lhr bypassing ?

[sick elm]

hi, i wonder if there is any bypass or overclocking for lhr ? i have an rtx 3060ti lhr and his hash rate is very low so i see nbmining can bypass this things by is there the same things for mining with salad ?

uh enable elevated permissions

it should bypass it

Enable elevated perms and use this driver: https://www.nvidia.com/Download/driverResults.aspx/188989/en-us/

Enabling elevated perms alone will cause the miner to fail to initialize. It tries to run the unlock, can’t, and promptly gives up

You need the special magic driver

[quaint rune]

!lhr

[weak fulcrum]

------ LHR Guide: --------
You own an LHR GPU (Lite Hash Rate) and wonder how you can maximize earnings on Salad?

This handy dandy guide has you covered, explaining the steps to take to bypass the LHR restrictions:
https://support.salad.com/article/257-how-to-earn-more-with-an-lhr-gpu

Enjoy!

[quaint rune]

this command exists now so we can save time :3

[sick elm]

thanks guys i will try

👍

Do a bit of overclocking and most of those cards can do right around 50mh/s

and non lhr do more than 50 ?

if you bypass lhr and oc a little it will get around 50mh

all 30 series cards are lhr

[sick elm]

ok so after doing oc + bypassing lhr i have this mining rate (rtx 3060ti + ryzen 7 3700x) so is it good ?

dont mine with cpu

gpu more than enough

also thats good for a 3060 ti

1.26 without the cpu

just dont use the cpu man

heats up too much which can cause some damage

[undone shore]

that's a bit of an exaggeration, but yeah CPU mining almost always consumes more money in electricity costs, than what it earns.
I'd only say to CPU mine if you don't mind the additional heat, your electricity is free, and you don't mind being limited to light tasks (As Salad will try to take up as much of your CPU as it can)

[sick elm]

3060 ti? I misread your hardware, I thought you had the non ti

The ti version should do 60-63mh/s

i'm sur i have a ti the exact reference inno3d 3060 ti oc twin x2

I understand, but I initially misread your question

Target 60-63mh/s with your card

ok so what can i do if not