#Bandwidth Sharing FAQs + Troubleshooting
1 messages · Page 2 of 1
My dad needs internet more or less 24/7 and I have a guest sleeping in the room where the router is
they both stopped at the same time as well
it's probably your account
also check if there are any blacklists on your isp router thing
contact salad support
they should be able to help
i have sent a message to support
good
i'm looking through the logs on my laptop because that has old sgs logs
before it stopped working the lines had non-zero values for "BidirThroughput"
as you can see here
but now its zero
yeah the numbers are the data/jobs going through your network
its 0 when you got no job
Jeez it's so bugged. Sometimes bandwidth client refuses to start at all, and when it does eventually start the earnings seem to be low until I mine for like 5 hours straight. I guess ima have to keep my computer on 24/7 for max profit
how do i enable bandwith sharing i enabled it but its not doing anything
chaos
wait for at least three planets in the solar system to align relative to the sun
lmao
its just given up on me
got a response from support and my account isn't flagged in any way so idk
its funny how the fans on my laptop sound like jet engines when i remote into it
it's ascending for a moment there
ive been netowrk shareing for a day with starlink pretty fast speeds but i only made a cent in a whole day
living in usa
Joe
Wym Joe
wdym with starlink
thats my inernet provider
sick
i wish they had that in the uk
also doesn't just the router cost like $400
what speeds dya get
anywhere from 20 - 80
oh
your most likely not getting any jobs
Was cheaper than our other service and way faster
starlink is very good for remote places and cheaper with better speeds
CHeaper?!?1/
waht
last time i checked the router costs $400
most isps probably dont even have coverage if youre in a remote area so itll cost way more than 400$
plus 400 should be just the set up
fair enough
polluting low earth orbit fr
I agree with you lol
There enough room
most definitely not.
We are rapidly running out of space
do you know how many trackable pieces of debris are currently in low-earth orbit?
Doesn't mean it's full
it goes at super fast speeds
There are approximately 900,000 pieces from 1 to 10 cm. The current count of large debris (defined as 10 cm across or larger) is 34,000.
It kind of nestles us
in a dnagerous blanket
meaning we have to wait for it to slow down
or the rockets/satellites get pelted at
How fast do they go
I read 200k
It's very likely that the amount of debris end up spiralling out of control, as debris smashes into satellites, causing those satellites to split into a bunch more debris, etc.
ye
Like a less dangerous nuke
But more long term
and annoying
have you heard of kessler's syndrome
well, this is the bandwidth sharing 'channel', like #container-beta
mega thread if you will
yes
yes
yes
yes
yes
I made an exception for sgs-client.exe in windows defender firewall and now it seems to be working again

nice
This could be a notable troubleshooting tip, hmm~
- Try allowing 'sgs-client.exe' through your firewall
Guide here I guess: https://www.howtogeek.com/howto/uncategorized/how-to-create-exceptions-in-windows-vista-firewall/
oho scelli just sent an epic guide; https://cdn.discordapp.com/attachments/1021501189977813002/1036389025038225439/unknown.png
where did u find sgs client from
nevermind ive found it
quite a flush moment
No
frfr
who
many gigabytes
Imagine having working bandwidth sharing
I don't even see the bandwidth sharing in file explorer
have you read through the pins yet?
Pins?
pinned messages in this thread
Oh, ok, I forgot about those
No

this helps a ton guys
if i keep gettin this 4$ a day ill get 120 a month 😳
so far been good for the past 5 days
yesterday was a bust but that was my fault for restarting the pc and losing my spot in bandwidth sharing
Bruh how does bandwidth sharing even work for all of you
Mine is just always dead
Also funny number
140 down 22 up
virgin media came in clutch and increased my speeds for free
When you run salad with bandwidth sharing do you get put in to this queue thing
Idk how to explain it well
But yeah
same
mines always running
i use a auto mouse mover thingy to keep the pc awake
'move mouse' on microsoft store if anyone needs it :)
or u can just disable sleep and stuff in control panel
Sus
that's.. an odd way to avoid disabling sleep mode
i know
i have sleep mode disabled but my laptop decides to turn off its screen and then after a few minutes go to sleep if i leave it alone for some time
this just makes sure it doesnt
lol
open
is there any chance bandwidth sharing is going to be enabled for Japan, or any other countries?
Letsgo nice
it's still in very early stages
maybe thats why my moneys been not existing
That's not a real file oath on my PC lol
If the file doesn't exist, you could try creating it yourself, the latest sgs-client seems to be here^
You've just gotta put that in a correctly named folder - I'm not absolutely sure on what it's called for the US/DE, but I know UK is;
UK - Bandwidth-SGS-UK-0.1.8
For the other two I'd assume it's;
US - Bandwidth-SGS-US-0.1.8
DE - Bandwidth-SGS-Germany-0.1.8
Anyone feel free to correct me if I'm wrong 🙏
pretty sure Germany is DE
like in the thingy
I'm sure that Salad will have places with faster average internet speeds in mind 
All we can do is wait and see what happens~
hmm
That's probably a grey area - if you wanted to make sure that you're doing everything absolutely right, you could ask your school for permission to do so..
orrr you could do it anyways
well
well containers are not crypto, though it most likely breaks other laws/salad tos
Ok
it wouldn't be cryptojacking, but it could still be using a computer for purposes other than those which your school intended for it to be used for
I mean the school
Allowed students to use the Mac freely (also safely) when not at school
Like gaming
I personally don't see much of a problem with it then
at the end of the day its a mac, im not even sure containers will work on bootcamp
True
as people had issues even running salad normally on it
Nvm I'll just stick to my PC lol
E
When will bandwidth sharing further expand
There wasn't anything new about bandwidth sharing for 2 months i think
You are asking a question that nobody knows the answer to
Now I will cry because of you
I'm glad to hear it ^-^
Salad told us they were working on the areas that it’s currently available too, brining more companies in for the bandwidth to be used
and they have done that
as in the uk and Germany more peoples bandwidth is getting used
Your pain is enjoyable :) 
I (think) I've got a fix for sgs-client not running/not even being in the workloads folder, I uninstalled salad and deleted the whole workloads folder and reinstalled the salad container beta and now sgs-client actually gets installed when running salad for the first time and it starts too
Before, it wouldn't even start for me even after uninstalling salad and reinstalling it, but deleting the workloads folder fixed it
kinda weird but at least it works now lul
yea, also is there anyway to stop xmrig CPU starting when you do container workloads?
unfortunately not currently
hopefully they'll make cpu mining and container stuff be separate soon
alright cool, because I've started to run salad on my school laptop and when running container xmrig starts and it just thermally throttles 🗿
yea, that'd be cool
yeah and that's not some 'soon™️' thing - I was really expecting this to exist already
same tbh but maybe the devs are busy making other workloads 😳
let's hope so
because whatever those things could be are being prioritised over a number of annoying issues
like the blogs being broken, and the pantry being broken
hmm
yeah they've made progress
Shame the store and earning history aren't built into the desktop app too 
it just sucks how slow it is, because their team is still so smol
yes!
i miss back when the community was kept more in the loop with their development progress
When was that?
quite a while ago 
still, this community is mostly a W
I never really expected to be this active here but everyone is actually nice and chill
yeah it's surprisingly nice
i swear a couple years ago there was always something bad happening
This has to be one of the best servers I've been active in, I used to mod some other servers a little bit and it sucked
I'm pretty sure SaladBind brought a lot of annoying people here tbh
hmm
I wouldn't say that it brought annoying people here - it defo brought people that didn't know how to read docs, but I'm pretty sure the annoying people were here regardless of Saladbind
eh, yea I guess so
weirdly, I get a lot of DMs from this server from people asking how I'm earning so much when I post a message in #show-off-your-earnings
I don't really mind it too much, I'm kinda used to getting support DMs from other servers lol
I try to be as helpful as I can
Also, if SGS-Client stops starting again, can I just run it from command line with the machine_id and server_host_port thingy or will I not get earnings?
idk if anybody's tried that lol
I think I've heard of others doing so, but I'm not really sure if it's worked consistently
yea
you're welcome to try it out and let us know how it goes ^-^
I think I start by doing cd C:\ProgramData\Salad\workloads\Bandwidth-SGS-UK-0.1.8
Is there any easy way to copy command line from task manager?
I used process explorer to get it :3
It says "connected to server" but I'm not sure if the earnings will still come through
it seems to be working
why are you bars dark green
operaxgx force dark mode I think
Restarted my pc, bandwidth sharing not working again
gonna try this
tbh idek how the container thing works
where should I enter this ?
what?
doesnt work
it does
no it doesnt
for you maybe
its so luck based
ive got it working for a few times
but then every time i restart my pc it just goes bye bye
You legit said this, so I'm sorry but you can be quiet
even when the sgs thing file is in the workloads folder
it doesnt link
what
what are you saying
I'm saying you don't know what you're talking about
open cmd, do cd C:\ProgramData\Salad\workloads\Bandwidth-SGS-UK-0.1.8 and then run the sgs-client command line arguments
why u being salty cus i cant get it working with your method 
I'm not
then why u telling me to be quiet when i was just asking a question
i also explained why i asked it
That happening to me too, I fixed it by removing the workloads folder and reinstalling salad
What did you ask
All you said is "it doesn't work"
this question
well i did explain why i ask that question after
i just dont get why ur telling me to be quiet when im just here tryna get help
¯\_(ツ)_/¯
I'm telling you to be quiet because the only things you said are "it doesn't work"
I don't wanna start an agurment so let's end it here anyway.
For manually starting sgs-client?
na
Or just making it work on general
Do you have the bandwidth folder in the workload folder?
yeah ive put it manually
i got it working by adding all the files it needs
like the workloads one and the logs one
and did this
will tell if it works
you didn't add the arguments required
how do i add them
you need at least server_host_port and machine_id, which can be found in your logs when Salad starts sgs-client
welp
welp x2
you can only get your machine ID when Salad starts it at least one time
or, if it's easier, in taskmanager
if it does how to i set them up
the same as it shows in the logs
wait does manually starting it work?
something like sgs-client.exe -machine_id {id} -server_address {address}
as i have my machine id
-machine_id xxx -server_host_port sgs-rose-gateway.salad.com:443 was mine
oh wait lemme try something
Has everyone had success with manually starting it though
its still missingn
but its in the log files
i think the problem is sgs-client.exe is not reading what is in the logs file
or maybe its not even starting
it said invalid syntax when using -server_address so I changed that too -server_host_port and it looks like its working now
i will leave it running and see if i get any jobs
i got it running by enabling and disabling cpu like we all know
you just have to keep trying
could be but sad
some days are gonna be less then normal, others your gonna earn more
same is gonna be with containers
rip
but it's been declining the last few days
mhm, I was getting less jobs too before
it changes a lot over time
it will recover
as you can see
it went down and back up
hmm got it thanks
prob more earnings in weekends
average earning rates from solely bandwidth sharing in uk?
running on two machines
only bandwidth sharing?
yes
bandwidth
cheeky
let's say i got 1000
it's strange cos
i used honeygain
and i'm literally making 1 cent per hour
you can get more with salad
much more
my friend who runs only one machine
bandwidth sharing only
1 gig both ways or is that just download
both
nice
what the fuck
holy shit
are you running two machines on the same ip?
or different
@peak terrace
i run 2 pcs on 1 ip and got $8 in 2 days once
same ip
damn
I get $6 per device
uk
still better than my stupid 70 download 10 up
lul
salad brokey on my pc
reinstalled
now bandwidth sharing not workey
doesnt even download
all the tricks are not doing anything
same
It appears that manually starting sgs-client does in fact work properly because it when you run it, it creates a log file!
does it show in your main log that its running though
what am I looking for @frigid reef
if you send the log here i can look for it
It does say stuff about bandwidth in the look but I don't know what in particular I'm looking for
doesn't it have my IP in it though
lmao
got your coords
lets goo i sent this in the future
send me cookies pls
-727 84 376
Nova i thought i told you to stop time travelling
b-but
yeah its showing up
nice
also wrong reply and im not using modded
😳
for some reason my time on my pc is fucked
Hi
ozua what time is it atm
yk how it's running a cpu miner inside of the container... does that mean that bandwidth sharing also won't work
it will work
because cpu mining and bandwidth sharing don't work together in normal salad
it still counts as a container
I honestly don't think bandwidth sharing has even been running properly for the last few days but oh well lmao
yesterday
thanks qt


sgs-client isn't even in my salad programdata
how do i get bandwidth sharing to work
have you checked out the pins of this channel?
How do I know that my Share Bandidth is working?
if you are making money then your share bandidth is working
Yea butttt
Any other way to check that?
becuase also mining with GPU, CPU
you can check logs ig
I just get
2022-11-05 11:21:34.279 +01:00 [INF] {"level":"info","ts":CENSORED,"caller":"logger/timed-logger.go:235","msg":"timed stats","BidirThroughput":0,"ErrorRate":0,"TTFB":0,"NGPCsQZ":0,"NGPCsConnected":0,"NRoutes":0,"NNodesWithRoutes":0,"NRoutesLeastLoad":0,"NRoutesGreatestLoaded":0,"NGracePeriodReconns":0,"NHappyPathDisconns":0,"NErrorPathDisconns":0}
2022-11-05 11:22:04.290 +01:00 [INF] {"level":"info","ts":CENSORED,"caller":"logger/timed-logger.go:235","msg":"timed stats","BidirThroughput":0,"ErrorRate":0,"TTFB":0,"NGPCsQZ":0,"NGPCsConnected":0,"NRoutes":0,"NNodesWithRoutes":0,"NRoutesLeastLoad":0,"NRoutesGreatestLoaded":0,"NGracePeriodReconns":0,"NHappyPathDisconns":0,"NErrorPathDisconns":0}
In the Bandwidth-SGS-DE Log file
that's everything you're getting? you could send it over so i can see if you missed something
but you can also take a look at the pins of this channel
for some reasons/ways to fix it
yes
no effect
salad need to fix bandwidth sharing asap
is there a way to start bandwidth sharing via cmd?
there is, but it won't help if this is whats happening
Does bandwidth boost earnings? (I don't really understand what is it)
yeah you earn from sharing your bandwidth
how?
If you're in the US, UK, or Germany, you'll see a toggle to enable bandwidth sharing in the Performance tab in Salad
is there a way to start bandwidth sharing via cmd
yes
you can run it from command line, but you'll need the machine id
i’m thinking, do you even need the salad client installed
because there’s things like saladbind
they just fetch ur config details and use a custom miner and pool
yes you do, because you need to get machine id from running bandwidth sharing from salad
You still need Salad to initially generate your ID
what are the parameters
something like sgs-client.exe -machine_id {id} -server_address {address}
where do we get the server address from?
You can get them from taskmanager or process explorer or something
And if Salad ever changes the address that it uses, or decides to change your ID after a certain period of time, you'll be a bit screwed
yea lol
that’s fucking shit
nah, not really
it's not like they intended for you to run it yourself lol
it seems everyone has the same server address
I've seen people with different addresses
if ur in the same region i think
are u UK?
also @upbeat shuttle is it normal for GPU mining to stop if the container is using resources
I am in the UK, yes
It shouldn't stop
when the vmmem started using memory and cpu, xmrig stopped >:(
it might have just terminated itself actually
sgs-rose-gateway.salad.com:443 is this your server host port?
mhm
yeah then probably same region = same server host port
did you allow sgs-client through firewall?
also which version of salad are you on
because my earnings with bandwidth sharing weren't as high as everyone else
How much
You can check the bandwidth sharing log files and at the top should be the command salad is running
Just put that in cmd
0.00165 in 15 mins
it says connected to server on 2nd line
and at the top the parameters
but that's in the logs
yeah that’s it
copy those and you can run them in cmd
my salad earnings don't seem to be showing
sgs-client is using less than 1mb
and i've whitelisted it in my firewall
how long have you been waiting for
like 10 mins
you aren’t going to earn immediately
You earn as jobs are available and assigned to you
so some days you will get more jobs, some less
i waited 30 mins once and sgs-client wasn't even in my workloads folder
but you’ve said you got the log files now right? So you have it now
also don't each one of these lines mean a new job
'BidirThroughput' being anything but 0 means that's a job
yup so no jobs
all of mine were 0 but i made SOME money the first time i got sgs-client working via salad client
currently
Check your dms
@stiff wedge @peak terrace when running sgs-client, are your machine id the same on both devices?
no
Nope
container and bandwidth sorks for me
works
i don't get me earnings lol
i can't seem to get a job when doing it via cmd
but when i do it via salad i ez get a job
Is there a trick to get bandwidth Jobs?
Because like I aint getting one or having any other error
the pinned messages here contain all of my knowledge :)
sgs-client doesnt even run on my pc lmao
but u said u earn wtf
yeah
because its running on my laptop
before it would run on both my laptop and desktop pc
for double earnings
but now only my laptop is earning
it stopped on my PC because I turned on my vpn to download a copy of a media item I own a physical copy of 
so when I turned off the vpn the bandwidth sharing option disappeared in salad and it hasn't worked since
just restart salad
I have restarted salad, reinstalled salad, rebooted, everything
doesn't do anything
try mining for aminute
then restart salad
check if the vpn is still on
the vpn is off
check
i've tried and checked everything 
do you still have the enable bandwidth option
as i said i've literally tried everything
which country are you in
it has come back since I restarted salad but doesn't do anything
uk
take your ip and feed it into those whr is my ip things
i have done this
maybe ur machine got blacklisted for using a vpn
try restting ur ip anyways
how does one reset an ip
turn of router wait 10 mins
if you have a dynamic ip then turn off router for 30 mins
restart ur router
then restart it
you will be reallocated a new ip from a lease pool
for some reason i enable and disable cpu mining then sgs-client.exe opens
how about u restart ur ip
yk when u reinstall salad
completely clean ur salad program files folder
programdata
and appdata
then try
wait is the problem that bandwidth sharing doesn't show or it doesn't work
it doesnt work
u got sgs-client on ur workloads folder in programdata?
have u tried running it and waiting like 30 mins
no matter what I do
cos i had to do that the first time
i've waited about 8 hours
jeez
doesnt do anything
did u whitelist the salad folder?
yes
it always has been whitelisted
I even put the sgs-client.exe file in manually in its own appropriately named folder
doesn't even touch it
this might be an absurd idea
but why don't you try using another salad account
and see if it has any effect
or check if gpu/cpu mining works (if possible in ur case)
also does anyone know what the first 4 parameters mean
i can't get any jobs running sgs-client via cmd
but with salad client i can
then why r u running it with cmd
you can’t have more than 1 account
for testing purposes
still
because i want to create a service that runs sgs-client with appropriate parameters to get salad balance
im signed into my friends account
this means i don't need to login to my account on windows to share bandwidth
ur machine probably blacklisted
sent a support ticket
Are UK and DE bandwidth earnings still static?
nope
youll probs earn more now
My isp seems to dislike salad
I have 300mbit Plan and suddenly my maximum is 90mbit
Checked my IP quality,said high risk IP(ip tunneling for malicious things)
Also restarted Router,no changes
Now ive closed salad and wait a couple days to see if it normalizes
check if you have a dynamic ip
Does someone know whats the Problem here?
Aint getting any money/jobs or smth
Just this weird thing
look where it says BidirThroughput
if it's a 0 that means u got no job
anywhere that is anything but a 0 means u got a job
if u ran sgs-client.exe directly via cmd with parameters, don't.
i don't think it works
do bandwidth sharing via salad client
salad client?
Doing it via the salad software
how long did you run the miner
Idk 7 days
7 days
the official salad app ^
i got that
Okay I did that
Lets wait
also bandwith share?
Or just cpu and gpu
^
noo I had to restart my router and I lost my bandwidth sharing spot 
sgs client still runnin tho
nevermind I manually opened sgs client after restarting salad and now there's network activity again
ok
@gleaming wraith quick question
So if I have BidirThroughput":0, It means I got no Job
why isn't it getting my full internet speed??? Even when I run librespeed myself, I get my full upload speed
it's causing sgs-client not to run
Bandwidth sharing honestly hasn't been working for like a week now and it's so annoying... I've tried both the normal salad and the container beta and it still doesn't work
VS when I run it myself
yes
have you tried contacting official support
I have, they have no responded yet
Sup
2022-11-06 02:00:16.133 +01:00 [INF] {"level":"error","ts":1667696416.1329908,"caller":"ingress/api-client.go:49","msg":"sending ws close err: use of closed network connection","stacktrace":"github.com/SaladTechnologies/sgs/pkg/ingress.SendClose\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/pkg/ingress/api-client.go:49\ngithub.com/SaladTechnologies/sgs/pkg/ingress.ConnectToSGSServer\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/pkg/ingress/api-client.go:188\ngithub.com/SaladTechnologies/sgs/pkg/ingress.ConnectToSGS\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/pkg/ingress/api-client.go:497\nmain.main\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/cmd/sgs-client/main.go:47\nruntime.main\n\tC:/Program Files/Go/src/runtime/proc.go:250"}
2022-11-06 02:00:19.178 +01:00 [INF] {"level":"info","ts":1667696419.1783516,"caller":"ingress/api-client.go:144","msg":"Connected to server"}
This error popped up in the logs... does someone knows more?
also getting 0 jobs in 1 week
I have they said the sgs-client will run itself once you get a job
but that's not how it works
That is how it works.
But I am not getting any jobs but it is running
- Salad can't detect jobs when the exe isn't running
Yeah since there's only so much bandwidth that needs to be fulfilled - once they manage to get more bandwidth sent through us, I'm pretty sure more people's bandwidth sharing will start working
Mine suddenly decided to break too
lol
I was earning $5 a day yesterday, now I'm earning nothing
finally my bandwidth sharing works 😭😭😭
my bandwidth sharing is still dead
same
same
bandwidth sharing is completely f'd on my computer

works fine on my laptop
that's getting me an easy $1.7 a day
but my desktop is just not having it
SAME
bro my sgs-client is not installing
maybe not global, but most likely 1 or 2 more places
whats speeds do you have?
Where are u from?
And what are you currently earning?
no i take them
22 up 132 down
UK, earning around 3.2-3.5 a day
1 container and bandwidth
im earning 6.225 from bandwidth rest is containers
my bandwidth is still deada :?
I was earning $110 a day
$$10
doubble clicking keybbaords are annoying
@upbeat shuttle took the other ones
:(
I used to get jobs 24/7 on my laptop, but I moved the laptop to a different access point in a different room and now I get 0 jobs
kinda annoying tbh but whatever
and now these are my earnings with container (?)
the thing is as soon as sgs-client stops either if its your internet going off or you stopping salad, you get sent back to the bottom of the list of getting workloads, this is why the longer you have salad on the more jobs you get
yes as i said you been sent to the bottom of the list, there is no telling how many others are waiting
mhm
took me like 6 days to start getting jobs after my pc crashed
but 3 days !?
damn wth
but in the uk they have the least amount of jobs atm
ye salad is working on getting us more jobs
cool cool
they should have like a page that shows you where everyone who is chopping is at
like location wise
https://salad.com/images/salad-network.png not sure how updated this is
ohhhh wtf I never knew that's what that is lul
looks to be the first revision of that image still
which is at least as old as mid-july 2022
ye ye
why nobody use salad in greenland 😢
i'm having the same problem
Salad didn’t even install sgs-client for me so I make no earnings from bandwidth
you can always try the methods in the pins of this channel to try and fix that
I’ve tried all of them I guess I’ll just wait till a new update then maybe it will be resolved
if you go into logs there should be a folder called ndm, inside there can you send the latest file
I’m not home right now but I can send it when I get home
I’ve checked it before, it’s the one that has your download and upload speed right
It was measuring 8 Mbps even though I have faster speeds
ye thats why then
you need to somehow make it get higher, most likely by stopping other stuff from using the internet
What’s the max that I need
Even then it’s weird because before I downloaded the beta sgs was running
around 10 or 15
minimum
when i check online it says "likely static"
i already tried to disconnect it from the power,no changes
Nothing i can do about it except calling my ISP ?
since your ip is "high risk" yeah
idk i think ill just uninstall it
earnings went down from 1$ to 0,30$ before as well
not worth the hassle for me
but bandwidth sharing gives me $6 a day
or used to
yo
i dont even have the bandwidth option
Never had more than 1
Was always maxed at 1 in germany
help?
That isn't true
Some people in germany are earning $8 a day
I remember the news post and Email i got where they stated that u can earn up to 1$
Maybe that changed after it went out of beta but
For me it only got worse instead of better (30 cent)
so do i need to do something to get the bandwidth option?
it has "gotten worse" or better because during the beginning of the beta, the earnings were static
but since then its not static anymore and now relies on how many jobs you actually receive
so some people can earn more but some can earn much less
answered in #community-support
Just saying ive had it running for weeks and i earned 1$ previously
Then it went down to 30 cent
So im clearly the loser in that race and i will have to leave the race
Good luck to all other participants tho
you need to be in the uk, germany or usa
vpns dont work
maybe you just jave garbage internet
fiber 300mbit connected over cat7 ethernet
On speedtest its 1-3ms latency (league of legends for example has 9ms latency)
cat7 
about to crash your pc so you have to restart it and it stops working
🙂
would cry ngl
I left it on for 6.30 hours and I made $2 which is nice ngl
@subtle condor are u using the beta in #container-beta?
mhm
how'd u get it working
this frustrates me lol
why can't sgs client be installed straight away
I just left bandwidth sharing on for a few days
what is your upload speed in the ndm log file
what's the path to that?
C:\ProgramData\Salad\logs\ndm
found it
shit
had my ip
but basically 200+
almost 400
why tf is it selecting germany
i'm uk
thats normal also okay thats not a speed issue
also allowed salad through firewall
Workloads folder don't exist
I make nothing with network sharing
Infact ProgramData don't exost
You could try what the Salad support agent suggested to me:
I just left it running with GPU mining and container and about two days later, it started working
I'm hoping if I pause salad for a quick internet down time, bandwidth sharing will still work after 😅
me: turns it off for less then a second
salad: BACK TO THE END OF THE LINE
ikr
same
I had a 5 minute downtime so I could move my access point, and restarted salad and I'm getting jobs 🙂
bruh
im here having my laptop on for days and still not getting bandwidth jobs
speed?
My speeds went up now I think it was an issue with my isp now salad automatically installed sgs-client
two fucking days
jesus christ
Bro, Salad is legit just a bit of fun. If you want money get a job or something ☠️
not very fun if u can't even get bandwidth sharing working 😔
i'm not using salad to make a living
just get some gift cards and stuff
i accidentally restarted my pc
now it works
and it is paying even more lol
same
earnings dropped like crazy
but bandwidth is still sharing at 50mbps
feels like payout decreased for me
bandwidth depends on how many jobs are available too
Some days you can receive more jobs some days less
mmmm
- I've just experienced first-hand that the bandwidth speed test that Salad uses can sometimes just pick an absolutely awful server to test your speeds. Check your latest logs at
C:\ProgramData\Salad\logs\ndmto see if it meets the minimum speeds - 10mbps for UK/DE, and 5mbps for US.
If the final result ('Download rate' and 'Upload rate') is not above this minimum, sgs-client.exe will not start. The best way to make Salad run this test again is by restarting your PC, as Salad only runs this bandwidth test on startup, and maybe at random every couple of hours.
If you have too many applications set to launch on system startup, this may negatively impact your speed test results. Try disabling some of them - especially ones that use your network, like Steam, Discord, Spotify, your browser, etc.
i was literally about to say the exact same thing 
:)
i compared the librespeed logs between my laptop and desktop
my laptop reported uploads of >20mbps but desktop had barely >6mbps
i also manually ran librespeed-cli.exe and got over 10mbps which is odd
I kept restarting my PC until it got better speeds :)
also librespeed-cli runs right after I log in automatically which is also when my other programs start and use up bandwidth
yep
so librespeed struggles for bandwidth among my other software
it's really dumb
you'd think it would run when you start bandwidth sharing in salad
thinking about using a usb tether from my phone to pc and unplugging ethernet
that way I can try 5G instead of broadband
I will give it a go
nvm it doesn't reach very far into my room
this is a mmwave moment
hue
me when as soon as it goes below 30 for upload mine dont work
giving my pc the blue screen of death made it work
if you restart salad, by manually shuttin down aand reopening will it redo the test
you can delay it by disconnecting ethernet
or turning off wifi before rebooting
then when you connect again it starts
It seems like sgs-client.exe wasn't ever downloaded on my computer (and I've enabled bandwidth sharing for around 1 month now).
Is there any way to fix this issue?
I believe my internet meets the requirements (log screenshot attached).
Have you read through the pinned messages here thoroughly?
I believe I have, (US).
hm
I believe my issue is that sgs-client.exe isn't downloading.
(the folder does not exist, even though I've enabled the option for a month now)
do you have any other hardware enabled? (cpu / gpu)
I have gpu and cpu enabled (container).
Although, GPU mining does not work. It;s enabled but never utilises the GPU itself (RTX 2080). It has the error of "cannot parse json."
oof so you've got two issues that I'm not sure of the solution to
Is there any way I could get the machine_id argument for running it manually without salad automatically starting the workload?
Unfortunately not
what happens if your ip is dog water and you cant change it
sometimes it sucks to suck
Call your ISP
That's really the only "solution"
Make sure you have dynamic IP or something like that enabled on your router
it's only gonna keep getting more and more difficult to get a new IP, as we're running out of IPv4 IPs, so I wouldn't be surprised if they don't allow you to change IP
ipv6 the new norm when
It measures your internet speed.
oh okay thank you
If anyone doesn't mind, can you DM me the bandwidth sharing workload files for the US?
Ah
Then salad isn't touching the folder I manually inserted.
Is there a specific name the folder has to be?
Yeah
What should it be named?
^^
Alright.
do you have dynamic ip
what can we do with this
You can insert it into a folder in your Salad workloads folder.
germany is DE I think
{"level":"error","ts":x,"caller":"ingress/api-client.go:141","msg":"Cannot connect: unexpected HTTP response status: 404","stacktrace":"github.com/SaladTechnologies/sgs/pkg/ingress.ConnectToSGSServer\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/pkg/ingress/api-client.go:141\ngithub.com/SaladTechnologies/sgs/pkg/ingress.ConnectToSGS\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/pkg/ingress/api-client.go:497\nmain.main\n\tC:/Users/ericn/Documents/Projects/salad-gateway-service/go/cmd/sgs-client/main.go:47\nruntime.main\n\tC:/Program Files/Go/src/runtime/proc.go:250"}
This is what I get when trying to use it via CLI.
(assuming my machine Id was in another part of the logs)
which country are you in
US
yes
how
I switched DNS servers, and I'm not getting a 404 anymore.
i don't think running sgs-client.exe works
they ran it with the same arguments that salad ran i'm pretty sure
even then it doesn't work
It at least gives you a response.
I'm not trying to get it to earn balance, but I'm looking for a response.
I used the ID from miniZ (this probably isn't it), but I inputted the other correct arguments.
yeah you would be right, that isn't it
wow
Still doesn't launch sgs 💀
Are we only supposed to have these files in workload-definitions?
Yes
Well, I give up.
I cant get mine to work either
