Kali, parrot, and an Xbox, all of the devices up to date on all updates and patches, i tried using different browsers in all systems* (chrome, edge, Firefox, safari **) , with these all up to date.
And i tried also connected to 3 different ISPs.
But i still cannot connect.
Note:
* these systems are excluding the Xbox due to applications limitations, in this particular case i used the default browser
** safari only used in apple systems
- connections to different ISPs also had different network environments, but in none have been packages dropped due to firewalls.
- also all systems have AV solutions but no incidents have been logged in any connection on any of the systems
Could you give me some help ?
I swear someone said something about this before. Cant find it. But Ive been having this issue with ovpn lately
TLS keys out of sync, cipher issue potentially
hey guys
when im using gobuster
it's returning an error
Error: unknown shorthand flag: 'u' in -u
whenever i use the -u switch
for the url
what version of gobuster are you using???
thanks tho u helped cz i didn't realize i was using v3.1.0
no problem
Hi I have emailed the support for a username change on Monday with no response until today.. do they usually take more time?
They are flooded with mails because of the current event, so ye, it could take longer this time
I don't believe emailing them once again is a good idea right?
Nope, that's just putting you at the end of the queue again
Yup we don't want that, thank you 😄
Question to see if anyone else has had this problem - When I'm connected to a network VPN and the network timer dies, after the network starts I can't reach any of the machines on the network even though the VPN is still connected. I have tried restarting VPN, regenerating and redownloading, flushing cache and nothing helps. The only thing that seems to fix it is time, usually takes over night. Any ideas?
Anyone experiencing "Max machines reached for this lab" for launching a new machine?
now i'm getting this
i really wanna finish this room
i'll probably install shit localy to see how it'll go
python3????
An error occurred while installing eventmachine (1.2.7), how to fix?
Trying to install Beef on mac.
Ruby installation
I cant seem to connect to any servers on the attack box
please check the pinned messages, perhaps there is something there to resolve your problem
starting to think the hardest part about this service it getting stuff to work
it shouldn't be very hard if you are using the attack box
can you describe what you did and where things seem to go wrong?
not doing anything
stuck at that
try to open an IP in the web browser not connecting. Ive reset serveral times
i working on Empire when everything broke days ago made 0 progress
I have a habit of breaking things but i feel the throwback should be set up in a way that reseting it should fixed any changed i made
i went as far as putting the file on the computer and never could get any feeback on the other side
i can access normal web pages just cant connect to the servers
I switch to Kali and i have the same issue
I have been using the in-browser attack box and have completed pre-security path and part of jr penetration tester path. Tonight I decided to use the openvpn on my virtual machine. I connected to the openvpn and verified it through the provided website. But anytime I run a command in my terminal I get an error saying the file or directory doesn’t exist. I’m currently on authentication bypass task 2 and I’m not sure how to fix this. Any help is appreciated.
anyone from staff?
Cant access Throwback either?
2 days already but still no access to throwback
did you try attack box?
i cant ping any of the servers
when i try to access the vpn the file downloads blank
yes I tried but getting the issue from their side
No im trying to see if you cant ping any the servers either
will they extend the subsc?
5 day
I try to ask other places including reddit and they yell at me to go to this channel /cry
I've got a streak of 8 days, and it says that I need 7 for access to networks. However, I still have no access to networks. What's the problem?
Are you looking in the correct place?
At the bottom of learn?
Have you joined the rooms?
If you go to Wreath, does it look like this?
You will only have network VPN scripts in your access list if you've joined a network room.
Hi need help with payment for premium, it not accepting credit card
👍
Hello, my account country its wrong , its possible to fix ?
https://tryhackme.com/api/user/update-timezone
Click on this link with your VPN turned off.
It will take you to your dashboard.
Its solved great Thanks !
So I am on Attack Kerberos When I get the hashes for both httpservice and SQLservice that are all wacked out with spaces due to running the duel machine in one window. any fix for this?
Has anyone been having issues with the AD rooms on the Red Teaming path where you set the resolved.conf file up and nslookup works once then immediately stops work and you lose connection to the network? I am on the Breaching AD room, and previously had tried on the Lateral Movement and Pivoting room, with the same problem. It is driving me insane. -- edit: I am using the Attack Box at the moment
hi anyone knows if im going to use vpn on windows it will change also ip for wsl2 cause some people say that it wont but in shit like whatsmyaddress sites i see vpn ip
Are you talking about the THM vpn ?
im using proton vpn on windows
Okay, well then it's not related to THM, therefore use #infosec-general for such questions pls
hey, why i can't be connect on the vnc server of my machine ? (tryhackme)
How long does it take for a response from support? Account was banned and would like to know why and get it unbanned.
About four days ago
I see, I'm sure it won't be much longer, however I can't speak for support.
Hopefully, I was working on the new path but I think I read every prize has been claimed
They have.
Well then now I am not to concerned on time. Just want my account back.
Good luck,
Thanks
Could any verfiy the throwback networking is broken or not i cant get in contact with any servers
There several other people also cant get access
is there any staff around just want to ask something about THM for business
You'll need to email.
@celest wadi @gray loom looked through old messages to see how to run kerbrute as kerbrute rather than the entire thing. Saw moving it to the bin, and then using good practice, put it under the /local/bin. Thank you to both of you!
Gave +1 Rep to @celest wadi
ey robo give a +1 to lassi as well
Gave +1 Rep to @gray loom
Gave +1 Rep to @weary spindle
Can not generate a report from Acunetix. Last 5days it says processing. How to solve it?
I have to do an assignment with Wireshark, it won’t let me ping a known IP on my network or google, yahoo or Cisco, I have to input the IP addresses and MAC addresses of those websites as well but can’t. I think it’s due to my firewall but I don’t quite understand the dangers of doing so. Not to mention I don’t even think I can find a websites IPv4 or MAC address even if I did ping it.
Is this for THM?
hye
how can i solve when the site displayed "this site cant be reached"..this happen when i want to access any challenges tht redirect to ip machine
Which room, which task, what's the url you are trying to access, are you on your own machine or the attackbox ?
for example ..local file inclusion
when i want to complete task8 tht rquiring me to visit the site tht includes my ip
and this hppen
Are you connected to the thm vpn, since you are not using the attackbox ?
nope..
Well, then that's your issue 😄
hahahaha ok thanks
Gave +1 Rep to @crystal marlin
Might want to move that question to #lateral-movement-and-pivoting since that's the dedicated channel for it
thanks
Gave +1 Rep to @crystal marlin
Room reset help -> Exploiting Active Directory Network Reset
Good idea to use the #exploiting-ad channel and stating your subnet.
i completed my red team certification before 21 september . but i did not get any valuable prize .
hello support team please help me with very hope i completed my certification of red team before 21 september but i didn't get any valuable prize which can i show on my linkedin profile
...are you trying to get support to give you a prize that you didn't win?
For some reason I cannot load https://www.tryhackme.com/room/blue. I can get to the page while logged out, but not while logged in. I can also get to other rooms while logged in (i.e. room/basicpentestingjt, room/overpass, room/blueprint. Any other room I try to load works). I have tried logging out and logging back in, connecting via a VM, and connecting using another computer. All cases just get stuck with the spinning load screen forever. I have cleared my cache and tried other browsers as well.
Strangely enough, after continuing to mess with it for the last 40 minutes or so, the page finally loads.
I would like to change my country (didn't notice it was wrong all the time), but whenever I change the phone number to other country it reverts back to US
Good evening im currentely working on Attacking Kerbrute lab and when i enumereate with Kerbrute i keep getting nothing back
am i doing something wrong?
did you update your /etc/hosts? Not sure as I haven't done that lab yet and maybe someone will have a different answer. But looking at what my results look like from doing Attackative with kerbrute, that may help?
This is weird, I'm answering questions but it's not showing any activity for today's date, in my yearly activity area. I wondered if I was the only one but I emailed support anyhow to give a heads up.
How long does it normally take for a reply from support?
its been almost 5 days now sense i cant get throwback to work
Hi, are nmap scans for all ports supposed to take very long? After about 8 minutes I've had no response, is that normal?
network services
I had it with the telnet box too but now I'm on FTP
Got the answer though by guessing +1 lol, thanks
Not sure this is the place, however is their a place were our community can use your service to recruit devs from after a competency test of some sorts?
Hello,
I can't RDP onto the windows machine on Task 4 of the room MAL:Strings. I have tried using both xfreerdp and rdesktop, as well as deleting the host in xfreerdp known_hosts file. Please could someone help me out because I've been stuck trying to connect to the machine for over 30 minutes now lol.
I will attach the error message I get with rdesktop
@steady mirage try switching regions in tryhack me and then regenerating your openVPN profile
quickest way to find out if the issue is on your machine or with your ISP / something between you and THM
Ive switched regions and am currently using the VIP region nearest me, but even then, it can take like 10 mins just to ssh into a box
kali
haha yeah ive tried to troubleshoot but nothing seems to work
is this a relatively fresh install?
Is it a virtual machine ?
bare metal
If you check ip a s do you only see a tun0 or any extra like tun1, tun2 etc ?
i have a tun0 and a tun1. I assumed it was because I had attempted it with a few different openvpn configs
Ye, make sure to always disconnect properly, using ctrl + c in the terminal your vpn is running.
So run sudo killall openvpn
Then connect to the vpn again, wait a minute and check if there is only tun0 now
in reality, the VPN connections should be quite fast right? No one else has issues with using them?
Copy that. I will give it a go when im back at my machine. Thank you!!!
Gave +1 Rep to @crystal marlin
Hey, is it ok that machine loads like this? I waited about 10 minutes so it properly starts, and I restarted machine about 2 times
https://tryhackme.com/room/webenumerationv2 ; wpscan section
i had this happen to me once too, i think its just wordpress getting wonky. Try a hard refresh (ctrl+shift+r)
I guess you have to add that domain to your hosts file
ok..but i copied from here
the website
i was able to log in earlier but after i restarted the machine, i cldn't log in anymore
yes
right now , i'm trying out on THM browser attack machine
ok it works on the browser attack machine now....it was working on vpn too until i rebooted my own vm
now i'm almost done w BOF
and i got this error
can help me fix
i can't even extend another hr
when i clicked on extend another hr
i got the error msges below
Use Ctrl and F5 though.
i was asked to restart the machine
:emotionaldmg:
which means i need to restart my tasks all over again????
😦
u spend over 2hr already?
almost
I did
I'll try as soon as possible, thanks
Gave +1 Rep to @steady mirage
Hi I wanted to use the attack box but it keeps saying I have more than 3 machines active but on my side I have none active. Is there a way to find those active machines and terminate them?
the time over but the browser didn't show that..
just reload the page
don't trust the browser timer...
Check the pinned messages in this channel ☺️
Thanks!
Try a refresh? Possibly with a CTRL-F5
Can someone please explain to me if THM resets a user's streak after 530+ continuous days or the site encountered a glitch of some sort today, I have my yearly activity tab showing that I haven't missed a singe day and yet the streak has reset, lease advise and apologies if this question has already bee answered but this is something to be looked into
If you contact support they can reset it, not sure what will have happened here
would they reset my discord verify if I contacted?....
If your token is linked to an old discord account then that's best to find a mod when they're online and ask them to unlink the old account.
Support can probably do it too, but easier to just ask a mod nicely ☺️
yeah actually that's what happened...
thanks I will contact the mods
Gave +1 Rep to @deep spire
Is it normal to get a support reply with a failed DMARC?
Hello, Anyone knows any ongoing issue with chargebee ?
If I change my operating system to Linux would I still be able to do alot of things apart from gaming. I'm trying to force habbits to learn Linux
Linux Mint is supposed to be getting better for games.
Still the same thing :^(
Are you using https ?
Except for Office, Adobe and some multiplayer games, basically everything works
Thank you so it make sense to do it then.
Gave +1 Rep to @scenic willow
Have fun!
if you play a lot of none steam games be prepared for a decent bit of tinkering to get them to work if they even can work on linux
Day 6 of no support response. Anybody have any contact with support recently?
Support will be overwhelmed with the event.
Especially as it's getting close to the end of the event.
I'm trying get away from gaming if I tried as hard as I did with cyber sec like I do with gaming wow. I'm an addict for games.
tryhackme start machine doesn't work. Please see the image link https://ibb.co/N3cHJdL
<a href="https://imgbb.com/"><img src="https://i.ibb.co/7zs6ZdG/Capture.png" alt="Capture" border="0"></a>
so many broken start machine link, please fix it
What you mean by doesn't work ?
Also, why you put your links in html tags ^^?
There wasn't a way to add the image. When I click on the start machine, it virtual session doesn't show up to the right side, even if I was 10 to an hour
Not every target machine is supposed to open within the browser
What room are you talking about ?
there are so many and I forgot the name of them. Right now, I am studying Jr Penetration Tester
Okay, well as I said, most likely the target machine is not supposed to open within the browser.
If you can't give me a room where you encounter such an issue, I can't tell you if it's expected behaviour or not
Ok, ye that machine is not supposed to open in your browser
You just navigate to the IP or URL that's given in the room
then, how do I complete the task
I tried but the page doesn't load, it says 404 or .. after loading for sometimes
@crystal marlin
So what's the URL you are using ?
https://10-10-212-253.p.thmlabs.com/ this link on the browser from attackbox
Works just fine for me.
If you are not a subscriber, you have no internet access in your attackbox, thus you need to use the IP
In your case, just 10.10.212.253
I am a subscriber @crystal marlin do you mean subscriber those who pay monthly to tryhackme?
Yes
Yes, I am subscriber @crystal marlin
Well if you are subscriber, that link should work just fine, I just tried it.
I get server error https://ibb.co/ZSYmpNF
It seems you have not even started the target machine yet
Press the green "Start Machine" button, a box like that should appear then:
I started both at the same time before. Let me try one more time
You can also try to refresh the room page with ctrl + F5, then see if you can press the "Start Machine" button
If it's really not starting it
Also, if you verify, you are able to send screenshots in here, instead of sending links to your screenshots
!docs verify
@crystal marlin still not working
You are not using the URL provided in the room
@crystal marlin thank you!!
Gave +1 Rep to @crystal marlin
Hi i get this error message when i want to connect with openvpn :TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
@crystal marlin how to switch ip to target machine?
Mh? Well just copy the IP that's displayed in the "Active Machine Information" box and paste it in the url bar
But you will get to the same site as with the URL
If you are using a VM, try to change the network settings.
Also try to regenerate your vpn config file, wait a couple of minutes before pressing download, then try with that new config.
Other than that, most likely one of these reasons apply: #site-support message
Thank you i will have a look
Gave +1 Rep to @crystal marlin
I want to change my username but i can’t do it from the site
sec
Ups, didn't mean to type here 😄
does anyone know what is the WSL equivalent command of this systemctl restart systemd-resolved?
with WSL, you should be able to use linux commands
Hello I purchased the throwback AD network and it is not showing up in my access page (network tab)
Thanks for that, I have just sent thru an email to support with this concern, hoping that I get acknowledged, I am a premium user and have sent a ticket sometime ago and no response to date either, I haven't received an auto response with a ticket number or anything, so how do I ensure that this gets attended to, since there is no ticket support via Discord , please advise and thanks heaps.
Thanks mate, I hope they do...
Gave +1 Rep to @deep spire
I'm doing the Breaching AD room and I have uncomment the DNS line and add the IP of THMDC in /etc/systemd/resolved.conf, which I did but I don't know how to restart the service in WSL.
systemctl restart systemd-resolved doesn't work by the way.
I have to use service <service> restart to restart the service but since systemmd doesn't exist in WSL, I don't know how to restart that service.
ATTN any moderators that's attending on Discord, please see my above comments re my concern for losing 530+ daily streak, I have submitted a support ticket & have chatted on Discord, however the support is pretty much non-existent, I would like an acknowledgement and a response as this is totally unacceptable from a premium user perspective, I have also noticed that according to other users here in Australia that no response to their tickets either, I intend to take this onto another platform if I don't hear back soon, I can appreciate a delay but no response multiple times is like what the..... - awaiting a response
hi need ur help
i tried every single jmp point to run the exploit.py for overflow10 but none worked
bad characters were correct
You submitted an email, be patient. You know you’re not the only query I get right?
If you are rude you won’t receive a response at all.
Hi :), i have some problem with two rooms which are in private : 'introtopython' and 'introtox8664' i wish i could find an answer here.
Not rude, just expect some courtesy reply rather, two tickets submitted date one six months ago and one yesterday and both no reply nor acknowledgement, I guess it is not a matter of patience here again some courtesy reply, please escalate this matter or at least reply to acknowledge receiving it, I manage a company and was thinking of subscribing my team to the business deal on THM but am having second thoughts after this, out of curiosity can you instead reply back with my case number for reference in the least!!
Hi, I'm preparing a CTF for my university and one of my machines is so slow that crackmapexec can't even make user & password spraying properly, neither evil-winrm connections are working, can I get any help? Thanks in advance
What linux would you use, should i go with ubuntu
I'm having still this bug btw
Hey there :)
I’m sorry you feel that way but with every company you should email once and then follow up if you don’t hear anything back after a week.
I’m one person. Just one. Just because you’re subscribed doesn’t entitle you to support :)
Furthermore, I’m not ignoring you, we’re currently running an event which means a lot of emails, this means you can expect the inbox to be pretty backed up. As stated by the automatic response, you can expect a response within 1-3 days
And finally; you haven’t emailed us, there’s no email containing your site username, your site email address, your name or even the domain from the company signed up to your account 🙂
All good mate, I just wish to resolve this issue and I know that if I don't follow up on it then it will not be of any benefit as per the previous instance 6 months ago...
For pentesting or just general use?
general
I also started on Ubuntu, it's not bad as a first distro
The wpersistence_v1.3 Windows machine cannot connect to the internet and I can't retrieve the payload from the AttackBox to continue with the 'Windows Local Persistence' room. Is anyone else experiencing this issue?
cheers man, ive got ubunutu all setup with kali on virtualbox, time to get learning
I restarted the machine a couple times now but still no connectivity
Have fun!
wget to the internal network doesn't resolve either... the Invoke-WebRequest function fails to reach the server @gray loom
one sec... I just terminated the machine and got a new one starting
well...
I wasn't here... don't tell anyone @gray loom
it turns out 10.10.101.7 is not the same as 10.10.107.7
welp
dumb fingers
is this a glitch here?
I have been working on a few different rooms and it still adds the points but it seem to have gone over without changing levels
is this something I need to open a ticket for?
You reached max lvl
I do have the [RED TEAMER] tag but I had noticed that other people had achieved [0xD] in their status... so maybe the [RED TEAMER] status overrides the level13 status
thanks @crystal marlin
Gave +1 Rep to @crystal marlin
It does, but the red team role is not permanent and will be gone after the event is over
not sure you managed to resolve this, but this article looks like it may help https://superuser.com/questions/1533291/how-do-i-change-the-dns-settings-for-wsl2
Has any one had issues with the "Internal" challenge. I get can't connect to server when trying to go to the WordPress login page (wp-login.php)
for the Holo room, that VPN connection seems to be causing nmap to segfault. I have tested nmap on several connections, even the general THM VPN and nmap works fine. That’s the only thing I can attribute nmsp crashing to, that VPN
Hello! My premium membership seems to have disappeared! (Had over 1 year added recently) I did send an email to tech support yesterday but still waiting 😦 (I need it for work)
Support will be bombarded with E-mails as it's the closing of the event, so people will ask for their stuff.
So replies will be slightly delayed.
Hi, I just did a question today and it says my streak is 3. It used to be 17.
I swear I didn't miss a day, because I did multiple questions each day.
It doesn't make sense because yesterday it said 2 but I thought it was a glitch. I never saw 2 popup when I finished a day. Dunno what happened.
Email support, they'll reset your streak back to what it was.
Keep doing rooms just now and they should just add it on.
Ok cool. I really don't think I missed a day but it's not impossible.
I do questions right after midnight, that's why I don't think I missed one. Maybe that messed it up?
I'm not sure, I think the streak goes from midnight to midnight in your timezone, but I've seen arguments on both cases that it would be midnight to midnight BST (Which is my timezone)
The former, James has states this, I think, and I'll probably take his word against others.
Too bad it doesn't say what day you broke your streak.
Because I would like to know.
Also does the UI say anywhere if you need to complete a question today?
Because sometimes I forget if I did and do another question.
Does the green flame show something different or no?
No, you don't know, and can't tell.
Not a question for that channel, since it's no a technical issue related to THM.
Beside that, I don't see how people are even able to answer such a question.
It's like saying: I lost my wallet, how is that possible?
Possible, ye 😄
Hi, I sent an email 6 days ago because of this problem, the machine is unplayable rn, can I get any help please?
Hi! I didn't make it public yet but I sent the link so they can access the room.
So what are the specs for windows machines so I can try to optimise it?
where can we contact for the streak support?
another than the email support@tryhackme.com I lost 230 its showing 230 on activity log but 1 on my dashboard!
are you sure you did it within 24 hours? If you answered a question at 4pm on the first day and then not again until 401pm the next day, your streak is going to reset even though you logged on every "day"
Just E-mail support.
Do rooms just now, when someone gets back to you, they'll just add the days on
It will be continued from 1 🔥 if i continued attempting questions, will that not affect my query?
I lost several months of premium and I contacted support three weeks ago. They emailed me requesting some information two weeks ago, which I immediately provided. I haven't received any correspondence back in two weeks now. How long should I be expecting to wait fo rthis?
I attempted it within 24 hours 🥺
No, they will add it on.
So you'll have your 230 + what you do until support reply.
do they even respond on this email?
cz I lost it for the third time and have never get a response back
Yes.
Support will be swamped with E-mails due to the Red Teamer event.
still no help
hello everyone I'm trying to learn pentesting through tryhackme but my problem is that when i deploy a machine and try to access the web page it just keeps loading and says this server is refusing connections so i am not abled to connect to the machine but i am able to access it through attackbox can someone help me with this?
You need to be on the VPN if you're not using the attackbox.
ive run the sudo --config openvpn in my terminal
is there anything else i need to do?
Does it say "initialized" ?
vm
Which room are you doing?
you there?
Yes
Can you upload a screenshot?
I was about to say.
happens a lot with me lol😂
good to know that a red teamer faces dumb issues like me lol 
Hello im working on Attacking Kerberos lab and i keep running into an issue with hashcat
this is the error im getting
This isn't the appropriate room for this-- try #room-help . Additionally, you aren't getting any errors.
Did you get an auto reply, saying about 1-3 days?
Was that a yes?
Was a No I'm curious if I used the right thing
No, just an E-mail.
I used this https://help.tryhackme.com/contact-us but I see a few now
Get in touch with TryHackMe.
Wonder if that's my issue lol
I don't know for certain, I just always E-mail.
Roger
I just know replies will be a bit later, as the event went on and that drove the support e-mails up.
Surprised there isn't a separate suport for throwback
I looked at a few of the things no surprise people are breaking the systems lol.
Is it throwback you need help with?
Yea it's not sending me vpn creditentials
The page is blank
Seems a few of us have the problem
Yeah, I think there is.
Thanks, I have the message this time.
Gave +1 Rep to @weary spindle
Do I have to install burp again in kali, when I want to update it?
Are you in your own VM?
Me yes
Start burp, it will ask to download an update, say yes and download the burpsuite community edition.
Then use
chmod +x burpstuite_file_name.sh
Then ./Burpsuite_file.sh
I did it but I had to install it. I still have the old version with the Organe Logo and the new with the green logo. I wonder if I can just update the old version.
The Halo network openvpn file size is 0 bytes when downloaded and it won't connect. I contacted support a week ago but they still did not come up with the solution. They post an update every 2-3 days and asks one question and wait another 3 days to reply. Very disappointed with the customer service.
There has been an event recently and the support very likely has been flooded with various emails, so you have to be patient, I'm sure they are trying their best to catch up on all the requests.
have you tried leaving the room then rejoining then regenerating the vpn and trying to download it then???
I have not. But it will try later today. Thanks
Gave +1 Rep to @plush bay
I'm trying to upload a CTF, but I keep getting this error "Problem converting VM Check prerequisites". I'm not sure what I'm doing wrong.
Requirements for importing a VM into Amazon EC2.
Thank you, I believe I meet all the fixes. I'm using vagrant to boot the box. The vagrant file is "ubuntu/focal64" which should be fine.
thank you
Gave +1 Rep to @gray loom
its working now.
@plush bay Thanks for the help. Leaving and rejoining the room helped. Now I'm able to connect to the Halo network.
Gave +1 Rep to @plush bay
Hey guys, i have an issue that has been left with for weeks, ever since i started using vms infact!!
Now whenever i have an instance on AWS with RDP and windows.. or linode with linux!
Every single time i try to connect to a vpn service i lose connection to my linode, rdp, account or whatever.
Even with burpe suit using proxies!! What is up with this, is it impossible to use socks and vpn on cloud based machines?? Has anyone else experienced this problem?
By the way i have used nordvpn, proton openvpn, free socks5 and paid socks5
hey, how to correct our name in Certificate ?
#site-support message
Still yet to hear back about this, have tried multiple emails etc 😦
VPN always been pretty whacky, connects then drops a lot, now I just run the troubleshoot script to initiate connection as that somehow makes it more stable. However this sometimes happens.
@gray loom there was a new commit 9 days ago you probably right lmao thanks
Gave +1 Rep to @gray loom
Hey techsupport I need help in tryhackme login as I forgot password & I did not saved email id
Do you know your username?
If not, you'll need to email support
Hi everyone!
Who could give me access to this room?https://tryhackme.com/room/bpsplunk
Nobody, it's private for a reason.
somebody opened access for everyone to this room (https://tryhackme.com/room/sqlinjectionlm) when I asked for, so I hope
So I want to start Splunk 3 room and I see this
BOTsv1 is private
Yes, It's private and won't be unlocked.
The content is old, and has been deprecated.
Yea I have username
Try log in with that.
I tried but saying username or password is incorrect
You might need to contact support then.
Yes, I have just sent mail to them
🙂
Why does my vpn for thm keep restarting
2022-09-22 07:54:38 [server] Inactivity timeout (--ping-restart), restarting
2022-09-22 07:54:38 SIGUSR1[soft,ping-restart] received, process restarting
2022-09-22 07:54:38 Restart pause, 5 second(s)
2022-09-22 07:54:43 Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
2022-09-22 07:54:43 Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
2022-09-22 07:54:43 TCP/UDP: Preserving recently used remote address: [AF_INET]54.193.240.1
Do you have more than one running?
Check how many are running by using command>ifconfig “Tun0” connection is your vpn if you have more like “tun1” tun3 … will cause problems did for me anyway,
To fix run >killall openvpn
!vpnscript
@silver moat ⬆️ use this to debug things
Thanks
I'm on a #mac. What is the reliable way, on a Mac, to cut and paste between the rooms and the attack terminal? I'm wasting a lot of time. Shift-Control-C haven't worked, Command-C and Command-V haven't worked, right clicking to cut and paste hasn't work. I see the desktop clipboard on the attack machine but it doesn't seem to work either.
yes
Thanks, I opened fullscreen but don't see a way to allow access to the clipboard. I clicked on "help" but didn't see an option to do this. Do you mean just slide it out of the side of the window?
not seeing this. I can't even copy the room links; it starts as a failure to copy.
Ok, @gray loom my mistake--I can copy but not paste. I can copy from a tryhackme room and paste into another document. WHen I open full screen terminal and right click to paste, however, I see the PASTE option popping up in the little window, but when I click it nothing appears.
try to copy to clipboard on the left-middle of your screen and try to copy from there and paste wherever you wanyt
and try to keep language bar in ENG
hello all. When using openvpn connection, do i need to add dns settings somewhere to resolve the .thm tld?
Which room are you doing ?
@crystal marlin File Inclusion
Where does it mention to navigate to a URL with .thm ?
ah i guess it doesn't 😄 http://webapp.thm i guess is just the example, sorry 🙂
as i experienced, if there is a URL to visit then either it is accessible from the internet or the openvpn pushes the DNS settings
either way, you don't need to tinker around your config
Sometimes you need to add the URL and Machineip to the host to access the site.
ah, good to know, probably i used too much the AttackBox nowadays
There is a few rooms it tells you to do, there is a few rooms where it doesn't mention it.
Upload Vulnerabilities is one of them, that mentions it.
hey guys I'm having an issue with Kali Linux
whenever I turn on monitor mode on my network adapter through the rooted terminal I keep getting this weird thing
it's like it's loading but it won't stop
everything just stops working and I can't even enter another command in the terminal
anyone know what I can do to stop this?
Doesn't sound like a THM related tech issue.
Use #infosec-general for such questions pls
ok thank you
hi
Hello.
are you listed above or below said person..... as then that means you have the same amount of points
what is 0x....
0x defines that the numbers that come after is a hexadecimal number..... in the case for roles on this discord and on tryhackme it is used to show levels based on the amount of points you have collected from doing questions on tryhackme:s website
How is shadow doing today/tonight?
blegh
OWASP Top 10 Cross-site Scripting task -> there is a problem in the machine it's not loading or it takes alot of time to load, can you fix it?
I've tried other machines so i don't think that the problem is with my connection and also I've tried to use the machine many time that's way i think the problem is in the same machine
Can you share the target machine IP?
Can I get some help on Upload Vulnerabilites Task 8? There seems to be an issue.
Yo hackers
I've a problem
Error: error on running gobuster: unable to connect to http://10.10.220.232/: Get "http://10.10.220.232/": context deadline exceeded (Client.Timeout exceeded while awaiting headers)
Showing this
When scanning room's ip with gobuster
I think connection is not made
But I connected to vpn and shows connected
Hello, I'm on Task 4 of "Intro to C2" - Setting up a C2 server. No matter how I try, I can not start Armitage. I get the error "Can't connect to X11 window server". I unset it to 1, 0, no luck.
@broken bear, can you please help with the above error?
Anyone?
I haven't done that room, just pinging a mod to help with this isn't going to oget you any answers - you may have better luck asking in #room-help
Works perfectly fine
it's not working with me I don't know what is the problem?
Are you using your own attacking machine ?
yesterday i tried to open the machine using the attackbox and it wasn't better
yeah
Is it a VM ?
If you check ip a s do you only see a tun0 interface or any extra like tun1, tun2 etc. ?
yeah there is 4 lo, eth0, wlan0 , and tun0
Try sudo ip link set dev tun0 mtu 1200
Then connect to the page again
k
nice it works now perfectly thanks bro
Gave +1 Rep to @crystal marlin
Hi, can anyone help with rustscan error code 11?
I, I have changed my main email address, i want to change my username and i cannot verify my token there. Is it possible to change of username and keep the progress or do I have to terminate the account. Also, why the message : Sorry this token is already used by someone. I am on the "new" email. Thanks for your quick answer
How can I know?
Have you completed the nmap room?
Hey, we are aware of the site issues, we are looking into it
@-ing random staff members will probably not help. I'm a content engineering so can't really assist you here.
Please email support@tryhackme.com for assistance.
^^
dear all, i have vmware player and kali, i try to use openvpn from kali, and i can't connect to tryhackme, i have TLS error, any idea?
Hey, we are aware of the site issues, we are looking into it
the login issue is one of them right ? or is it client side issue for me
Why is the site down?
Staff are looking to it.
Oh ok
someone just read the site name "tryhackme" and then he hacked the site
lol
Why do you assume it's a male?
they were asking for it tbh
hey everyone
thx i have opened a ticket but no news and it's urgent matter, i'm no more in the company, thx man 🙂
Gave +1 Rep to @cold fog
Hey
what is it problem?
Staff are looking to it.
I accidentally closed the browser while I was working on the AttackBox. After that, the site does not open. Cookies cleaned
have you tried to unplug and plug it again?
I just payed for my new subscription for the first time right now and got this!
This is just a blip.
Okeeey. I understand, we will wait then
You all should exercise patience. The support team will look into this issues, everyone one is affected is not just you.
So, let's give them some time to fix the site for now.
🙏🙏
website now working for me
I need 3 months free subscription as compensation for this outage
The outage caused severe mental health issues for me
for some reason my password didn't work after the website was back so i had to reset it
this is outrageous
bruh
it doesnt even work after resetting it
@bronze vale
i've changed my password 3 times to no avail
i was able to log in noramlly with the gmail button
but if i try to enter my email and password it keeps telling me incorrect password
This is a joke, right?
Might be
We’re not giving you 3 months compensation for a 10 minute outage
No.
ok maybe some help with yara room then
.
You're not entitled to anything 🙂
This was a minor blip that rarely happens.
Even help with a Technical issue ? unreal
Run your command with python3
same issue
I’ll take a look
also the room says python not python 3 but i tried both anyways
What task?
9
i started this room like over a week ago but i moved on to other rooms when i got no help regarding this issue
Okay, so you're running the command wrong. Loki is a directory, so you need to cd into that, and then run it via python loki.py like so:
Also, you'll probably have more luck getting help with rooms by using
the #room-help channel
Hi, how can i change my payment method ?
you should got an email when you first subscribed that includes a link to the payment portal thingy where you can change payment method and card details
Thanks
Gave +1 Rep to @plush bay
Hi, am trying to connect to openvpn but it stucks at UDP link remote, and after says that TLS handshake failed, any idea how to fix this?
I regenerated config about 3 times + changed servers
Fixed, was a firewall issue
how to connect amazon echo to college wifi which requires username and password ?
Hello,, I an a newbie,
.my issue is I can't "start machine" even tho my ovpn is on
Which machine are you trying to start?
When did you start the room?
brehh
Are you on the VPN?
yeahh
Does it hang for a couple seconds before closing the connection?
Also refused != closed
Not hang
Makes me wait
@shut jay This channel is for directly tryhackme related tech support
hello can anyone help me i have one month premium voucher code
how to use this to get a premium benefit
i am already premium user i want to use this coupon as well
Did you buy this voucher from thm? If you did not, please email support to check validity.
There are a lot of voucher scams out there, if you use a scam voucher code your account may be locked or banned
I'm not sure if this is the correct room but I seem to have some trouble with the room mr robot ctf. I'm assuming I'm supposed to ||brute force the wp login page with the help of fsocity.dicbut hydra tells me it's going to take about 30 hours to go through all of it||
nvm, I found the .ova, let's gooo :> edit: ||also I just realised over 99% of the rows in the dictionary are dupes, d'oh||
E-mail support
Retro isnt responding to any traffic from vpn or attackbox for me. have restarted everything, new vpn creds, not sure what is going on
How are you testing it?
Like are you just trying to ping it
Or
Have you performed an nmap scan?
Have you tried terminating and redeploy
Older windows boxes sometimes go offline after an hour
does it have a 5 minute boot time like some of the others?
It’s worth waiting an extra 10 minutes if you’re not receiving an immediate connection
will do.
sorry, nmap -Pn wasnt responding earlier. ill have 10ish minutes and try again
no clue. its responding now. guess im just a moron 😄
It’s okay they just take a little fiddling to get working sometimes
thanks for your help!
Going forward,
Retro is a Windows machine, so it won't respond to pings.
it said that in the text, thats why i called myself a moron. lol autorecon ran nmap -Pn when i looked back through the log. i had crossed the hour mark and guessing it either crashed or shutdown or whatever they do at that point
Sometimes it's the little things that can throw people off like this 😄
literally. tiny details matter. eh just rooted the room. just needed to pay a little closer attention
i was without an internet connection for a bit, can i get my streak reinstated?
thank you so much
Gave +1 Rep to @weary spindle
i'm not able to import the json file it says bad json file
in what room and task and question???
postexploit
from yesterday i was trying to upload json file but it say bad json file
oh okay
Regarding Post-Exploitation Basics Task 3, I found the most success using the Attackbox and the last Bloodhound version before version 4 (3.0.5 I think). After unzipping the download, run the file named "Bloodhound" in the folder using the "--no-sandbox" flag, and you should be good to go. DON'T use the version of Bloodhound already installed. As of 8/28/22, it's not compatible with the version of SharpHound on the Windows machine you're running mimikatz and whatnot on
crow
got it
Hello, I signed up for a student account but I can't seem to sign in. Who would I have to contact to reset my password based upon my paypal account?
I'm trying to reset my password through my student email and it's not sending.
How do I get in contact with THM that isn't the generic support or tech email. My account has for some reason had its premium status disabled, been close to 4 business days now and is progressing too slow. I am required my account for work purposes
😩
Hi @heavy ginkgo-support,
May I know why I'm unable to post screen shot in Discord posting?
You need to verify your account to be able to post screenshots here. Follow the instructions on the link below
!docs verify
noted with many thanks
Gave +1 Rep to @turbid ferry
Heyo,
i have trouble connecting to the attack box and to the machine in the final capstone challenge in the Linux Privilege Escallation Learning path. can maybe someone help me? 😄
What are you having errors with?
so either i am ^trying to connect via ssh and it does not prompt anything
and even after waiting for abt 5 mins or so it does not do anything
Is it attackbox's IP? Or your target's?
And btw please check if your vpn is working perfectly
the attackbox is too waiting for response
it is
already did. i also rebootet my machine just in case
sudo ip link set dev tun0 mtu 1200 Try that in your VM.
nice my attackbox launched now. so it should probably work. thank you 😄
Hi Sir, my Throwback lab has put on reset mode and it's been more than 20 minutes...
What can I do now?
Hi, I was solving Mr Robot. I got reverse shell then this happend I can't access wordpress dashboard but I can access index.html. Why?
What does it mean "tf" ?
I tried to reset machine but it's still not working
I mean i can access main page but not wp
So I thought that it was off limits to hack other attackboxes or IPs that aren't your target... someone definitely was trying to get in from another 10 ip.
I had an http server running to serve files to my target, and someone is using path traversal to read system files
dm me a screenshot please
I'm stuck on BurpSuite Basics, task 13 if anyone can help..?
@gray loom thank you. Will do
Gave +1 Rep to @gray loom
oh wow first instance shadow has heard of someone breaking the tryhackme tos in that way.... hopefully jabba can sort it out
This happens sometimes on AWS, as AWS (as a whole) is a popular target infrastructure for automated scraping by bots.
Right, and I've been blocking public IPs as they popped up; it just concerned me that it was a 10.x internal IP doing it.
A way to avoid it is using an uncommon port number when using http.server. 🙂
Fair point 😉
Also apparently you can't drop all packets from 10.x and allow only the target server's traffic, you'll lose interactive console. Hypothetically. lol
Hi guys, I'm having an issue with one of the room. "Intrusion Detection" is the room name. After launching the machine and registering an account with CTFscore, I just can't seem to login for some reason.
Things I have tried: -
- Restarted the machine thrice
- Each time created multiple accounts, each using the different tokens given.
Still the same issue tho
Hi- Today I'm not able to connect to Lateral Movement and Pivoting's vpn. I have regenerated and redownloaded the config, still getting the same error: 2022-09-26 19:33:21 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
2022-09-26 19:33:21 VERIFY EKU OK
2022-09-26 19:33:21 VERIFY OK: depth=0, CN=server
2022-09-26 19:33:22 Connection reset, restarting [-1]
I can connect to my main thm us-west-vip-1 vpn just fine.
hey all, does anyone know why I can access a room on my laptop (ubuntu, firefox) but it will not load on my PC (windows, edge)?
anyone know how to get to root in parrot OS
i can't download OpenVPN configuration pack for windows. Link not working how can i do?
https://tryhackme.com/vpn/get-config
Hi! Could someone please help me with this query? #743859653343182930 message
Sorry for spamming but being new to Throwback, i am getting confused and getting no help either
Have you contacted support on the website or email?
On the website? No.
Email yes.. But it's a little too early to expect a reply i guess. Emailed 4 hours ago
I just wrote a message here on discord as I'm unaware if resets on Throwback actually take this amount of time?
I'm only 5 days in at this point so a bit confused
Gave +1 Rep to @gray loom
Anyone unable to get network access to Breaching Active Directory? The attack box doesnt seem to have the tun0 interface, and can't communicate with the DC or any other hosts within the network.
Doesn't seem to have that either
from the browser within the Breaching AD room
Yeah have tried that a few times now - same issue. The Network seems to be 10.200.89.X but I have no interfaces on the attack box that reflect that
No interfaces reflect that either. Yes using the small power icon on the bottom left of the split view.
yes, was working fine over the past few days, now when I attempt to work on the network, it doesn't seem to give me a valid interface to connect.
Will try that, Thanks very mcuh.
much*
Nope - same issue persisting
Have you downloaded your VPN file?
Hey - Im not using a VPN file, im using the browser based attack box, but it doesnt seem to have a connection to the rooms network, but i cant seem to figure out why.
Hey guys, I wanna subscribe and I have found that there's 20% discount for students, or if I subscribe via paypal for 3 month, you'll give me extra month, could anyone help me how to do that? As the guide on the forum doesn't help at all
https://help.tryhackme.com/billing/student-discount
Getting the Student Discount A 20% student discount is guaranteed to accounts created using a student e-mail address. TryHackMe supports all student e-mail
I’m not sure if it was changed but you need to use the VPN file for networks?
Im thinking its just an issue with the site at the moment, so will just use a VM for the meantime - i only use the attack box for convenience lol
email help@tryhackme.com
Actually - looks like I just needed to leave the room and rejoin.
Hi, i've been smashing THM recently without issue and all of a sudden I have the dreaded spinning wheel of doom. I've cleared my cache and tried again yet no joy.
It only seems to affect the rooms themselves. I can access the rooms when I login to THM in incognito mode but struggling to find a fix.
Any help would be greatly appreciated. I'm certain it's something extremely minor i've overlooked.
Chrome?
yep
A few users have reported this, one said using Firefox fixed it.
Damn, I guess it's a google issue. Thanks a bunch all the same @weary spindle . 🙌 For anyone who has Kaspersky I found a thread that "may" help them. https://www.reddit.com/r/tryhackme/comments/omdi33/solved_rooms_load_but_has_spinning_circles/ I don't though so...
Gave +1 Rep to @weary spindle
Hi, is something going on? My tryhackme won't load any rooms
@zealous yoke Are you around?
@bronze vale When will Throwback network get fixed? It's been almost a day the network state is stuck at "Resetting"
Any help would be appreciated
Sorry for pinging directly in chat with mentions but nobody seems to answer in #743859653343182930 as well 😦
We're already pushing out a fix(:
Ctrl + Shift + R to force the fix in the meanwhile
On the ball 😄
Hi guys, need a little assistance if possible. I was running linux on my machine and had to send it for repairs. Since it came back it boots into bios. Using a live stick i noticed that my data is still intact within the ssd. Currently detecting my usb as boot. Any way to have it detect my efi partition instead and have it boot normally?
Thank you for the suggestion. Apologies for inappropriately using the channel.
Gave +1 Rep to @gray loom
Any news about this?? #743859653343182930 message
hello guys, i would like to ask you hot to redeem my 3 months premium voucher. thank you!
Do you have a paid sub currently?
If not.
Go to Profile > Subscribe > Use Voucher
oh my god im so stupid. thanks a lot!
can i also ask you how does a 7 days streak freeze work?
If you have a streak and you miss a day, it will auto freeze.
thank you man
Hello guys i creat by coincidence a workspace and i want to delet it how could i do it ?
Hi I'm doing the python for pentesters but i cannot seem to find a valid IP/target for the tasks... any ideas ?
the ip that is written on the python drafts 192.168.1.6 it's not reacheable
hihi
i'm on attacktivdirectory
not sure why i'm getting this after using GetNPUsers.py
This 192.168.1.6 is incorrect IP, start the machine and wait for a minute and you will see your target IP
Hi all! So I decided to try and just make my own Kali box with VMware Pro and I downloaded the premade virtual image. However when I run it, it takes me straight to the log in screen and never does setup. Is this normal? I don't even know the credentials to log in
This isn't the right channel for that, this is a channel for tryhackme.
But yes, this is normal, the pre made image is already set up for you.
Whoops, where do I take this question then? I have no idea what the default info is.
Ohh kay nvm I found it
didn't think kali had default credentials..
General is a good place for non thm.
Yeah, pre made has default.
Do you want to set your own up from scratch?
hello could someone help me
Import-Module ActiveDirectory
Import-Module .\PowerView.ps1
Write-Output "Starting"
$dc_domain="somthing.local"
$SecPassword = ConvertTo-SecureString "abc123" -AsPlainText -Force
$Cred = New-Object System.Management.Automation.PSCredential('somthing.com\mike', $SecPassword)
Add-DomainObjectAcl -TargetIdentity "Network Audit" -PrincipalIdentity "mike" -Rights all -Credential $Cred
Add-ADPrincipalGroupMembership -Identity m.lovegod -MemberOf 'Network Audit' -Credential $Cred -Server dc.somthing.com
Get-DomainGroupMember -Identity 'network audit' -Domain $dc_domain -DomainController dc.somthing.com -Credential $cred
the error
Starting
Exception calling "FindAll" with "0" argument(s): "Unknown error (0x80005000)"
At C:\Users\ff\Desktop\PowerView.ps1:6663 char:20
+ else { $Results = $ObjectSearcher.FindAll() }
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DirectoryServicesCOMException
Unable to resolve principal: mike
At C:\Users\ff\Desktop\PowerView.ps1:8529 char:13
+ throw "Unable to resolve principal: $PrincipalIdentity"
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (Unable to resolve principal: mike:String) [], RuntimeException
+ FullyQualifiedErrorId : Unable to resolve principal: mike
Anybody have experience reverting back a SSD from only usable with an Xbox to it being usable with any device
@gray loom oh got you thanks
Gave +1 Rep to @gray loom
remove the -L flag
-ban 783534767386787912 -ddays 1 advertising nsfw discord
🔨 Banned YKS#6700 indefinitely
hello tryhackme discord. i would like to ask help on how to change username so that it looks good when badges are shared in linkedin. thank you.
You have to email support for username changes
thank you so much
Gave +1 Rep to @crystal marlin
Hey @crystal marlin do you mind if i DM you? I need some help and guidance related to issues I'm facing
Depends on what type of issues ?
Related to Throwback not working since almost 3 days
Okay, well there is not much I can do for you unfortunately.
So you better ask in #743859653343182930 or email support.
Tried everywhere. Sent emails but no fix issued at this point.
And in #743859653343182930 nobody except Cyrlic is able to help. No fixes or acknowledgement through emails too
You mean you haven't received a reply to your email ?
Yes i emailed support and help about the issue asking them if they'd also compensate us for the lab time lost due to server side issues.
No reply since two days
Explained the issue well in the mails too
Okay, well you have to be patient, it's not going to help you or support if you keep on pushing.
I'm sure they will reply to, but probably they are still on a bit of a backlog due to the previous event
Thank you for replying! I'm losing way too much lab time due to these issues.
It's hard to be patient when there's no acknowledgement from either sources, so thought of talking to someone from staff
Gave +1 Rep to @crystal marlin
@bronze vale Do you mind if I DM you a question regarding an email I sent to support? It is in regards to upping RAM on a private room.
You may
Hi.
In JR pen testing under SQL Injection Task 6, when I insert the flag of level 2 after bypassing the login form, the sites says wrong answer.
Is it a bug or I'm doing something wrong?
Which flag are you trying?
I now noticed that it's the same flag of level 1, so I guess it's not showing the new flag even it lets me move to level 3
THM{SQL_INJECTION_3840}
Aye, wrong flag.
Yeah, why it's not showing the correct flag?
It says that I did bypassed the login...
nvm, I figured it out
I need to move to level 3 to get the flag of level 2 ( a little weird and confusing to do it like this if you ask me...)
Thanks anyway!
same. is it something to do w the target system?
sure let me try
it looks to me that there's some config issue w samba integration within the target machine?
ok i restarted it
ok finally done
thanks
not sure what happened
inputting the password later works
but if i did it w the password, the same error appeared
oh
thanks
mayb i need to restart samba?
hihi, password is wrong? i managed to get the credentials from one of the folders
but when i did a secretsdump, i got this error?
ty, handled
Thanks!
Gave +1 Rep to @chilly pike
Hello is anyone around?
ello
i only know basics and ceh
should i start ctf or wait until i finish oscp?
you can start doing CTFs any time. Try some easy ones https://tryhackme.com/hacktivities?tab=search 😄
sort CTFs by difficulty
Hello I need help with Windows Fundamentals 1 I can´t connect to Remote Desktop
ok thx 
Gave +1 Rep to @chilly pike
Hey guys! How do I add a new TryHackMe account token to my discord while having an existing token?
Hello @zealous yoke , I want my token revoked so I can add another account to my discord. Please help!
Also, Can I add the TryHackMe bot to my own server somehow?
oh srry
no worries:)
yes i lg
ok
Yeah, it's down. 😥
@zealous yoke Please help
its up now
What exactly is the issue ?
Hello, is there any support staff I can DM regarding my streak restoration request?
I accidentally used my old account token… I want the new account connected to my discord. So please revoke my current THM token
I can't find the "Teams" location anymore. Did it get moved?
You need to email for that.
!support
Yep I sent an email, got streak restored, but with the wrong number, I replied back and got no response since Monday
Send me a DM pls
Yup, just wait patiently for the response.
OK guess I'll wait and see tomorrow
how to stop timesync between ubuntu host and parrot os guest in virtualbox for the guest?
Hi, I need help with my account. Well, my premium is gone and currently my account is like Free. So I paid for the annual plan. How can we solve?
They will help 🙂
This channel is for THM related support, use general for this sort of question, also did you google?
Sup I need help related to the site's OpenVPN. Every time I'm toggling on the vpn I lose access to the internet. I guess it's because I'm using the vpn's gateway which I'm sure is disconnected. I tried using the thm-troubleshoot thing from GitHub but it still doesn't work. Can someone please help me?
Thank you very much, I will send the email to support
the solution has been found
thanks for u r help 
You should be using the VPN in the CLI.
Are you on Linux?
Yeah I'm on Kali
Sudo openvpn /path/tp/vpn/VPnname.ovpn
Can't I somehow configure it so that I can just click the VPN button to toggle it?
It won't work that way.
I don't want an open terminal while I'm connected
Well thanks then
Guess I'll just move it to a different workspace
Thanks @weary spindle
Gave +1 Rep to @weary spindle
You can move it to the background with ctrl + z, and recall it to the foreground with fg, should be in one of the first lessons
Oh ye this could also be fine
Talking about OpenVPN, it seems my connection stopped working. I can no longer download a new OpenVPN config either for some reason? It keeps redirecting me into a 404, no matter what region I pick or if I regen it
Aaand now it downloads nvm
Guess some regions being pesky
Leads me to this
And OpenVPN seems to initialise fine?
betting on the mtu not being the problem from the openvpn trouble shoot script
Ctrl Z backgrounds it no?
Or am I just being incredibly stupid
oml
I'm just being stupid
So how can I background it without freezing?
Or do I just use another terminal tab?
Ahh
If there'd be an error with OpenVPN would it log it out tho?
Gotcha, thanks for the help everyone <3
shadow does not background the openvpn running and instead has it in another terminal tab or they risk forgetting to shut it down
Just minimise it better.
heya, the linux priv esc room from junior pentester doesnt spawn a target in browser on task 8, and i cant ssh in for some reason
ssh karen@10.10.125.185 │ssh: connect to host 10.10.125.185 port 22: Connection timed out

