#electronics
1 messages · Page 25 of 1
Actually, for under 200$, this might be a bit better of an option.
https://store.amplifi.com/products/amplifi-instant-system
is it possible to connect my bluetooth headphones and my bluetooth controller on my phone at the same time?
It depends on your phone, but according to Bluetooth spec multi pairing is supported on BT4.1+, while multiple simultaneous connections started being supported on devices with BT5.0+
i have a redmi 9s with some lenovo bluetooth 5.0 headphones and a oem blustooth ps4 controller
aight lemme look it up if that phone has that bluetoot fal'cie said
@red orbit
it's bt 5.0
It's more a question of it the operating system supports it, Bluetooth spec is more of a guideline when it comes to feature implementations
hmmm
Good news though, it seems the Xiaomi devices 4 years old or newer support it
try to do it ig
I don't see any reason for it to not work at least
aight
my phone's an oppo f3 that is slow af in terms of loading sites
I will say this also, using the PS4 controller over BT connection will have some latency. I use mine wired because it gets annoying.
how much worse is the latency tho?
i wanna destroy both of my gadgets 
lol
50-150ms depending on hardware/software
on wired how much less tho?
Nearly 0 latency wired
It's more down to what you're playing anyway, if you're just doing pokemon emulation or something latency doesn't matter
btw 120 or less input lag isn't that noticeable on mobile
im gonna be playing like some pubg mobile other shooters and other games (most likely rpg)
Yeah not super noticeable usually but I use my tablet with Steam Link so any amount of latency I can cut out I will
200 or more is like as fast as your actual response time
I was having a hard time even playing undertale with the controller on wireless lol, had to start predicting movements more
philippines' internet is so bad so yea ik what's good ping and what's not coz i jump from good to bad in a matter of seconds 
200+ms when in battle and 50ms when dead 
it's an online competitive game and ping is the main reasons why i'm ragequitting and yeeting my phone 
KEKW i once threw my phone to the ground cuz it was lagging so much on headball 2😂
its ded now
got a new one
i yeeted my phone it almost gone to the water 
how🤣🤣
mobile moba is pure cancer, so as the internet connection here in our country
i remember i played lots of mobile mobas like mobile legends. I almost got to mythic once
community was trash tho
at least in wild rift only the game and the community is trash
typical moba lol
haha yeah
My first REAL phone was a motorola flip phone. I was literally trying to break that thing and it would not die. I'd throw it on the ground, rebound it off the wall, catch it, and then send a text. My friends thought I was crazy, but I wanted a new one anyway 😂
The damned thing is still living, I just need to charge it.
it's the saltiest game genre
when i play wild rift(which i rarely play) i just mute whoever is being toxic and try to have a good time
kek
yeah 😂
i was trying to climb and mod a wild rift community discord
and when i started getting mad i just stopped playing fot a bit
my phone didn't made it in the open beta release
oh aight
was able to play it on closed beta release just fine
nice
na?
i wanted to play wild rift for so long but thought it wasnt released
and then i noticed the install button on google play KEK
it hasn't been fully released yet

EU
owh ok
lol
sea server suffered alot
wdym?
so yea when it got to NA it's not as bad as the other earlier server openings
true
it's still on beta, so the gam is kinda wonky at that itme
and less champs
my pc was running league over a year now on na and the ping was 
true
till they release them, its unfinished
yep
but i dont think its that hard
no wr on india even till now
no
what do they do then?
they from pc
was their first time doing mobile games (at least for the active riot staff on twitter)
so they ask alot on the community
that's waht mlbb does even now
its gonna be rough for them then 
yeap
LOL
mlbb just combined abilities and boom new hero
🤣
the first ones that got to the closed beta were the filipino streamers & pro players (from mlbb and aov and league)
semi-serious question: how much of a fire hazard is a bare laptop motherboard bolted to an MDF board?
it's got a CPU cooler decently "mounted" and a very small heatsink for the SATA controller chip as it gets really hot without it
want to run it as a server since it has a very low wattage but I'd rather it not catch fire
It's not
You won't burn the wood if that's what you're asking
I want to build a case for it but I don't have the tools required so I'm considering just leaving it on a shelf
Even 100C won't burn it
Could a problem on the mobo cause it to start a small fire, which catches on the MDF which then catches on the wood floor?
No
okay, thanks :)
Let's have a little fun blowing up resistors, electrolytic capacitors and transistors. Check out my website http://www.afrotechmods.com for more videos about electronics!
The music is the final part of Tchaikovsky's 1812 overture.

@dusty dagger it's a netgear nighthawk ac1900
Connected to whatever modem my ISP gave me
Ok, have you gone into the control pannel. This is usually found by typing "192.168.1.1" into your browser and logging in with the info on the side of the router.
Trying that now. I did follow 192.168.100.1 and got to a status page, is that the same?
Checking the address you gave now btw
Possibly. Netgear routers are usually 192.168.1.1 or 192.168.0.1
I did try to use their app when I did the reset, but it wasn't working, hopefully this sorts it
My netgear modem has the same address...
They should all be 192.168.1.1 just local IPs
Was able to get their genie and going through with all that now
Perfect, most likley you just didn't ever set the router up. Once you login for the 1st time most routers should ask you to set it up. If it doesn't watch a video on how to setup your specific router.
Ok, so I installed their genie app and set up the network. It claims internet access is good but I can't open a page
Well I got this router in 2018 and now vaguely remember doing all this. It stopped working suddenly a few hours ago 😬
Weird. My home network is a mix of things haven't used a 3 in 1 combo for a long time.
I'd try holding the red button on the back of the router that's most likley the best idea.
Sorry I realize I gave you incomplete info. So on my pc the genie app will run a speed test, and but it won't open webpages. On my phone it will let me sign in but then it tries to open a second sign in page and it says "webpage not available empty response" and it was trying to go to some google page
I did a factory reset using the red button on the back earlier fwiw
Weird. I'd have to look further into the router. YouTube might be a good place to look at a setup guide.
I'll look more into it in the morning
Ok, thanks. I'll try another factory reset and give the setup another go with the method you suggested
@dusty dagger second factory reset did the trick for some reason. Wifi and the wired connection are working. Thanks for helping out tonight!
Weird. Oh well, glad I could assist
As long as it works right? 😄
Exactly
My Uninterruptible Power Supply (UPS) started to make some bad noises like knocking sounds and then my computer turned off and a ton of smoke started to come out of the UPS. I don’t dare use it again but I need a new UPS soon can someone recommend a good one?
How many watts is your PC?
I had help building it and I dont remember how can I check?
Overview of basic components? GPU and CPU?
sec let me find it
CPU is AMD Ryzen 9 3900X 12-core GPU is EVGA GeForce RTX 2080 sorry it took me so long
No worries, I can use that
This one should do you, rated at 600W power draw which will cover your PC under load. https://www.amazon.com/CyberPower-CP1000AVRLCD-Intelligent-Outlets-Mini-Tower/dp/B000QZ3UG0/ref=sr_1_4?dchild=1&keywords=1000va+ups&qid=1617254770&s=electronics&sr=1-4
thanks so much Masashi
YW
i've got three options currently for an upgrade, the oneplus 8, iphone se2, and the s10e, which should i spend my mother's money on and why? i don't really care about camera quality, i prefer screen quality and battery life over most features
Don't bother with OP8 unless it's on sale
S20 FE?
Like those are older midrangers, there are some better ones now in that price point
SE 2 seems the most value worthy
Why not 8t or 9?
Nvm just read
If you're in college, oneplus has a student discount, it let me get my 8t for €500 instead of 620 i think
Want to use a USB jump drive that has old radio shows audio files and play this audio through an older stereo that has RCA audio inputs. I know I can use a media player to accomplish this. The big question is how do I navigate the audio files ? Do they make media players that have some sort of small screen for navigating audio files on a flash drive? Would appreciate any help. Thanks
Just file explorer?
Let’s say that hypothetically I need to cover 4k sq ft (370 sq m) with strong wifi
Would mesh be worth it?
Ok
How many nodes will I probably need?
Looking probably in the ballpark of 3
Oh dang that’s way off
Nvm
idk tbh
Do y’all have any particular recommendations for mesh?
I hear the words “Orbi” “Nest” and “Eero” being thrown around a lot
@autumn canyon amplifi
Maybe a USB/SD card media player and a 7 inch monitor from Amazon
You can also find those media players on Newegg, I don't see any 7 inch monitors on there though
The media player is a little square thing with ports for a usb drive, sd card, hdmi and 3.5mm jack
do gtx 1650ism good
Need a good quality mic and headphone combo, any suggestions?
A headset? Or separate mic and headphones? And budget?
what use case?
eyy the hyperx cloud orbit s
HyperX cloud orbit s if you want the best sounds, ok mic. $230 on their site now
it's better to buy a headphone and external mic tbh
depends on what your use case is since headphones can seriously change depending on what you need them for, same with mics. a microphone i recommend is the wave:1 from elgato and if you really want to, you could go black shark v2 x from razer. roughly under $200
eh, think its just over 200 but still
Uh
But they need headphones for that price too
@wild plaza depending on what type of headphones you like, something like an AKG K361/371 with maybe maybe Meizu dongle/apple dongle should work for now. Plus an elgato wave 1 for the mic.
Sounds nice
guys i need help with my virtual cable people cant hear my voice with it and only my soundboard
anyone know cheap alternatives for nanoleaf panels?
I would like to play USB flash drive audio on a stereo that just has RCA inputs. I know I need some sort of media player but, I’m not sure which one would be best. And how would I pick which audio file to play? Is there a media player that has some sort of navigation capability so, that I may pick old recording on flash drive radio program 36 out of 100. It would even be ideal if I could somehow see the file titles save on the flash drive to play on my RCA inputs stereo. Again this is just for audio files. Please help. Thanks much
Didn’t you ask this yesterday?
THANK YOU I DID NOT KNOW WHAT THEY WERE CALLED I FORGOT
theres really no alternatives to nanoleaf panels* that are as good as nanoleaf in lighting and diffusion
you could probably find some though
I think they didn't see my response initially, so they tried asking again
Seems they got the answer they needed tho ^^
I would like to setup a NAS drive, rackmount preferably, I was wondering what the best options are for max $600AUD? Should I buy a used server and install software or buy something preconfigured such as Synology? Excluding hdds
Just an i3 10100 and a crap tonne of hard drives should do
Tru but incase the wanna use as home theater system i3 would be nicer
So I have a 1k budget, and I’m looking to buy a prebuilt that I can game/stream/vr on, do y’all have any recommendations?
Hi, im new to this and I want to get a pre-built PC and a monitor for just school work and playing games like genshin impact, league of legends, minecraft and roblox. My budget is $1300 usd, any recommendations?
Would it be okay if you recommended because i really know nothing about building a pc 😅
If 10 year old me can strip and rebuild a computer, and it's even easier now, I think most anyone could handle it.
Nah you pushed them in the right direction at least
I promise you won’t get a gpu
That’s great and all. But still doubt they will find one for anything near msrp without constantly monitoring websites and being in an few stockdrop websites
Only because Dallas won the shuffle.
I haven’t won once yet. Sadly
@void pawn talia got a 3060 earlier after a few weeks with today's shuffle
which is nice
Yep
some gods iirc, don't remember, you can look up lore
Anyone know of any PCIe cards that have USB 2.0 and 3.0 headers on it? Or even just USB 2.0. I’m finding ones with USB 3.0 but none with 2.0
Not headers and it's a PCI card
So not what you're looking for 
Why are you looking for a PCIe card with USB 2.0 headers?
Only 3.0 tho
I don’t have any USB headers and I need my front USB to work
Oof el cheapo motherboard?

It's one thing to not have a 3.0 header
But to not have 2.0 headers
@old moss https://www.newegg.com/p/17Z-00NU-001N4
I hate how Newegg writes up a paragraph for you when you copy a link to a product page, and then on top of that it gives you tons of appended garbage to the link
If you have a spare 3.0 header https://www.amazon.com/CablesOnline-20-Pin-Motherboard-Adapter-USB3-AD24/dp/B00E42A4L0
Lol
Well you could use the cable to adapt the 3.0 header on one of the PCI cards you guys linked then
I glanced over the convo
I also linked one of those converter cables just before you did 
Like I said, I glanced over lol. Didn't click every link.

Hello! I was wondering if anyone knows of a USB 3.1 male to USB-C female adapter/converter that I can use for a docking station (including video output). The docking station is a HP USB-C dock G5. My laptop is an Asus UX331U, which has a USB-C port but that's not rated for video output (go figure!), but it does have two USB 3.1 outputs. So I need to connect the USB 3.1 output to this docking station that only accepts USB-C.
Does your laptop support thunderbolt? Because that's what it's actually running on, they just use the usb c connector
No, it does not support thunderbolt. I was hoping I could connect the USB 3.1 port to the docking station. But all the cables I could find specify that they do not work with video output.
Yeah usb doesn't support video without the help of thunderbolt iirc
Yeah, not without software looking for the video stream, which also requires the device to send the stream on its own.
It's possible in some cases but doesn't sound like it in yours.
Wait, then how does a usb to vga adapter work then lol
Never heard of but it's most likely thunderbolt to vga, as thunderbolt uses the usb port
Nope just 3.0 to vga lol
I used one for my hp prebuilt for like 6 months
Super sketch but it worked
Never heard of, idk :/ mb something along the lines of what fal said
Interesting
Yeah the driver tricks the computer into treating it like a video output so it will stream over the usb connection, but you still need something capable of reading that stream on the other end.
VGA is a lot easier to convert the signal than using a USB C on a port not designed for it.
I was kinda looking for some advice on what computer I should get
Im thinking about either a gaming laptop or an M1 macbook air or building a gaming pc
Like I use gforce now for gaming
But I do photo editing and school on it
And some video editing
so gaming and editing?
Prefferably
ok
Like I could buy a cheap laptop and a gaming pc
whats your budget?
mmm i have a good laptop for 1500
this is a rly good gaming laptop for 1500
ig if you wanted to edit more could go ryzen but that will mean you wont get a 3070
What geekbench scores do you get?
Anybody got a router they’d recommend that doesn’t require a modem? And also do gateways need to still be connected to something else?
Just use the router your isp gave you as the modem
i would do that but i want the router in my room so i can use ethernet and the modem is upstairs and i doubt my mom would let me move it down there
well you cant run 2 routers in the house? theres one point where the internet thingy comes into the house and you cant split it so how you are you gonna use two
I didn’t realize that
is the issue you want a separate switch in your room to hard plug things into?
a lot of mesh routers have switches on their satellites, so you could maybe plug the router into the modem, and then put the satellite in your room and hard plug into that. Assuming range and stuff work out.
It adds the benefit of extra wifi coverage too 🙂
thats probably the easiest solution without learning any more advanced networking
if you're comfortable doing something a bit more advanced, using a router as a wireless bridge is also possibly an option.
you could just use a powerline adapter
no, 3060 version saves you cash
3070 version is crippled to hell, sadly
It's a max-q
Besides 11300H isn't slower than 11370H by a notable margin
We already have a WiFi 5 router but what I was thinking is since that’s good enough for my family I would buy myself a WiFi 6 router to use for myself then they could still keep the WiFi 5 one and I could have more bandwidth for what I do
Also sorry for late response was playing Beat Saber lmao
Nope, you need somewhere to connect the router to the actual internet copper wiring 😅 but a power line adapter would do you good if you want to run ethernet to your pc
Alright
Hello!
I am looking for recommendations for a mouse that I can use while working at my work desk, ideally something that will work with my new macbook pro and my windows thinkpad X1 yoga
https://www.amazon.com/Logitech-Vertical-Wireless-Mouse-Rechargeable/dp/B07FNJB8TT/ref=asc_df_B07FNJB8TT/? I've seen lots of people use this mouse with similar setups
It's vertical tho :/
Mx master is supposed to be really high end
mostly for ergo/work
Fair
Thanks! I don't think I've ever had a mouse that was wireless - still getting used to bluetooth teachnology but from what I've heard it's supposed to be quite safe
I'm also looking at keyboards, this one seemed pretty good, any thoughts? https://www.newegg.ca/p/0GA-034A-00003?Item=9SIAT3MD029451
As long as it’s some form of mechanical I’m not very picky when it comes to keyboards... if you ask in #peripherals-and-displays I’m sure you’ll get blasted with recommendations @restive eagle
yes, I am mechanical all the way
Get keychron
For that budget
my friend wants a budget laptop that isnt a chromebook under $200
any recommendations?
Newegg has a lot of refurbished ones
Hello, i am looking for some advice about a Laptop that i could get that handles some programs like SolidWorks and such, and if i can game on it as well it would be a plus
I can't stay in one place for long time so that is the reason i am not getting a desktop instead
What would yall recommend as a good battery/ NP-FW50 to usb power connector for a NEX-C3 (camera)?Is it better to go with the battery straight to usb or the charging station with a couple of battery's?(I will be using for streaming, not taking pictures)
Just Ping me if u want to help. I found this one but I have never heard of the brand and idk what "dummy battery" means https://www.amazon.com/gp/product/B075Z4GXKG/ref=ox_sc_act_title_2?smid=A33PMTTWR7KAJH&psc=1
Maybe something like this? Hp Elitebook 2760P Laptop Intel Core i5 2.40 GHz 4GB Ram 160GB SSD W10P https://www.newegg.com/hp-elitebook-2760p/p/1TS-000D-0G8K9?Item=9SIAKDXDUH4979
What kind of a budget are you looking at? That's the 3D CAD program right? Only Nvidia Quadro systems are certified to work with that, so you're looking at workstation laptops that run around $2500 or more.
Yeah, the 3D Technic program
I was looking at around 1.5k ish
That'll be tricky, let me see what I can dig up. You want new only I assume?
Preferably, if it's not too much to ask for
Cheapest I could find that has Quadro graphics
https://www.dell.com/en-us/work/shop/dell-laptops-and-notebooks/precision-7750-workstation/spd/precision-17-7750-laptop/xctop775017us_vivp?configurationid=45f39806-1532-4888-b052-ad054d088d2d
$1782 after $200 off coupon SAVE200
I'm kind of a newbie in this branch, but I'm guessing the certified version is so it runs the newest version of the program, right?
Are you talking about this page? https://www.solidworks.com/support/hardware-certification/
Learn more about SOLIDWORKS Solutions by attending a Reseller event near you and networking with other design professionals. If you can’t get away from the office, watch one of our 22-minute OnDemand webinars at your leisure.
Yeah, you mentioned that only certified ones are able to run it, but I was wondering if i could run past versions of the program in another laptop
What they mean by "certified" is that only these listed GPUs are guaranteed to work with each version of their program. Other GPUs may still work, but it's not recommended because you won't get any support for it.
You can look up if a certain GPU will work (likely with modifications such as using specific drivers).
Older version of Quadro or Radeon Pro GPUs will still work on the older version of the program that they were certified for, and probably still work on the new version but won't work as well or as fast.
So a gaming laptop is highly unlikely to be compatible unless it gets some modifications
I mean a gaming laptop should work fine with it
ive used Solidworks on my gaming laptop with a i7 9750H and a RTX 2060 and it ran fine while having a large complex model loaded up
a quadro will however be better in ways but if you have to get a gaming laptop dont worry it should run fine
@daring trout
Yeah, I understand the Quadro is like the business model so it works perfectly fine, but I was wondering that
It's not like I have to, but if I'm gonna spend quite a bit, I would rather have a laptop that works for "everything"
Yep. I used solidworks for robotics and we had maybe around 1500 different model items on it and it ran fine
And yea makes sense
Damn, now that is a great example
I think I still have it on my laptop. It’s been awhile and don’t remember the exact number but it’s a lot lol
I was looking in this same discord and I saw someone link an Asus TUF 3060, so with what you said, it is safe to assume it should work on that one?
I mean it should run fine in theory
But don’t know for 100% if solidworks will have issues with the gpu
Yeah, that's the thing
I had people in my robotics team running solidworks on integrated graphics and thin and light laptops with weak gpus like the mx250 or whatever from Nvidia lol
Wow
Solidworks can surprisingly work on low end hardware
But can’t say the same for extreme projects lol
I have an old laptop rn, but It doesn't work
Not like I was expecting much from it, it is not designed to do much
Ah
It is from 2009 or so
Yep that sounds like it wouldn’t be a great experience with solidworks lol
Also keep in mind if you do get a gaming laptop that most of the batteries for them arnt great and you will probably only get a few hours on battery
Yeah, that's the comment I see the most everywhere I go
I tend to move a lot but it is almost always plugged in, so I guess it is okay
I just dont have what it takes to get a desktop
Oh, I'm studying Mechanical Engineering
Ah that’s pretty cool
Yeah, I've been able to get help from friends lately but I really need to get a new setup
Or else it's like not learning at all
So can someone recommend a laptop for around 1k euros its for school lil editing and light valorant gaming
What type of editing video? Photo?
😣 I want to buy a cheap 3060 ti laptop please can anyone guide me some suggestions 😰🥺
How cheap is "cheap"
@daring trout wanna help each other with Heat Transfer
My teacher is kind of an ass, almost never shows up, so i don't think i can be of much help

3060ti laptop doesn't exist
Wat
does
mobile 
Mobile =laptop
^
lol
Should be fine
Ok
where could I find an Xbox 360 E hard drive pin replacement?
its like a hor swap thing
If 120 V ac are connected to the primary of a transformer with a turns ratio of 1.5, what is the secondary voltage?
at least 5
Ha...
lawrence are you good
Howd you get my name?
ah, no im not good
life been a real downer thus far. Also I don't know how to solve that problem though its most likely really ez
oh geez
yo new to server I just want to ask
i have a 7-month Mac-Book pro but somehow chrome is sometimes really slow
i only got like 8 tabs open at once
is there a way to improve chrome's performance?
How much memory do you have? Chrome eats a lot of it.
https://pcpartpicker.com/list/vVyfZZ is this good
yes
@glad canyon wrong link
What do you plan to use youre build for?
mushkin pilot e ssd better value
^ was gonna say that but was just gonna rework 80% of list when they answered what for
anyone know a good laptop i can buy under 1k dollars? for gaming
Recommendations or thoughts on best thin/light with tiger lake or ryzen 4/5 series. My 2015 XPS 13 just died and now I need a new thin and light. My uses: 10-20 tabs in browser, large excel files with computations, light/limited video & photo editing, casual gaming (non-AAA). Features: must have color accurate display, io option arent a concern, must have webcam, size isn't important, discrete graphics aren't required. Price: $1,200 can go higher depending on variables.
should i enable DFS for my router? what does it do?
oF
Probs another xps if they're that price
and yeah enable it
it combines the 2.4 and 5ghz radio bands into one SSID
it already does that though
yeah i only see one connection already, and i have both 2.4 and 5g enabled
yeah i was thinking of something else, DFS has to do with interference detection
so the 2.4 and 5ghz bands actually describe a range of frequencies
it allows for a device to switch between 5ghz bands when interference is detected on the band in use
ah nice
Yep DFS looks for neighbors and selects the least crowded frequency
Hey, I have an NEX-C3 camera I got couple years back, I got a new battery because the old one broke, and now the camera is giving me this message. Can anyone help? Just DM if your gonna help please
is the gxl2200 mic mic a good mic?
I dunno. I have an MXL 2003A which sounds like it might be the same brand. I am not the happiest with it.

I need help. total noob. I have a beat studio 3 that comes with a plug in microphone accessory. the accessories is a 3.5 male to a 3.5 male. I need an adaptor to connect this to a 2.5 female jack on a landline telephone. I've ordered several on amazon and they don't work.
@tidal heart Hot wire the jack with Iron lament or solder.
uh i guess this is the right channel for routers.
Does anyone have experience with linksys velop? Im using a netgear orbi mesh network right now but Im thinking of preordering the new linksys atlas max 6e velop routers because Im unhappy with the featureset on orbi lately.
Orbi is a weak signal that jams easily whereas atlas is a stronger mesh
yeah ive noticed that. orbi doesnt rly give qos support either, or a few other things I really want
I would make a dish set for the router
I used to install Velops for customers when I did security systems, they're pretty decent but expensive
i dont rly care about cost, just featureset
Occasionally you'd get a dead unit, but very nice system otherwise and the software and interface was fairly intuitive
awesome. I think Im gonna put in a preorder, Im getting real annoyed with these orbis lately lol
Hah orbi is mediocre. . .
it was the best thing at best buy at the time and i needed something mesh extremely urgently and never bothered upgrading
I remember one house I put those in, it had solid concrete walls reinforced with rebar. You couldn't get a signal to save your life (literally, 0 bars cell service so no 911) and once I put 3 of those in the whole house was at least 3 bars.
wow that sounds like a old house. 70's or older
excited for the 6ghz band too lol
i cant figure out if this comes with 3 units 😦
Does the term "Sold Out" in Best Buy means that there is no stock at the moment but there will be in a future, or does it means that it will no longer be in stock, like other stores do?
Sometimes different stores use the same term in different ways, that is why im asking
Oof
someone know a good external ssd 1tb?
respond if aussie
best 4k tv for 1k
Vizio P series
Has amazing refresh rate (for a tv) -- 120 Hz 4k display -- great build quality
Imagine talking to your alt
Any advice for things to get when building a good 60% keyboard
@modern ether #peripherals-and-displays is nice
oh
Good
wigblopa
no
id say get gk 61 build kit get lube, good stabs, and aqua king switches and get pudding keycaps
just my preference
k thanks @mint temple
I really dont know too much about keyboards sorry
maybe try getting banna split switches
maybe ill see
because i want a thud sound when i click look up sound test for aqua king switches
yeah there also good
yea i heard a vid not my type but thx
It's all preference and wack
I wouldn't get gk61 though, pretty sure gk61 hotswap is only optical switches
anyone know a good enclosure for a samsung nand ssd
What drive
that is just a adapter
asking about enclosure
even though this is a 6gbps, i was wondering if i can use a enclosure that goes about 10gbps
just want to get the max speed possible while transfer
If you insist on a full enclosure https://www.newegg.com/startech-s251bpu31c3-see-details/p/N82E16817707404
Just use keywords "usb 10gbps to sata" for more results
I don't know if this is the right chat. I would like to start a Micro PSU with a button. Do I need a specific relay or what I can use best. would also be good if the LED in the button is on when the PSU is switched on.
You could wire your own switch pretty easily, you just need to have it jump the correct pins on the 24 pin connector
But for the PSU to stay on I would need a switch so the conditions herein the pins stays on but I want to use a button for astatic reasons
You could wire a button to it and see if it stays on, I don't remember exactly what intelligent controls the motherboard provides but I believe for it to stay on the pin must remain grounded.
Need so to be a toggle switch, IE connected all the time
IE< not momentary, yeah
SOmething like this that latches https://www.amazon.com/Quentacy-Latching-Pushbutton-Switch-Waterproof/dp/B071H9KWL6
I thought so, but couldn't remember exactly. No to a button jumper, but a switch/toggle would work.
That looks like something I'd use as an anti-theft kill switch in my car 🤔
I am going to be disappointed in you @kindred yacht if when i click that link, its not a big honking red button
booo
i am disappointed
:P
Big red button
It comes in red but only the illumination lol
can i use this?
im not alowed to poste a link 😦
@sly cave send me the link, and i will post it for you
I got it
on behalf of @sly cave https://www.aquatuning.de/wasserkuehlung/ueberwachung/taster-schalter/4316/phobya-vandalismus/klingeltaster-19mm-aluminium-schwarz-rot-ring-beleuchtet-6pin
i know you do Vintage, its for the record/making-sense-of-chat that i posted it :)
I posted without knowing you had replied
Typing on one screen, reading on the other LOL
ok then i have to find one that latches in germany. but thanks for your help 🙂
If it says "computer reset switch" it's not the right type
you have the cheat code of being able to see the filtered content so .. yeah :)
i found the same button/swicth on the german amazon page 😄
i want to hook up an MP3 player to my home audio receiver with a 3.5mm to RCA cable. I want to be able to copy MP3 files from my desktop to the MP3 player. The use of micro SD cards for storage is preferred
I have tried two MP3 players to date. They have worked adequately except for the output volume. The volume is great for headphones or earbuds, however when connected to my home stereo system, the volume coming thru my stereo speakers is barely adequate, even with the device volume and my receiver volume turned up to maximum.
I suspect there is some limiting factor in the MP3 device that prevents the volume from going too high, presumably to protect anyone who is wearing headphones or earbuds
Is there a devicevthat does not have this limitation?
I have a pair of headphones that are great for whatever I want to plug them into, quite low power, some headphones take a lot of power to drive
that might be what's happening
a digital source may be better. if there is a usb port on the receiver that can work, or ive used audio interfaces with rca outputs into receivers before and that worked on
Before buying headphones what are the features I should look into to buy a good one?
Soundstage, imaging, closed back vs open back, frequency response, etc
Clamping pressure, head band vs ears because if there's hardly any on the head band it gets sore to wear pretty quick, also earcup shape
Thank you 😄
Hey does anyone know if this computer is worth saving for as a starter gaming pc? https://www.newegg.com/asus-g15ck-bs562-rog-strix-g15ck/p/1VK-001S-007H7
^Or any suggestions for something within the same range with 8 gb ram, core i5 or ryzen 5, 4 gb vram?
looks decent
Just needs another stick of ram for dual channel
yea I'd count on it being one stick
That looks sick but by just looking at the specks it probably wouldn't cost you more than like $800 to build yourself.
I would however think that's a good idea if your goal is to get around the gpu crisis, because buying prebuilts is a great way to do that
Hey
hello
@gaunt finch Thanks; Thing is though, while the gpu crisis is a problem, I don’t really feel confident enough to build my own computer even though I’ve watched dozens of videos and I know how much cheaper it is and how good it is to know what is going into your setup but I just feel like I’d screw something up or something
Atm prebuilts are usually cheaper anyway because of it being v hard to get gpus and the price increase of them
@small meadow Yeah well I’m only 15 and I just started working so I’m gonna try to save up then decide what I want; I may opt to go for something with 16 gb ram and a core i7 or RYZEN 7 possibly a laptop so I can do mobile gaming but I really want to get a computer because I believe that computer gaming is way better than console because you don’t have to buy a new device every 6-7 years or whatever
Well that's true to an extent but i getcha
Can i get a recommendation for a gaming headset? I also enjoy listening to music so audio quality would be nice too. I don't need a mic and my budget is around 50 to 60 usd
what does the meizu dongle do
I use razer kraken TEs
they are usually on sale for like $60 and ive had mine for like 2 years and its still holding up strong
It's a decent cheap dac
Makes things sound nice
on amazon they are 100 usd
Plz no kraken, maybe the blacksharks
They traumatize me in past
Hi, I'm looking for a corsair mouse, one preferably compatible with iCUE. Budget around 60 usd
Get a Logitech g403 or g502 instead imo
502 overrated
I agree but others like it, i prefer the 403 tho
So is determining if a router works with a modem is it as simple as it is with a WiFi card?
I have an older 502 and I like it personally.
Not going to say its the best mouse or was great value especially since I don't remember what I paid but I've really liked it.
Also does the speed of the router or modem determine your download speed?
I basically know nothing on this subject lmao
A bad router or modem can hinder speeds but a good one won't necessarily make things faster beyond what you pay for from your isp
However nicer routers can typically handle a large number of devices better than a worse one.
Most modern routers are gigabit speed that exceeds your internet speed if you use ethernet
WiFi is another story
Usually modems are rated for a specific data rate
Make sure you get one that fits your internet plan
In most cases your modem is provided by your isp. Unless anyone else has had a different experience than that
Nah isp provides
anyone could recommend a good wireless earphones under 50usd?
not the beans, and not the ran cans
Can someone halp me plz My PC's perfectly functioning m.2 stopped functioning after I tried to add a new m.2 into the second slot on my asus z390a motherboard, the m.2s are a crucial p2 2280 and an intel 660p 1tb
Can you answer my question in the other section?
I am trying to find a decent laptop for my sister under $700 CAD or $570.15 USD approx. Best I can find right now is an Acer Aspire 5 for the money. Any ideas? thanks! 
Got my wife one of those for school that had an AMD CPU and an SSD in it. It's actually quite nice
Haven't bought something from newegg in many years.
Time to buy
What arduino starter kits do you guys suggest?
There is an official arduino starter kit
But it's expensive af
i need a 2060, how can i get one for regular price
You can't, they were discontinued last July
oh :/
Yeah
any good budget rtx gpus
but its xpensive
2060's are $500 used
wow
There are $389 or less MSRP 3060
im looking less than 400 used
I think Zotac as well
thx for the info
👍
It is but it's better than no GPU
I'm so glad I got mine before it started hiking up further
still 195 isn't a great price 
What do you guys think? Iphone 12 Pro Max vs S21 Ultra?
do you need apple's ecosystem for anything or ios? (work, ios exclusives, integration with other apple products)
do you work in business doing international travel for executive meetings?
if either is true, iphone. if not, whichever you like better; android is freer, iphone is more secure.
Completely agree but secure from police etc not really virus wise as they are both secure in that way, actually android possibly securer because of open source
apple app store is much more restrictive
which from a security standpoint gives me a bit more peace of mind over play store
I mean the best anti virus is not clicking on sketchy looking stuff but i getcha
I kinda disagree on the point of best av being common sense, but that's gonna be dragging on a topic lmao

ZOTAC IS TRASH
Considering they're just as sold out as everyone else..........
https://www.amazon.de/Gaming-Mainboard-Overclocking-Thunderbolt-3-M-2-Kühlkörper/dp/B08826YPLV/ref=sr_1_1?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=z490+prime+mainboard+white&qid=1620058300&sr=8-1
https://www.amazon.de/Vaorwne-PT1000-Temperatursensor-Drähten-Silikongel/dp/B08BZD1LDN/ref=sr_1_7?__mk_de_DE=ÅMÅŽÕÑ&dchild=1&keywords=Z590-A+mainboard+white&qid=1620058259&sr=8-7
which of these should i take i want to take i5 10600k
or i7 10700k
Prime Z490 is fine
Z590s are basically means they support 11th gen cpus out of the box
so thats the only diff ?
Pretty much as well as allowing pcie 4.0 if there's an 11th gen cpu in there
what are the stats of the i5 11600k compared to i5 10600k boost clock basic clock etc. ?
can you also mount a 10600k on z590 mainboard withot any changes ?
what is cl16 ?
ok
anything good under 40$ in newegg idc what it is just anything random
pancake mix 
Flowers
ok
cheap 144hz or 165hz or 240hz monitror vesa mount compatible?
whats your definition of cheap
100+ but 230-
youll probs get something 150-200 range lemme see
g242
Thanks dude
Which one is better? I can’t decide plz help
Also are you able to find be a budget secondary display 60-75hz please? Idk how to find some all the ones I find are hella expensive
Use pcpartpicker.com and use the find products button then go monitors
Think it just depends if you want curved or flat
Hi all. I have a harmon kardon AVR 525 audio/video receiver - it's at least 20 years old, works fine, but does not have any HDMI ports. My cable box (Tivo mini) has only HDMI. I need to be able to connect the Tivo mini to video-in ports on the receiver. It can take component (best option) or composite, or maybe S-video. There are zillions of cables and converters to address this problem, so many that I am not confident I can pick the best one for my situation. Can anyone advise please? Thanks.
Does your TV have audio out? Might be easier to HDMI from Tivo to the TV, then TV audio out to the receiver via SPDIF or RCA.
The TV does have audio out, but no HDMI ports. It's the same age as the receiver - OLD. Thanks for the idea though!
I can find lots of gadgets and cables on bestbuy and the like that SEEM like they will do the job - but as I said, I don't feel confident about picking one. The descriptions are usually a bit sketchy and/or too technical for me.
True I can’t decide I’m very bad at deciding
At this point something like this is your best bet, just needs USB power source of some kind. If you don't have a USB power source let me know and I'll find a different one. Even a cell phone charger with Mini-USB would work https://www.amazon.com/Converter-ABLEWE-Composite-Supporting-Blue-Ray/dp/B07RX69KR8/ref=sr_1_3?dchild=1&keywords=Best+HDMI+Converter&qid=1620165217&sr=8-3
I mean i prefer flat but a lot of people like curved it's personal
If I’m getting a secondary display should I go with curved or flat?
I think that's close, but it sees to me that it is for going from composite to HDMI. HAve I got that right? I need it to go in the opposite direction.
Ah, it is, brb
Imo secondary, unless it's on top of curved display should always be flat but up to you
Promising! It says HDMI to RCA. Is RCA the same as composite?
You want composite?
I can use it, or component - which I understand would be better. I'm just not sure where RCA fits in.
Ah I see thank you
Actually, it should
Yeah - it has the 3 component video connectors, and the L and R audio. Should I give it a try?
I would yeah
ok, thank you! I'll order that now. Looks like you race motorcycles - be safe! And thanks for the help.
You're welcome!
I do race and so does my wife. Fun way to kill time and money on the weekends XD
new techs?
I'm one our newer "techies" if that's what you mean
either that or new technologies 🤷
what would be a good fit for extending my routers signal, I'm only like 40 feet from it and it barely gives any signal at all
What's between you and the router?
a tv and 2 walls
The TV is probably more of an issue than the walls are, TBH. Can you move the router a bit so the TV isn't in the way?
I could try, whoever let installed the router did a terrible job of choosing where it goes
i was hoping to get some recommendations if there are gpus in by christmas should i try and get one or something like storage or should i maybe just wait for things to get in and go down in price?
i have a ryzen 9 1800x and a radeon fury and a 500gb hdd as well as a 24ogb ssd
im sorry btw if this is the wrong channel for this
Ehhh stock won't be fixed for a year absolutely minimum
And what fury gpu?
But it's probs best you could do for the moment
r9 fury thats all i know as i bought this pc from someone so i dont really know what is in it because i dont think they told every that was in the pc so
becasue thats what shows up in task manager anyway is the r9 fury
I see
Yeah I'd maybe go storage/cpu upgrade then upgrade gpu when stuff gets back to normal
I5 11400 and a b560 motherboard
is there anyway we could stay with ryzen or
Yeah but 5600x gross price
And you'd need to do a bios update
And you probs have a 300 series mobo which doesn't even support ryzen 5000
And ryzen 3000 is stupid pricing atm
Because intel is cheaper at low end and better
no i have a b450
with a CPu already in it?
Then you could get 5600x but 300$ too much for a 6 core
So you can update BIOS?
R7 1800x
ahhh
Or something
Ye
Yeah i assumed b350 board
Throw a 5600x and some 3600 C16 ram in it then
but i mean anyway should i go with the intel and a mobo or the 5600x because im assuming for them it'd be about the same price so
What mobo exactly is it?
patokav said a b560
No, that you have right now XD
oh some asrock b450
Hmmm, that might be important
Depending on the model, it won't support fast ram so a new MB may be recommended anyway
well i have 3200mhz rn so
Ya, that's a bit slow for 5000 series
Ehh you could always use 3200 and overclock it or just upgrade to 3600 down the line
ok , but i just really dont know how to do one in general as im kinda a noob a pc stuff still
and on top of that im not even sure how id get it to where itd be able to run the 5600x would i just do the bios update with the 1800x in the mobo or?
ok and i did go and see what i had just in case and i have the asrock b450m ac
Yep you'd do the bios update before you swapped cpus
Oh ok
just updated bios for the first time.
every step matters 😂 but step 1 is paying attention lmao
anyone know of any good budget speakers or soundbars?
I'm stuck using an old TV and don't have the space to get a new one since the only TVs that exist anymore are big boy 4K
You should be able to get a new 1080p one for cheap enough
But what do you consider budget
I think lg have a decent sound bar around that price
Nvm they're a bit more ¯_(ツ)_/¯
I was considering just getting the smallest 4k TV I could find but I'm not sure if a 45inch 4K is worth it
Change the ssd and the aio. Mushkin pilot e for ssd and ek or arctic freezer ii for aio. The drive is horrible and the aio is overpriced
Does resetting ones router actually have a chance at changing a dynamic external IP address? Looking to get mine reset easily and am confused as I thought it would be only the modem - not the router. However there is a large amount of conflicting info as people seem to use the word interchangeably or smth.
Nope, gotta be the modem. Most people refer to their router because they have all-in-ones
ye, that's what I thought. Would be nice if there wasnt so much conflicting info
It's going to depend on your isp, just reset the modem once and see
stupid question but can you make an apex pro tkl more tactile
Not hotswappable, can't put more tactile switches in without soldering.
Probably more trouble than it’s worth, but can be a fun project.
yo i need some wisdom here idk if its my ears or what but literally every audio device speakers headphones earbuds sound busted to me like it sounds like they are blown no matter the device even my earbuds playing at super low volume sounded rattly and broken
It could be your ears, or your mobo's audio output going kaput
no not mobo, i listen to music from various sources, could be bluetooth in my car, earbuds to my phone or speakers connected to my PC
^ if its happening on all devices, probably something wrong with your ears and not the devices
Do your pots and pans sound busted
Ask someone to sing to you or something 😳
If they sound busted then it's time for new ears 
lmao
Might be able to rma if you have warranty
Does a RF 12v learning code receiver lose its programing if the 12v power supply to it is lost?
Depends on the receiver. Most of them should keep it stored regardless of power.
The receiver I have is the inexpensive Smart Home RF 12v 2CH learning code receiver with A/B fobs, made in China. What do you think?
The receiver I have is the inexpensive Smart Home RF 12v 2CH learning code receiver with A/B fobs, made in China. What do you think?
I don't know, it's only sold on a few websites and the documentation is poor
Yes, documentation is really poor. I guess I'll have to test it.
Sorry, I can't find anything about that but they should stay in memory regardless of power
Most of them do
Thanks for your help. 🙂
YW
kk
Hey guys, I have a corsair harpoon mouse that does this static noise every time I move it. The noise seems to come out from the PC, at the USB connection level but once I swap the mouse, there is no noise. Do you think it is a cable or circuit issue?
Have you tried using a different usb port / different computer with the mouse first?
Yep, it is 100% the mouse. Tried different ports, 2 laptops and a desktop machines but the sound keeps coming out from whatever the port you plug the mouse in.
Wild
Is it like
The connections aren't 100% closed so the signal going over the gap is like resonating
The mouse functions normally, only when the room is silent you hear this buzzing and it is quite annoying : D
Wire noise then weird
Can anyone recommend a good bluetooth adapter? Im thinking maybe around 15$ but i can go higher if it means better
wifi cards have bt built in
something like an asus pcie card is pretty good
more expensive albiet
^
They do, although if you didn't connect the pcie card to the motherboards usb header only the WiFi will work
im lookin for a USB 3.1 or 3.2** external** storage device (24.249.115.13) in 1-8tb in size any ideas?
somthing like this
@slow quail my net is very little rn but you can try visit shucks.top if the site is still up, has list of some nice 8tb+ drives
thanks
dead chat xD
Is that normal
Missing pin? yes
Alright. Thought it was messed up
Really? Huh.
Every now and then 
ATX spec literally lists that pin as "NC", Not Connected
Alright
Could anyone please recommend a reputable universal battery charger ?
preferably able to charge NiMH AA, AAA, C, D
if 9V too even better
I was almost gonna get this but reviews pointed out some specific flaws 🙃
https://www.amazon.com/product-reviews/B07JPL476H?filterByStar=critical&reviewerType=all_reviews&pageNumber=1#reviews-filter-bar
Find helpful customer reviews and review ratings for NITECORE UMS4 Intelligent USB Four Slot Quick Battery Charger for Li-Ion/Ni-MH/Ni-Cd/IMR 16340 14500 18650 21700 20700 AA AAA and More Batteries, with LumenTac Battery Organizer at Amazon.com. Read honest and unbiased product reviews from our users.
That do be molex
What’s that for?
Not really needed for much other than maybe a fan hub
Alrighty
You can ignore it safely
Ok
What do you guys think is better:
My Main use is lots of note taking, multitasking (having multiple things open at one time such as powerpoint and notetaking app, google etc), General browsing of the internet, youtube and Netflix. Basically it.
http://bestbuy.ca/en-ca/product/samsung-galaxy-tab-s6-lite-10-4-128gb-android-tablet-with-exynos-9611-8-core-processor-oxford-grey/14584046
or
https://www.bestbuy.ca/en-ca/product/lenovo-ideapad-duet-10-1-touchscreen-2-in-1-chromebook-mediatek-helio-p60t-128gb-ssd-4gb-ram/14541985
What do you guys think?
Thank you
Id probably get the tab s6
S6 or S6 Lite?
Also why do so many people dislike the S6 Lite? I asked on another discord sever and they said not to get the S6 Lite but when i looked online everyone seems to like it.
Will I get a lot of bottleneck if I buy a ryzen 5 3600 with an RTX 3060?
If you already have r5 3600 is g but don't buy it now
Hey, so I’m trying to boot from USB but it isn’t working. I have windows downloader on it and can’t seem to get it
WDYM by windows downloader
The iso file for windows
Alright. Would I need to open that that is in the file?
You need that tool
Run it
Let it make a bootable USB
Actually here's a direct download
Do I just need to download it or run it?
Alright. I’ll need to do that tomorrow
ya, it's kinda slow
I have an apple laptop so it would be hell
Yeah it wouldn’t since it is an .exe file I assume
But GAH! I just want my dang desktop lol
On apple best bet is using bootcamp for process, bootable usbs dont always work nice
What would that do?
Bootcamp assistant is just the default macos tool for creating a windows partition
Although if for different pc maybe can use balena etcher and win iso to create bootable
You can rufus the iso
On apple snag VirtualBox and run a VM for whatever exe you want
Dual booting is slightly complicated and macbooks dont have a lotta storage unless you paid for more storage
No point in partitioning it further
I have yet to have anyone make a successful UEFI Windows 10 Boot drive on Mac
:/
It used to work, Windows changed recently
Ah as in not through bootcamp?
Even Bootcamp wonky now
Windows changed something a few months ago
I can't remember what but no one has yet to make a successful windows 10 boot disk on Mac yet
Bootcamp works reliably with windows 7 iirc
Yeah
I havent needed to run win 10 off off any of my macs tbh I run macs on my windows machine tho
So Anyone know how to say setup a Linksys Wireless Router as a Access Point by Hardwiring it to a PC and allowing it to access a Existing Wireless Network???
That functionality needs to be part of the router.....most don't have it. If it does, Linksys has their own support page for it. It needs to be a Smart Wifi Router and have Bridge Mode. https://www.linksys.com/us/support-article?articleNum=143751
See above
Ok. The one Im trying to use is a Linksys WRT600N Dual Band Wireless N router @void pawn
You're going to have to go down the DD-WRT rabbit hole if you want to do that. It's custom firmware for the router. https://wiki.dd-wrt.com/wiki/index.php/WRT600N
Looks Like Pain In The Rear End to me
It is
Crap. It was Good Idea anyway. One of the cats Destroyed my WiFi Antenna that came with my Mobo and Ive had to splice it in Multiple spots and its to the point my Bluetooth doesnt want to work anymore either
Oh, just get a new antenna
I got a crappy signal for WiFi now cause of it
They're pretty universal
Dont have the money for a New Antenna sadly
$7?
Dont even have that right now. My Son is due on Thursday so We are Penny Pinching for when He is Born
$7? Dude I can get one from goodwill right now .50, $7 is the decent stuff not the "it works 🤷♂️" stuff
I used to use a bent paperclip as an antenna 😂
Dam
Im about 50ft from the router thats conected to the modem and have such a slow signal
Good amount of Bars its just super freaking Slow
Signal strength vs signal quality it sounds like in your case, or link speed limited by hardware
Hardware is Built into Mobo. ASUS TUF Gaming X570 Plus WiFi
Yeah it's probably poor signal quality then from interference due to lack of shielding
Thats What I figured. I have it wrapped in Electrical tape like no tomorrow
If anything that's probably hurting it more. If the wire is cut through the shielding it'll leak electrons.
Yeah Both sets of Wire are exposed
Cat litterally Broke the wires multiple times. With one splice in the wires it was working fine but the damc at did it again so now theres 2 sets of splices
Nothing for it but to replace the antenna then, or try to install dd-wrt like vintage suggested.
Yeah it's a pain but if you don't want to spend money, you're limited in options.
I wouldnt even know how to start with Installing DD-WRT. Its confusing to me honestly
I may know how to build a PC and do all the custom Fun stuff to it but other things Im lost on it
Read the steps it gives twice, go through it in your head, then go for it. It sounds like that's just an old router left lying around anyway so what's the harm?
We're here if you need help. Personally I've installed it on 3 separate devices.
Ok
Oh and a fun trick to keep the cat off the wires is put tape around them with the sticky side out
The same trick as keeping them off the counters
Counters arent a issue. Hes also learned to hate my BB gun. I unloaded all the BBs from it and Just use the CO2 cartridge to blast air and make noise. I only have to point it at him and he runs now. lol\
Still keep it unloaded cause of the kids
Rather keep it where it doesnt hurt him but gets my point across to leave my wires alone
@void pawn So based on what Im reading I just hardwire the Router to my PC and Flash the Firmware from within the GUI of the Router???
Also Its not letting me Download the DD-WRT
Do you have version 1.0 or 1.1 of that router? It typically says on the sticker or in the web interface