overclocking

[signal belfry]

why would the +number change? it was +186 to reach 1980 mhz

now it changed tho to +231

[dull ginkgo]

At different places on the v/f curve

[signal belfry]

No

It’s on the same voltage if that’s what your talking about

I dropped like 5-6c tho from usual temps

That might’ve changed it I think?

[potent fiber]

Sometimes it changes a bit right when you hit apply, but also that +231 is in relation to the stock clock at that specific voltage square. In the future , show the voltage line plz.

[scenic vine]

Yeah, temps also matter when you press apply

Since it'll raise or lower the curve if it gets cooler or hotter

[signal belfry]

is this a good score for a i7 10700k?

it was running 5ghz and consumed like 230w

[static oasis]

Yes, 200 points more than average OCed

[signal belfry]

5.1ghz

[frigid cedar]

I don't know if anyone's looking to tune some samsung b-die but here's my ddr5 6000 timings for anyone who wants to try them

Aida64 latency of 56.9ns

[frigid cedar]

Oh it also squeezed out an insignificant boost to my last r23 score

[storm kettle]

can someone help me overclock my asus gtx1050ti?

[broken frost]

i mean

youre not gonna get much out of it

[storm kettle]

4gb

[broken frost]

max voltage slider, +70c and maybe like what

450 on mem

[storm kettle]

had it overclocked before but wasnt done quite good

[broken frost]

try that

[storm kettle]

what app?

[broken frost]

I use evga precision x1 but you could also use msi afterburner

[storm kettle]

ok

[zenith palm]

@storm kettle don't touch the voltage slider leave as stock, cards already give way more voltage than needed at stock, use msi afterburner and slide the power all the way over, then increase core in increments of 25, would start at 50, run 3d mark timespy until it crashes, dial back 25 until stable them try mem at +300 then increase in 50's til you notice loosing score or crash then roll back

@broken frost ^ if anything undervolt

[storm kettle]

ill check it out tomorrow, thanks

[limpid prism]

i have a i7 6700k with an asus z170 board. I have not messed with overclocking and am wondering if its worth doing? Are the performance gains in terms of gaming noticeable? Is it very risky? Same goes with overclocking my graphics card (1080)

[sudden torrent]

It's not very noticeable in gaming. You can go from 100 to 105, maybe 108 fps depending on the game

[limpid prism]

okay. might just hold off then. thank you!

[sudden torrent]

It can be fun to do just because

[limpid prism]

tru. i just dont want to break anything. any good guides you know of?

[sudden torrent]

Check the pins, there's links

[frigid cedar]

If you mean you don't touch anything in the bios as not overclocking something perfectly safe and stable I can recommend is finding your wattage limit in bios and letting your cpu access as much as it can and to max out your short and long turbo duration as a simple way to get a small boost to cpu performance also most asus boards have a feature called multi core enhancement or MCE that applies the single core turbo to all cores

Although be warned while stable mce applies high voltage so almost all binning quality of cpu can do it so maybe look into undervolting it once your there

[digital dirge]

You tryna get someone to fry their gpu??

[sudden torrent]

Nah that won't fry it, they can handle way more vintage than you can set in software or even firmware. Buildzoid has some videos with an external voltage controller hard mod, goes up to like 1.5v before it shuts off safely.

[digital dirge]

Oh ok. So to really get max oc you can set voltage slider all the way up?

Obv at cost of more heat right?

[sudden torrent]

You'll need a way to cool it, probably sub-ambient, to get any real benefit but yeah

[digital dirge]

I see ok.

[sudden torrent]

Otherwise increasing the heat load means you go backwards on the boost table

[zenith palm]

Which is why you should be undervolting if anything on air cooled cards

[kind walrus]

How to fix on RX.6600

[sudden torrent]

Is it the same through multiple runs?

[kind walrus]

I changed tessellation to use the application settings and I got the same invalidation

[digital dirge]

Quit modifying your tesselation

[kind walrus]

I didn't do it

I swears it

I installed the driver and it defaulted to 8x

On a lighter note I haven't done any bios power modifying or repasting and the card is on like 8800 graphics score which is about 10% off of #1

But idk how much that means with the tessellation

[sudden torrent]

Sometimes you need to reboot to get it to reread the settings correctly

[kind walrus]

Ah ok I didn't do that

[digital dirge]

Nub

Jk. Sorry, I'm at work. Bored.

[kind walrus]

Anyway it's day one, it seems to like fast timing vram maxed so yeet

[kind walrus]

Ur good lol

Still getting a feel for the clock speed, it'll probably do more with a repaste and maybe some 60 more watts (idk what more wattage this card can take yet)*

[digital dirge]

Ugh I wanna oc my 6950xt already.. I have to wait until my fans show up.. they were supposed to today.

[kind walrus]

Fans? P12?

Wait

I remember

Deja vu

[sudden torrent]

I don't know how much headroom that's got anyway since it's basically a factory overclocked 6900 XT

[kind walrus]

24K timespy should be expected on xtxh

At a minimum lol

[digital dirge]

Yeah and the single p12 i ordered on Amazon is through Arctic and they are the ones holding up my order.

Of the other 9 fans and extensions.

[kind walrus]

Oh right you're putting a galahad in iirc

[digital dirge]

I'm not really happy with them atm because of that.

[digital dirge]

Yeah, that showed up at 10am this morning

With a lga1700 kit.

Although the bracket is bendy plastic.. so I'm a little wth on the quality compared to everything else in the kit.

I was gonna see if the Arctic bracket would work, but idk.

Arctic at least provided a nice solid metal bracket

[kind walrus]

Alphacool has the lga1700 backplate you could use if you're worried about that (may need washers to adapt it)

Actually good question, contact frame?

[digital dirge]

The thing that goes on the back of the mobo

[digital dirge]

Idk, you think the plastic will be ok?

[kind walrus]

Honestly I kinda agree with it feeling flimsy lol

[digital dirge]

Yeah. That alphacool backplate works for the galahad?

[kind walrus]

I reckon it would but alphacool says for it's aio's only

[digital dirge]

I see. Ill take a look at it. Do you by chance have a link handy?

[kind walrus]

EK also has a backplate that works but that doesn't fix the cpu flex like the alphacool one does

Ye one sec

https://www.au.aquatuning.com/water-cooling/cpu-water-blocks/cpu-backplates/29821/alphacool-apex-backplate-xpx/eisbaer-lga-1700-metall-full-cover

[digital dirge]

The Arctic doesn't have threaded holes on the back plate so the mounting of the pump wouldn't work right i think.

[digital dirge]

Do those pins go through the backplate with the threads going on the other side of the mobo?

[kind walrus]

It comes with screws designed to mount that cooler but whether it tightens down with the lian li I'm not sure, but washers will prolly fix

Pins through the mobo, tighten into the backplate

It's finicky

[digital dirge]

Hm.

[kind walrus]

EK's one isn't as finicky, you could use that with a contact frame

[digital dirge]

What is the contact frame?

[kind walrus]

Thermalright cpu contact frame

[digital dirge]

I just know backplate and pump block

[kind walrus]

You prolly don't need it tho on 12600K

[digital dirge]

Is that like the thermal grizzly thing?

[kind walrus]

It stops cpu flex

Ye

[digital dirge]

Gotcha. Ok. I was planning on grabbing one of those when I grabbed a 13th gen

Why a thermalright one over grizzly?

[kind walrus]

Same thing, cheaper

[digital dirge]

Oh. Ok

[kind walrus]

Like gigglebit versus a sus

[digital dirge]

Yeah.. ima be grabbin a sus mobo soon

Alright. My main concern was longevity of the back plate, but I'll just use it for now and look into what I can do about it by the time I got for the 13th gen/new mobo

[kind walrus]

Longevity I wouldn't worry about vs. effectiveness

[digital dirge]

Well, results of effectiveness from GN is done with the flimsy backplate

[zenith palm]

Make sure you have the most up to date version of their software recogniser thingy

[zenith palm]

6950xt has a lot of oc headroom more than 6900xt

[kind walrus]

I do

That new driver like 2.7 or something

With the minecraft improvements

[sudden torrent]

Really? Just the memory or the core too? Because isn't the core just a xtxh 6900?

[zenith palm]

Both afaik

Think it's better than xtxh 6900 but i could be wrong

[kind walrus]

I think on average it's slightly better

It's not like 3090 Ti that just goes ham

Also depends on which xtxh/6900/6950 I think

Some have cleaner power deliveries than others for pcb

[sudden torrent]

That accounts for maybe 2% difference at best

[kind walrus]

Yeah, but then also unlocked vram

[sudden torrent]

The vram is binned like crazy on those 6950

That much I know

[kind walrus]

Some 6900's it's the same but you just can't push higher due to the limits of the drivers

[sudden torrent]

Dang I was going to go to sleep but now I'm going to have to look at hwbot scores lol

[kind walrus]

Lol 3dmark might also tell a bit of a tale

[sudden torrent]

Yeah but they don't separate by cooling type

[kind walrus]

[sudden torrent]

Hwbot can

That way I can just look at air cooled results to weed out the LN2 and custom loop subs

[digital dirge]

Let me know your findings please :P

[zenith palm]

Thought about that, 6900s highest is lower than 6950s highest lol

[kind walrus]

Ye

[sudden torrent]

6950 best time spy sub on stock cooling got 2800 core 2400 mem
6900 best the core is about the same but memory is 2140

[kind walrus]

Wait fr?

It's changed recently, 6900 was higher before

[kind walrus]

Ye that sounds like driver limits. 6900 goes to 2150

6950 is unlocked to like, 3000

[sudden torrent]

Makes sense yeah. So really the only difference between the best 6900 and 6950 is the memory.

[kind walrus]

Sounds like we gained nothing

[digital dirge]

Shhhh

I don't wanna know this lol

[sudden torrent]

The price difference between them isn't that much between a top model 6900 and a 6950 so it's still worth it, at least to me

[digital dirge]

What do you have?

Also what do you consider top model 6900?

[sudden torrent]

3080 ti
It was all I could get mid shortage, the FE from an in person best buy drop.

[digital dirge]

Noice

[sudden torrent]

Best of the best, probably HOF

[digital dirge]

Oh ok.

I guess, my sapphire is midrange then?

[sudden torrent]

Which one?

[sudden torrent]

Nitro pure, that was mid-high iirc

Nice model overall

[digital dirge]

Its beautiful. I watched the gn tear down and he was gushing all over it lol

The only really bad thing he said was the price:performance

[kind walrus]

Top model 6900 is ocf/ toxic extreme/strix top

For 6950 it's OCF again but idk if toxic is also up there

[sudden torrent]

And hof which isn't sold in US and is above all of those

[kind walrus]

6900 has hof?

I thought that was an nvidia thing

[sudden torrent]

Wait you're right that's Galax

What was I thinking about

[kind walrus]

Wait galax has a 3080 10gb hof

Wtf why is that vbios not public

[sudden torrent]

Red devil I think

[kind walrus]

Oh yeah red devil ultimate/liquid devil

[sudden torrent]

Yep

[sudden torrent]

Check unofficial uploads

https://www.techpowerup.com/vgabios/245926/245926

[kind walrus]

I did, only sub 400W ones

So that's why there's a 1000W vbios, I knew there was one but now I've seen a card that should have one

[sudden torrent]

It's the kingpin bios that's 1kW, and you have to request it from EVGA

[kind walrus]

That's for 3090/ti

I believe the 80 Ti is only hof

But 80 10gb I've been told before they have 1000W but they wouldn't hand it over

[sudden torrent]

The most I think I've seen is 450W

Which you'd think at least one triple 8 pin model would have 500

[kind walrus]

Yeah

It's sad tbh but also not really important tbf

[zenith palm]

Hm i wonder, could just use kp bios tho

[zenith palm]

360w max seems small

[kind walrus]

You can't use a 3090 kp bios on a 3080 I thought?

Also skemmers

[digital dirge]

Yeah @zenith palm

[kind walrus]

Also I did a kekw

I stuck the 1650 in my 3080 rig

Wanted to see what happens and honestly that lp card is the quietest it's ever been

[digital dirge]

If I had enough room.. and if I could run nvidia/amd drivers, I'd do the same

[kind walrus]

3080 tuf + sapphire 6900

[digital dirge]

That tuf would die lol

[kind walrus]

Like a hidden knife in the boot

[zenith palm]

Oh yeah forgor no kp 3080

[kind walrus]

My idea is to try and use that little zotac as the nvenc tho

Or even a supp display

Like if I had a little usb-c rasp pi screen for stats

[digital dirge]

Oh like my sensor panel?

[kind walrus]

I was eyeing a $30 one before

I think it was called a turing smart screen

[digital dirge]

Hm

What size?

[kind walrus]

Like tiny

6 keeb keys big

[digital dirge]

Sheesh

[kind walrus]

Stick two temp graphs on it, or a bunch of memes

Like stealing pato gifs

Or smthn

[digital dirge]

https://www.amazon.com/gp/aw/d/B09MFNLRQQ?psc=1&ref=ppx_pop_mob_b_asin_title

How much is this for you?

[kind walrus]

111

[digital dirge]

Waow

I feel like you should get a bigger screen for sensor panel since you'll be spending $50 for Aida

[kind walrus]

Do I have to buy aida

[digital dirge]

AFAIK, its the only way to make a sensor panel

[kind walrus]

I could also just stick my extra hdmi into it

Use that to run a dummy screen

For recording

Hmm

[zenith palm]

Eww

Buying aida 🤮

[kind walrus]

Yeah prolly not gonna do it if I need aida

[digital dirge]

I did. And it was worth for my sensor panel :P

I do have 2 PCs left on my liscense..

Since I only have the 1 pc

[zenith palm]

Can i see?

[zenith palm]

Oh yeah that's pretty cool

Might need to move the pop with the 6950xt

[digital dirge]

It's going to get changed up a tad with the new GPU and that fact that I added another SSD

[digital dirge]

is there any sort of like thermal thing I can put in between it?

[zenith palm]

Uh don't think so

[digital dirge]

well then.

I'll figure something out.

[sterile flame]

Push it to the limit

[signal belfry]

Man ln2 is so useless when that exist

[static oasis]

What the heck

[storm kettle]

is there an app thats free?

[zenith palm]

Msi afterburner

And 3d mark timespy is free

3d marks demo on steam

[frigid cedar]

Just a little bit more to the score

[frigid cedar]

Laughs in trial version

[digital dirge]

most the time that doesn't work anyways. Plus, why not support the company that took all that time and hard work to make something that you'll use?

That is how they continue to provide good software after all.

[sudden torrent]

And you're borderline recommending software piracy so please don't

[signal belfry]

Sorry

Didn’t know that

[proven canopy]

I'm not really sure why aida has such laughable DRM

Also - why search keys on youtube vs google lol

[sudden torrent]

It takes longer for the keys to get blacklisted on YouTube

[proven canopy]

afaik they never get blacklisted

[sudden torrent]

That's the general pattern at least

[proven canopy]

There's no online verification at all

I.. know someone who's used the same aida engineer key for a few years now

I'd imagine folks make more money by putting it in a youtube vid

[sudden torrent]

Which kinda makes sense for software used on bench OS's a lot

[signal belfry]

Ik this vid with an aida 64 key got blacklisted

[proven canopy]

Yeah - though I'm surprised it never tries to phone home when connected to the net

[sudden torrent]

But it should be trivial to blacklist keys by updates without an online system

[tall pelican]

Or dig up the hwbot comp that had aida reads, and use the provided key

[frigid cedar]

Yeah would definitely just buy it if not trial

[proven canopy]

I think that was the Corsair ddr4 comp

[tall pelican]

should still be able to dig up old comp, and pull the key from the directions though

nvm, leeg took it down https://community.hwbot.org/topic/208677-the-official-corsair-ddr4-oc-open-thread/page/2/#comment-595693

[night grail]

wellllll about that

just saying that key was invalidated FYI

i saved it from the camp and about 5 days after it ended the key no longer works

[digital dirge]

My newest bios does not like my memory oc that I had before I updated :(

It seems it doesn't want to apply my SA voltage.

[zenith palm]

That happens yeah

[finite frigate]

I LOVE THIS

[digital dirge]

Is it possible to reinstall the last version of bios I had so I can go back to the OC I had?

[kind walrus]

Yes

Unless it's like asus copium you can definitely go back

[sudden torrent]

This is why when it comes to firmware... If it ain't broke don't fix it

[digital dirge]

Yeah, it was the last bit of troubleshooting suggested to me because it fixed other peoples same issue so I figured why not.

[sudden torrent]

Ah see that's the exception, since it is broke lol

[digital dirge]

yeah but it didn't fix it sadly 😦

[zenith palm]

Yup

[restive cargo]

lord

Please protect socket

towels go a long way here.

Pretty epic tho not the first time I've seen that.
Come sub to the unofficial official Newegg HWBOT Team.

[proven canopy]

So how much dry ice did you buy?

[restive cargo]

I never went see my dice guy.

I got the local hookup.

[restive cargo]

Try what I did and pop an aio into an ice bucket.

Good times

[dull ginkgo]

@restive cargo didn't you use a huge tube once for cold air

[restive cargo]

yes

i did that too

The dryer duct

I wanna try that again but with my custom loop.

Stick my hwlabs 360 in the ice bucket.

The water shouldn't freeze fast as long as I keep the pump on.

[proven canopy]

Post the picture

It's

[proven canopy]

Just use 40% antifreeze

Peak or Prestone

[signal belfry]

How cold was the cpu?

Nvm

I thought the bucket was connected to the loop

[mental turret]

lol nice, we are the same

[proven canopy]

[digital dirge]

Then there's the hammer. You know, for when he doesn't get the bench results he wants and smashes the hardware in a rage.

But.. fr though, why you gotta hammer there? Lol @restive cargo

[barren ridge]

[sudden torrent]

I keep a hammer within reach of my PC too, you don't?

[digital dirge]

Uhh. I mean my hammer is like 10 steps from my pc, but no.. not within reach. I see no need lol.

[restive cargo]

That's for breaking the ice

I had like 5lb bags

[kind walrus]

https://www.3dmark.com/spy/29823636
https://www.3dmark.com/spy/29827179

Best two results from this morning's MPT run with the RX6600 Eagle. This is a good card. I haven't repasted it nor maxed the fans (Max rpm is like 4500 and idk if the windforce fans are safe for that rpm) nor really pulled all the stops on the cpu or ram* oc either

[signal belfry]

Nice oc

[kind walrus]

Yea between 10 and 15% is pretty good

It was also pulling 250W vs the stock 100

[signal belfry]

Could my uncore being clocked high stop me from passing a speed on my ram?

I’m on 10th gen intel btw

[digital dirge]

I believe pato said something earlier about having to have lower ram frequency to oc ring

[signal belfry]

Ik but I meant that but vice versa

With high uncore causing ram oc issues

[digital dirge]

Well its essentially the same thing.. if your frequency to high, you can't get high ring oc.. if your ring oc to high then you can't get as high frequncy.

[signal belfry]

@digital dirge what was your ram clocks? Asking cause I’m curious of how your uncore clocks with the ram

[digital dirge]

I'm at 4000c16.

[signal belfry]

Same

B die?

[digital dirge]

E rev

[signal belfry]

Nice I also use rev e

My current clock is 16 20 20 38

[digital dirge]

Ballistix 3200c16 kit?

[signal belfry]

And 4.6 on the uncore

3000 cl15

[digital dirge]

Ah

I can't get below 16 22 22 38

[signal belfry]

U try raising the voltage?

[digital dirge]

Yep.

[signal belfry]

I was able to get down to cl14

Still a nice oc

[digital dirge]

I had to raise sa voltage to get there as well.

[signal belfry]

What’s that at?

I’m bout to start overclocking a bit later to pass 4000

[digital dirge]

I can't remember off the top my head.

Like 1.43 or something.

[digital dirge]

What cpu?

[signal belfry]

I7 10700k

I wonder if the bios are in 4k

[digital dirge]

Ok, find out what safe daily sa/io voltages are for your cpu. I have 12th gen and it likes higher voltages.

[signal belfry]

Oh I read have those voltages set

I’m just bored rn so I’m overclocking my oc again

[digital dirge]

Ah.

[signal belfry]

Watching stranger things season 4 rn as well

Currently catching up on the season

[digital dirge]

Today is my Friday and I get a 3 day weekend so I might mess around with OC a bit.

My cpu for the most part is fine, but i don't really wanna lower ram oc to raise ring clocks

[sterile flame]

Just do mild oc and play some games lol

[signal belfry]

I’m getting postcodes 55 rn lol

No ram detected

[sterile flame]

Ray tracing is soo much better on the 3080 then my 2080ti

[signal belfry]

It’s either buy good pc or buy games lol

[sterile flame]

I am doing both

[mental turret]

gdie > bdie
😎

[digital dirge]

I will probably raise my sa voltage by like .07 and see if I can lower timings on my ram. Might bump dram voltage up by .05-.1 as well

[signal belfry]

I just realized I was running my trfc at 580 4000 mhz I think that’s good for rev e

Poggers

I’m posting

Pass 400

[mental turret]

😍

[sterile flame]

Getting 19.6k ts graphics score with 3080

[signal belfry]

@digital dirge u can not believe how hard I tried to post pass 4000 before lol

Just turning off my uncore oc

Lemme pass 4000 so eeasily lol

[signal belfry]

Not to brag but I got like 22.6k

[sterile flame]

With what gpu

[signal belfry]

On a 3090 fe

[sterile flame]

3090 tho

[signal belfry]

Basically the same thing, 3080 + 10

=3090

[sterile flame]

Not same thing

3090 has like 1k core more

[signal belfry]

Well 3080 core + 1k

Yea imma go back to gaming

Ram doesn’t want to post 4400

[zenith palm]

Numbers going brr fun

[mental turret]

not to brag but i've never run 3dmark before

[zenith palm]

[sudden torrent]

The sad thing is that 3080 is scoring the same as my gigatrash 3090 did. So glad I got rid of that.

[lavish tundra]

Ill take ur reject 3090 if ur just getting rid of it :)

[signal belfry]

How bad were the scores on it

[lavish tundra]

he just said worsse than his 3080

smh my head

[signal belfry]

What’s the average 3080

Scores

Like 16k

[lavish tundra]

I dunno what his 3080 scores

ask him why u asking me

smh

[signal belfry]

U the only guy in this chat

[lavish tundra]

Ok im done joking around

I honestly dont remember

but it was a garbage 3090

[signal belfry]

I’m going back to google

[lavish tundra]

also hes talking his 3090 oced vs his 3080 oced

[signal belfry]

Oh

[lavish tundra]

so avg scores are meaningless here

[signal belfry]

Maybe a capacitor popped off his 3090 lol

Like the gigabombs

https://tenor.com/view/gigabyte-psu-gamers-nexus-pc-bomb-planted-gif-22845602

[lavish tundra]

@zenith palm

[faint tangle]

This took me a minute

[icy hare]

Bomb has been planted

[zenith palm]

https://tenor.com/view/vietnam-cats-flashback-gif-10819307

[sudden torrent]

It's long gone. Sold it on eBay for what I bought it for and got 3080 ti FE for MSRP.

[sudden torrent]

The trash 3090 I had only hit 19.6k overclocked and that's after fishing KP bios. It should have gotten 21k min.
I got a 3080 ti FE, and first try it got 21k.

[zenith palm]

2x8pin 3090 momen

[potent fiber]

3090 hype moment anyways.

[kind walrus]

Pfft what is that gif

[potent fiber]

It's called shellshock

[kind walrus]

No the cat

[zenith palm]

I looked up flashbacks

[kind walrus]

https://tenor.com/view/vietnam-flashback-cat-gif-18770750

Hahahaha

Why is this a trend

[potent fiber]

lmao. That cat has* seen some sh...stuff.

[icy hare]

he's coming down pretty hard from the catnip

[restive cargo]

Lol

[restive cargo]

How many Wild Theo's came out?

Dam UPS guy stole em.

[zenith palm]

Sheesh

[short blade]

is there any way to disable spread spectrum on msi pro z690-a? not seeing it in bios

[night grail]

nice

ln2 when

you US based?

you should come to our country cup meet this year

will be in december

we always have a blast

since i hosted the may meet i didnt have the funds to go to cali

yeah forks and yos taught me last november at country cup

https://media.discordapp.net/attachments/660489048405704704/920733985733242900/9D840F52-AAF5-459D-B046-52C229866F90.jpg?width=678&height=903

pic from last years country cup

was pretty chill

yos pulled it together

got intel and international computer concepts to sponsor it

yeah but thats for product launches where we bench their stuff

not for CC

at least to my understanding

november 1st to end of year

[night grail]

new launches are always banned for CC

[sudden torrent]

They word the terms specifically to include only certain hardware in each tier

[signal belfry]

Looks like pay to win jk

Looks really fun tho

[tall pelican]

only if it launches after CC starts

[night grail]

No

It has to be out for a while before it is allowed to ensure all counties and regions have a fair chance of acquiring the hardware

Typically a time of about one year since launch is required before they allow hardware in country cup

Like last year 30 series was banned for country cup despite having been launched for more than a year since not all regions and people had a fair chance at owning ampere

[mental turret]

Ill see you there B)

oh god

he's gonna inject me with experimental insulin while im not paying attention

💀

[restive cargo]

See this is why I don't attend bench meets.

[night grail]

lol not all of us are like this

[mental turret]

yea only forks drugs people

[night grail]

ehhh when we were in illinois they got the dispensaries lol

i bought some gummy bears to OC with

i was chillin big time doing BCLK valids with my z97

[proven canopy]

Encouraging brutus to try eating a fruit for once does not count as "drugging people"

[night grail]

lol

how much plastic stuff did brutus destroy at asus HQ with ln2?

[proven canopy]

just regular hardware I think, and the monitor I was using for benching somehow just from being in proximity

[still crystal]

does anyone know what his error is when I try logging into my HWBot account from my 3dmark account?

I couldn't share the whole image cause it included my username AND password in the error

[sudden torrent]

Which means they might be storing the password in plain text or reversible encryption 🤦‍♂️

[sudden torrent]

Looks like someone failed to update their SSL certificate perhaps

[still crystal]

Here’s the error in its entirety with my pw redacted

[proven canopy]

Wow, droq1-419 were all taken?

[sudden torrent]

Yeah looks like an issue with hwbot's cert

[scenic vine]

Wait Brutus actually went to a meet?

[steep harbor]

Can someone help me overclock my i7 12700k?

[mortal shadow]

It's already a pretty fast chip why oc

[steep harbor]

Its at 3.6ghz

Max boost is 5 why not put it there

[mortal shadow]

here with ks but no oc

[proven canopy]

But why

[signal belfry]

Y’all wasting cash if u don’t oc it

Imo

Assuming your cooling is decent there’s no point to run it at stock

[signal belfry]

Set a voltage 1st, below 1.4v for intel iirc I might be wrong, then set llc at 4 and starting increasing core clock until unstable

Some people say recommended for alder lake is 1.35v or below

U could just run a higher llc if your clock isn’t stable

[night grail]

Brutus has gone to several meets

He went to the meet I hosted in may and the recent meet in California

[icy hare]

first thing I did when I got my 12600k was boost the clock

you're paying extra for performance but just leaving it on the table. Makes no sense

[proven canopy]

You'll run out of ambient cooling before you run into dangerous voltage on ADL, at least for benching.

[zenith palm]

Ruins the whole point of a KS lol

[zenith palm]

#build-pics message

[signal belfry]

His board is also a b chip

Said he bought the i9 for 200

Pretty good deal

I feel like that cooler isn’t really enough tho

[kind walrus]

You can trust your feelings on that one lol

[zenith palm]

9900k's are infamously hard to cool and they have a 15$ gammaxx 400 on it

[barren ridge]

Makes me doubt he actually has 9900ks

[lavish tundra]

yeah

[barren ridge]

Otherwise it would've throttled so hard

[mortal shadow]

Maybes the board limited how much wattage it can take

It's in the 75c to 90c range in gaming

[signal belfry]

What is that emoji 💀

💀

[barren ridge]

more like holding cpu back

[dusky tinsel]

So for people who use AMD I have the 6800XT card and I use AMD Adrenalin Edition to change the fan curve on my graphics card to keep it cooler. I don't overclock the thing but I keep getting amd wattman crash due to unexpected system failure but it only happens when I alter the fan curve I been looking it up but no answer. Like I said I don't do anything else just change the curve why is it doing that.

[proven canopy]

Why do you need the card to run cooler

Do you enjoy the noise?

[digital dirge]

Yes. Yes I do.

[scenic vine]

I would use fanControl for fan control

[sterile flame]

HWInfo I think has a fan control plugin.

[barren ridge]

doesn't work for anything

only some supported stuff works

[proven canopy]

Techtested and Unity 3d benching podcast https://www.twitch.tv/techtested

[mental turret]

kill me now

[rose bison]

Best Skylake X cpu for gaming?

[rose bison]

cascade lake 10900x best x299??

[cold jolt]

12400f would game better

[mental turret]

Yea if you don't already have the parts, you should go with 12th Gen or wait for 13th gen/ryzen 7000

[scenic vine]

Or SPR

[keen sail]

What do you guys think a good overclock would be for a 3060

I have a 5800x and a 850W PSU

[zenith palm]

Just see what you can do, I'd say a good timespy score would be 9700 graphics points in timespy

[keen sail]

Alright I’ll try this out

[proven canopy]

Time to bench https://cdn.discordapp.com/attachments/1006684267264348170/1008642756790468628/TeamCup2022.jpg

Team cup has started!

[mental turret]

my gdie by early october:

https://tenor.com/view/kaboom-boom-nuke-nuclear-bomb-gif-20734003

[short blade]

anyone know how to work with SA GV on tiger lake?

[mental turret]

@lavish tundra

[sterile flame]

Hello guys are there any softwares you can recommend to OC RAM or do you guys always use the motherboard BIOS settings? I would like to get the best performance possible out of my RAM but am a novice. Would love recommendations or any help.

[dull ginkgo]

https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4 OC Guide.md#primary-secondary-and-tertiary-timings

[lavish tundra]

what

[sudden torrent]

I'd guess he's looking for your comments on the g-die ln2 overclocking

[lavish tundra]

My comment is that it looks cool

literally

heh

[zenith palm]

Dies

[digital dirge]

You beat her 6.5 ln2 with a 5.2 h2o?

Witchcraft?

[modern walrus]

ycruncher <3 memory frequency

[digital dirge]

I also didn't see until now that she was using 12700k and you 12900k.

[modern walrus]

ya but both only running pcores

so both considered 8x CPU

[digital dirge]

Oh ok

Well then... rommy sucks.

:P

[modern walrus]

lol it's probably that new ycruncher better or something

[modern walrus]

si

(yes)

nice? what do you mean? you're supposed to be talking crap

lol

do 12700Ks have AVX512?

[zenith palm]

Only older ones

[modern walrus]

ah right

[zenith palm]

Or unless they where put into board with micro code update

[modern walrus]

EVGA Dork lets you change to older microcode thing

has the option for like "latest" & uh I forget

so "[not latest]"

[zenith palm]

It can reverse the micro code?

[modern walrus]

I forget what I said lol

[modern walrus]

eh just run on the old one I guess. I disabled ecores & didn't change it & AVX512 didn't show on CPU-Z

then it did once I changed the setting

[zenith palm]

Oh so you can temp disable it on ones that haven't been micro code update

[modern walrus]

yes I believe so

thank you lol

[zenith palm]

Hmmmm

[modern walrus]

lol I put that there cuz it was the stupidest thing I could come up with

[modern walrus]

how do I get forks role

[zenith palm]

https://tenor.com/view/the-good-place-kristen-bell-fork-me-fork-forking-gif-10879990

[modern walrus]

lol

what??

you have forks role?

not cool

[mental turret]

YEA U SUK

[modern walrus]

sounds more like ya thx

[scenic vine]

Forks alt

[potent fiber]

[knotty lake]

👀

[night grail]

i need forks to give me the spoon role

@proven canopy you know you want to lol

[mental turret]

sus

[night grail]

no, lol

besides he is way taller than me doesnt work out good

but if were going off of cutlery i need a spoon role and someone needs a knife role

[scenic vine]

Tenderizer role?

[signal belfry]

sporks?

[sudden torrent]

That implies a fusion of forks and spoons that I'm not ready to accept

[lavish tundra]

O no not again

[wind prairie]

Would bdie be optimal for 12th gen overclocking

[zenith palm]

B die, rev e/b used to be a good budget choice although nothing really new (in the us anyway) anymore, hynix ddr5

[proven canopy]

Sure, on ddr4 boards.

[mental turret]

Best ddr4 over clocking board on lga1700 is the a-pro something right?

🤓

[cold jolt]

wtf far no longer techie??

what is this

[mental turret]

I'm picking up that maximus 6 hero soon

[mental turret]

Yea idk

[cold jolt]

kinda cringe

[mental turret]

No more yellow pee role

[cold jolt]

pee pee role best

[mental turret]

https://tenor.com/view/nerd-emoji-nerd-emoji-avalon-play-avalon-gif-24241051

[cold jolt]

[mental turret]

Yea

[proven canopy]

Not best but great for the money

Strix d4 is good

Maybe even the best

[mental turret]

Ah alright

[kind walrus]

See I thought that too looking at the results shortly after 12th gen dropped but then everyone told me I was wrong

I'm glad to see someone else agrees that the strix does well and that I seemed to be on the money for that one

[proven canopy]

You want to bench on ddr5 most of the time though

[kind walrus]

Ofc but still, I feel validated rn and it's only 7am

[scenic vine]

Wait 4 Z790

[proven canopy]

Especially given the current options of z690 boards, though a $500 dark isn't awful

[kind walrus]

I'm not buying one now, but I nearly did 9 months ago

[hollow sluice]

Can I overclock my 3200MHZ CL16 ram on a H610M-G motherboard? or should i get a B660 motherboard?

[kind walrus]

Should only be able to run the stock supported speed on it afaik

What cpu are you using?

[hollow sluice]

i3 12100F

[kind walrus]

You bought all of it yet?

[hollow sluice]

no i am going to go sunday

[kind walrus]

Yeah even if you got a b660, you won't get more than 3600 in gear 1 with even decent ram

Not exactly worth doing, let alone on a 12100f at that

Reason is they lock the IMC voltage down on non-K chips which you need it higher to go faster

[marble marlin]

https://no-spam.email #1 Disposable Temporal Email Adress

[hollow sluice]

so should i get a H610 ?

[kind walrus]

You can with a 12100F

How much is the pc in total?

[hollow sluice]

60,000

or u can tell $800

[kind walrus]

Php? Idr?

Baht?

[hollow sluice]

60,000 rupee

[kind walrus]

Ah

Yeah that seems like a decent choice considering

[hollow sluice]

is 3200 on a B660 better or 3200 on a H610

[kind walrus]

Same thing

[hollow sluice]

Oooo

ok i will get the H610 so i can overclocking it and use that money on my GPU

tysm

[kind walrus]

As I said before

[kind walrus]

.

[hollow sluice]

yea what is afaik

[kind walrus]

As far as I know

I.e 2133, 2400, 2666, 2933 or 3200

[kind walrus]

And again,

Not worth paying premium for ram when the platform itself is basically ideal at 3200-3600 to begin with

[hollow sluice]

man i dont know what u mean gear1 and IMC

[kind walrus]

IMC is the memory controller, what talks to the ram

Gear 1 is the speed

Gear 1 is the fastest, gear 2 is significantly slower

[hollow sluice]

OK i get it

[kind walrus]

Over 3600, the chip will likely want gear 2

Which makes it mostly not worth it

[hollow sluice]

will i be able to use my 3200 ram on a H610 on a speed of 3200?

[kind walrus]

I think so

[hollow sluice]

ok

tysm

[kind walrus]

Np

[faint tangle]

No

H610s can run xmp

[kind walrus]

3200 is a stock jedec speed no?

[dull ginkgo]

Jedec 3200 is 3200c20, should be able to run the 3200c16 or whatever xmp it has

[kind walrus]

Hmm ok

[faint tangle]

thought it was c22?

[dull ginkgo]

theres multiple

[faint tangle]

oh weird

[dull ginkgo]

theres 20-20-20 22-22-22 and 24-24-24 afaik

[potent fiber]

Just wiki, but yea:

[proven canopy]

12900KF on liquid nitrogen https://www.twitch.tv/antitux

[proven canopy]

Took a few tries to get the OS right, but ddr3/am3 has been fun thus far https://hwbot.org/submission/5070965_

[kind walrus]

new cooler today, gained 10C headroom on my 12900KF

hopefully enough for 5.3p 4.0e I hope

i hope i hope i hope

keep forgetting it's 1 less on ADL, 5.2e

YESSSSS

YESSSSSSS

5.2 LESS GOOOO

5.3?

nvm it's peaking 95 now

le oof

295W DAMMIT

hmmmm

whooaaa

my gpu gained 15C now that it's horizontal

didn't expect that with a waterblock

[kind walrus]

4.1e not crashing

[kind walrus]

4.2e crashing but which tile

[kind walrus]

2089 ST 29573 MT R23 single runs

[zenith palm]

[kind walrus]

OMG

29892

COME ONNNN

[kind walrus]

29961!!!

[mental turret]

what are you trying to beat?

30k?

[kind walrus]

ye

[mental turret]

you'll get there ez

[kind walrus]

I'm 39 points away

if I can get ring to 4.5 I think I'll get it

nah didn't like it

[proven canopy]

r23? Ring shouldn't matter too much

Nor will memory. Run it through benchmate, set priority

[kind walrus]

yes it isn't doing much but it gave me a little bit more like 100 points

could be run to run variance tho

memory I've left alone

WTF

29999

FU-

WHAT

This chip is trolling

[mental turret]

LOL

[proven canopy]

up bclk by .1 mhz

[kind walrus]

I could

I have the bclk controller ready but ima try again

ok went down ima bump bclk

I went down

reeeeee

maybe a touch more voltage

hmmm

bclk down 0.1 gets me just as close as 29999

[kind walrus]

YESSSSSSS

YAAAAASSSSSSS

AAAAAA

I took the case panels off and I gained 1 point (No it didn't help but I got it )

so 5.5 1p-4p 5.2 8p 4.3 4e-4.1 8e 4.5 ring

100.5 bclk 1.33V

hopefully can stabilise it fully later, seemed fine in OCCT

will prolly end up losing a fair bit tho lol

[ancient bridge]

I cant imagine how much power that thing draws

[sudden torrent]

https://tenor.com/view/spongebob-maximum-power-power-spongebob-squarepants-full-power-gif-22777727

[kind walrus]

298.5W peak load. It'll spike higher tho. Not final numbers either

[ancient bridge]

My lil 5600 could never

[sudden torrent]

Not with that attitude it won't

[safe belfry]

Can you undervolt regular consumer laptops

in a typical situation

[safe belfry]

Ignore above, I've undervolted -80 mV on my CPU

Should I check any of these to get even more battery life out of my laptop

[zenith palm]

You can also disable turbo but that's gonna sacrifice some performance

[modern walrus]

gosh I wish @proven canopy would stream his bench sessions for us plebs

[winter hull]

ye forks i'm bored

[sudden torrent]

I'm rather disappointed. Memory overclocking isn't nearly as good on my "new" X570 board. I'm putting a fan on my memory and just sending 1.6v because I can, and I can still barely do 3800 14-16-15.

Before I could do 14-13-13 at 1.52v with super tight secondaries

[proven canopy]

Surprising that's a board limit. Could have to do with agesa/bios. Post a zentimings

[sudden torrent]

I will once I get it dialed in. It's on the latest bios, I got it that way from the service center. At least it's still easy to do 1900 fclk.

You know how long it can take to dial in settings from scratch lol

[kind walrus]

Which board?

[sudden torrent]

Gaming edge WiFi

[kind walrus]

Ah yeah

You had before?

[sudden torrent]

X470 gaming plus

[kind walrus]

Interesting

[sudden torrent]

This edge is essentially the updated version of my previous board, similar in most ways except added WiFi and PCIe 4

[kind walrus]

Maybe just go back to X470 cos those boards aren't bad in the scheme of it

Then take the 570 back

[sudden torrent]

I can't, this is a RMA replacement

[kind walrus]

Oh

Le oof

[sudden torrent]

They also didn't send me the m.2 heatsink, IO shield, WiFi antennae, or backplate

[kind walrus]

Ehhhh

You need the antennae at least

Wait the x570 had a backplate?

[sudden torrent]

Tbf I use wired to connect to a router bridge

[kind walrus]

[sudden torrent]

And Bluetooth doesn't need the antenna

[kind walrus]

Can you push fclk higher?

It's a 5800x ye?

I ask cos single ccd

[sudden torrent]

I was able to do 2000 stable back when I was testing it but there were WHEA errors

[kind walrus]

1933?

[sudden torrent]

I could test again with the newer agesa and board but eh, barely worth it

[kind walrus]

3866 14-16-15 might be a bit quicker than 3800-14 13 13

[sudden torrent]

Once I get things figured out I'll consider it but this is all very time consuming

[kind walrus]

Yea RAM is lol

[mental turret]

I got some ram today but couldnt bin it because my board is currently dead lol

Not on a great PCB but it was cheap

[sudden torrent]

Not a bad set all things considered

[mental turret]

Well yea it's not bad, that's why I still got it

Wouldnt be surprised if it cant do 1T though

Im gonna expect something like 2200C8-10-8 2T at best lol

[scenic vine]

I was late to the ddr3 scene so most ics I had were 4gbit, not the best performers

N4B and M4E weren't too bad, significantly worse than some S2D I had though

[mental turret]

I pretty much only have 1gbit ddr3 dimms

I only use ddr3 for benching/overclocking except for whats in my server + some extra dimms

[potent fiber]

was gonna mention how old that must be to be 2GB dimms, then found the 1st newegg of em in Oct 2009.

[mental turret]

Yea 2010 isnt super old for these dimms relatively speaking

[potent fiber]

Not at all, just old in the sense as a comparison to my dual rank 8GB dimms from around 2017. I sure like Kingston spec sheets. of course it's nothin too special, haven't* tried to OC at all. -- bit of a Kingston fan. My E8400 rig had khx8500 (micron D9GKX dies) oc'd to 1250ish, the good ol days.

[winter hull]

I've been away for a bit... for ddr4 I've got some old A0 from 2015, if I'm looking at some higher frequency stuff does anyone have some recommendations? A2 or is there better stuff out?

[zenith palm]

Can the a0 not get as high as you want?

And honestly would look used especially in NA for b die because it just feels wasteful now that good ddr5 is a thing

[winter hull]

A0 caps at like 3600 ye

[zenith palm]

just push down timings 🤷‍♂️

[winter hull]

Can't anymore

running CL 12 already

[tall pelican]

I have some A0 se4 that does 4400+

and bdie that does 4k+

[proven canopy]

3600 sounds more like a board issue

Especially when the sticks can do 3600cl12

[winter hull]

Ahh what's the best memory though?

[proven canopy]

Best? Single rank? Maybe the 4800c17 bin, dual rank, unsure, maybe something 4000c14

Do you really need the best ddr4 for daily?

[scenic vine]

Even those bins have a pretty wide margin with binning

[winter hull]

Yeah looks like a 4000 c16 or c14 kit probably have the best odds

[faint tangle]

I kinda want to try to recreate this again https://www.3dmark.com/spy/25848360

Highest score I've managed but haven't been able to get close again with the right system info

[scenic vine]

Go yeet

[open iron]

guys can i run my r7 5700g at 4.5 ghz at 1.343v?

all core

cuz i just realized that my cpu temp are high and i under volt abit

[digital dirge]

This all depends on your particular hardware. What one person can run stable may not work for you and vice versa. This is something you'll have to play around with.

[scenic vine]

I wouldn't particularly suggest running all core on zen 3, pbo will usually provide better results

[proven canopy]

Also with the benefit of knowing the chip won't degrade itself

[proven canopy]

z690 tachyon 12900k ln2 https://www.twitch.tv/antitux

[winter hull]

forks i'm bored stream 😄

[amber rapids]

Does anyone know where to find info on how to start overclockibg?

[night grail]

what are you wanting to OC specifically

id recommend you join the overclocking discord server, there are a bunch of guys who are willing to help you

[proven canopy]

Check the pins, I put together some links to get you started

[amber rapids]

Thx

[mental turret]

i thought the r/overclocking discord server was pretty insufferable

[night grail]

it can be at times

but if your looking for just help they typically can point you in a starting direction

[mental turret]

fair enough

[steady lance]

I have been thinking about OCing my RTX 3070 XC3 Ultra and was wonder if anyone could give me some tips and tricks on doing so.

My current temps peak at about 56c during load.

[zenith palm]

Download msi afterburner and 3d mark timespy (demo on steam) to test. drag the power slider as far as it lets you start upping core by like +60 then run timespy til crash, dial back 15 til stable then when core oc is good, double check with a heavy game for like 15 mins. Then for memory do like +800 then up in 50's til you loose points, then dial back til you're not loosing graphics points in your timespy runs and you can adjust in increments in 5 if you want but i just do 25, then save the profile and set msi afterburner to startup on boot.

Also set a better fan profile than stock usually

[steady lance]

Thank you. Would Halo Infinite count as a heavy game?

[scenic vine]

Nvidia GPU Overclocking Guide: https://github.com/LunarPSD/NvidiaOverclocking/blob/main/Nvidia Overclocking.md

This might help

[zenith palm]

Honestly don't know it well enough but probably

[steady lance]

Just did +100 core and +500 mem. 🤞 it works.

So far noticing a +25-35 fps difference.

[steady lance]

So far pretty stable.

Will try upping the core clock a bit more.

[zenith palm]

Thats pretty conservative

[steady lance]

Okay so this is what I noticed.

+100 core is stable.

+110 doesn't crash the GPU but freezes my screen.

Gonna try upping memory next.

[proven canopy]

Been a while but put up another score for team cup today on the tachyon https://hwbot.org/submission/5082580_forks_3dmark___fire_strike_(gpu)_uhd_graphics_710_2543_marks

[steady lance]

Pentium chips are still being made?!

[proven canopy]

It's two 12900k pcores with no ecores, but yes

Locked multi, so you have to bclk oc

[steady lance]

Confused...

There are boards that support dual 12900K?

[proven canopy]

Same cores that are on the rest of 12th gen p cores

[proven canopy]

no

[steady lance]

So 16P cores?

Ohhh, do you mean you only used 2 P-cores?

and disabled all other cores?

[proven canopy]

12900k's have 8 golden cove cores, 8 gracemont cores. g7400 has two golden cove cores

I meant it's the same architecture

[steady lance]

Oh okay.

That makes a lot more sense.

[mental turret]

x79 smashes it though

https://tenor.com/view/gus-gusfring-gif-24463299

[proven canopy]

Let's bench our dailies

[mental turret]

bet

I win: you pay me $20/hr at forkslabs
I lose: you pay me $25/hr at forkslabs

[proven canopy]

I can't really think of a bench that I'd lose...

[scenic vine]

Thats a very good bet

[open iron]

What’s going on?

[mental turret]

https://tenor.com/view/reidsonm-gif-21586450

[scenic vine]

Faraway making easy money

[open iron]

For?

[proven canopy]

potato rig

[open iron]

I mean by doing what u get the money?

[mental turret]

Nah, my excellent work and expertise in the most superior platform in existence

[digital dirge]

[sand whale]

how do i undervolt/power limit my laptop GPU

my computer is overheating and some games are getting more fps then others and my computers is a msi

[sudden torrent]

Throttlestop

[sand whale]

what is throttlestop

https://www.techpowerup.com/download/techpowerup-throttlestop/

[sand whale]

is this throttlestop

[sudden torrent]

Yes

[sand whale]

ok thx

it says throttlestop is already running wen it not

[sand whale]

as lest I think its not running

oh it works now

any opinion for setting for it

[sudden torrent]

Settings will vary by your laptop model and even chip bin

[sand whale]

whats a chip bin

[sudden torrent]

Short version: luck of the silicon lottery
Long version: different chips of the same model are capable of doing the same settings but at different voltages, what works on one at 1.21V another can do at 1.15V

[sand whale]

ok

[sudden torrent]

The reason is micro imperfections in the silicon, the more imperfections the more voltage it requires

[sand whale]

im so lost im new to computers

[sudden torrent]

When you're undervolting go a little at a time, running a stress test to see if it stays stable

[sand whale]

ok

i kinda get it

https://www.youtube.com/watch?v=QCDIK-nnois

[sand whale]

im watching this tutorial

[sudden torrent]

I haven't seen that specific one but I'm sure it'll help at least

[sand whale]

ok

do you have any recommendations on tutorials

[sudden torrent]

This would get you high performance when plugged in and battery savings on, well, battery https://www.reddit.com/r/razer/comments/8ro4j8/simple_throttlestop_guide_for_cpu_undervolting/

[sand whale]

thx

[mental turret]

it also helps my laptop overheat slower when it decides to turn itself on while sitting in my bag 🗿

[steady lance]

Still OCing but so far doing +135 Core and +710 mem on my 3070.

Stable.

Temps are within perfectly good ranges.

[steady lance]

Now doing +145 core, +710 mem stable.

Gonna try and see if I can do +175 core tomorrow.

[kind walrus]

Ampere works in 15Mhz steps, so you'll be doing +150 actually
Offsets also are temperature dependent, so if the card is a few degrees warmer, then the boost curve will be adjusted down to account for the extra heat, which can mean you'll still be doing +135

Also, undervolting with a custom curve you should have a look at doing
https://www.youtube.com/watch?v=zUkPAVcb9Xc

[steady lance]

reduces graphics power for stability doesn't it?

As far as heat goes, my GPU is only around 67c under load so far.

[steady lance]

Is +170 core stable good?

So far no issues.

[zenith palm]

Depends on what card

[zenith palm]

Only if you uv too far

[steady lance]

It seems 175+ core is what I can do stable.

[sudden torrent]

Before and after install of the new cooler, temps and frequency at the bottom. I held a whole 250MHz higher average at 18 degrees cooler.

And it's quiet as a whisper, can't hear it over my gpu

[trail tartan]

Overclocked my news app uwu

[sudden torrent]

You must have a lot of interests

Wow I ran cinebench and didn't get past 70C, got a whole 200 extra points. I hit 90 before. Finally I won't throttle playing War Thunder.

[trail tartan]

I wish. Just some memory leak I assume.

[sudden torrent]

Yeah it's a common issue, I just uninstall the default apps like that

[short blade]

there's just a lot of stuff happening these days 🙂

[sudden torrent]

Fractal said it couldn't be done. I took it as a challenge.

[mental turret]

anything is possible

that looks sick btw

[sudden torrent]

It's holding steady at 80-81 in p95 smallfft

It immediately hit thermal limit at 90 when I started the test before

[zenith palm]

Arctic b stock?

420mm i hope 😤

[zenith palm]

Can you not fit it on the inside or rad inside fans outside or something?

[sudden torrent]

Yes
Yes
And no the radiator is too tall to fit inside, I even had to remove the bottom dust filter to get it to fit outside lol

[zenith palm]

Sad

Cuz it looks a tad odd without the front lol

[sudden torrent]

I know, that's the most distinguishing feature of this case besides the top mounted PSU. Sad indeed.

On the bright side I'm not thermal throttling in games now

[steady lance]

Are you using the e-atx version of the fractal?

[sudden torrent]

It's the Torrent

[short blade]

i can't help but feel like you've defeated the purpose of buying the torrent

[ancient bridge]

How far u think i can push a 5800x with a 360aio

[proven canopy]

https://hwbot.org/benchmark/cinebench_-_r20/rankings?hardwareTypeId=processor_6349&cores=8#start=0#interval=20

[ancient bridge]

Wow 5.9 ghz without ln2

[proven canopy]

That is on ln2 - they just didnt' bother filling out that field

[ancient bridge]

Ahh ok

I was gonna say

Danm

[proven canopy]

I could maybe see a chip doing 32m 5.9 on dry ice or something, idk

Probably not

[ancient bridge]

Should i just use pbo or automatic oc

I guess since im still new manuel oc

[kind walrus]

PBO+CO

[ancient bridge]

Ok thx

Yea i was using that for a bit but my cooler wasnt great lol

Part of the reason why i bought an aio

[proven canopy]

For daily - yes, absolutely pbo+co, for trying to get an r20 score - you're probably better off with a fixed core and voltage - it's up to you how much voltage you want to run.