#overclocking
1 messages Β· Page 23 of 1
z590 pro ax , 11700k
Maxmem will help
it did 4800 4dimm just fine
yea i donβt have djr, i should have some in the way kinda soon tho
20-26-26 lol
i wish i bought bdie
You won't need vdd for frequency either tbh
I wish you bought anything but RKL
free board
chip was also free brand new
10900k
booooooo
Could have sold it and gotten golden cove
iβll go to ddr5 on 13th or something soon ish
i need a real graphics card first
why 12500
interesting
All locked 12th gen cpus can be OCd with the right boards
13th is locked though
But it doesn't matter much since 13th low end is ADL
not guaranteed adl anymore, at least some 13400s are rpl
some are RPL, others are ADL, no speed difference though
i dunno, lots of reports are saying that is whats up
is this normally a thing on 10th gen?
i postpone my gear2 tune for a bit, im gonna further g1
per core?
no, just a v/f curve for all cores
i believe its normal? see if it does anything
if its 11th exclusive it wont do anything
I had it on my Z590 iirc
Gonna bring this up again? It seems my trcd isn't splitting even though there's seperate options for it?
I'm pretty sure they're just linked. It's separate on AMD but should be joined on Intel.
If it's left in your bios like that it was likely a mistake
That's what I thought but i though someone in the OC disc said they weren't on lga1700 anymore or something
Actually there's a possibility that it was being set before i was just reading off of asrock timing config and they only have trcd timing that shows
They are linked on Intel. This was explained to me when I was OCing my ballistonx
well yes but actually no not on lga1700 apparently they split
hm, maybe I'm thinking of
example 3200c14-(14-14)-999
The ones in the () are linked.
So changing the the 3rd timing doesn't do anything. It just defaults to whatever you have the 2nd timing
youre thinking of the right names, just apparantly theyre no longer linked
Since when?
lga1700
I oced on my 12600k
and I was told that on 12th gen they are linked
by..
Ggood or Mushy
from asus mem tweakit
(im currently working on the timings still)
no but i can decouple them
also like everyone on the OC server is saying so
How? I woulds likeee to knows
F5-7200J3445G16GX2-TZ5RK
Does anyone have these sticks?
Bruh they barely want to run 7200 without retarding the timings
Not my MOBO either
I don't have those specific sticks but those will be hynix A gskills
Run like trash
Which mobo tho
Yeah try rma them
No way they wouldn't run some decent xmp on a kingpin
Not at 7200 anyway
See i was thinking could be my IMC
Maybe?
But idk
in bios theres 2 seperate options trcd and trcdwr
This is a 690 or 790?
790
Yeah no way
New sticks then yeah?
should i disable memory context restore for ocing mem. I feel like it would be best to have the system re train ram every time
i haven't ever found this to be helpful personally
the default setting (retrain only when changing settings) should be fine
is that the "auto" mode
yeah
ok i keep in on auto, gracie!
my mobo splits it into two settings
retrain on settings change and retrain every time
so i keep first one enabled and second one disabled
im on msi we just have enables, disabled, and auto
x670e
don't remember exact names of the settings
hang on let me get into bios
yeah thats a thing, do u happen to know where it is in bios
well yours may be different
i dont have fast boot so im good
but anyways back to the context restore
idk what auto actually does, it doenst specify
"when possible" just means didn't change settings
ahh ok, they should be more speific so thanks, ill enable it then?
yeah it shouldn't cause problems
as long as it retrains the memory after changes
cool, thank you
np
meanwhile you have brain damage
Wubs
Hmm
Those are some timings
any other am5 folks have 2033 FCLK cause BSODs in windows. I think that might be my issue im gonna retest with it set to 2000
its weird cause I run testmem5 extreme1 and it passes no problem, but once I reboot
MEMORY_MANAGEMENT
FCLK issues usually trigger WHEA_Uncorrectable_Error messages
When you're testing memory have hwinfo open watching for WHEA errors, it's the last thing on the list
ok will do
I think it was prime95 largefft that was good at finding fclk errors
yea, was just testing highest freq
3442 aint bad
average hynix djr timings
Is there rev.e DDR3?
we're making fun of garbage ddr4 ic's
Hmm yes there's 2Gb samsung revision e but it's trash too
Well, "trash" in that it'll scale but not well
Yes I figured, and that sparked a curiosity in me
Did some undervolting
0 power, black magic :o
what are your primary timings? I was only able to get 6000 30-40-34-94
howd u get that last one so low lol. I error hard in occt at 92
Intel things I think
got it down to 30-39-34-94 lel
yea the last one is 2R bdie
if i am seeing performance regressions when lowering tRC, does this mean i should raise it back up?
Yes
got it, thanks
So itβs an AM5 thing too, damn
yeah
new linpack is the hardest thing ive tried as of late
That plus the new ycruncher VT3 sounds like the ultimate stability test. BZ was saying he might have to do a positive CO at stock to run VT3 stable.
iS tHIs ThE NEw cRiSis?1?
its the new floppa
If you need ultimate stability for, say, a server, you want to test under every worst case condition
If It cant pass stress tests stock, its broke
tbh bz and stable though..... if you need to positive offset, then you need to rma
He has repeatedly said he's gotten some of the worst IMCs he's ever seen in a 7000 chip, and he's got multiple bad ones lol
Although he did just get 8000 more stable on his 7900X than Intel
Since Intel invariably errors eventually but the 7900X didn't
I'm 99% certain that's clock stretching and/or not reporting the errors due to it having worse performance than the normal ~6000-6600 that was previously max stable
okay, so same as intel with gear 4
Yep
zzzzzzzzzzzz
It was a snooze according to him too lol
Just adjust VDDP and it posted and was stable
My Patreon: https://www.patreon.com/buildzoid
Teespring: https://teespring.com/stores/actually-hardcore-overclocking
Bandcamp: https://machineforscreams.bandcamp.com/music
Twitch: https://www.twitch.tv/buildzoid
Twitter: https://twitter.com/Buildzoid1
Facebook: https://www.facebook.com/actuallyhardcoreoverclocking
#ddr5 #amd #ryzen #overcloc...
On a 48GB kit at that
tbf that's just xmp for 2x24gb
Correct, that was xmp
But the difference is that Intel isn't stable at that frequency even without tuned subs
it is if you run gear 4
You will eventually get an error, and it's often really late into testing. Like 12-36 hours into testing.
Which if you're running benches can mean you fail a crc running ycruncher, then run it again and it works
thats cause g2+ instabilities can never be fixed
huH?
ive passed vt3 for like 3 runs and the bsod'd after an hour or so of minecraft
Actually schizo oc
Minecraft is weird man
Some reason any java 17 versions of minecraft dont work when i have 100mhz bclk lock on
Basically anything 1.18+
big numbers
Huh. That's one I haven't seen before. When did that come out?
like a few days ago π
That explains it
Time spy 
temp sensitive rev.e got me like oooaaaah
i have peaked
all the garbage ddr4 i've oced has led up to this moment
8x 16Gbit defective (unstable at jedec) spectek ICs in one channel
16x 4Gbit working hynix ICs in the other channel

Yeah its a 30 dollar rk clone that I slapped and Asus sticker on
oh thank god i thought you got an asus keyboard
almost got me there
π
see i have an rk keeb its just not an rk keeb at this point
I want an rk
My sister has one
its nice
mine feels and souns cheap
mines modded ultra mega
Legit just have me build one for u
But thats pricey
WHAT DA HECK, YOUR IDEA WORKED @short blade
I can't believe the IMC stuff was the one at fault, I really didn't know. I thought 1.15v or higher is considered stable on VCCSA and 1.3v VDDQ. Bruh I've been wasting hours away from this if ONLY I ASKED SOONER!!! The only question is, since the VDDQ/VCCSA changed... Should I retest on HCI memtest?
(This is on 3600mhz tune btw)
@finite frigate
Sorry I can't take proper screenshots, I'm running this on a flash drive and didn't want to install anything else
Gonna do another VST stress test and finalize it
congrats, you owe me lunch now
lol
Time to get beat up
your WTR's seem high
oh
nope
what die is it
i cant really say
what sticks
Silicon power Xpower Turbine 32gb 3200mhz CL16
last i remember when i loaded up typhoon burner and it mentions A-die
16-18-18-42 i figure?
i really dont want to
especially what happened last time
it looks like it can really fail if i tweak primaries even down 1
i was actually thinking about raising the clockspeed up to 3700mhz after 3600mhz success
just to level it out
i mean if youw anna be safe for testing, jsut get some garb hdd/ssd or usb stick and put windows+tm5 on it then discoonect other drives
yea thats what i did
i used a samsung 256gb drive for windows 2 go and it doesn't detect the other drives
which is good
I lost data on it TWICE
so i have a windows iso backed up
lol
i thought it was fine really, like my voltages weren't borderline crazy
all i did was try 4000mhz CL17 and then everything went to crap
lost everything
who knew that being scared of trefi data loss ends up losing data over a primaries tune
funny...
i just reinstalled windows, but before that, my daily os had see thousands of errors and frequencies of over 5000mhz and never had real issues
alot of factors came into play, i think even how dangerous your settings looked you were probably playing it safe still, i didn't know much because im still new to ram oc
and a new architecture
definitely wasnt taking it safe π
before i reinstalled this was the OS i took 7zip 3rd and ycruncher on lol
did you get this yet? you have 1 more day @finite frigate
lonk?
they restocked the keys
eeeeeeeeeeeeeeeeeeeeeeeeeh
lol
only real worth game there is assetto
aight
back to overclocking
right now imma run the system as normal
then oc the ram one more time to 3700mhz and do overnight HCI memtest testing
followed by OCCT
if both passes then i may tweak the rest of the timings
sadly so
i cant believe i came back even though i vowed to stick with XMP
this is a CURSE
why is the latency so wack? @finite frigate @short blade
is hyper-v/mem integrity really messing it up?
definitely could be
darn
i guess i could try it again on BenchOS (my usb stick)
meh maybe later
still i cant thank you enough for saving my time and sanity
π
lemme run aida on my 3600 tune on daily os
could thank me with lunch
lol
maybe i should use a drone to send you lunch

probably cheaper than doordash
getting a 1 person meal delivered in cali costs more than a 1tb gen 4 nvme lol
WHAT THE HECK
I don't know how to describe it
it's like
squealing in multiple changing pitches
I guess it's coil whine dialed up to 11
it's very noticeable but I doubt my phone mic can pick it up properly
i see
i dunno if i actually experienced coil whine but one time i heard a high pitched sound from a psu on my brother's now dead pc
it doesn't make these sounds under any other load
regardless of whether it's a cpu test, ram test, or both
interesting
alright imma play a game and check frametimes and such
obviously not all games are ram sensitive but the 1% lows may be increased
...what
i don't think i have hypervisor on
i definitely don't have memory integrity on
this new daily im doing is killer
nice
also 1% lows is pretty good
mind you this game is played on an HDD
not ssd so still some stutters but not very noticeable
im too lazy to measure avgs and stuff
id say do it for ram purposes
i know my ram is good π

listen man if 40k% in mtp and 5 passes of anta +3 of pcb destroyer isnt stable idk what is
my 3080 seems to have a crazy good core
laughs in raptor lake
you went up on boost clock?
not bad not bad
and it still doesnt hit 120fps on tarkov
thats pretty good out of a 3080
the temps i envy
GYATT
imagine putting that on a 6700xt
bro that thing would be a chilled gpu
probably 50c max load
or way less
LMAO
prolly
this cools better than my 2070s despite having a slightly thinner cooler
but it is wider
well, longer
go for it
and cpu tune is diff now
UV is the way
lol
probably got this
kaby latency>
safe mode lol
Bros running ratchet and clank on a hard-drive
Isn't this one of the games that like strongly recommends and ssd
neat
yes but it runs
Hmm
In a few lol
And are we actually gonna play nfs this time
Or sit and find a game for 2 hoursπ
we actually playing
everything worky
Okay cool
ping me when ur ready
cweamy
Okay cool now buy me one sweet thing

worried about the stonks π
gonna wait a week to spend it and call it good
I wonder if mainstream phones will ever be overclockable/undervoltable
sales guy at t-mobile was telling me that the s23 can be overclocked
my eyes went wide and I was like... what about undervolting?
turns out he was using "overclocking" to describe some automatic settings tweaks
dailying an undervolt on your phone would be so cool
You can with root access
Since forever
i might have to get back into rooting lol
last time i cared much about phones was middle school
is it just clock speed?
no voltage control?
There is a risk of bricking and permanent damage.
Correct, only clock speeds
i would be more interested in undervolting
potentially more battery life without performance loss
sounds ideal
It appears the only thing you can undervolt is the ram but you do lose performance
There's conflicting reports though
Custom kernels can unlock voltage
sounds like quite the rabbit hole
Indeed. You'd have to rely on the community to provide a kernel if you don't have the skills to do it yourself. And that's assuming your device is unlocked enough to change the kernel. (Pixel ftw)
this is my first samsung phone, don't know anything about samsung
it came out like 5 days ago so i kind of doubt there's much for it yet
SeCuReD bY kNoX
i just remember back in the day i didn't find anything for my LG G4 and LG G6 so i lost interest in android modding
LG is really locked down too
That's honestly part of the reason I went pixel, I got sick of the BS. I want the option to control my device how I want.
What if I told you my battery lasts for almost 2 days between charges with light use
my LG G8 was beating that
then my gf got me into pokemon go and my battery life was never the same
@short blade i checked safe mode with IMLCGUI and I can't believe its around 64 nanoseconds, i thought the tune was alright but it wasn't. Stability wise, its fine for sure but performance isn't all that great. I tried messing with trefi and setting it to 32768 but i got errors, also setting trfc (not 397 but higher) also gave me errors. Though those two timings definitely got the biggest impact on my ram it just cannot be changed. Anything i should do?
Aside from that im slowly leaning on rooting my oneplus nord n30, the phone's 1 month old now
More voltage can help some dies with tRFC scaling
might go to a 420+new case+new psu
Thanks
I wonder which tho, is it VCCSA, DRAM, or CPU VDDQ
dram voltage helps with trfc and trefi
do you have c die?
Not get scores
do you know if thats a possibility
A die according to typhoon burner
samsung A?
I daily 1.52v
No
hynix?
Lemme go and check again
DDR4 spec requires up to 1.45v to be non-harmful
i have 2 tunes
3733 1.55
4400 1.6
i might buy 2x16 bdie tho
idk what to do with this money, since i got a free 3080 π
DR b die is so hard to find without breaking the bank tho
@finite frigate
im probs just gonna ask forks
open CPU-z and screenshot the memory and SPD tab
If it really is Samsung A then I'm sorry there's nothing that can save you lol
better than c die actually
Probably hynix tho
more than likely

Enjoy researching this
high trc, normal xmp, sounds possible for hynix

So hynix a-die 22nm?
What can it do if it is?
makes their own dies
π
theoreitcally
This type of ram isn't well documented enough for oc
no way you have chang die bro π
"Theoretically" being the operative word because it wouldn't be the first time China sanded off a label
i'd watch how voltage scales, more voltage doesnt always mean better, try going to 1.42 and see if it scales
etc
I'm done with it, already did final test of HCI 12 hours
If they followed DDR4 spec it should be safe to go to at least 1.45v
Gonna focus on UV cpu
apparently this is like a real brand on the rise in china
I tried changing voltage to 1.45v many times before, it doesn't do well
Reverse scaling is possible in some cases
VERY possible
Like C Die and bad pcb
it wouldnt make sense for samsung or hynix-a tho
but idk
changxin says they do 19nm dd4 production
not 22
Thaiphoon being thaiphoon
No me don wanna
Running a crazy ah undervolt on my overclocked 13600k
1.162v at 5.4ghz pcore
Doubt it would run this time
Heh it crashed
i found 70$ dr bdie
Nice
might buy that next week lol
3200 14-14-14-34 1.35v
ugly as BALLS kit but its cheap
Low bin but definitely b die
Oop
HP bdie
i found 85$ dr bdie yay
and its old stuff which can be amazing or awful so we'll see
the tune is slowly getting there
well you shouldn't expect to get the same scores as b-die
at the end of the day this number doesn't matter
play games
ok
if it's good in games then you're fine
aight
we're running very different timings lol
well yea heh
YES IT DOES
πΏ
bleach
im buying bdie
and x99
π
and a 1000w g2
maye not x99 but the rest more than likely
2x16?
nice, we can compete then
both 2x16 g.skill 3200c14
lol
mine are tridentz, im putting my ballistix heatcovers on them
trident z sink is too high
why?
interferes with aio
oh
i cannot use any dimms higher than ballistix
i'd send you my ddr3 heatsinks if i wasn't already sending them to alec
then again ig those are too tall too
do you have space for ram fan?
should be good
1700rpm like 95 cfm i hope so lmao
i got temp related game crashes from b-die hitting 45c in cyberpunk
π
open case
lots more airflow with only 2 dimm too
gpu heating it up a lot even with open case
can't even undervolt the 4080 in cyberpunk
truly need to squeeze out every last drop of performance i can get lol
im on a 300w max undervolt and like 250 in games for my 3080
the 4080 averages around 320w in games with full tilt oc and 420w vbios
voltage limited
can get it to exceed 400w in synthetics but it won't in games
even path traced cyberpunk lol
meanwhile my 3090 strix thermal throttling in games at 3000 RPM if i don't run a huge undervolt for daily
600W
the difference in nodes and coolers is crazy
3090 strix looks like an itx card next to 4080 tuf lol
what are you using it for
daily profile/per core oc's
you cant set any higher than 4.9 and have it acutally work
if you set 5.0 it just does 4.9
lowkey awful
well, to be fair that's not really the intended purpose
it's called throttlestop not throttlestart
fair π but its all i have besides XTU to set cache voltages cause gigabyte sucks
I know for 13th gen ring just uses vcore
but throttlestop still shows a cache voltage option
very interesting
wonder if it's just raising vcore or it's doing nothing
intel autos high vcore to make up for ring voltage requirements
yeah I think my 5.0 ring is requiring more voltage than my 5.6p
so if you set low vcore, but leave it on adaptive, itll auto 1.4 at 4.1 ring
but if you set cache voltage in throttlestop it actually works and runs at the proper amount
also requires more voltage than 4.4e
yeah
yeaaaaaaaaaaaaaaaaaaaah
maybe there is cahce voltage in here
and its just not named ring/cache
did you see the progress on my test bench ram lol
nah
You can't go higher on ring?
bro...
LOL
5.0 ring is already like 200mhz above average for daily
I mean if I do 50 surely you can go higher (right)
you can do 5.0 ring on a 12700k?
Yes
are your e-cores disabled?
HUH
i have igpu and e-cores enabled
Igpu forces it down to 3.6
damn i thought alder lake was sitting at like 4.5 ring with e-cores enabled
anyways, i actually use my igpu
so i'd rather not disable it for like 100mhz more on ring
This is what I daily
I used to till I noticed it dropped my ring like mad lmao
well, i doubt that disabling it would get me to 6.4ghz ring lol
6.4 π
Oh my that's some fast cache
π
youre an oc
straight up iff my dimm slots were like 2mm lower i wouldnt have ram compatibility issues
I had that problem. I sanded off that edge of the fans and it was good.
i cant do that if i buy trident z or somethin tho
i figure this is bdie?
16-16-16-36 1.4
i dont see anything else it could be
Not with that attitude, just cut more fan. Dremel solves everything.
Yes that's b-die
id rather cut the dimm tbh
i want a 4000 kit of 32gb bdie for not 2 million dollars but i cant find much
Not gonna say I told you so but...
isnt that like the worst form of bdie possible
lpx, high cl
cheap though
and lp
The CL is a nonissue tbh
I have a 4133 19-23-23 kit and it works great
It's unfortunate that the most reliable way to tell is going to be corsair version number
of bdie?
yes
do it clock swag
I'm on ryzen so I didn't go for max clocks, but it did 3800 14-13-13-28 at 1.5v
When I did push the clocks it got up to 4400 pretty easily but beyond that is just ryzen issues
i wish he could actually confirm its bdie
corsair doesnt follow their own stuff
i could buy with paypal and get a refund if its not tho
True the version number isn't 100% reliable but the only real way to tell for sure is to delid
since he advertised as bdie
Yeah "item not as described" since he does say b-die
Overclocker special, trash heatsink but good if you redo it https://www.ebay.com/itm/256175875783
Not dual rank but at least it's 32gb
You could bid on this one https://www.ebay.com/itm/204431330574
Risky-ish seller tho
i was looking at this
obvi bdie, and low profile so i wont have to delid
basically that or lpx
old bdie
SCREW OFF WITH THE LPX LMAO
oh my they come with a cooler
π π π
super old
and its red too
π thats worth it
plus ram fan
i cant use it
Again, not with that attitude
i have 0 ram clearance
Best way to sell lpx, sell a cooler bundled with lpx
i have this anyways
the best way is saying that its bdie while im in the market for bdie cause i got a free 3080 on accident
and its small which also makes me want to buy
I'd wait a while to see if that wasn't a chargeback error
from the people i bought it from?
people i bought it from said "no money was deducted from our account"
paypal has no record of it ever comiing back to me
So maybe the bank refunded on accident?
i go through cashapp, not really a bank, also no record of it coming back LMAO
So they never deducted it?
im still going to wait, but all signs kind of point toward me getting a free 3080
essentially, bought a 3080 for $409, all went well the card works fully. 3 days after itβs delivered i get a notification from paypal saying my $409 was cancelled, but i literally have the card, but i also got the money back, i messaged the seller about it and he said that no money was taken out from their account
the payment went through fine, i didnt have the 409$ until yesterday
Idk I've just been in that scenario before and especially if the bank is involved they get hella stroppy
Delidded for your convenience https://www.ebay.com/itm/394582301877
i saw this and its weird
I wouldn't say it if I wasn't tryna be a friend lol
yeah, im waiting lmao
i'll give it a bit, like a week

well, i suppose that's a wrap
ended up using SOC OVERCLOCK VID = 58 to undervolt vsoc lol
@finite frigate @ancient bridge @wheat lintel
the potato is done
Gtfo
dude this SOC OVERCLOCK VID setting is so weird
wanna take a guess how it works?
This poor 1500x
poorly
Single channel is the way
how "58" translates to 1V?
is that like hex
Ew
yeah i have to enter 58 into SOC OVERCLOCK VID and set "Dynamic SOC DVID" to "Normal" to get 1V
lmao
how awful
SOC OVERCLOCK VID field is number of offset steps (in hex) from SVI2 max (1.55V).
48h = 72d -> 1.55 - [72 x 0.00625] = 1.10V
50h = 80d -> 1.55 - [80 x 0.00625] = 1.05V
58h = 88d -> 1.55 - [88 x 0.00625] = 1.00V
thats awful
Hex
I love it
imagine being a beginner overclocker on that board
so imagine if you decided to try 0 thinking it's the safest option and then fry your cpu because it goes backwards from 1.55V LMAO
We love hex overclocking
Ds3h is the best
what's 1.1 in hex
My laptop was entirely in hex π
wait
if i have to hex oc ever im uninstalling life
i'm dumb that's just 1.1 anyways lol
i'm thinking about binary decimals
is it?
idk i just woke up
LOL
Itβs like 1.19A or something
π bro woked up to check his ramoc
don't worry there's a menu to do my timings in hex too
So real
NO
Once you get your AMD laptop, get ready for some hex
why are the timings not awful
Those 4/4/10 tRRDs/l/tFAW go hard
YES
i don't think anything can get more cursed than this board alec
Biostar
What
Bro
On amd it will shove voltage
this is the entire voltage menu
Hence the 1.55V 5700G
3 options
Is the 1500x 4core?
yes
Yea
theres 14 voltage menus on ds3h
Now, any good for geekbench6??
no
no
it cant do mem
Fair enough
me
Itβs where you should be
π
β¦why so much???
yummy poison consumption
im not actually...yet
Go DJR
undercoating
SOC OVERCLOCK VID 60 lol
OK I WANT REAL TIMINGS THO
He's mildly slow
new phone moment
i also dont want to overclock hynix
Djr fun
yeah if i want a frequency record
Exactly
i dont
Smh
alec can i go to poland wit you
Iβm literally leaving Poland in 3 days
not my problem see you soon
Sure come over then
did you catch some pokemon
bleach did you see what i purchased :3
you're not allowed to leave until you have a 15/15/15 shiny mega rayquaza
no what is it
Iβll trade you my RMX1000 for it
the big watts
mmmmmmmm youre actually enticing me
by all cables it doesnt mean all included cables
it means
every port on the psu
has a cable in it
for some reason
so ill have like 40 pcie 8 pins
considering i was gonna just buy an 850 g2 π
thinking back to when I ran a 3080 + 3070 on 650w b tier
G2 is a tier right?
a tier yeah
i cant bench on a 650w a-tier
Iβm running a 5900x and a 3080 on a 750w
transients+300w cpu=ocp
(just barely though)
i hbad no need to buy a 1300w
but
90$
thinking back to benching 13700K + 600W 3090 on TXM750
without it shutting off
ocp limit prolly higher than my unit
I remember that NZXT pc I bought way way back that came with some bomb 750w and a 3090
That was fun
it was like 1000W/83A
Bought it just for the 3090 in the middle of the shortage, sold every other component
g2 is so old i cannot find ocp limit info on it lmao
2k for a 3090 PC during the shortage
If you ocp that thing you have bigger problems
my best shortage prebuilt deal was $800 for a 3700x, 16gb, 1tb, 5700xt, rm750
my 1080 was 180 during the shortage
My worst shortage deal? My 6800xt for 1.4k
worst "shortage" (was just the beginning) deal was my 280x for 80
"1.43kw efforlessly" LMAO
Dual 1000W vbios modded cards while also being completely incompetent at overclocking
my worst storage deal was trading my msrp 3080 + $650 for a 3090
the +32 mh/s still paid for itself in the end though
since the vram on that 3080 was borderline defective
lmao
im going to have a very happy computer
(runs undervolt anyways)
Oooh I should buy an EVC
As you should
Iβm taking apart my pc soon anyways so might as well
for 35 no brainer i should too
probably on the gpu, cpu i want to run 5.2 at some meme wattage or something
1kW PSU should handle a 13900k and an EVCed 7900xtx right?
Why would you evc that card for daily?

