#windows-ios
1 messages · Page 59 of 1
Will try that when I get back home later in the evening
there is my batch file that has a whole section on network fixes in the pins here
Hmmmm it appears i can no longer pin and unpin here
anyway its still there
press 1 to choose fixes and network fixes is 4 i think
itll say
just download and run through em
Anyone have any idea how I could have unplugged my Realtek USB GpE Family controller? Driver Easy is bugging me about it
Is it these?
Download link for the utilities and fixes batch file
Hello, recently upgraded my build a couple of days ago. New mobo is a gigabyte x570 aero g.. it’s been working fine until today the 2.5 Ethernet port just stopped working I have idea what’s causing the issue or how to fix it. I’ve tried installing the intel 225 driver update from gigabyte, but that didn’t work either. Any suggestions or help would be appreciated. Also in the bios it says link status on the controller says disconnected
Try another cable, and reboot your router
@random wagon
Ok will try rn
I swapped cable ports on the modem and that worked , thank you @vestal ibex 🙏🙌🫡
Might as well
Boy I hope it doesn't actually take 3 hours
It most likely won't but sheesh what an estimate
Nope didn’t do anything
My pc is showing unallocated disk i have my very very important data in it
Pls help me
U can try using something like recuva
Hello everyone,
Yesterday my pc's wifi speed was suddenly very slow. I ran a speed test and it ran at about a fourth of the intended speed. All my other devices run at the correct speed.
My pc seems to not go over 40 mbps, I've connected it to 3 different internets and none went over 40.
I have most recent internet drivers.
Ive tried network reset.
Windows is up to date.
reinstall driver
All I did was a reset this Pc and it fixed the driver I guess and it’s connecting to my wifi now
but why.....
i think this cpu can run windows 11 just fine as newer hardware
microsoft just not allow me
this is annoying going from a laptop that run windows 11 to a pc older but a bit better but cant install windows 11
i want the new update with the file manager and now i cant try it.....
it even has a tpm 2
sorry about the errors i have a sticky keycaps
The i5 6400 is too old for Windows 11 officially because it doesn't have a TPM.
You'll need to bypass the TPM using a customized ISO to install with.
it has a tpm 2 has you can see
The correct TPM version is present in 8th gen or newer
the correct isn't tpm 2?
2.0 is the right version but that CPU doesn't have it, that's an incorrect result.
If it's being detected as supported you can always try installing anyway. I think that's the secure boot check it has the X on.
yes i changed it to uefi in the bios
before it was legecy boot
and when i have legecy it showed that i dont have tpm 2
now it does
yeah i know its not in English but i think you understand
Any ideas about my issue with the 3060ti here on toms? Easier to keep info compact https://forums.tomshardware.com/threads/system-wont-post-on-a-3060ti-after-one-of-the-displays-broke.3761839/
Hey guys
I have a dual display setup, one of the displays broke ( for a few days kept on switching on off from time to time then all kinds of lines appeared on it ). I turned it off, and unplugged it from my PC. Then at night, I did the daily PC restart, and when wanting to start Plex on a TV...
Last thing I can do is do a fresh windows, problem is that I have to use the non UEFI GPU to do that.
Reason: Bad word usage
Hello, could anybody recommend me a calendar app that supports Mac, Windows and iOS and cross platform sync? Thanks in advance
you can download rufus and make tpm bypassed windows 11 install on a usb drive if you really wanna upgrade to 11
Google calendar probably
I don't know if it has a native PC/Mac app but it works perfectly well in browser
And then iOS has an app
Yeah, I know about Google calendar, was using it up until now
But yeah a native app for PC and Mac would come in handy
Thanks for the suggestion though
looks like OpenRGB doesn't detect Antec Prizm X argb fans.
if any1 knows of a fool proof recent guide on booting multiple OSes on a single SSD (on an old laptop),
plez share 🙇♂️
Does the laptop support UEFI or is it regular BIOS
I believe it does support UEFI
yes it does
it's a Dell 7130
as for my use case, it'd be nice to be able to quickly switch among, say
- win11 for the touch/pen/multi gesture support
- android for the mobile apps
- fedora, hopefully a middle ground between performance / feature (run fast + touch/pen support)
- ChromeOS who knows might win in the end thanks to its Android/Linux support, and maybe even being to run some windows apps with Wine
- MacOS ??? I'd prob give up on this one unless it's known to work on my particular laptop
and at the very least the multibooting would be nice to test/compare them alongside, instead of 1 by 1
and knowing the right sequences
- things like disabling secure boot that may work for some linux distros, but bad for win 11 etc etc ((:
that's why I'm in need of some comprehensive step by step guide
guess I'll just have to watch a bunch of tutorials
Windows 11, once installed, doesn't actually care if secure boot and tpm are left on
oh ic, the comment I saw said something about disabling them being the issue
it's just a YT comment tho hah
I've seen more problems with leaving them on than off tbh
gotcha thx I'll just keep it off then
so ig to install leave TPM on (if exists),
whether to leave on depends on whether we still get these warnings
and for other OSes I'll just keep secureboot/tpm off I assume
tpm on -> install windows -> tpm off
enable take update and disable every monf or so
gotcha thanks that'd work hah
could u help confirming whether my laptop has TPM 2.0 or nah ((:
they make it sound like TPM and PTT are mutually exclusive,
and yet that TPM 2.0 message is shown under PTT
press windows key + r at the same time
type in tpm.msc
hit enter
send pic
thanks I'll go back to windows
someone just said it depends on CPU and mine is way too old, not at least 8th gen intels so nope
ehhhhhhhh
and I did this it just says compatible TPM cannot be found
u can just totally bypass all these things btw
u will have to reinstall windows
but it is possible
idk why not just run win 10 tho
from PCworld last oct
ya I was tryna see if I can avoid messing around with regedit hah
just to test things out, improved touch/pen support
no choice at this point hah
easiest method
reinstall
thanks I'll check it out
I'll prob use the bypass that comes with some of these boot tools
i don think ventoy has that capabality
just install using rufus and then recreate ventoy drive'
looks possible
https://www.ghacks.net/2021/10/19/ventoy-1-0-55-bypass-windows-11-requirements-check-during-installation/
but I'll go with ur method
just realized rufus lets u customize win11 download too hah
- just not manually editing stuff
hear me out tho
why do u need a linux installer while installing windows
just install windows, and then create an installer again using ventoy
oh ventoy ? coz I'll do a multiboot
oh 🤔 🤔
multiboot linux and windows right?
what problems do u suspect using ventoy would cause
ya and android and chrome 😂 😂
wat dis mean
u willingly run chrome os?
just testing things out hah
F
that chrome os got android and linux support too apparently
windows iso?
bro chrome os is linux
wym install only
why does it exist ? xD
you cant boot to desktop from ur usb on windows
there is only an installer
to install windows
it's been a while since I last install an OS 🥲
wait once windows is installed via that installer, then u can boot to desktop no ?
think I'm missing something
yes that is why you install the os
to boot to it
thats the whole point
right so which part have I been missing 🤔
i dunno?
I mean I get this, so I couldn't follow what u meant xD
what i meant where?
last time I installed Windows, I simply used rufus to create the boot device,
then install it that way
yes
ya so what am I missing xD
i dunno
u were tryna warn me of something I assume
I think here haha
but ye I'm already expecting I'll mess up this multiboot setup on my 1st try haha
we'll see
Just follow the guide i linked and install windows
dont bother multi boot\
forget it exists
use rufus
then create ventoy for the other OSes ?
install winsows
💀
after windows is installed you can make all the ventoy drives as you want
for now forget it exists because for some reason its really confusing you
just use rufus
My pc sometimes freezes but I can still move my mouse and abd hear audio but nothing opens and the screen is frozen except the mouse and audio
would I ever have a need for these recovery partitions ? (a Dell tablet)
or could I delete them all safely ?
Also where are manufacturer's diagnostics tools (at boot) usually installed ?
would it be in one of those partitions or in BIOS or ?
The ESP partition is your bootloader, it's critical, and the smaller partitions are for recovery and diagnostics. You can delete the 2gb partition, #4.
thanks I really just wanted to keep this hardware diagnostic tool
I'm not sure what that no name OEM (reserved) partition 9 is for that's empty but takes up 8GB
Windows 8 and early 10 used to reserve part of the disk "just in case the OS needs it later"
I'm in the process of backing up those partition (full disk backup)
and then prob leave those OEM (reserved) intact, about a 15GB loss 🥲
ig I could delete that MSR partition
PBR is probably what you need to reinstall from scratch
is it what that empty 8GB partition might be fore ?
I mean it's empty anyway, no harm in deleting right hah
More than likely, you should be able to delete it no harm and shift the partitions over
ig what bothers me is the "OEM (reserved)" type
gotcha I'll prob do that
Those diagnostic tools might be in the 2gb partition, not sure
so ig I can delete 3 and 9
altho 3 is MSR so ig it'll be overwritten anyway ? 🤔
there's that partition 2 called "DIAGS" hah
and ig that winretools too
sooo basically i bought an external disc drive, as neither of my laptops have one. works fine with my CDs but, with DVDs, it just doesnt work. I installed VLC media player and it works fine with CDs also, but, when i play DVD's (using Zootopia for this example) it just brings me to the DVD menu on the movie where i'd click play, or spanish version, settings etc, and after i click play it just- shows the VLC cone logo. nothing happens. will not play. its set as my default media player too. idk why
ping if reply
“So have you tried resetting your device?”
resetting or restarting..?
i’m not factory resetting my laptop just to play a movie tf ☠️
and it’s VLC, as the issue occurs on both my laptops
No u just trolled in general and here
its actually called not giving trash advice so umm pls dont
Reason: Bad word usage
oops
sorry forgot
but anyway still
really?
i already said It’s VLC
not my laptop
because you’re annoying
i already said it’s VLC not my laptop
it’s VLC not my laptop it’s VLC
it’s VLC
i’m not i just don’t appreciate you coming in here trolling me giving bad advice when i genuinely need help
not at you
and if you don’t know how to deal with tech why did you even try helping, i appreciate it but if you don’t know you don’t know, someone who isn’t tech savvy like me or others might actually believe that kind of advice you gave
and end up ruining their PC
i’m not dealing with this i’m not dragging this on the mods can deal with this
have a nice day
hello lately my pc has been crashing when playing no man’s sky and it’s always at the same point in the game, the sound cuts and then my pc crashes giving me the blue screen with the sad face error and restarting (i was only experiencing this with no man’s sky) and just today i was playing risk of rain 2 and the game suddenly crashed giving the same error and i’m starting to think it’s a software issue and not steam
i was wondering if anyone could help me figure this out
Download whocrashed and see what the error code is
just downloaded it
but this happened
also im on windows 10
You got it from the resplendence website?
yup
Try running it as admin
Ok, I can analyze the files from my computer instead. Copy the files located in C:\Windows\Minidump to the desktop, compress them into a zip, and DM it to me.
There's no personally identifying info in those files.
For those curious it appears to be "video memory management" blue screens, running DDU now
Anyone got a windows 11 promo code from a YouTube vid?
those are sus
Whys that?
Potentially they're illegally obtained volume license keys
Anyone know how to fix Watchdog timeout error?
Blue screen? Undo any overclocks you have and run whocrashed to see if a program might be causing it.
Also run the fixes in this tool for windows just in case. https://github.com/NeweggTechie/Windows-Troubleshooting-Utilities/releases/tag/v12
Will try that, idk my PSU shorted recently and thought it took my GPU. Replaced it with a new one found out my pcie5 lane is bad so put it in my pcie4 lane and was working now no more display and getting the watchdog more frequently now
It could be a bad motherboard in that case
Having two separate issues that are almost unrelated like that often points to the motherboard
Reason: Bad word usage
It's absolutely insane, 2nd 690 board that went bad
In defense of the board, it wasn't expecting to be hit with a power surge when the PSU died. Better quality PSUs will prevent damage better, but even the best ones trip up sometimes.
Well I was using a G.Skill 750w Gold but just upgraded to a Corsair RMX850w Gold. So definitely will be fine. I'm just hoping won't need this GPU. I was honestly happy with my EVGA 3070 and don't really need a 70ti lol just got it cuz that was all in stock
Oof the best G.skill PSU is C tier which is totally not good enough for a Z690 build
And according to JonnyGuru, one of the top PSU guys in the industry, they should only be run on 230V power because of major issues on 110V
Never knew that oh well. Figured it was a budget PSU. But yeah I called ASUS they confirmed bad motherboard. So now I got 2 GPUs that should be working lol(The RGB for my EVGA 3070 still works so Imma venture to guess that it is still working). Can't wait to get my mobo in and have a PC with 2 GPUs in it 🤣🤣
Get a better power suppy as well
They got a RM850x now
Cool beens
So once Asus completes the motherboard RMA they should be good to go
indeed
Can someone help me with this? So I finished building my pc but i have no idea what to do about software. I got windows 10 on a usb and have been trying to set it up. I dont have any drivers to install and idk what to do about that.
u have internet access on the pc?
I dont think i do.
u got another pc to copy over drivers via usb drive?
It shows where do i want to install windows and nothing pops up so i cant click next
Yes
oh
u need to select drive
dm me pics of what u see
pic sent
Ok so it appears that ur internal drive isnt being detected
What ssd u got?
@cinder mauve
If you're on intel disable the Intel Rapid Storage in bios
^
It was semi built. All it needed was a cpu, gpu and a bios battery
Whats the difference between buying a cheap Windows 10 Pro key and an expensive version of the same card?
There's so many different prices but I was wondering if they are different versions
There is OEM which tends to be locked for one system and Retail which you can use on more than one
im currently trying to install origin, and i keep getting the "The application was unable to start correctly. (0xc000007b). Click OK to close the application.
is there a fix to this?
(i looked it up and i know its a windows issue, not origin)
please ping if reply ^^
after doing a BIOS update it says my pc is compatible/ready for Windows 11. Have they ironed enough of the bugs out that its worth switching over to?
it was actually snappier back when i rocked my 12400f with it, compared to 10 i found it more snappy
it's pretty good nowadays as long as you can fit in with the interface
you can make it look like win 10 also, but i'm still on 10 personally
Probably because newer bios versions the TPM is enabled by default.
It's pretty solid by now, but not many extra features an average user would use.
any body know how to have a folder auto sync to another drive?
locally sync from one drive to another
i just want a automatic way for when i modify, create, or delete files in a specific folder that it mirrors that to another folder on an external hard drive
ok i was able to find a program called freefilesync which is an open source program that as the name implies syncs files
and it has another application which just takes their batch files and automates them
So im having this issue on Windows 10, where the USB WiFi adapter I have cuts out every minute, and a quick disable/enable on the adapter will give me the wifi back, does anyone have any fixes for this? Everything online I have already tried, or literally recommends me to "Get better hardware".
so i think i locked my windows key, but my keyborad doesnt have a specific key for locking it. is there a command/key bind for it?
how would u go about automating user's actions,
such as opening an application, clicking on some buttons within that application,
then maybe typing a message, and then send that message ?
(Windows 10, but I'd be curious how it'd be done in any OS)
So I am looking for an app that will allow me to use a network location (my PC) as my own cloud for backup and syncing. @crisp spire ? sorry for ping, but I love your brain for it's amazing amount of knowledge.
as in u wanna have a network location show up as an internal drive?
wait nvm
just backup to external network drive
Tbh this is for a friend. I think he wants to be able to use his phone to be able to access his PC like it was cloud storage
yeah
looks aight
Thank you very much 🙂
Hello im having a problem when I try to instal windows it saying restarting pc to finish the instal then it just resets back to the instal screen again
Take out your install usb when it reboots
I did but it just said there’s nothing to instal it on
looks interesting
anyone know how can i get rid of this?
right click the taskbar
ok that concludes my techie activities for the day
good techie
Has anyone here got extensive knowledge of windows XP?
It's old - the end
Yes
What do you need?
its been quite a few years since i used xp, not sure I remember anything xD
I'm having issues with audio in Windows Home Professional SP3 32 Bit
I've installed it on a laptop that fully supports the operating system in order to play some older games
There is no audio device
It doesn't show up in device manager, it doesn't show as a device that isn't installed, I've tried 3 drivers, manually installing the drivers via the "Add Hardware" tool and still nothing
In order to get sound, I have to plug in a USB audio device and connect it via aux to a speaker
I know the device is supposed to be a Realtek HD Audio device but even the toshiba driver doesn't install it
There is only one driver that is an audio device, and that's my USB audio.
The only other driver with any relationship with audio is this UAA Bus Driver for High Definition Audio
is Airdroid a good way to do wireless file transfers, to and from phone and pc?
I'd just upload stuff to google drive etc
Is anyone else experiencing an issue with windows 11 where some windows are extremely dark compared to others. Like all my overlays in games are dark grey and some windows are for like oculus and extra Steam windows. Thought it might be an issue with HDR but changing the setting didn't help.
for some reason its telling me to activate windows, i never had this problem before and had this pc for a year or so. I have no idea how to fix this and i need help, should i reset my pc to try and fix this? ping me if you could kindly help me
I had this issue as well. It would always show after my PC went to sleep. If you run the activation troubleshooter in the activation settings, it will recognize it as activated until you sleep or hibernate again. After that, a full reboot is necessary. It got so annoying I just switched to Windows 11 instead 🥴
So should I just turn off my pc every time I get off it or putting it on sleep is good?
KDE Connect
sorry for the late reply
so would anyone happen to know what this error means and how to fix it?
Failed to initialize BattlEye Service: Driver Load Error (1275)
it occurs when i try to run Fortnite and only Fortnite
i play Ark which uses battleye too and no issue
i am on insiders so i can get windows 11 if that may be an issue...
windows 11 hasnt been made available to my laptop yet as an update
thanks man!
well uh seems that i have made an conclusion... i switched out hardware which was the motherboard because it randomly died idk how but it did and i dont know my product key since this pc was one of my family members who passed so i guess i have to buy a new product key
Hey, I got a quick question on how to install Windows 11 Home/Pro to a new custom PC. I am building my own custom PC and I want to add Windows 11 but I am not sure how if I need a USB or I just buy Windows from them so, may anyone give me some information on how to install Windows? This is my first time messing around with a custom build and the OS. Thanks
just a usb drive
Ah, alright and when I connect the USB drive, how will that work like will it ask me any prompts or it will automatically detect it and send me to the installation of Windows?
u need to make the usb drive bootable for installing windows first
just a usb drive will do nothing
The motherboard that I bought is a ASUS ROG STRIX B550-A just saying incase it has something different
Ah
I'm guessing I go here
Oh and does the USB have to have a specific GB?
u want tgat one out of the 3
8gb or more
I currently only own a 3.0 type 64GB USB to transfer windows
Oh
Well that works
Thanks for the information!
also u might need to update ur motherboard bios to work with winows 11
or change a few settings in the bios
u want to find tpm and turn it on
@pure flax
also dont drag and drop this onto the usb drive
u want to run it on another computer and select the drive
Ah
Is there a way to update the motherboard for Windows 11?
Well I just ordered it and the motherboard is barely coming in the mail, I don't have it yet but I am having an idea of where that could be
Well on ASUS I saw on a photo of the BIOS that said 0222
Not sure if thats a true BIOS version but that's what I saw of the motherboard
uh
did u get the board second hand?
What that mean?
where did u buy the board from
Amazon
Let me give you the link
Experience next-level performance and connectivity with the ROG Strix B550-A Gaming, featuring PCIe® 4.0 and 2.5Gb Ethernet. Robust power and effective cooling make the ROG Strix B550-A Gaming the perfect partner for 3rd Gen AMD Ryzen™ CPUs. Futuristic aesthetics, intuitive software, and a reliab...
Ah, alright
Ah, and is it hard to update the BIOS version?
nah
just format usb drive to fat32 format
copy the new bios onto it
and then in the bios just update
Not sure how I will do that since I'm barely getting into this so I may ask for help again once I receive the motherboard since I will also be running AMD Ryzen 9 5950x on it and I heard that it also needed a BIOS update
nah
Is there a video showing how to do all the steps?
just that a newer version of bios will have tpm on by default which is needed by windows 11
Ah alright
you can enable tpm on the bios the board will ship with and windows 11 will work
Oh I think I am getting it now on how it will work
hi
Heh.. was getting 42fps in ff14 for some reason... ran @crisp spire .bat ram cleaner file and bam, jumped to 60fps when it was finished lol
jesus
right? been a few days since I've ran his .bat
sheesh
idk whats going on but when ever i launch destiny 2 (the microsoft store version downloaded through the xbox app) it prompts me to install battleye twice despite being already installed and then just doesnt launch
ms store version is buggy
just get the steam version
i own more stuff on the microsoft store version
Uninstall Battleye fully using revo uninstaller and run it again, hopefully it installs correctly
i was able to get it to work but now its gotta verify files so thats gonna take a bit
Oh fun
i just ran wsreset and verified the files in the xbox app but now destiny itself has gotta verify them
also while im here
my desktop kinda had a stroke and died
it bluescreened while setting up my rift cv1 and didnt even sit on the bsod for like half a second and then rebooted and now it dont boot anymore
tried reinstalling from the recov environment but that didnt work so i tried reinstalling from a flash drive and everything worked up until actually booting off the ssd and then it got stuck
Could be the installer, or the SSD itself. I've seen that symptom in both cases.
What program did you use to make the installer?
rufus
Windows 11?
Hmm, I know rufus had an issue with 11 but not 10.
Try using the official tool instead if possible.
Oh it could also be the USB, I've had that issue before too.
Yeah I've got one USB that works 100% fine unless I try to boot from it. The boot sector is bad or something, it just refuses.
ill try making a new installer and see what happens and then ill try the media creation tool
Ok
wack
In defense of said USB, it's old and has been through a lot. Like me accidentally DD'ing zeroes to it, which was... interesting.
lol
yea
on a side note while im gettting the flash drived flashed destiny is now acting as if im constantly pressing the escape key
no other program is doing this
just destiny
ok so its more than just the escape key
cause theres now specific circumstances where its perfectly fine
Trippy
ill fiddle with that later
destiny disabled my windows key yesterday
had to unplug and replug keyboard
mebbe try that
Destiny 2... you launched 5 years ago. WTF is your excuse for this? "Oh Bethesda got away with it so why can't we?"
im getting a battleye error with destiny now and a few other games... no idea what the issue is as my drivers are up to date, ive restarted my pc and game, and tried a few other fixes i found online to no fix...
this one here
messaged their support as havent gotten any help anywhere else besides one person who ran me through the exact same things i found online
tbf this is the first time game acted out like that really
does battleye play nicely with insider builds?
I do see most of the recent issues with this game being Windows 11 related
Insider build could be worth it for this, I know they changed a lot for the upcoming build.
it reset a few registry keys i need
yep Driver Load Error(1275) is just windows not letting driver load in afaik
battleye worked fine until a few hours ago again so i wonder if its just since im on insider and theres so many frequent updates
ah
its a windows error
alright
yep
at first it didnt let me due to secure boot being enabled even so i have that disabled now
what anti virus u using?
norton since it was included with my laptop
kinda surprised me seeing that over mcafee
At least it's not Kaspersky or McAfee yeah
anyway lets go the nuclear option here and disable driver signature enforcement
open command prompt/powershell as admin and paste my next message in one at a time and hit enter
alright
bcdedit.exe /set nointegritychecks on
Man last time I had to do that I was using my Action Replay that only has an unverified Windows 7 driver that works on 10+
did u restart pc after?
oh was i not supposed to do that as one message?
as in?
It's all one line
alright
and try installing battleye again
should i wait for this windows update to finish installing?
nah no need
Installing or downloading?
Because if it's installing it might force you to wait anyway if you tell it to reboot
alright
https://github.com/NeweggTechie/Windows-Troubleshooting-Utilities/releases/download/v12/Windows.Utilities.and.Fixes.V13.bat
Id go through the fixes in this as well
Well it let me but its forcing me to wait on the update screen
Alright
Thats to download a bat file though
the first and 3rd one in the file
Yes, it's a bat file that rawr wrote. Lots of fixes and tools. Personally read every line of code to check because paranoia.
Ah
Yeah still wont work
Don't underestimate my paranoia when it comes to running scripts from other people lol
Yeah
also how did u not find the part that installs mcaffee anti virus because they sponsored me
i mean what
I personally would have a reason for that too…
My computer is even telling me the bat file is unsafe lmao
I did I just commented it out, not dangerous at least 
XD
yeah thats just because you cant sign a batch file and windows detects anything that isnt signed as unsafe
like attempting to sign a batch file will make it not work anymore
It was telling me its not downloaded commonly
Which you'd think not allowing unsigned stuff to run would be a good feature, but any hacker and virus maker can bypass it with trivial effort and I've seen it get in the way more than help personally. Maybe in enterprise environments...
So what exactly would i do with the file? Do i run it or is there commands i need to copy from it?
just double click
Chkdsk will probably have you reboot anyway
Alright
Alright
Yeah it'll tell you it can't check the currently active system disk and it needs to reboot
What i don’t understand is what’s different between my laptop and desktop because all these games work without issue on my desktop
I think the way i wrote it forces the are you sure prompt but asks before rebooting
yeah
passes Y through but asks if u wanna reboot
Yeah it had reboot as an option after sfc and dism
tahts if u see any errors
No like it asked if i wanted to go back, close out, or reboot
Thats what i did
yep thats correct then
Does it screw anything up if i closed out of the window though?
I accidentally hit 2 after going back
Nah just open again
Alright
Its checking it now
ok cool
How many stages are there?
but yeah imo the bat file is nice to have.. i recommend the debloater
i dont remember but i think 3?
it shouldnt take more than like 5mins off an ssd
huh
Well, it depends on the SSD, how full, and what files are on it
yeah fair enough
Yeah its saying i have 642k items
yeah that can do it
That's like half of mine lmao
bruh
Oh fun, I love when they make them as loose files instead of archives
It's so much more convenient /s
Oh they’re rar files
I just plop them into the vortex launcher
Oh i was wrong
5 stages
Oh, I thought you meant the mod folder was on the drive with the installed mods
They are if im understanding what your saying right
Like i download the mod then copy the file into vortex and then just leave the original file in my downloads
Uh what
Ey it works
Thanks!
error was since i set Destiny to open as admin
Pog
Now to figure out how to unlink my current Bungie account and connect it to my PS account
Okay that was simpler than i expected actually
my pc has been running very slow lately (tabs taking up to a min to load) is there anything i can try to figure out the problem I have already run Malwarebytes 0 detections
easiest thing to see if its slowing your pc in any way, clear your recycle bin 
that might just be the problem
💀
it worked Thanks :D
How did u do this then
Did u use hacks
yes, am hacker man
had to install linux into my windows vm
thats running off my gpu vram
Can you upgrade from Windows 11 to Windows 10 Pro? Just curious.
thats not an upgrade version wise
also you can only stay on the same edition
so home to home
or pro to pro
aw the recycle thing worked a bit, still laggy tho
It’s a laptop...
So I fell asleep yesterday day and just tried my completely clean windows installer and it locked up at the same point
It gets passed copying all the files but when it actually tries to boot windows off the ssd it locks up at “Getting devices ready”
Hey, I just got today my motherboard the B550-A and I was wondering if you can guide/tell me the steps on how to update the BIOS and how to install Windows 11 into my pc right here in Discord since I'm going to use my old Radeon RX 580 graphics card so I won't be able to use my old pc to install Windoes 11 to the USB and the update to the BIOS
ok i have a very peculiar issue
so i have destiny open
and not only do i have an issue with the keyboard acting funny only in destiny
but any time i press any button for any reason my frames go from 30 to about 15-20 fps
it lags the hell out of my game if i touch the keyboard at all
Idk if anyone has helped you yet but have you tried uninstalling/reinstalling your GPU drivers as well as your Keyboard Drivers?
chipset drivers updated?
ok so hours later after playing destiny on my xbox now the issue has just disappeared with nothing done to fix it
Looks clean
https://github.com/NeweggTechie/Windows-Troubleshooting-Utilities/wiki/Steps-to-create-bootable-Windows-installer-from-Mac,Linux-or-Android#make-a-windows-bootable-usb-install-flash-drive-using-an-android-phone-thanks-to-𝕽𝖊𝖔𝖗𝖝𝖎𝖘𝖙-on-discord-for-the-guide
Your android guide no longer has pics that take up the entire screen
I figured out how to resize em
Thank god Rawr haha
so i just found out an app i use doesnt support insider builds
how can i backup my Skyrim game since its modded?
nvm i got an idea
which one?
its called overwolf i use it for minecraft since they moved that off twitch -_-
oh
uninstall overwolf
follow that
alright thanks
ik
trying to re install minecraft, this shows up any idea?
Chrome
I can click cancel but if I open a new tab or wait a few seconds it pops back up
Repair your Microsoft store. Open an admin Powershell:
Get-AppXPackage *WindowsStore* -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
Are you using a VPN?
Not at the moment
Well it didnt work so imma scan my PC for a virus just in case
Yeah that sounds like a malwarebytes scan is in order
That'll check less common things like settings too
What exactly are you trying to accomplish?
@vestal ibex teach me how one uses ventoy pls
What part is confusing you? It's pretty much just run the tool and tell it what drive to use. There will be 2 partitions created, one large for your ISO files and one small for the boot loader.
those 2 things
i have no idea what those are for
or if they are needed
just slap the isos into drive root yeah not in the bentoy folder on the drive?
It recursively checks folders on that larger partition for valid ISOs
So you can sort it how you like
Oh cool
Boot drive for my nvme isnt an option in my boot settings
Can i please have help
Please
I don’t know what im even doing anymore
I JUST WANT MY WINDOWS OFF OF MY 1 TB SSD AND ONTO MY 250 GB SSD.
I used that macrium app and it made a disk image onto my 250 gb and I don’t know what to do ive deleted everything i have please just help me
@tepid silo is this sub active?
what
I need help who can i ask
You should've cloned the disk, not imaged it in that case
Looks like you already got help?
Why would you need to delete it
Because i didnt clone it and its taking up so much space in the image that i cant clone
I’m having trouble installing my OS onto my PC. (I have a MSI Pro B660M-A DDR4 motherboard) and I am trying to install my 64-bit Windows 11 software onto the PC, but whenever I try to start it it says “Allocate File System Resource Fail”
was windows prefviously installed?
No, sorry for the late response
Okay. I have recently come into possession of a brand new laptop (for school) from Best Buy. Its from HP. It has a ryzen 5 5500U in it. And windows 11 home but I haven’t booted it up yet.
What should my course of action be for it? Should I use the default windows installation or clean install? Are clean installs even supported on win11?
I intend to dual boot with Linux at some point, but I Have to use the ms office suite for these college classes.
windows 10 enterprise ltsc 2021
plus the linux distro of your choice
just boot from flash drive and wipe out the contents of the ssd
start fresh
Are you saying I should install that instead of the default 11?
yes
if youre gonna put in the time and effort to reinstall windows, may as well make it worth your while
What about activating windows?
Is there any way to go back to windows 10 but still be activated?
Or is activation a joke
Not if it came with 11. Keys only go forwards, not back. The exception is if it was an upgrade install, you could still revert for 10 days.
You don't need to activate Windows, though.
Ah yeah it came with 11
Here’s the question then: is there a performance difference between 10 and 11? And can I still attempt to make it more private with disabling Cortana and running the debloat script to disable telemetry?
Effectively no difference between 10 and 11 unless you're on 12th gen Intel with e-cores
And yes there's plenty of debloat scripts that work on both
Thanks fal. I think I’ll stay with windows 11, dual boot it with Ubuntu studio 22.04, and make a win 10 vm.
OH! One more important thing. Will I be able to put my sn750 in it and keep the license? Or do I need to keep the puny 240 gig ssd in it
You can upgrade the drive and still keep the same license. It's easiest to do if you sign into a Microsoft account so it auto activates.
In order to do that, do I install normally first with a Microsoft account? Do I have to manually save the license to the account? Do I have to prep the new drive any certain way?
It should have a windows installation and key already on the small drive right? Log into your windows account on that install and run windows update. Then you can swap drives, clean install on the new drive, and login again and it should auto activate.
Cloning is probably easier but then you have all the garbage bloat still
I’ll try it! I should disable S mode on the initial one right?
Yeah probably
I will attempt this foreign practice. (Linux user 🙋♂️)
Best way to debloat windows 11?
I used Rawrs debloater that's in the pins.
https://github.com/NeweggTechie/Windows-Troubleshooting-Utilities/wiki/Utilities
It's under General Fixes and Utilities for Windows.
I used it too! Very nice
I got TrueNAS setup and i got the openvpn server to connect to my SMB share outside my network however my school blocks the ddns services and somehow connections to outside IP addresses like my home one so im forced to use another vpn on top of OpenVPN and i can access my truenas web interface with the ddns address but i cant get to my smb shares
lol all credit for that goes to sycnex
my batch file just links to it and launches it
Your batch file makes it easy though, I just have to have one file.
But ok, the sycnex file was the win10 debloater, is it exactly the same for 11?
I have a question about my laptop. It is a windows 11 laptop.
On my other laptop, it had somehow baked into the bios windows 10 pro. Is there any way to transfer a license like this?
And have it still work on windows 11
OEM licenses like that don't typically transfer between hardware
If it was a retail key it would work
Ah
But waitttttt…. On the computer that is now my server, there is a sticker with a windows 7 pro key that worked to activate 10 pro. Would it work to activate 11 pro too?
There are currently no machines using a hard drive activated by it
It should work actually
Those old sticker keys work for 3 activations
Or 1 when you upgrade it
I bet it’s been used up then. Because I’m the third owner.
Not necessarily. It's worth a try.
And I’ve used up one activation for my moms old windows 10
I’ll try it. Thanks fal
It might not work if it's been activated to Windows 10 already. Better chances if it's not a Microsoft account, because if it is signed in the key is tied to that account.
I know for sure that I did sign in to my moms account when I activated it.
Will it error out if it doesn’t work? Or just not activate
Also, would it help if I use an offline account and have no internet at setup?
It simply won't accept the key when you go to activate it.
If you go for offline it'll still try to activate once you connect to the Internet.
Ok
I’m sorry to keep bothering y’all, but is there a benefit or downside to using an ISO image when installing windows 11?
Or is the dedicated installer best
It's identical. The windows tool just downloads and installs the ISO the same way.
yep
Epic. I will use the iso so I can put it on my ventoy drive
Hello there.
I bought a new pc and it came with Windows 10, but I'm getting the "Windows could not complete installion." message.
The mouse doesn't work on start up, but works fine in BIOS setup. The mouse not working is making the typical solutions to this issue impossible.
Can anyone help me, or point me in the right direction for assistance please?
I am having a issue with my AfterBurner Software since I updated my GPU Software it wont let me turn on my Fans to 100
DDU should fix that
Already did that with the AMD Software: Adrenalin Edition an installed 22.5.1 an it was working last month then I updated it to 22.5.2 an thats when it stop
an here is a pic of the Afterburner that is showing me that i cant use my fan speed unlink Fan 1 an 2 link same-thing
Well it's probably either the current version of AB or AMD drivers. Roll the driver back and see if it fixes it.
I decided to do a fresh install of windows, so when I opened the windows media tool and told it to wipe and reinstall it restarted my pc, pretty normal so far, the only issue is that I no longer am able to get into bios or have a display. My pc just booted into nothing essentially and my monitors won’t go out of hibernation. So is windows installing? Or have I just soft locked myself? Sorry for the run on sentences and if this made no sense, hurriedly typing this all out on mobile isn’t fun
Clear CMOS, you likely have secure boot on which will prevent anything except the windows install from booting.
How do I format a SATA SSD that is plugged into the PC as the only drive? I want to install Win10 on it, but the usb install media won't load first.. even though boot priority is set to that in bios
so I disabled the drive in the boot priority and the usb is still at the top.. however when I power on the pc, it just goes to bios and doesn't seem to even want to try to go to the usb
nvm I got it figured out
thanks for the help everyone .
😄
Out of curiosity, is there a way you can install Windows 10 through a SSD on an adapter?
Asking because of this
I'm basically running it through my laptop with a boot media tool, but I'm at a loss atm
And for context this is the adapter
Yes, but windows will not boot off an external drive. You could set up the drive to essentially continue the installation once it's connected internally.
Ah, would that just be installing the boot media tool on the drive?
not really windows to go is dead
Or how do I get those first steps started?
just put it in whatever pc u wanna install windows to
and then boot off the flash drive and install
unless ur using the ssd as the thing to install from
onto another drive
Downside is that I'm doing this for a friend, so I was hoping to get this done
And yeah it's basically that lol
Tell me what ur trying to do exactly
Install Windows 10 to a few SATA ssds for some friend's builds
This is one method, basically has you create a partition to boot the installer from to install to a larger partition, then resize the disk later. https://www.bleepingcomputer.com/forums/t/619313/clean-install-windows-directly-from-the-hard-disk-drive/
Clean Install Windows Directly from the Hard Disk Drive - posted in Microsoft Windows Mini-Guides: Clean Install Windows Directly from the Hard Disk Drive
You want to install Windows but you can’t use a DVD or an USB for whatever reason?
This tutorial will show you a method that will allow you to boot and install Windows directly from the hard d...
I would just install onto one ssd
and then use macrium reflect to clone many times
Also sorry Rizen I replied to the wrong message a sec ago lol
just image the drive and restore as many times as you need
Gotcha gotcha
I was hoping that this would be easy lmao
Thanks for the help though. This at least gets me somewhere
it is
just install to one hard drive
put it in the pc for now and install
easier
then you can clone to other drives externally
using either a disk image or just clone feature
Yep. You can run the installer to one drive by swapping it into your laptop, then just copy that drive.
that way u can clone to as many drives as you want simultaneously pretty much
Thing is I don't have a screwdriver XD
I also don't think my laptop has a 2.5 inch bay either, so that's why I was hoping that I could do it through USB adapters
So we're back to this. It'll require your friends to run the installer, or you can do it for them.
then i would purcase an 8gb usb flash drive and use it to create an installer
and tell them its their problem
Yeahhh, that sounds like it
8gb flash drives are fairly cheap so shouldnt be too much of an issue
It isn't. Just I was hoping to do this while I was at work
But best I can do to help him is format the drives
the installer can handle that too btw
it has a format feature
just hand him a flash drive with windows installer
I find it best practice to tell windows to install to empty space anyway. It avoids some persistent bugs.
In this instance it can't. Basically my friend formatted them on Mac, so they're using the exFAT format, and that can't take boot media
So I'm reformatting them to NTFS
You can just delete the partition
windows reads exfat
It reads it, but it can't make boot media from it
also the installer doesnt care as falcie said, installer has a delete partition button
u absolutely can
the media creation tools first step is a format
It's just one extra step
as long as it has an assigned drive letter, which exfat should, its not even an extra step
the extra step is added if the drive was formatted to apfs or hfs or something like ext4
Yeah, it comes up with this prompt that it needs a driver, saying that it can't use the disk otherwise
If I had access to the computers he was messing with, I could show you what I mean
i mean either way the installer picks up all drives
and has a delete partition option
itll just say it cant identify the format used on the drive
itll still allow u to delete
Yeah, that's the message lol
If that error is showing during the installation and it's not showing the disk at all, that's a separate issue.
Well I'll try that next time, and it shows the disk, but doesn't install to it
If it's showing up like he said then you can absolutely just delete all the partitions and tell it to install to the empty space. It'll make whatever it needs.
if its erroring during install its either corrupted installer or dying drive
I'll let him know then. He's been doing some other method that I can't recall lol
https://github.com/NeweggTechie/Windows-Troubleshooting-Utilities/wiki/Create-A-Windows-Bootable-And-Install-Windows-10-11#6-choose-custom-install-windows-only-advanced-option-here-hopefully-you-had-disconnected-all-the-unecessary-drives-so-you-will-se-only-2-drives-your-usb-drive-and-the-drive-you-want-to-install-windows-to-choose-that-drive-and-hit-next-format-the-entire-drive-in-advance-if-you-have-used-it-before-or-click-every-drive-partition-and-hit-delete-in-this-step
Just before that step, just click every partition and click delete
@vale roost just send him this
Will do. Thanks again for the help guys
np
Windows question here because I don’t have a windows install to try this with: can you edit and save documents to your local machine from the browser version of Microsoft office? Or only onedrive
Only OneDrive although if you have your OneDrive account linked to the pc then you can have it on both kinda
Hmmm. Because I was wondering if it would work with Linux
Or my openmediavault server to save stuff on
Yeah. I don’t think I have any onedrive space from ivy tech, but I might have some free stuff my windows install gave me
When using OneDrive in windows it shows up like a regular folder, just with cloud and local icons to show if it's on the PC or not.
You can mount OneDrive on Linux too.
Mounting onedrive on Linux might be nice. But according to google the document has to be only In onedrive to edit it with the online editor. I will experiment though.
I also found something very cool:
It’s in a vm, but they integrate with the desktop
And on my laptop, I have 6c12t and 16gb ram. I don’t think I’ll begrudge a vm
If I need windows license for a build will an online cd key work
Usually yes
So do I get the key and put the code into the motherboard settings when I start it up
When you go to install windows it'll ask for the key
So when it asks for the key I can just put the cdkey in
Yes
Ok what is a safe site to buy a cdkey
Besides the official channels, we're not supposed to discuss that here since it's technically grey market.
Same I also don’t have window
Good. But in case you have the same question, you cannot do local files
Oh
How would I start a vm?
anyone know how to get rid of this art? It was not there a couple days ago?
just disable the windows search box altogether
waste of taskbar space
already found the solution
Do u have one created?
If you want to make a vm, first you’ll need some software to make on in. A popular one is VirtualBox.
You can use the windows/linux sandbox which is what i would do unless you need persistence then use virtual box
After installing fresh windows 10 it blocks on the loading screen, the dots stop rotating and pc does nothing for over 20min
Tried many times, it stops always on the same point
What could that be?
Corrupted installation?
Hey guys! Got a weird one for you!
Late 2012 iMac, windows update is DETERMINED it supports windows 11.
It does not.
Here's some pictures.
The computer then CONTRADICTS itself afterwards! We don't know what to do here. Any tips?
Windows 10 is running standalone (there's no MacOs installed on this machine) with Bootcamp 6.
Stuck here, this is the loading screen before windows asks you to set things like user, psw, preferences,...
What ca I do?
Probably corrupt like you suspected, try using another boot stick creator method
Redownload your ISO?
Are there advantages with MBR GPT, UEFI or LEGACY
For modern Windows you want GPT and UEFI
You can check using the command window in the windows installer
I'll do the installation once again and check everything
I think it was alt+F10 to bring that up
Then you can use diskpart to show drive info
Or should I try installing win 10 home instead of pro?
What are the main differences
Almost no difference...
Nothing most people will care about at least
Yep
Trying with 10 home
Maybe that should work
Probably will have the same issue
Btw alt+F10 does nothing...
Shift F10 mb
You can convert a disk to gpt with diskpart too if it's not already, no data loss involved.
Another thing you can try if it still doesn't work is deleting all the partitions and telling it to install to the unallocated space. It'll make what it needs to.
I tried installing in unallocated space but the problem is the same
Now I'll se if it is gpt
You just need to
diskpart list disk
An asterisk under GPT is what you're looking for
That could have been it, since UEFI does require GPT usually
Thin client gives headache
Problems everywhere
I thought I could have just installed win 10 in a few minutes...
Oh right it's the thin client you're working on. You might need to load a driver at installation.
And its been hours
...
Mmh
I'll see if windows now works with gpt or I'll need the drivers
You mean drivers for SSD?
Do I check website of the two products?
And download it on usb stick?
Yeah the support site specifically
Just need the model number
lmk if you have trouble
Download the latest drivers, firmware, and software for your HP t630 Thin Client.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.
You might need to manually select an OS
HP drivers usually come in self extracting zip executable files. You can run it and select where you want the drivers extracted to.
Cant even find SSD drivers
↓ this is the SSD
https://amzn.eu/d/b139lK8
L'SSD di consumo della serie E100N è montato con l'interfaccia M.2. Questo prodotto è appositamente progettato per ottimizzare i sistemi operativi del computer e migliorare efficacemente la velocità di avvio e l'efficienza operativa dei sistemi. La serie E100N applica la memoria flash 3D NAND che...
Yikes I've never even heard of that drive lol
Usually most of the time they don't need drivers, theyre good like that
I'll just try the hp driver
Yeah most of the time you don't need a driver for the SSD itself, but you do need the SSD controller driver which is often included in the SMBus chipset driver.
Might as well check if the bios is up to date while you're there
Latest is Nov 2021
Probably a good idea
Yeah there was a bios addressing boot issues in 2019
And another addressing hanging later that year
😐 if that is the problem I'll hurt the thin client
Now there are many files in the usb stick, there is a batch file (is that the one I'll have to open?)
It's called "launch"
In the windows installer tell it to load driver and point it to the folder that has DLL files
But these are for bios, I should go there and select bios flash update
Yes
It says the file is missing or could be corrupted
If it still doesn't work you can create an ISO specifically for the embedded OS using this https://support.hp.com/gb-en/product/hp-t630-thin-client/10522151/document/c05480006
This document includes an overview of HP ThinUpdate features and offers instructions for downloading and installing HP ThinUpdate.
It should be the file in the bin folder you want to select as the update file
There is "bios update policy" but I think thats another thing
Does that help me with bios?
Wait...
Uhhh
Do I have to keep only this file? Because the client apparently can't see the usb drive
Or are all the other files necessary
The drive is fat32 right?
Drivers for SSD?
I guess it requires the USB to be specially formatted using their recovery usb creation tool, which is located in the win folder.
Update started correctly
It now tried to boot into windows since it was installed but it stops on the same loading screen
Looks like it requires the IoT embedded iso
Idk... I'll try that tomorrow because I'm tired af
Nothing wants to work, I'll install windows one more time, if it does not work I'll try again tomorrow
Ooohh boy that IoT OS looks like a PITA
Huh?
It's basically a super stripped down Windows 10
IoT core doesn't even have a UI
IoT enterprise does though
nothing works... "installed windows" and this time after it completed and reached 100% installation it just go back to the installer and didnt even put any files into the pc
i'll do it tomorrow
bye
Is there a way to get this to show up on all my monitors?
Nope