#electronics
1 messages · Page 31 of 1
regardless, the speeds from that to my main wifi in my house is horrendous, sometimes it will just disconnect/stop working and when it is working its slow
as for access points, i dont think i have any in my room and im not exactly into the iodea of running a cable along my house
Does anyone have experience/suggestions for replacing a Samsung galaxy A11 SM-A115U1 screen?
I have a sugestion
My dads screen is cracked up, and he’s getting a new phone and said he’d just give me the broken one.
dont do it
Is it a mess?
The phone is fully functional, just you have to use a keyboard and mouse cause it can’t read touches
How much do you figure they would charge?
yeah id see if samsung would repair
Hm. It might be worth it, then i could have an iPhone and an android. Might play better with Linux.
Samsung is almost as bad as Apple when it comes to self repairs
galaxy A11? sounds like its time for a new phone
After a few months with my tab s7, I have fully ditched my laptop. It's just so much more convenient and the batter genuinely lasts through an entire day at university
Anyone have any recs for the best productivity device around $1000? Looking for laptops or anything of the sort
anyone good with modems?
What about them? And which modem?
been having mad issues its cm1000v2
It's better to chat here instead of DMs in case someone else has insight.
Packet loss and speed issues. Is this a new modem or have you had it for a while?
got it recently because i thought the issue was with the one cox provided
the issues stopped for a while but they are back again and its been a couple weeks and the issues are still present
my channels and what not, i noticed the amount of uncorrectables is high
this is less than 24 hours of uptime on the modem
If you've had these issues with more than one modem, it's probably an issue on the ISP end. Maybe have them send a technician out and they'll figure out what they need to replace.
Odds are there's a bad/corroded cable and they'll need to swap that
see thats the thing
they replaced the lines
i thought it was me being a mean guy but the issue is actually still present
corrected that sorry!
Good catch lol
they replaced lines from my house to the tap, the tech stated my connection was "perfect"
They need to move troubleshooting further down the line then.
I assume you've registered your modem with them as well.
ye
Hi
Can someone help me with the right product / sound card for live streaming
Pls help me to choose the right product/ soundcard to purchase for live streaming. I had a very bad experience with the v8 sound cards
what are you streaming
For xlr interfaces something like a motu m2 or the arturia minifuse might be good as they have loopback channels to record desktop audio. Elgatos interface might be good if you need software or clip guard
Hey guys
What is the best way to get better wifi in my room?
I've had this issue for a while now, ive had 2 of the same netgear extenders in my room which i then plug into my PC via ethernet and those have worked good (or fine enough)
the issue is, both have broken with the second one being super recent
so i got an ac1200 or w/e just to work temporarily and ive had more issues with it, random lag spikes (maybe not even random, its just constant), even when its not spiking its still horrendous
compared to my say 7 ping or w/e i was getting previously, im now averaging like 40-60 excluding lag spikes
so what would be the best way to fix this? i dont have any sort of budget tbh, i just want relatively good wifi in my room.
if it helps, i have fios fiber optic i think, i can get more specifics if needed. The router is 2 floors down in the basement, basically on the opposite side of my house
Extenders suck. You only get half the rated speed and they're almost always low quality.
Maybe powerline ethernet will work better for you.
thanks for the response but ive figured it out
My prime objective is to mix/ record my vocals along with a karaoke accompaniment on a smart phone, and to upload this video file on fb
then you dont need a soundcard
just obs
and a mic
you can stream the karaoke track in the background and ur vocals all off ur pc
Thanks. Let me check
hey does anyone know about why my desktop frezes up so much when Im on the internet?
I was told by a remote tech it was my operating system, and he couldn't fix it so i find this a little hard to believe?
there are many things it can be, in general hard drives for a operating system are very slow and not recommended if you use that. There is a chance you have a download in the background doing funny things, or some kind of virus or crypto miner. you could start by looking in task manager and seeing what it taking up resources
what are good android phones right now?
my mom and grandma both need new ones, 128gb preferable
Budget?
Not a clue, I was looking at waiting for a sale for the pixel 6 for my mom, she's still on a galaxy s9 I believe
My grandma can get by with pretty much anything, just needs 128gb
There's pixel 5s renewed for 310$ on amazon as well
This would be a decent choice
https://www.amazon.com/Samsung-Galaxy-128GB-Verizon-Renewed/dp/B09LG4PSB6
You deserve a phone that delivers leading tech and allows you to express yourself in a way you choose. With bold colour options, pro-grade camera, 120Hz display and all-day intelligent battery that charges up in minutes, the Galaxy S20 FE 5G delivers uncompromised innovation. Capture every moment...
That works for me, I'll ask her opinions later, ty
Are there any major differences between it and the pixel 5 5g?
Uhh been a while since i looked 1 sec
S20 fe has 6gb ram(at least the one i linked, can have 8) vs 8gb, s20 fe has 4500mah vs 4080 for pixel , s20 6.5" screen vs pixel 6"
Cool ty
Np
any radio operators in here?
I have several Baofeng UV-82 radios and they keep having static/interference when we walk by the access points. anyone know hoe to eliminate that interfearance?
Move the antenna out of high traffic area would be my best guess. It doesn't seem like interference so much as signal degradation when a person consisting of mostly liquids passes between the receiver and transmitter.
Or brute force the issue and get a stronger antenna
Anyone familiar/know if the below media converter is compatible with a Lumen internet circuit with "Single Mode fiber with SC connectors"? Need this for work.
No, skytech is bad and that pc is a bad price. ABS has the same specs for $1000-1100
skytech isnt always bad tho. but that case is indeed bad
yes it very much is
they have awful qc, use oem parts in some cases, use terrible parts to lower the costs (mobo and psu)
and have absolutely awful customer service
they gave me a 500w white psu instead of a 600w gold, and wouldnt replace it because "i voided my warranty by opening the pc"
ah lol
terrible company 0/10
That's illegal under US law lol
You can't void warranties unless you can prove opening it caused damage
is the case issue an aesthetic one?
Granted those prices are open box but no oven case and having to deal with skytech
The 40 series? No it's not an option. They won't even be out until late this year. 4060 being mid-tier it probably won't be out until the middle of next year at the earliest.
does anyone have areas on their tablet were your spen will just refuse to work?
or if it does do anything it's like 1 inch above were you are actually writing
I have a Samsung galaxytabs7 plus and using your fingers works just fine but the spen will simply refuse to work
magnets do that
do you have a case with a screen cover that uses small magnets to close it
it uses magnets for a few things. mainly keeping it up while typing as a laptop
I'll take it off and report how it works thx
it'll take a bit for the screen to recover
prolly like a couple of hours away from the magnets
Anyone here got an opinion on the Samsung Galaxy S20 FE?
but also I found an A52 for 325
what option is best?
Oneplus 8
what are the odds to meet a beautiful chick over?
?
🐔
🐓
hello
🐤
Hello
Hello
does anyone know of a decent camera for a decent price? mainly going to take pictures of people and nature?
i was thinking maybe a Canon EOS Rebel T6
rebel series is alright for the pricing. good for people just getting into photography but not super great since the kit lenses that come with them are fairly meh granted theyre suppose to cover most of what youre looking at
even though theyre more expensive, sony cameras are good as well if not better in most aspects
i have a samsung note 4 and i want to update it to the latest version with an SD card
Just go into settings and then go towards the bottom -> update
i di that and it says it's unavailible
i get a screen saying software update is currently unavailable, try again later
Can you send a screenshot?
uuh
if you want a 480p camera
That's fine
Could be the Samsung server is down
there's no way it's been down for a week
Ok I have a surface laptop 1 it randomly blue screened and. Now after restarting it's stuck on the windows logo and there is a hardrive image with something spinning in the corner how do I fix this
Idk if I should ask this here but I got a new graphics card from the shuffle and it all plugged in and everything is working but my monitors are not turning on. What should I do?
New build or GPU into a preexisting build?
New gpu into an existing build
What's the rest of the build?
And just gotta check, Monitor is plugged into GPU, not mobo, right?
One sec. I bought it prebuilt from ibuypower so I don’t know for sure. I did change the ram to 32 gigs of XPG adata and 1 Terabite of storage
Welp, just gotta hope ibp didn't use wacky components
For a prebuilt, PSU might be an issue
Ok
what was the previous gpu?
AMD Radeon RX 550
most likely the psu then
Ok
i doubt that psu is over 350w
I bought a new one today and it’s 750
can you link it?
imo id buy the bitfenix gold 750
ARESGAME 750W Power Supply Semi Modular 80+ Bronze PSU (AGV750) https://www.amazon.com/dp/B08JM12SQ5/ref=cm_sw_r_cp_api_glt_i_HE9GHV9HAXHS6GEQ0BCD?_encoding=UTF8&psc=1
Really? Dang
i still wish i had bought that instead of what i did
same price and 100w more
wouldve given me more room for an upgrade
Dang. I got this one for pretty cheap and hoped for the best
cheaping out on a psu is never a good idea
Yeah. It’s just what I can afford right now
Aresgame is not a good time, iirc they were caught sending handipicked samples to reviewers, faking efficiency rating, and generally not using good components. Example bit on a review of ags750
Anyways, have you been testing with the new PSU or still the old PSU in the prebuilt?
I’ve been using the new one cause the 8 pin on the psu that came with the prebuilt isn’t the right one for the graphics card
As in the PSU that came with the prebuilt only had 6 pin?
No it had the 8 pin but it didn’t fit. The pins were a different shape
I’m not all that smart about computers so I don’t really know what you mean by that
Welp, other than maybe waiting to get a new PSU, not too much to do other than clear cmos and check just in case that helps
The shapes are slightly different between PCIe 8 pin and eps12v 8 pin
Yes it was the eps 12v
I needed the PCIe 8 pin
So it’s not the psu cause I swapped the graphics card with my old one and it worked fine
The scary thing with the keying on those is you can fit the pcie plug into the eps with no resistance
Really? Unfortunate
Problem might be in the PSU delivering power to GPU
Pretty sure the sense pins will save you from catastrophe, assuming the psu knows how to deal with it
But in general, I wouldn't use aresgame psus
thx, I took the cover off and got a diff Cover and it has been working better than ever
Reason: Bad word usage
sorry for the cursing
but to correct myself, i realized building a bunch of electronic projects hasn't been working out
so once i repair that spare switch
i'll call it quits for a while
probably will turn that nuc5ppyb into a kodi machine and the rpi3b into a phone
What kind of cell phone would you guys buy in 2022? I was looking forward to OnePlus 10 but not so sure after the infamous bending test. Don't want iPhone or Samsung.
Interesting
I don't game on my phone but battery size and nice camera is a very big plus
I seen nothing about that but the s22 looks v nice although i understand not liking samsungs OS, I'd maybe have a look at this video
https://youtu.be/IDcyXtweHCw
The Best of Smartphones in 2021!
🏆 Show more for all links/phones 🏆
Discord: http://discord.gg/MKBHD
0:00 Intro
1:25 Best Big Smartphone
3:30 Best Small Smartphone
6:35 Best Camera Phone
9:24 Best Battery
11:34 The Design Award
14:45 The Value Award
16:26 Bust of the Year
18:25 Most Improved Award
20:55 Phone of the Year
Galaxy Z Fold 3 Revie...
Id go pixel 6
I wouldn't, good few complaints of it being buggy
Like most other phones then and who needs 16gb of ram on a phone
btw big battery is meaningless on bad os. I went from a charge lasting me maybe 3/4ths of a day on samsung os to over a day and a half when I switched to pixel os and pixel os wasnt even designed for my phone
I'll have what you're smoking
They get fewer and fewer day by day tbh
Yeah but just a factor
at this point id absolutely recommend a pixel 6
FAir
then whatever else us breating in forcibly through the nose
because u talk like ur high on drugs
Lol
As a pixel 4 owner, I disagree
I assume he's being satire
Pixel 6 is a bit buggy, the rest are great tho
I hope so
Nope..
Growing pains
I don't like iPhones for lack of fingerprint sensor and lack of WebM support
Tensor chips things
Yeah I'm guessing because 1st gen soc
Still cant believe no fingerprint under screen or on power button on iPhone tbh
And now, not even iPhone 14 will have FP sensor
Even though they though about it
Why is Google super bad?
He's referring to Google being big brother?
Source : Trust me bro
proceeds to ignore the rest of the questions 
@shut wolf this question
quite reputable.
every company ever
dang did you just called wikipedia lies
actually fight me
lol are you stuck in 2010
trust me™️
And the new york fricking times lmfao
I hate to break it to you but every news outlet is biased and selective in reporting
Doesn't mean they lie
Google just promotes the ones that pay the most for their ads
I hate to break it to you buddy, but facebook groups are not reliable sources of info, vaccines actually help and 5g towers dont cause cancer
Literally every tech company tracks you, google does not sell your info, that's Facebooks tango, they rent it out basically, what company doesn't want money? Wikipedia posts sources and is community written and fact checked yes it can have mistakes but not lies
That's actually is changing because Huawei got nuked out of the US
trust me bro?
@shut wolf please stop spreading mis information vaccines do work
Trust his mom bro
Pretty sure that’s cause most of the people are vaccinated and covid is still affecting people due to virus strains
Here are numbers straight from the healthcare system in Ireland, 85-95% (can't remember exactly)of people are hospital with covid are unvaccinated
Vaccinated people get covid too sure
Ive personally had it twice
but vaccinated people are also less likely to need hospitalisation
and thats a fact
Vaccines don't stop you from getting anything just helps you from dying
Anyway lets move on
So what kind of phone should I buy
How much are you willing to spend?
I didnt like pixel 5 because it was too small for me, but have they fixed the fingerprint sensor in the 6 now?
500-1000 probably, I'd like something that could potentially last at least a few years
Dollars?
Personally I'd go s22 atm
I’d recommend something from the Samsung lineup cause Samsung is always reliable
I don't like samsungs 🥲
With the 4 year update it’ll last longer
Might be my personal taste but after Samsung pixel is my go to
Pixel is good if camera isn’t that good
Me neither but great phone
oneui garbo
Compared to the pixel 6 pro
Brain stopped responding please ignore what I said
In all the years ive known u i didnt know u had one of those :P
Last time I touched samsungs, the screen was weirdly narrow and long, plus I hated how UI was designed
*fine by me
Which phone was it?
and ur telling a mod to shut up, even tho he has facts to back up what he says and u just have trust me bro mom is nurse
Don't you have some Fox news to watch
- Yes
- Most people do
- Not really
- Yes, already said that
- Every company
- Yes, already said that
If your problem with google boils down to tracking, doesn't apply to how good their phones are, pixel os is great for modification for a focus on privacy, not like Apple that doesn't let you do anything natively
No you are, watch your tone
Like this:
Yeah I don’t agree with you but we’re civil so let’s leave it there
You don't have any facts to show for your arguments.
Actually nevermind you gotta be civil for that
@shut wolf take a look at this
https://youtu.be/dDeba_oqs-o?t=313
Get 20% OFF + Free Shipping at Manscaped with code SOG at https://www.manscaped.com/someordinary
A week ago I covered a device that was sold for $500 dubbed the "Freedom Phone". It seems to me to be a cheap device sold for a massive upmarket price and what I'm here to do is show you that you can do the same and get a better, certified private ...
Oof
This is not a place for discussions like these
Making the most privacy focused phone by starting with a pixel
Is the background image required
no
To be that
thanks falcie ❤️
or pato
idk who banned
I'm watching the video, on a side note - didn't they find the freedom phone being a big bogus lie?
Yeah it was made in china or something
That's hilarious
Yea it was literally bought off AliExpress and being resold for a huge upsale without much modification iirc, that's why muta is making that video
im gonna be honest, the most freedom you can get with phones is building your own or ditching them entirely
im gonna be honest, I gave away most of my freedom already
Freedom? What's that? I vaguely remember something about that when I signed my military paperwork when I was 18. Never seen it since.
Saw some interesting Tektronix psu/dmm/function generator modular combo units at the surplus the other day https://imgur.com/a/jKHwuQZ
Does anyone know the name of the cable that you can use to connect a momentary switch to the power reset pins on your motherboard? I have a video if that isn't specific enough
The front panel connector?
That's what those pins on the board are usually referred to as, and yes you can connect any type of button to the power pins
It's the power reset pins on the motherboard
The cable connects to the power reset pins on one end and connects to the momentary switch
I have a video if that will help
Yeah, that's the front panel header
I've been using my iPhone 6s for several years now and though it still functions, I am starting to look for a replacement especially since 3G networks will be coming offline soon. I am having trouble finding a good option so I thought I'd share my requirements and see what suggestions the community had to offer.
I am interested in switching to an Android or similar iPhone competitor as I haven't seen anything from Apple that seems to suit my needs and I dislike the trend of decreasing user serviceability. The following parameters are in no particular order.
Carrier: My current carrier is Verizon and I would prefer to stick with them.
Form factor: I prefer a more compact phone. Preferably no larger than the iPhone 6s itself. I do not like the trend of phones becoming miniature tablets.
Battery: I want to prioritize high battery life. I do not like having to multiple times daily or feel like I need to carry a charger with me when I go to work. Something that can deliver at least over 24 hours with moderate to heavy use of communications apps or music and podcast playback would be nice.
Security: Good security and privacy protections are preferred. In addition to software protections, hardware kill switches would be nice, but I've only seen those on Linux phones and those aren't well supported enough yet for me to consider as a daily driver.
Durability: Either a rugged phone or something with support from Otterbox or a comparable case manufacturer preferred.
Software: I imagine Android probably has me covered here, but I do use discord, GPS navigation, and listen to podcasts a lot on my phone. I imagine that there are equivalents to the Apple versions of those apps but figured I'd mention the requirement anyway.
Any suggestions and recommendations are appreciated. Thank you for your time.
honestly sounds like you would be the perfect person for the new iphone SE, also otterbox are overpriced af, my 10€ case that i drop all the time has served me just as good or better than otterbox's that belonged to my friends
I’ve heard bad things about the SE’s battery life. Do you have any opinions on that?
It's fine
The iPhone 12 or 13 mini
iphone 13 mini is bigger than 6s
Hi, I have an old Mac internal 50 pin SCSI HD. Is there a SATA adapter cable I can use to access my old data. Newegg said to check here for possible help..... Thanks and happy St. Patty day.
the cheapest way i have seen online is to go SCSI → IDE or IDC → USB or sATA
Thanks for the info! I’ll try that.
the only SCSI adapters i have seen online are the 80pin ones or ones that are $100+
Reason: Duplicated text
@neon sorrel 's message ^
Thanks 🙂
Oh no mee6 is here...
My arch nemesis
Any1 know how I can find out why my computer shuts off out of nowhere while playing games?
Could be overheating
Start with your specs, including exact model if possible. PCPartPicker works great.
Mee6 is everywhere.
Anyone have tips for buying LCD control boards?
im just gonna grab something off ebay with the matching model number
anyone having buying tips for trying to get a raspberry pi (raspberry pi B+ specifically)? they're oos everywhere and ive been waiting for ages..
there is this tracker for raspberry pi stock https://rpilocator.com/ but if you just need a lightweight pc you could browser ebay for client pcs like the dell wyse pcs or the lenovo thinkcentre pcs. You can find some of the dells around 30usd and can install linux on them
Find Raspberry Pi computers in stock with this simple to use web application.
Thanks! I'll def have this open 24/7 now 😂
Sorry for the late reply
hey i have a 2013 chromebook that is experiencing connection issues between the display and mainboard, i wanted to turn the screen into a false window and the rest into a htpc
Connection issues like that are usually a loose or damaged cable.
What do you mean by false window?
HI Folks, Newbie here so if I a in the wrong forum feel free to redirected me. I am simply trying to find a Samsung tablet..... 8" 0r 10" that is compatible with a Verizon LTE SIM card. i.e. CDMA support. Can anyone point me to a compatible device. Does not have the be the latest model, cheapest price is key.
have you not seen diy perks’ channel
matt on that channel is known for recycling old broken tech and repurposing parts
you get the led and attach it to a wall
to make it look like a window
hey i'm building a spare gbc
a what
game boy color
i ordered a motherboard on ebay dot com
and have the shell, buttons, screen, etc
just need a front light for the cheap build
Order an expensive Network Switch online. The outer shipping box was in such a state that you could have stolen the switch from inside and put something else inside to make the weight up without it being obvious. 🤦
Thanks UPS 🤦
What's good wattage 55W (165W Peak) RMS or 60W (180W peak) RMS for my amp?
I have a 550W high amp.
This is car audio.
I do have two Memphis 6x9s in the back tho so technically it's a total of 4 high-mid speakers.
6x9s in the back two 6-1/2s in the front.
I'm totally guessing we have some car audio files here but I could be wrong. I only know enough but I'm not an expert on car audio.
Oh cool this exists.
I’m working on building a 3-point infrared LED tracker, and I have no idea what resistors to use for these IR LED’s. also not 100% sure on what the circuit should look like, so I can definitely use help defining that.
Here’s the spec sheet: http://www.solidlite.com/download/DataBook/AL1411A-YIR-100mA.pdf
Feel free to dm/ping me with answers.
help my nvidia high def sound is working with my monitor speakers but not with my actually speaker how can i fix this there is no sound i updated drivers clean install also its unmuted and i made sure all of the properties were good
it was working before when i had my gtx 460 and when i got my 3060 and updated drivers and pluged my speaker (3.5mm audio jack) there is no sound but when i unplug and use nvidia high def audio there is sound coming from monitors spaekers but there is sno sound coming from speaker when i plug into monitor 3.5mm jack
do you still need help
im not sure what your asking
if youre looking for replacement speakers, you should pull up your amps datasheet to see how much power it can theoretically provide to each channel
assuming its a 4 channel amp
550w peak
yes
so whats the rms rating per channel, and at what resistance
1 channel front 1 back
its not left and right?
i can fiund out
it should be left and right
and if you are trying to drive 4 speakers you could put two in series/parallel off each channel, depending on the speakers themselves
but that would be tough, because the front and rear ones are completely different
and also it would require lots of additional cabling
That's the high amp
This is the sub amp.
those are both sub amps
although the first one can also be used for woofers and tweeters
i wouldnt recommend it
I use the power Acoustic one for the highs
It's only powering two 6x9s & two 6.5s
The class D is for the big boy
bruh it look like a gun safe
All of my equipment is old stuff
From when my brother was my age
My brothers 35 now and I'm 20.
sorry its just so corny
That 12" is like 15 years old.
Still works
But yeah both those amps are old as well.
That's why they're both discontinued
So one of my 6.5s in my driver's side door is like slowly dieing every day it's either crackling or not playing right or going out then playing. Just weird issues.
So I'm thinking about these Kappas to replace them, not looking to spend a fortune anyway.
The speakers that are in the doors now are Memphis 6.5s
ahh
speakers are fine
how are your current speakers wired up?
like imo i would just get a proper 4 channel amp
how would i feed asetto corsa data into a audrino uno?
is that a game?
depends on the data
i doubt youre gonna be able to pull straight from system memory, for all sorts of reasons, so your only option would be to collect data from off the screen itself
you would either have to do that using custom software, or possible look for something online? kinda doubt the latter though
you can communicate with an arduino uno as a serial device over usb, so actually getting whatever data you want to the device wouldnt be hard
actually getting the data, however, is probably gonna be a pain
inb4 rowhammer attack
Assetto corsa is a racing game
You can like make it display info like rpm, speed and which gear you're in
Not sure if it's possible with arduino
But people have done pi
A sneak preview of my Assetto Corsa Arduino Dashboard project
I recently published a C# library that I wrote to easily access the shared memory API in Assetto Corsa over at GitHub:
https://github.com/mdjarv/assettocorsasharedmemory
I have been using this library to create an Arduino dashboard using an Arduino Uno with an LCD Shield that displ...
yep it's possible
That's kinda cool
hey i realized it might be time consuming as heck but i can make my own tamagotchi v-pet from scratch with stuff i have lying around
the challenge is not to order any new components for this
just harvest everything from old pc pcbs and create new traces after cleaning the existing ones
i got a question about the rode podmic what is the cheapest audio interface that works with it
because im trying to get a dynamic mic with noise suppression to work on my laptop
Cheapest would be m track solo or go with focusrite scarlett 2i2
help
this is my dads PC, it worked fine the other day but now ive put in a new graphics card and it won't boot on the old card or new
im slightly worried
just wait for windows to do auto repair
it's booting
but windows is just thinking something is corrupted
it was crashing, or freezing even on thw auto repair
was the memory sticks, i put in old ones and it works fine
Ah. maybe the motherboard didn’t support the ram
Holy, We really do be living in a pro-disposable world
I still plan to do DIY hardwire when I get a home cuz it cheap, but I guess I also get added benefit of mostly knowing what's with with my stuff.
Just have to spend the time to make sure it is all done right
I am a Pianist and my Piano has a USB to midi port (USB B). I need to send the midi data to two devices simultaneously as below:
1-LED visualizer (takes USB input from midi and lights up led's based on midi data)
2-Laptop running DAW for recording midi, generating sounds with a VST
I have not been successful in splitting the midi signal from my piano to feed into those two devices. Any inputs/ suggestions will be super helpful.
hey, my dad gave me an older optical drive for his now-sold bmw
could it it be harvested for standard electronic parts
or do cars use weird formats
its a dvd drive that looks like an arcade board chassis
Pics? Model numbers?
ccc vorledan
is the name
i have to look at it further
but looks like a sound system thing
with a dvd drive
typically you could use something like a midi through box like this https://www.sweetwater.com/store/detail/MIDIthru4--midi-solutions-multivoltage-quadra-thru-1-in-4-out-midi-through-box to split the signal or you would do a chain through all devices since they usually have 1 in and 1 out at least. you should also be able to do it through software but either way you might have to research a bit more how midi works and how to setup in a daw. making sure the master and slaves and clocking is all setup right
Thank you so much for the information! 🙏
@neon girder
Thank you
Hello! I recently bought a replacement battery for my Asus Q551LN laptop. When I went to replace the battery, the connector on my laptop broke off into 4 pieces. Asus won't provide the connector part number or a location to purchase the part as they want me to mail it in to get it fixed, however, I'm adept at surface mount soldering and would like to fix it myself.
Would anyone happen to know the part number or how to find which connector to use? I tried linking the actual battery, but I got a message that I couldn't post a link.
Battery https://www.newegg.com/p/16J-014W-003E2
Connector https://youtu.be/0hV05M3brCI?t=436
Grabbed your links back for you 😉
Need a repair? Visit our repair shop if you are local or mail in your device using the mail-in form at http://northridgefix.com/mail-in/
Have a question and need an answer ?.
http://northridgefix.com/askus/
Consider donating if our videos helped you out in anyway. it takes a lot of time and effort to create the content.
http://paypal.me/Nor...
Hi my phone won’t connect to some websites and some apps on my “access point” router… not sure if this is the right place to ask but does anyone know why this is happening/ how to fix? thanks
Search engines seem to have no problem but apps like discord, reddit, and instagram don’t load any content
- everything used to work fine before so i’m not sure what changed
Have you rebooted your router and updated its firmware? When was the last time it updated if it's automatic?
That's all acting a lot like firewall rules or misbehaving UPnP
I have rebooted way too many times and the firmware has no updates available
I haven’t looked through the firewall yet but on the main router it says “low security”
Maybe xfinity is part of the problem here
I'd do a factory reset next then. If you still have issues then it's probably on Comcast's end.
You can also try using a VPN and see if you can access those things through that.
@calm mural
my fightstick has its last hurdle: my power supply for it was an unofficial b00tleg
the low 🅱️oltage warning
so i ordered the canakit one
Who is sprinkle boy they are copying Cameron’s pfp?
lmao
SakuraClub mobile phone radiator cooler, Machine size: 7.55x3.65x1.97cm, Product package size: 13.5x9.7x3.7cm, Product weight: 148g (including package), Package list: radiator / power cord / instruction manual, Material: ABS aluminum alloy ceramic, Power supply: 5V, Notice for Customers: 1. This ...
sprinkleboy#9158 IS Cameron
Sometimes Discord lags a bit and shows the account name and not the display name
No it’s not 
LOL
Ye it’s my doppelgänger
would this be good for cleaning out dust in my computer / ps3
looks pretty pricey tbh
ty guys yea its in aud so it might look a bit higher just want to make sure it wont damage my pc
ahhhh
thats VERY important to mention
for future reference send link
over screenshot
@tacit loom
https://www.amazon.com.au/Compressed-Keyboard-Generation-Portable-Electric/dp/B098T5WMMK
This should do well
The only way you'll damage something is if you let the fans overspin. Just hold it when you blow on them.
: D
i’m finally finished with my fightstick!!
it’s done now that i added a salvaged fan on it
W
SIN SHINE - Compressed Air 3.0- Multi-Use Electric Air Duster for Cleaning Dust, Hairs, Crumbs, Scraps for Laptop, Computer, Replaces Compressed Air Cans (AD01-Black) https://www.amazon.com/dp/B083LNC6NR/ref=cm_sw_r_apan_i_Q5KVTQWCS2N64VG98BMW?_encoding=UTF8&psc=1
I use this
Depends on the fans imo.
I've seen some fans that take the excess spin with no problem and other that start making whining noises when you turn them back on.
I guess a safe bet is to not let them spin.
Depends on what bearing they have
I usually tape or put a paper clip in them to hold them still.
okay now im finished with the fightstick
after mickey mousing an led strip by connecting it without soldering anything
i even made a gpio jumper
why tho
just buy an adapter?
like whats your purpose in all of this... theres nothing to really convert. its all usb
thats like the first result on ebay
To learn, ik I can buy one, I just want to try learning something new
dont waste your time with something like that tho
do something interesting that gives you a satisfying result
build a mini keyboard or something
or that
but if you want something more PCB-able, there are many more interesting things that you can do to learn
also imo, start working with microcontrollers
then go from there, dont start right off with ICs on a custom board
arduinos can be had for dollars
@eager bison
So my highs in the front the 6.5s are wired with a high pass filter that splits the signal into high pass and low pass.
It has 4 wires 2 for the high pass end and 2 for the low pass end.
Each speaker has a high pass filter and the speakers have connections on them for both the high pass lines and the low pass lines total of 4 wires plug into the speakers.
My new Infinity speakers only have a spot for 2 wires. So what should I do completely remove the high pass filters?
depends on the frequency range of the new speakers
it sounds like your current 6.5s are a component system consisting of a tweeter and a woofer
so they have a filter designed for the specific frequency ranges of those two components
if your new speakers only have two wires, then its either only a single speaker, or is a two way component system and has an internal filter
thats a two way for sure
how much did you pay for those?
also yeah they def have an internal filter
also those are 3 ohm, make sure your amp can handle em properly
That either means they're really good speakers or really bad.
theyre for sure really good
That's what I was saying when the amps possible a bottle neck for the speakers and not the other way around you know...
check the data sheet, make sure the amp will do 2 ohm speakers
and see the output rms at that resistance
if its limited to 4 ohm, it might sound like garbo
well it might destroy the speakers
@eager bison
It's 2
Just checked
The amp has two knobs one for HPF and one for LPF on the highs.
I have no idea where to tune those to do I just have them in the middle atm.
this amp only drives the new 6.5s, right?
in that case, you wanna use the HPF
and turn it to 45
or around there
there should be switches or a switch that enables one or the other, or disables both
yo i need help deciding between two different ssd thingies
Which ones?
w
@kindred yacht it would work with this motherboard correct?
Yes
cooliio
That's expensive for a P31
Yeah it's in HPF mode right now.
It already drives two Memphis 6.5s and two Memphis 6x9s
Only thing being upgraded is the 6.5s
$100?
109 is kinda high, they've been 103 or < $100 before
well i mean lik 10 dollars though
yeah, it's fine, great drive
110$ is good I'd say, lowest I saw was 95$, old normal price was 130$
Hello, just wanted to see what are your thoughts on Razer Blade 15 laptops?
i actually got the arcade box working
the only thing to do now is get a replacement cable meant for the first two playstations and another for gc/wii to plug into my fighting board
We are moving, and when we switch out internet provider, they can give us a static IP address for $5 extra a month. I am going to be running a server with openmediavault on it, and accessing it remotely. And maybe a self hosted vpn a little later. Is a static ip worth it?
eh you probably don't need it, dynamic ips don't change often unless maybe you lose power. if you have a domain you can set a dynamic dns in router settings possible
can someone hlep me with m.2 setup?
NO!!!!
moose helped
plug it in and screw it in. might have to format it in Disk Management (right click on the drive and click on New Simple Volume and go through the steps)
ye moose helped earlier but thankls
YES!!
@eager bison So 40 is the lowest possible HPF setting on this amp
It goes all the way up to 250
Well they're not installed yet
But yeah I gotcha
Since the new speakers do 40Hz and up.
I feel like 250Hz is low for a sub
its not for a sub, its for the 2 way component speakers
regardless, most lpfs dont go much higher than that
i think mine goes to 300hz
good enough, considering my subs tend to roll off well before then
vid or ur lying
is logitech z200 a good budget speaker ?
Yes
I loved mine while i had them for about a year but i gifted them to a friend because they really needed speakers
@eager bison My dad trying to tell me that the speakers don't get wired directly to the wires when they do.
He's saying you have to connect the prongs to the screws then you connect the prongs to the terminals.
But in the speaker manual they legit show you connect the wires to the screws and tighten the screws down to secure it.
honestly you can do it however you want as long as its wired up correctly
i just ran a wire and tightened it right down to the amp
See
I'm gonna connect the wire right to the speaker.
Because that's what it's made for.
yeah just jam the wire in there and tighten it right down
No clue what my dad was talking about
I think maybe he thinks I have speakers with a terminal end.
did the speakers come with anything else for wiring?
Nope
then theyre designed to take the bare wire
Just adapters to screw them down with.
And screws
It's legit in the manual
Imma install them like this and if he says anything Imma pull out the manual.

I understand basic electrical I'm a Techie c'mon now.
Thank you
they look cool too
are those tweeters?
cant be subs
for car?
ill show you mine later
when I get to my car
I wonder why Verizon phones are down for 25000+ people right now
who even uses verizon
People who are in bad service areas because they tend to have stronger signal
I'm in so cal. Orange county.
i only visit for like a week at a time and head over to san jose
Lol
I have 2 networks on my router, one has 5g at the end, i made sure the one with 5g was connected (on my phone) and I made sure Wi-Fi calling was enabled on my device, I was able to get a call out to someone.
Practicing my crimping before I wire these speakers up.
@eager bison Thinking Imma have to use blue crimps
Red seems way to small.
Gonna run 16awg
Pretty sure that's what's wired up now.
Just bite em
So
Turns out reds have a much tighter fit on the wires.
Which is good for connection.
So I will be using reds.
will you be using it for a PS4/5?
No
@eager bison One done
One more to go
All 4 screws didn't line up and I don't have anything to drill into to make a hole.
So 2 screws should be more than fine.
It's tight tight
I can't tell for sure yet but I tested it to make sure the connection was good and it sounds insane
Time to spend another 2 hours on the other side
Things sound great.
I haven't even pushed it yet.
EDIT: Nvm
I know right?
EDIT: Nvm
Actually you know what, the day I ask for help, the day I think I found one that's thin enough to swap. 
Went and looked again and I think I finally found one after weeks
I think I'll be good now

Smarter Shopping, Better Living! Aliexpress.com
picked this up to put in my car
looks like it'll be a fun little thing to tinker with
my nintendo switch running linux works great for desk work at a cafe
Insta360 one x2 + GoPro hero 10 or insta 360 one RS or GoPro max
Anyone have any recommendations for 34” ultrawides?
What country?
Also i wouldn't recommend pushing a 34" ultra wide with a 2070 super
Was there a good device to replace cans of air?
I mean there are always compressors if you often have a need to inflate or clean things I guess
the only thing I really need is just to dust the pc, but cans of air are crazy expensive.
my kb could use a dust off every day too
I know someone had posted something before, but I can't remember what it was.
electronic air duster?
there are some cheap electric blowers but they haven't been powerful enough in my experience. Some time ago I actually had a canister that you would hand pump to compress air inside and a trigger release nozzle xD no idea what it was called
oh jeeze lol
My handheld electric duster is strong enough that if I hold it right it spins in circles
Yeah, datavacs work well, but maybe you can find one of similar power/quality for less
Can someone send laptops preferably 400$ or lower that’s good enough for simple work, like YouTube and maybe 3 or more tabs open at a time
Can be open box or refurbished just need it to work lol
Thank you
careful with Lenovo laptops though. I have one that I bought about a year or two years ago and they still haven't updated drivers for this laptop since December 29, 2020
hey guys
i managed to build a phone with my raspberry pi
i just need to take care of business with a gsm module and remove the gpio pins because theyre bent on arrival
ELECTROCINSXS8!
any of those are a good option
note that razer synapse 3 and corsair iCUE suck absolute balls. terrible software
outside of that, pick one you think you would like the shape of, theyre all good wireless mouse with removable cables
thanks homie
Depending on your budget, Logitech g pro super light
I would check out this sub https://www.reddit.com/r/MouseReview/comments/r4usr6/your_personal_top_3_mice_of_2021/
Why have 3090s price dropped like a rock?
Lenovo drivers are so bad
they're outdated
Yep
every time I reinstall the drivers Lenovo provides, Windows gives me an updated version
GPU shortage is loosening up and 3090 ti is out now
Question. What would be the best smart doorbell with a camera option. I’ve been looking but dunno. Was looking at an Arlo one but also Ring but dunno.
Would prefer wired.
I used to install smart home systems. All the doorbells are kinda the same level of crap imo. Like, 30 seconds+ delay between the doorbell being rung and you getting a notification kind of crap.
Yeah I was reading about that and afraid of that. Any decent ones that you could recommend that are decent enough?
Or what would you do
Arlo I'd consider acceptable for most people while not being too pricy
Ring is... ring. Basically a meme.
Make your home a smart home with Arlo's wired ring doorbell with camera. See a person from head to toe or a package on the ground with 180-degree view. Get a clearer picture with detailed HD with HDR video ensuring you can see even in low light or bright conditions. Connects directly to Wi-Fi wit...
So like this one?
Yep
Ah.
Make sure it has VERY strong wifi signal to avoid notification delays. I used to install repeaters just for the doorbell lol.
5GHz has weaker signal, and it'll be going through a wall
Yeah true then maybe the 2.4ghz
Standard 2.4GHz at 300Mb is plenty for a single camera, even HD and HDR
300Mb connection to the router
Which in the real world through a wall is probably 100-150Mb signal
I’m still slightly confused. What do you mean by mb signal
Like the actual up/down speeds?
Or latency
No, there's a max signal speed negotiated between the router and device depending on signal strength and other factors
So let's say you have a 1Gb download speed
But you're far from the router and only get a 200Mb connection
Your actual speed will be lower than that even, and will fluctuate a lot
Yeah that makes sense...
My current internet plan is only 50mb down and 5 up
I bet I’ll be running into bandwidth issues
5... up...
You're going to be getting some serious delay on video recording yeah
Seems right, it'll have extra antennae to accomplish that on 2.4
Yep has 4
The external ones are usually the 5GHz ones, the 2.4GHz are usually internal
What would you recommend that I really would need for upload for that arlo doorbell. I’m guessing it really only needs maybe 10 upload at full speed 1080p or something
The official spec lists 3Mb as the minimum spec, more is better for higher quality and reduced latency
Yeah makes sense... I don’t think the isps around here offer very high upload.
Yep that was me too, being forced to use xfinity and their ancient cabling/speeds. The highest speed they would give me is 600/15 for $250 a month.
Which sounds like a speed tier from 10 years ago
So now I use the t-mobile 5G and I get about 600/150 for $50
Oh cool. The main isp around here is working on doing fiber with symmetrical up down
With 10g
That's what xfinity told me 5 years ago
Lol
I’ve actually seen them laying some fiber around here so I wouldn’t doubt.
Near residential area
Yeah well I saw them laying fiber at my complex too, I even asked their engineers doing it. Yep, it was 100Gb fiber they were laying. But no, I still have to use coax.
Ah
Maybe one day
But I’ll definitely look into that arlo one more because my mom really wanted to get one for our new house we are moving to.
Ah here we go. On the 1gb down plan here it has an upload of 35
Which is more than enough
$50 a month tho (then probably $100 after the first year lmao)
But anyways thanks @kindred yacht !
anyone know any like good CD players? mainly smaller ones. doesn’t have to be portable but i don’t want some big giant boom box size thing
bro living in the 1990s
lol
me..?
yes lol
what
i like cds 😭
it’s more of a at home collection thing for fun than a use everyday thing
there are cheap USB DVD drives. DVD drives can play CDs
ye
Recently upgraded to android 12 on my OnePlus 8T, my sony xb900n keep defaulting to LDAC codec even if i set aptx hd in developer settings, it overrides that setting, any idea how i can change this? In A11 i could choose it on a per device basis but not a thing in A12
think sony has an app that allows you to force a codec when specific headphones are connected
hm
Well yes but no, the options are prioritise audio quality ie LDAC or signal quality ie SBC
And all it does is change the codec setting in developer settings afaik
ldac be better than aptx hd anyway tho
quality wise
Yeah not connection wise tho, aptx hd sounds the same but better connection, especially noticing it in the airport, assuming cuz the crowding
yes that is what it does kinda
Ahh makes sense
ther e could be a wasy using something like tasker but im not completely sure
Mhm, imma try uninstall the sony app incase it was doing the overriding
Ive been telling him to for a while he just says no smh
Indeed
one of my irl frens encrypted his oneplus after i rooted and put on a custom os for him and now twrp cant read folders lmfao
it broke magisk
Cba, mainly because i like oxygen os mainly, but also i cant have rooted phone, have a token 2fa code thing that won't work on rooted phones for the internship
There's a "hide root" option that usually works
not anymore the functionality has been removedd from magisk itself, but a module exists that does the same thing
Hmm, must have been in the last couple years
Eh it's a pain to setup the 2fa thing anyway
Already had to do it like 3x because of my data loss issue that they couldn't fix the first time
last few months
Data as in 4g not actual data*
Wow that recent? No wonder I didn't know lol
https://github.com/topjohnwu/Magisk/releases/tag/v24.0
Yep it was this release. January this year
You could get a hardware 2fa key and put the tokens on it
its an app that is requires afaik
a specific 2fa app?
yeah
Yeah SecurID by RSA
How much do these dell wyse 3040 sell for (2gb ram & 8gb rom)
(Used but practically new)
I have a few of them and I just need one
They usually go around 30-50usd
Bruh
I mean... I only found one from wish at 70$, how can it be 30-50?
Ill try selling it at 120
My phone. Can anyone top this? Lol
About to restart phone now so that's my record lol
I was starting to experience some serious lag last night/today. all good now after a restart 😛
I think my ipad was at like 1300 idle hours or something lmao
kinda want a Dell Wyse for a NAS and maybe Plex but idk if they’re good enough for that
Maybe but Plex it would only be able to do direct, no transcoding
Its basically rasp pi perf, if you can find one for ~30usd you can give it a shot
darn I need transcoding :/
My pc sometimes freezes but I can still move my mouse and abd hear audio but nothing opens and the screen is frozen except the mouse and audio
Sounds like the GPU or driver is crashing. If you have an overclock set it back to stock. Use DDU to wipe the drivers out and then reinstall.
and you’ll never hear from him again
death
fr
hey i am building a tamagotchi soon
its using a gbc case and a gbc control board from glitchdgaming
but i'm trying to decide whether i want an arduino or pi zero for it
pi 0 way more powerful
to the point where you should already know which would be best for this application
atmega vs arm cores? huge difference
what am i smo-
thing is my device would prefer weaker power
and pis are rare
but i guess the pi can use the controller
holy cow raspberry pis are expensive now
I got mine like last year for $100 for the 8gb variant
There's this thing going on we call a chip shortage
You got yours before it depleted all the inventory of pis
true
I know some people have been getting used thin clients and installing linux on them since cheaper
i literally went to a more application specific board for my car thing instead of using a pi 0 because i literally just couldnt get one
ended up being the better option anyway, so ig it worked out
but fr hardly any 02ws
bruhhhhh
its literally been a month
imagine arduinos going bye bye next
https://alojzjakob.github.io/Tamaguino/ this was the project i wanted to work on
but i'm putting it in a gbc chassis
and i have a gbc control board inside too
Hi guys I boutght a Logitech g shifter today but is it possible to convert the serial port to usb if it isn’t I made a really stupid buy does anybody have any knowledge?
AYANEO2 to feature RDNA2 graphics, just as powerful as GeForce GTX 1050 Ti The Chinese company has just announced its newest gaming console, featuring AMD’s latest Ryzen 6000U “Rembrandt” APU with Zen3+ and RDNA2 architectures. AYANEO2 with AMD Ryzen 7 6800U APU, Source: AYANEO The Ryzen 7 6800U is the newest AMD processor for thin […]
This things gonna be like 1500$
Dunno why they think people need 8 cores in a handheld like this.
Get a quad or six core. Those are plenty. Save us some money.
Also tbh, they should have smaller options than 512gbs for budgeting
https://www.amazon.com/Cable-Matters-Serial-Adapter-RS232/dp/B00J4N9T9C
Luckily USB stands for Universal Serial Bus so a simple adapter cable like this will work, no conversion or drivers required except what the device needs
the thing is that the igp gets weaker the lower you go down the lineup
so yeah
it's a shame really
The IGPU in the 5600g could be overclocked for similar gaming performance as the 5700g.
I'm sure if They asked they could get a custom Apu made, like a 6600u with the 680m
Ayaneo is the largest handheld PC company. Ahead of GPD, Valve, and OneXplayer
the market for handhelds like that in the US is just nearly non-existent
I want the Anbernic Win600 when it comes out even though they'll have an Athalon APU 😂
they are thinking 3250e
which can play "oldrim" at 60fps 720p medium settings.
old rim is the og skyrim. btw
its Windows 10 or Steam OS which is kind of pog
the only issue I have with what they've shown is the left thumbstick is too low
I like the Steam Deck placements.
OH
3020e is the low end rumor.
3050u is the high end rumor.
They can emulate older consoles and play some modern games.
some smart ass decided to make the spi pins effing tiny and i hate them for it
for context, thats my pinky, which is already quite small to begin with
Fingers crossed those pins aren't bridged with solder
i used a multimeter to test it
That looks so jank
I love it
it is, but it isnt
its the official CSR spi interface
digikey has em for like 250
ebay has em for 25 lol
this is the worst of it lol
god forbid Qualcomm offer driver downloads to non-certified people
getting somewhere, this little thing sounds pretty damn good, ig thats bluetooth 5 for ya
sounds better than my phones internal dac
better for working on small things
Among other things.
ayo wym by that
