#building-and-recc-chat
1 messages · Page 1247 of 1
thank you
Afaik G15 is just the 15in model and G17 the 17in model
Where's my g19 :lul: 
it isn’t working so i’ll just resort by going to micro center and getting a diagnostic 👍
thank you for your help 🙂
You're welcome, hopefully it's something minor
send you a dm bro
b550 aorus elite or elite ax v2 will handle it better for 5900x, 5600g
will elite get it done
please consider getting a new case soon, depending on your motherboard you may be giving up a lot of performance by being forced to put your graphics card in the wrong slot
I have a high-midrange b550 and the second x16 slot only has 3.0x4 bandwidth
I can't tell what mobo it is besides that it's MSI
Yeah I think I might go out tonight and buy one from micro center
elite and elite ax and v2 are basically the same, ax just has wifi
not familiar with the case selection at micro center but preferably look out for one with a mesh front
little known fact: graphics cards, like humans, typically enjoy breathing
?
huh
what about it?
@earnest olive ^ spammy stuff
they also in #846508336543301653
probs kicked.... even tho they still has role which is weird
Hi people, quick question, so switched the coolant from my pc, and now it doesn’t boot anymore… any help? 😓
Wow… ok nvm… after 30 mins I got it…. Just had to write in the chat I guess ahah
Hey installing a m2 to my pc and cant find the screw to hold it in place is it needed for the m2 go work?
I mean tape would do but I'd only do as temporary thing if you had too
If they can't find the screw, chances are they don't have the standoff
If they don't have the screw, they can use a motherboard screw, same thread pitch and size
Oh in my experience the standoff was preinstalled
"Modded" discord
Is there a thing I can plug a hdmi or display port into that will let me screen share my phone to my monitor
Canceled 5900x will stay with the 5600g for now
Anyone used corsair fans with the hub and know why my rgb wouldn’t be working?
How many RGB fans are you using?
This is the hub usb plugged in right here. I don’t think that would go anywhere else. I have it plugged into a usb slot.
- The side ones. My top fans aren’t corsair or rgb.
Alright so Corsair hubs have to have the fans plugged into port 1, 2, and 3
Or else they will not work if plugged into random ports
also make sure the hub itself is connected to SATA power
I had them in 4,5,6 you can’t just do that? It literally has to be 1,2,3 if no other fans?
Correct
So I’m looking for a video and photo editing good GPU CPU combo what would you guys recommend and let’s say 2000 USD budget on those 2 components
what resolution are you editing
because you can pretty much get "anything" for that price
At the very least 1440 most likely 4K
And I assumed basically anything I just wanted to know what works best
i dont know much on higher end pc's so its best to wait until someone like pato is online
https://pcpartpicker.com/list/8DsnsX pato made this yesterday, i just added the ssd, work the gpu around this
you have quite abit of nudge space for it
go with like a 6900 or 3080 or whatever you can get for a decent price
Why 12700k
you tell me
once again you tell me, its pato's build for someone not mine
they arent gaming
This person is asking for just a GPU and CPU, not a whole system
well i imagine they might
well if they need a gpu and cpu combo they would need a new mobo if they went alder lake
How do you know they have already bought a motherboard?
are you dum?
If they are asking for CPU suggestions they most likely have not bought a motherboard yet
"they would need a new mobo if they went alder lake"
"new motherboard"
yes
.
idk if he has one so i just left it
are you dumb or are you just purposely not reading what im saying?
THATS EXACTLY WHAT CODY IS TRYING TO SAY
Lmfao
There was no reason for you to be disrespectful towards me in the first place
I was simply explaining what they were asking for
Thanks
because you're repeating yourself. i said i left the motherboard incase they needed one and you kept saying "they most likely have not bought a motherboard yet" and ive been saying "they would need a new mobo if they went alder lake" so whats the point on commenting when you are just repeating what im saying :/
literally makes no sense
and i literally said that a few messages ago and they still repeated themselves :/
literally makes no sense when i say they might need a new motherboard.... learn to read before commenting 
literally makes no sense to send them a list of an entire PC when they are just asking for a CPU and GPU combo.... learn to read before commenting
what's going on here

i literally said "i dont know what they need so ill just send a link pato said" you literally have no idea what is going on here when you're part of it
🤡
you literally have no idea what is going on here when you're part of it
do you know how heavy your workload is on CPU or GPU?
some video editing is more GPU accelerated, some is more CPU accelerated
so the correct answers could be threadripper and low end GPU or alder lake + 3080 depending on that
Alright
is an intel i5 gen 3 still reliable?
i mean it would probably run
thats a start
xd
Heyy, I want to buy a laptop and I can only afford one with a 1650. do you think it would be wise to wait till next year and save for a rtx series equipped laptop or should i buy the 1650 right now. My main question is: Are laptop prices gonna go up?
depends what you're doing on it
i ment that as a joke btw but ya
i am still running that
so is chillen
it can still be reliable
he has a 1080 and a i5 3rd gen
lol 3050 and 1650 are not that much different
i have a intel i7 gen 1 sitting behind me lol
they kneecapped the 3050 by keeping it at 4gb vram
maybe 4050 will have 6gb
watching 3050ti lose to mobile 1660ti by so much is sad
LOL
i have a 2060 with mine
drippy lol
lol
@topaz kestrel I'm not that much of a gamer, but being able to game a little on the side would be nice. i am into game development and programming in general
im pretty sure game development is more cpu heavy
@earnest olive i am not too far off right?
depends
unreal engine has entered the chat
need a gpu to test your own game
or just get a friend
xd
geforce now
i doubt geforce now will work for random games
lol
it won't
how much is your budget? people may be able to help a bit more with some more info like budget and country
I'm still a beginner, so i won't be developing games like call of duty any time soon. Do you think that a laptop with the following specs would serve for the following two years:
Ryzen 5 5600h
Gtx 1650
16 gb ram
thats more beefy than i was expecting
what's the price
if it has a hdd try and buy a ssd or an nvme if it has support
and if its not overpriced
lol
@topaz kestrel around $800. I live in Lebanon, prices are highly inflated and the economy is crumbling so saving up money is extremely difficult
im pretty sure some 3050 laptops are 900?
oh yeah I heard
not 100% tho
@earnest olive 750 plus an 11% tax so 800 ish
did you not read what they just said
i was just mentioning
you can't expect US prices in other countries lol
oh heck yeah it says lebanon lol
how's the storage and screen?
i did not see the country xd
prolly got a 240 and a hdd, its 1650 times
what is a 1650 laptop compared to in desktop form?
8gb soldered ram with no empty slot is a disaster
but 16gb hopefully dual channel is good
the lower power stuff usually isn't too far apart
ah
probably desktop 1050ti level
@earnest olive i think it has two dim slots with one 8gb stich installed
oh so it doesn't come with the 16gb? just expandable?
still not the end of the world as long as it's expandable
i think they mean it has 16 but has 8gb in each slot already
not sure tho
unless it is 8gb
Yes But i plan on expanding it right away if I buy it because 8 gb is not enough for anything nowadays
@topaz kestrel it has only 8gbs installed with another free slot
yeah as long as it's expandable it's okay
where's the joke
So do you think it would be enough for loght gaming and some beginner to intermediate level programming for the next two to three years?
Light**
most likely yes
Yess
perfect
if you play esports that's important
1650 has enough power to run stuff like league at 1080p144 easily
1650 gang?
i mean im pretty sure a 710 can run league at 1080p144hz xd
Thank you guys♥️♥️
np, good luck :)
i underestimate league
very much so
i mean makes sense since 5600g is like a 1050
the magnitude of difference between a gt 710 and modern igpu is as large as 1050ti vs 3080
not even close
tops out at around 1030 level with good ram
i thought the 1050 was similar to the 1030 ngl

lol
it's literally a 2x difference between 1030 and 1050
is it not pascal? GP108?
yes it is
hehe GK107
imagine
really is just a straight up rebrand
an people dont batt an eye

very easily
i can do 100+ fps in csgo with my 850m, almost maxed but 768p tho
but it stutters
cause my cpu is apparently too weak for it now
back in 2019 it never stuttered once kek
the game keeps wanting better and better cpu
So I asked earlier but turns out I had my cooler in celsius. In fahrenheit my cpu is sitting at 70-75 degrees only running at like 5%. Is that hot?
celsius is the only measure you should monitor computer temps in
thats 24c
you can go up to 180F just fine
Aight so no problems then?
Well finally mostly finished my build. Trouble shot that top fan for a while and it runs but the rgb doesn’t work so that sucks. :/
sounds like you should return it and get a new one
if you're going to pay $40 for an RGB fan it better at least work lmao
Yeah I was going to. These corsair fans be expensive. Why I only got 3.
lol my 360mm aio with 3 argb fans + 6 argb case fans cost me $49 total
and I don't have to use icue to control them
What rgb software could control both my corsair rgb fans and gskill ram together?
Openrgb
I don't think openrgb can control corsair
It can
I downloaded that and it looked complicated but I could take another look at it ig.
corsair wants you to use their proprietary garbage and buy their proprietary $90 RGB controller
interesting, do you have a source? it doesn't work with my corsair keyboard
works with everything else I have
It does with some tinkering
What keyboard?
I don't think this openrgb is picking up my gkill ram
strafe mk.2
Lemme see
Nah that didn't work. It only even changed my keyboard.
You ran as admin yeah?
The exe?
Have you tried clearing all saved hardware profiles through icue?
Nah but now I did. It picked up my monitor now too but still applying color settings isn't applying to anything.
no
do i really have to install icue

Yeah to clear all the hardware profiles out
Is any other rgb application running:?
alright i'll trust you and try it
if it works we're even for the ram timings lol
oh god icue is open on my pc i feel sick
I smell sexy shut up
prove it 😳
wow it actually works
Pog!
rawr too smart for dis world
it can only do solid colors
but that's good enough
oh i can do static per-key
very interesting
i love openrgb even more now
And like deselect and select all
Its the best for sure
Aight closed out of all of my lighting apps. Openrgb is only affecting my ram now not my fans.
My disgustingly rgb fans have 30 leds inside em lmao
Uninstall all other lighting apps
Not just close
now to uninstall icue again
Lmaooo
can i use openrgb to turn my strix rgb off?
are effects supposed to work?
Yeah
Yep
W
maybe need to uninstall icue then run as admin
i installed it in a properly named folder
LMFAO
get off my pc immediately
bruh i keep getting popups that my phones have been disconnected and aren't responding
i transferred pictures between them like 2 days ago
do i just need to restart to make them stop
try it
how do i do this
You use the effects plugin right?
lol
I've basically only used solid colors lol
I'll probably still only use solid colors
why do u want effects anyways? they hella stinki
stawp tryna hack us >:((
i rarely restart my pc
And select the dll file
New tab will be available
After installing the dll
Just select an effect from the dropdown on the left
And send it using the stuff on the right
And the start and stop button
Dont tick that one then
Because open source so it gives you options
You can decide if u wanna kill it or not
execute order 66
Yeah
Lots to choose from
okay okay theyre not that much
Each effect has further customisation
no it cannot
Yes it can
no it cant
im the source
i tried it literally first thing
before even installing ICUE
it cannot control fans
Its literally working on sippy corsair keyboard
on their controllers
Right now
yes but thats entirely diff than fans
fans are stinky
Yeah it can
it did not work properly on their fans
if it doesnt work out of the box its kinda pointless then lol
icue really isnt that bad despite what people say
its worked fine for me so far, however i just set one color then go
Thats more of a you issue than an openrgb issue tbf
wet
u shouldnt put rain near ur keyboard
it dangerous
Openrgb settings is not where ur supposed to poke around in tho
where am i supposed to poke around in then
What fans and what controller?
node core, SP120s
1 sec
wow
even applying to all devices straight up doesnt work
i was worried this effects plugin would increase system resources
opening as admin doesnt work
i just checked google and it is possible to use nodecore and sp120s 🤷♂️
On the pin that its connected to
now how does one do that
Resize zone
Select where its connected to
The hub that is
And resize to +20 per fan
What did u do
i tried an effect on my ram and it got stuck
You did stop the effect prior right?
icue is just so simple though
yus
for us mindless baboonz
Icue was probably interfering
icue was closed
Clearing hardware profiles ifg the controller has those and then uninstalling it could help
But yeah little bit of tinkering and openrgb is cool
huh now it works
Lmaoo
ORGB is def still buggy and not ready
Nice
Any effect or just one of em?
idk i only tried rainbow wave
Try some other
Personally radial rainbow is the coolest
at least it's not permanently broken
Followed by rain
Yeah
that would suck
Yeah
esp considering how good of a bin these sticks are
ORGB is def weird
not ready yet
its getting there
slowly
needs a whole new GUI and settings system
I like the current ui
I just started as admin and it's detected again
Lol pog
that's weird I set the exe to run as admin in compatibility settings
radial seems to work fine
it's just rainbow wave that gets stuck
Radial looks cooler too
Btw you can do rgb colours based on temps and usage and stuff too
Takes more rams and cpu to do it
But kinda cool
huh now rainbow wave isn't getting stuck
I definitely like wave more than radial on the ram
lol
wait the effects plugin gets rid of quick colors?
sad
and fast profile switching through right click
maybe this isn't worth
is ur gpu brace rgb aswell lol
yeah
If you look at colours, its actually just changing em really fast
Devices and toggle led view
no like it changed the right click menu on system tray
how do people even sit next to PCs that look like this lol
I'm gonna try gaming next to it
Yeah but for all white like you usually do you can use the quick colours thing
the quick colors option disappeared tho
Strange i still see it when running effects
Nice IDE cables you have there. I feelt such a sense of nostalgia.
IDE?
issa joke. The power cables. Whole setup looks pretty clean though
lol I definitely prefer the rgb in solid white
Is this a good deal and how much FPS? https://igamingcomputer.com.au/products/i-gaming-computer-gtx-1050-ti-ryzen-5-3600?variant=42075424129239
Bad deal and in terms of fps, there will be fps
What would a good deal for this budget be? Around 1.3k AUD?
Not seeing anything thats nice for that price tbh
So you reckon just wait or?
Horrific, for 100$ more you can get an rx 6600 pc
link that rx 6600 pc then
https://www.centrecom.com.au/buildpc/247912 $1425 aud actually
Ty, does i5 come with stock cooler?
Yes but it will be fine
You could always upgrade later on if you would like
just ordered a new monitor cant wait 🙂 hope my pc can run it
better to get gigabyte rx 6600 instead of asus?
I don't even see a gigabyte 6600 but just get the cheapest one doesn't really matter
not on the exact website cause getting individual parts
because the gigabyte has 3 fans
or does bigger=better not work here
also would the cpu bottle neck?
Well it's cheaper to get the prebuilt
Nah just the cheapest
how so if labour $110?
Nvm, do this then https://au.pcpartpicker.com/list/K8BGmk
No case or am I blind?
Sorry it disappeared for some reason
Also is CPU bottlenecking?
No
@fossil cedar would a 1650 do just as good of a job?
Not even close
6600 is twice as good as a 1650
Got a new keyboard 16 more gigs of ram a kvm switch and a new rgb desk mat
For Christmas
When I enable docp and save it doesn't save I don't know why
What is the rating for your ram?
What cpu?
Ryzen 5 2600
Should be fine yeah
It's capping at 1600 in task manager
Are your ram sticks in slots 2 and 4 if you count left to right?
Yep
Task manager?
It's saying 1600?
Can you download cpu z and use that instead
In task manager it shows 1600mhz
I don't believe task manager for things like that
Either it's reading it as 3200 but showing half because it's ddr so double data rate ie 1600mhz = 3200mhz but really it's 3200mb/s or it's just misreading entirely most likely
Download cpu z to read it first
It's more reliable
Thanks
That cpu is fine for a 3070 at 1080p
That word is thrown around so often huh. It's like getting 10% less performance than a better cpu = bottleneck. 
Nem, stacked screens appear odd at 1st but I like how the desk space is obviously same as 1 monitor. Plus, glancing up for a sec seems better/easier. (Depending on use also)
Hello, I am having problems with my computer. I tried upgrading my CPU from an i5 10400 to an i5 11400f. I switched to the i5 11400f, but the computer didn't turn on. Then, I switched back to the i5 10400 because I thought that i needed to update my bios and the computer turned on (fans turned on, LED lights turned on). The computer turned on but it didn't post. The cylinder on my case was no longer blinking. Does anyone know a solution to this problem?
1, that's a minimal upgrade idk why you'd bother, just return the cpu tbh, 2 try clearing cmos
ok
ill try that
so, do i just take it out and put it back in?
The battery? Take it out, unplug the pc and wait 5 mins
ok
That did not work
any possibility that you bent some socket pins during the cpu swap?
by cylinder, do you mean the hard drive activity LED?
yes
i have no idea
there are no pins
do you mean on on the motherboard or the cpu
Either, it's possible.
i’ve been switching my parts over to a new motherboard, and everything seems to turn on but there’s no display onto my monitor. i need help please, idk what to do
i can see that one pin is bent
is that enough to mess everything up
Possibly. Each pin goes to a specific "dot".
motherboard
some pins are more important than others
if your pc is not turning on it's probably an important pin
see if you can bend it back using an empty mechanical pencil
or any other tool you think is appropriate
good luck
thanks
hopefully i can fix it
but are they suppsoed to be striaght
yeah if it's not fixable you just need to get a new motherboard
or slanted
just match it with the other pins
ok
the pins that is bent is under a pin that isnt so its impossible to get to unless i bend the on ontop
so im just going to buy another motherboard just to be safe
I built my pc and I’m having trouble installing windows. The usb with windows is plugged in and windows won’t install I’m not sure where I’m going wrong
@fossil cedar so.. my sister asked me to come up with a pc.. for her kids, is a 1050 ti worth getting or should i look at a pre built for her budget of 1100?
prebuilt!!!!!
Ok thanks hun
https://www.newegg.com/abs-ali570-master/p/N82E16883360205R id get this, wayyy better if you dont mind open box
My pc isn’t booting from sleep. Is that something i have to fix in the bios? I have to turn it all the way off and then back on.
ill let her know
Try hibernate instead of sleep. Curious if it still doesn't turn on like from sleep. If you use ssd, sleep isn't recommended anyways. Power out when using pc might lose file(s) & full boot is quick enough
That would be windows settings prolly tho wouldn’t it?
Should I switch wake up event to “OS” in bios instead of “BIOS”?
Maybe that could be it?
Actually nah i left it on bios but resume from mouse and any key for keyboard. That sounds like what i want i think.
Maybe, but it's a general option. Go to shutdown, does it not say hibernate along with sleep shutdown restart? Perhaps you don't have hibernate on though lol, not sure the easiest spot to allow it.
Mouse/kb is correct. Deffo a windows settings to try hibernate.
Aight ill boot into that once i find and enable virtualization as well.
I use sleep and/hibernate a lot btw. Trying to recall where in windows to show hibernation on the shutdown menu.
PC is fully off so not gonna turn on until later tonight after back from a small get together
Sweet. Got that changed. Should hopefully work now. 👌🏼
Did you just mean kb/mouse click wouldn't bring it out of sleep? I've had that issue, but not for a while. Let's see if it works in hibernation though. Safer and barely slower.
Oh! Sometimes it might've been a certain usb port that has no power w/ pc "off" or something.
Power options, and if it's not there you can run a powershell script
Ya missed this Fal? Lol. I'd confirm but not near pc
Aight boys trying to pull my gpu out of my prebuilt.
This fking mount is really in there blocking the gpu. I have no clue what this is attached to. And it is preventing me from getting it out.
What model? Looks like an older hp or Dell. I can find the service manual.
It’s an hp omen.
There's like 400 different models of those
Trying to find exact model.
Aight so it's the OMEN Desktop PC - 870-255xt @potent portal
right now I have a ryzen 5 cpu and putting in a ryzen 9 - do you think i can get away with using the fan that's on my 5 right now? the 9 didnt come with onew
I really hate hp manuals.
None of them acknowledge the existence of a gpu or that bracket. It appears to be attached to the dvd drive tray, though.
What is the cooler and what is the cpu you’re putting in?
If you mean the stock fan, then you can use it for light tasks but not anything more intense like gaming. It'll overheat and throttle very quickly. You'll want a good air cooler like the fuma 2 or a 240mm liquid cooler minimum.
right now I have a Ryzen 5 3600 and i'
would be replacing with a Ryzen 9 5900x
No real need to go above the 5800X if you're just gaming btw. Even for streaming and multi tasking.
5900X is only like 3% better for games
i'm a designer so i do animation/video work as well - i have the cpu already as a gift
but that liquid cooler would be the best bet you reckon?
That works then
Yeah, and if you can fit one I'd even do a 280mm or 360mm liquid cooler. Arctic liquid freezer II is great and pretty cheap.
And I'd update the bios too, older versions might not be 5000 series compatible
5900x with a wraith stealth sounds terrifying
yeah i've already updated the bios
@potent portal would you be able to recommend anything space wise
cyberpower case
you are going to need a new motherboard
this is not going to run a 5900x
bare vrms with what, 6 phases?
i mean it'll run but you are going to lose a lot of performance from your motherboard trying not to catch fire
the motherboard is prime b450 m-a
Oof yeah good catch. That thing might just melt on an all core load.
oh no, totally get it
also, that cooler i believe is worse than the wraith stealth
story was - pandemic started, wanted a pc, got a pre-built, added some upgrades here and there
if i were you i'd pull the motherboard with the cooler and ram left on as is, take out your storage and gpu, and try to sell cpu+mobo+cooler+ram bundle
get a proper matched ram kit
mobo beefy enough for the 5900x
and a better cooler
ssd and gpu can be kept
might wanna check what power supply it is, you'll be adding about 150W of cpu power draw during an all core load
and the ketchup and mustard cables don't look terribly inspiring
it might be fine but worth checking
awesome help @potent portal @earnest olive thank you
np
now i have a hdd and ssd in addition to the m2 on there
assuming that's 32gb ram you can probably sell the bundle for around $260-300
$140-180 cpu, $50 mobo, $70 ram
no, cyberpower uses an ARGB controller in the back for the fans
i recently worked on a cyberpower prebuilt
in theory, i could replace the mobo and plug everything back in as is or would it take a bit of finessing (as long as the power supply is decent)
yeah you could
what speed is that ram running at though
mismatched ram often has trouble running at higher speeds
and ryzen cpus really like fast ram
Building my pc rn and there seems to be a problem with the mobo. I'm using an asus prime b560 plus and the gen 2 seems to have a pin missing
Can someone let me know if this is how it's supposed to be. It's my first time building and I'm kinda confused lmao
gen 2?
A pin missing where? There's literally hundreds of pins in dozens of places on that board
as in gen 2 argb header?
dd4 3200 pretty sure
the pin is supposed to be missing for an argb header
3 pins
5v, blank, data, ground
take a pic of what you're asking about exactly? but I'm guessing it's argb header
Idk if I can post pics here lol
You can
is it actually running at 3200 though?
Ah ok thanks
Lol I thought I broke it or something
since, well, bad things will happen if you try to plug a 5v fan into a 12v power source
most likely not
the 5v argb plug will break the 12v header if you try to plug in
instead of just letting you plug it in and cause a fire
I hope I dont end up plugging something where its not supposed to xD
if the system is booted right now, it's pretty easy to check in windows
There's so many places to plug stuff tf
just read the manual and/or watch a build guide and you'll be alright
the manual tells you everything you need to know to build it
it's not too complicated once you get over the mental block of "oh shoot i'm going to break something"
Yea thats what I'm worried about
Took me 5 mins to put on the cpu cuz I wasn't sure the arrows were lined up properly
😂
lol 2133. i think the mismatched ram is the problem lmao. one's probably running at a lower speed
It's very unlikely you'll break something unless you really force it
Well the ram took a little force to go in...
yeah probably
A little force is fine, just not breaking it in half force
That black part on the mobo when you install the cpu is supposed to come off right?
depends on the cooler
The intel socket cover? Yeah that comes off
Yep that's the socket cover
Do I just throw it away. Some vids said I should keep it, but idk
Keep it, you'll need it if you ever sell it or send it for repairs
Ohh ok thanks for the help yall
I'll prolly come by a bit more for questions. Hope yall don't mind lol
Most manufacturers require you ship it with the cover on the socket, keeps pins from bending in shipping
welp that's annoying
the blue part of that led is just dead
just power cycled my pc didn't get it unstuck
Oof. New strimer time?
yeah guess i'm going to have to RMA
well looks like i'll be hitting up microcenter a bit tomorrow
i took off the side panel but i dont see any indication of what type of power supply it uses
:/
It's required to have a label that says the exact model and what each voltage rail is capable of. It's probably just on the other side.
Ok, with which gpu? I don't remember if you said
Gpu, not cpu
5600xt
600W should be fine then, even if it's really a 500W in disguise like some prebuilt ones.
Merry Christmas, not sure if someone provided any feedback, what do you guys think of the new Lian Li O11 Evo? The snow white is so nice compared to just the O11 white.
I think it's a good step up. It's nice they're continually improving their designs, especially given the popularity. They could have just left it and stagnated, eventually being surpassed (like intel) but instead they're still improving tangibly.
Amazing man thank you!
Thank you! they don't have it in Canada, so im pre-oredering it from newegg from the states and trying to get it here some how... i really like the all white look... I did get a pretty good price on my O11 white for $169.99 CDN before tax
Does it matter which side the fans are facing?
that depends on where you want to intake, and where you want to exhaust
that the meshify c?
Yes
yeah, so intake through the filtered front, so the fan stickers should be facing in
then exhaust out the top
so the sticker should face up
so the opposite of what you have in the picture
i would put intake fans first
then use any additional fans as exhaust if you have them
I dont have them yet. Going to buy a 3 pac in win tomorrow
Pack*
So those would go in the front
And the 2 provided by fractal will go in the back and 1 at the top
what cpu cooler are you using?
if thats gonna be facing backward, then you dont need to put fans at the top
So that fan is facing the front
hold on to it
or
you could put it at the top rear
and leave the top front empty
because a fan at the top front would do literally nothing
and would only be worse
So like that?
yeah
thats an option
but having the fan there isnt really bad
i think it would be good to put it there
but not at the front tho
that would actually exhaust the air that was just brought in
What if I just put it at top front but in a pull config?
an intake there would draw in unfiltered air
and also heat rises
so it would just make airflow wack
Oh true
Ig I could just leave it
I plan on putting an nzxt cooler in the future anyways
That would go top right?
a 240mm rad?
Mhm
And for the rear mount, the fractal logo is facing inwards right?
Or wait
It's facing the outside nvm
yees

I'm also confused as to whether I need to use standoff screws for my mobo. None of the vids I watch mention anything about using standoff screws
They just screw the mobo in using normal screws
Nvm I figured it out 👍
Yeah hopefully nobody tries to screw a mobo down w/o standoffs and short out alll kinds of stuff.
Just had to use the old common sense lol. Literally can't put mobo without standoffs unless I bend the mobo so yea it was obvious I had to use standoff
I never tried to 
Wierd non of the vids I saw put any attention into mentioning this
I didnt either I just figured with how the case looks like 😂
Just like showing an aio install but not showing back plate being installed. believe or not that actually stopped some people from doing it right.
Don't get be started on another shield
This thing was such a nuisance to install
That's why many modern mobos have it connected already
They have these wierd metal parts that stand out of the aio shield and they kept going inside the hdmi output everytime I lined up the mobo
The number of times I had to take out my mobo cuz it was blocking some output
mhm, gotta mess w/ em sometimes to be right along the "body" of the ports
Reason: Bad word usage
WHAT...I didn't even...x.x
https://tenor.com/view/captain-america-marvel-avengers-gif-14328153
haha - wtf. Why does it add the link when I edit this message from having no words
once an actual word and another was avoiding filter
Btw I hope my mobo isn't touching the case. It looks like it's real close to touching it at the bottom
btw I delete gifs sometimes just because they take up a bunch of screen
just close on far right edge? all screws in ? then good
The fact the mobo isn't completely parallel to the bottom of the case is setting off my ocd
same
I almost wanna take scissors and just...yknow straighten the mobo
Just cut a little off the top yknow
Now I gotta figure out where all the wires go
This is probably when RTFM is a fine step.
Pretty sure it's like Legos right? You just stick em in and if they don't fit, you stick em elsewhere? 😂
some have some-what specific spots
Pray for my pc lmao
Hi guys I’m wondering if anyone here know how to remove chg9 shell from it base
yo i need some help
!ask
so i have a msi b550 gaming edge mobo and have two samsung nvme ssds
and its not reading my second ssd
ive tried to allocate it and stuff but it still wont read it
@umbral portal put your gpu in a different slot and try again
just to test
imi just wondering
xd
also try clearing cmos
will try ty ty
This is written in motherboard specs
When installing devices in M.2_2, PCI_E2 & PCI_E3 slots at the same time, PCI_E3 slot will be unavailable, and M2_2 slot only supports PCIe x2.
AMD B550 Chipset
6x SATA 6Gb/s ports
2x M.2 slots (Key M)M2_1 slot (from AMD Processor)
Supports PCIe 4.0/ 3.0 x4 1
Supports SATA 6Gb/s
Supports 2242/ 2260/ 2280/ 22110 storage devices
M2_2 slot (from AMD B550 chipset)
Supports PCIe 3.0x4
Supports 2242/ 2260/ 2280 storage devices
The supported specification depends on installed processor.
WOAH THAT WAS WAY LONGER THAN I COPIED
@umbral portal
Ty xd
@umbral portal any of that help you out?
so my computer wont post and i took my ram out while it was on by accident so i could move it to a different slot. is that bad?
snd when the cylinder is blinking, deos it mean my hard drive is being used
because it wasnt blinking when i took it out
idk if that would make it safer
I think if you remove your ram while your computer is on it just crashes windows… Im pretty sure it doesn’t “break” your computer but i also don’t really know what im talking about
And what cylinder are you referring to?
The HDD activity LED light shows when your HDD is being used
You should never remove your RAM when your computer is still running for multiple reasons
One big problem is there is a chance the electricity running through the RAM while it is turned on can arc and destroy other components
Anyone have an opinion on NZXT cases?
P360A, P400A, P500A, 4000D Airflow, 5000D Airflow
Lian Li Lancool II Mesh
MX330G Air, Metallicgear Neo Air if you want something cheaper
I like a few of those Corsair cases
I don’t need a cheaper case, looking at prebuilts and wanted to make sure whatever I buy has a descent case
Fractal design cases are usually solid also… just not great fans
Looks like most of the prebuilts on site aren’t offering those cases as options
So for some odd reason my pc wifi doesn't work after I updated the Lan driver and cannot fix it
It worked before
Does the troubleshooter say anything when u try to run it on the wifi adapter?
Need help with attaching cables on my pc (it's my first time). Im using the seasonic focus gold fully modular and wondering what's the difference between cpu/pcie E1 and cpu/pcie-E
I'm guessing the e1 is for the 8 pin cpu on the mobo and the pcie-e is for my gpu?
I’m looking for a gaming laptop with these specs: Operating System: Windows 7 or greater (64 Bit Required) Works well with Win 8.1, & 10.
Processor: Min Spec: Intel i5 or i7 processors (AMD processors not recommended)
Memory: Min Spec: 8GB system memory
Recommended: 16GB for best performance
Video Card: Min Spec: Nvidia GTX 1050 ti or greater (AMD GPUs not supported)
Recommended: GTX 1060, 1660 or 1070, RTX 2060 Premium: RTX 2070 or 2080. Any recommendations will help! Thanks!
Imagine still bothering w/ a hdd light. I just glance a task manager or notice if pc was frozen. Actually, my hdd light used to be super bright
Yes. Nowadays mobos might have dual eps ports for more CPU power, that's why the they made some extra psu spots that could also do eps (with a 2nd cable) if needed.
Budget though? If $1100ish glance at this.
https://www.newegg.com/core-black-msi-gf-series-gf65-thin-10ue-071-gaming-entertainment/p/N82E16834155716
whats your budget?
@strong raft ah thanks
Plugged all my stuff in. Lights are on on motherboard. CPU fan not running
-___-
Any chance someone knows the problem
Also I'm confused as to which direction the psu should be. Fan facing towards mobo or opposite?
Besides no gpu? Missing mobo screws & check all power cables Xtino
I'm guessing fan faces up?
Fan down if there's holes in the case, and it won't fight for air with gpu possibly
There's holes at the bottom but there's an air filter covering the bottom holes
Is that alright?
Exactly, filter so psu stays less dusty
Alright thanks
Case not right on carpet is highly preferred of course, just saying. I even made taller case ft
rear exhaust fan is backwards
Wasn't even the worst part of this pic to me... (good catch)
Any other way to make this cable look cleaner?
This 24 pin sticks out like a sore thumb
Pull the cable more into the back of the case
That's decent to most people. Not w/ stupid "180" mobo port. There is a 90degree adapter we can buy I've heard.
That's a fat cable. If I pull it back, I can't close the back plate of the case
I have heard of extension cables but idk if I should play around with those especially since idk how their quality is
I did try to but since the cables sticks upwards instead of sideways like they do in some mobo, it still looks wierd
Plus I have that "I don't wanna break anything" mentality 😂
I was gonna say unplug then try to pre-bend near the connector & reinstall. I wouldn't use cable extension if I could, but a lil simple 90° connector would rockm
Holy this thing won't budge lmao
Oh well
the chance of you breaking anything are so low
"Flat" cable would curve so easy. Idk why all cables have to be round like this
Pulling this 24 pin feels like I would snap the mobo in half before I can get this thing to budge
Don't pull it much while connected. Try what I mentioned
plugging in the cpu power was worse for me
and unplugging it
that stuff was hard
Cpu power was alright although hard to reach in the small space
yeah that
I want psu top of case back
i don't even have my cpu cooler plugged into the cpu fan port on my mobo
you can use literally any port u want btw
that's for fans
even aio
I meant like try to bend super closer to the connector end so wire doesn't curve out so much
GOT IT OUT
good job
Also can I just wipe the sweat on my mobo with any cloth?
Lol, yes?
My hand sweat alot more than I expected while trying to pull it
Your mobo is a zebra btw. Cpu hsf looks good.
oh you were serious
Yes...
yes
Can't see the depth but seems near perfect wire bend just like I thought of. This is where 38mm thick intake fans would fit, lol. They're expensive
I really don't get why mobo power doesn't often point forward like sata ports
I think they do in expensive modern mobos no?
a little help here guys.
Recently i swapped my MOBO Ram and cpu.
cpu from 5800x to 5950x
Ram from 32gb to 128gb
and mobo from asus tuf x570 to a Asrock x570 taichi
i am using the same GPU 3070Ti and PSU 850w from corsair
Now when i open This one game my GPU usage goes to 100% and temps of 90c 2 minutes into the game the pc restarts... The game is Ark:se
I just ran the Heaven Benchmark on ultra settings and it only used 40% of the gpu and ran smoothly for about 10 minutes, temps of 50c.
Could it be a corrupted Game file?
Ark is very famously unoptimized so it's not too surprising, but maybe it could be worth looking into repasting the GPU
Heaven is also very weak nowadays to bench the GPU core
Heaven is useful for vram but you'll want to do superposition if you wanted to stay with unigen, 3dmark time spy otherwise
why did i never had issues with that gpu before tho?
Idk, it's that rare



