#building-and-recc-chat
1 messages · Page 1158 of 1
FOR THE LOVE OF GOD AND YOUR WALLET
Return it right away
PLEASE RETURN IT
this is worth about 1500 USD
A build that price should be worth less than 1.8k
my friend literally has the same build for around 1 grand usd or so
They just list a bunch of bull to make it seem like a lot
literally the same things but with 16gb ballistix ram
that means they gotta get fe and not 64gb but i meann
Lmfao it comes in a wooden crate
eh, FE is fine
just impossible to find
Okay Im having an hard time trying to put the SSD card in
lol true, he did have to go to best buy at like 5am
Its not sticking in even if Im wriggling at an 30 degree angle
3400 should get you a custom loop 3090 5900x anyway
Well dang an vid told me its recommended to wriggle lmao
Ope
It more a pay overtime thing for me. I would return it but I needed a computer to do work and it involes gaming.
My bad
Dude you are literally getting scammed out of thousands of dollars
theres literally less expensive options out there for better parts
But the person called told me to wriggle it and he told me its right card lol
but i mean, you can waste your money if you want
could save around 2 grand or so
unless, of course that's pocket change
you just gotta slide it in
if not directly 45, try lower of higher angles of attack
Gonna try to do that
also make sure you didn't flip it upside down
just make sure the notch is aligned with the uh
the thing
god, i'm bad at explaining
you can legit by that pc on newegg for 1400$ just 16gb ram instead
and not an aio
ABS prebuilts
Well can I ask if the SSD I have fits with the PC? @jagged ember ?
its not that you paid 200 more or something you paid 2k more
ABS Master Gaming PC - Intel i5 11400F - GeForce RTX 2060 - 16GB DDR4 3000MHz - 512GB Intel M.2 NVMe SSD
Thats the PC
hm, whats the mobo
I'm totally new at this so half of what you guys are saying confuse me. =w=;
we're basically saying
you're getting ripped the frick off
And my SSD is Western Digital WD Blue SN550 NVMe M.2 2280 1TB PCI-Express 3.0 x4 3D NAND
That's why you should not buy a computer if you don't know what you are shopping for
I'm shopping for a gaming PC o.o
yes
we know
but you can get a much more powerful computer for the price you just paid
well, not just but
you get the point
https://www.newegg.com/western-digital-blue-sn550-nvme-1tb/p/N82E16820250135?Item=N82E16820250135 The link of the SSD Im talking about
what motherboard does the pc have
i know the sn550 tho i have it lol
Lemme see
thanks for the link anyways
B560M mATX Motherboard (WIFI) @jagged ember
Well crap my first gaming pc and I get rip off for it.
https://www.newegg.com/abs-ali524/p/N82E16883360129?Item=N82E16883360129 This is the PC Im talking about
oh
ABS
lemme see...
it should work
it should either way yeah
i looked and it didnt specify
but the m.2 port should work just fine
11th gen chip on a b560 board is gonna mean 2 usable m.2 slots
Okay then
Then I guess I keep trying
Yeah which is nice
I was going in thinking that I can only have 1 slot but 2 is nice
also, it doesn't stick in there by itself, you insert it at like 30-45 degrees angle, you get it in there, press down, and you screw it down
make sure the standoff is already on the mobo
usually the standoff is already in place
you just kinda slide it in
with firm but not destructive force
usually doesn't take much force at all tbh
@vestal garden simple vid
https://youtu.be/2UeWMgjwogU
In this demonstration, we'll show you the steps to install M.2 module on MSI motherboard.
Follow us to get the latest news!
► Facebook: https://www.facebook.com/MSIGaming/
► Twitter: https://twitter.com/msitweets
► Instagram: https://www.instagram.com/msigaming/
is fun
Well like I said I am doing those things but its not sticking in there
it isn't supposed to just stick in there, you screw it in to hold it down
but look at the vid rq, it's just a minute
the usual question, why o11?
Its the same video I saw two times by now but like I said I keep trying
then quickly check what board it is
it’s bc i got the lian li fans on sale for 75$/ each
so why not going for the full combo
some boards have m.2 key E slots for wifi chips, maybe you're looking at a m.2 key E slot and not the m.2 key M slot
because expensive and annoying, but oh well
if you have fans, and are willing to spend extra, o11 is fine
next, why P31 AND a 970 evo plus?
a p31 1tb is usually enough for the usual person
if you need 2tb, could just grab like a p31 2tb
two separate drives can be annoying
970 evo plus got in on sale for 125$
haven’t bought p31
some guys in this chat recommend me that one
p31 is a very good ssd
@vestal garden name of board should be somewhere like here
why annoying?
p31 is good but if you have a evo plus already, leave it
o11 is supposed to be big, then doesn't support that much, 150$ for a case without fans is pretty expensive, and having to add in all the fans is kinda annoying
i kinda like the showing-components look of the case
(I'm still kinda annoyed at how o11 doesn't fit 360mm top mount, and only support air coolers up to 155mm height, and not large coolers that are usually 165mm)
what will happend if I have two ssds in the mobo?
like in the process of building or what?
ahh yeah right
@stoic island B56OM DS3H AC
but like it will show up in my PC as two different folders right?
@stoic island I just send an pic of it to you
I mean they will show up as two disk folders right?
Two separate disks, folders go in separate disks
Lmao
'extremely fast'
'well acclaimed ... 1600'
'ideal pc'
Like
Unless you can't find a GPU anywhere else, kinda crappy deal imo
If it was more like 400-500$, that's be nice
1600 is just sad, cheapo PSU cheapo cooler cheapo everything it seems
rgb blower
Well got the SSD in, but now I have to deal with these small screws to screw the card in
when marketing budget exceeds pc budget
Lol
no way i'd pay $900 for that pc and then have to upgrade the ssd, ram, and psu
lmao
Might as well upgrade CPU too
at that point you building your own
Mmm
👁️👄👁️
1st gen imc sad
everything about ryzen 1000 is sad
do you guys think i did good or bad on my exams
Hey, it replaced bulldozer, that's the not so sad part
I think you got b+
:8ball: | Very doubtful, Mr1111
true, it was a lot less sad than FX
(first time builder here I'm so sorry if this is stupid to ask, but my google searches have proven to be unhelpful thus far):
Must I run Windows 10 (Pro) off a flash drive? Can I use the flash drive only for installation, and if so, what would I need in order to do that? (Flash drive and PC requirements? Could I use a 16gb flash drive for installation, which only has like 15 something available?)
You just need a flash drive for installation, and I believe the requirement is even lower for the size, but the flash drive just need to be formatted to fat32
From Microsoft:
A USB flash drive or DVD. A blank USB flash drive with at least 8 GB of space, or a blank DVD (and DVD burner). We recommend using a blank USB or blank DVD because any content on it will be deleted.
Awesome thanks ^^
:)
Also, I'm running my pc without a Graphics Card rn (I have a core with a Graphics Chip in it) - the tutorials I looked at all used an HDMI connected to the Graphics Card when connecting to the PC for initial setup, and told me not to use a Display Port yet. How would I go about using my monitor without the Display Port (for the initial startup) if I don't have a Graphics Card to connect an HDMI cord to? Would it make any difference to connect the HDMI to the back of the Motherboard instead, or, should I be doing something else?
(again so so sorry if this is stupid to ask! I'm super new and scared to mess something up here 😅)
Plugging into a different video port shouldn’t matter
Basically, motherboard display outputs are for the iGP, and the display outputs on the GPU are well, for the GPU, whenever you have a GPU, most of the time, it'll be more powerful than the iGPU, that's why you'll want to plug into the back of the GPU.
iGPU -> integrated graphics, graphics that's built on the CPU
Since you don't have the GPU, and want to use the iGPU, in this case, you plug into the back of the motherboard
Okay, thank you so much! That's super helpful! ^^
:)
thanks mate
How often is the newegg shuffle?
Normally Monday through Friday at 10 PDT to 12 PDT
Any time
I’ve seen them do it in Saturday’s but it appears to be random and not every Saturday
Okay so I think Im done setting up my PC. All the wires I need connected is just the power and HDMI/Display cord right?
And the keyboard
If you want to go into bios and do stuff
But to just post it yeah all you need is those two
I moved a boot HDD from one computer to another but this other pc is not recognizing it as a boot device, any way to fix this?
@jolly kindle your rams in the wrong slots but the build looks good. (could be my imagination on the ram if it is my b)
And my monitor is not displaying anything 
Finally its on Lmao
monitor is doing the rgb. Most gamers would pay extra for that
wtf
interference from wifi could be that bad? something must be wrong
Yh
hey guys
which one is better in your opinion? G.Skill Trident Z Neo 32GB DDR4-3600MHz or Crucial Ballistix RGB 3600 MHz DDR4 DRAM 32 GB
What's the CL on both? Price too
Crucial Ballistix RGB 3600 MHz DDR4 DRAM Desktop Gaming Memory Kit 32GB (16GBx2) CL16 BL2K16G36C16U4WL (White)
G.Skill Trident Z NEO Series 32GB (2 x 16GB) 288-Pin SDRAM PC4-28800 DDR4 3600 CL18-22-22-42 1.35V Dual Channel Desktop Memory Model F4-3600C18D-32GTZN
first one is better
also what is the pricing on them from where ur getting
ballistix
Hi.. showing off my plans for my eventual rebuild for my pc. Should note: I’m starting with the HDD, the GPU, and the PSU already since they’re in my current rig already.
What's currently in your rig exactly?
Cause 3600 isn't worth it
If the mobo is am4 I suggest eeking out for a 5600G or 5600X
I wouldn't pay that much for a 2070 super
Started with a pre-built Asus G11CD that originally had a 6th-Gen i5 that I first upgraded to a 6th-gen i7.. and 16 gb of DDR4-2133 RAM..
Which is why I bought it two years ago...
If you haven't bought new mobo yet, go with B560+i5 11400
It's better value that way
@final sentinel can you mark the bits that you already purchased as purchased in the list?
do I add it to inventory on PC Part Picker? or what? Never actually did that before..
Got ya, thought you are trying to piece everything together now
Carry on
Configure -> mark as purchased
Gotcha.
https://pcpartpicker.com/list/hCbvBc
Updated it.. Went with the 11400F to save some money..
Okay and do you need/want WiFi and can you return the power supply by any chance?
return the PSU? no. bought it at the same time I got the GPU. do i NEED WiFi? Probably Not? but I have no real way of putting a hard-wired connection in my room. The closest I have is those really sus-looking thing that one end plugs into the ethernet port on my PC and the other is plugged into the Modem for my house Internet on the opposite end of the house.
https://pcpartpicker.com/list/xMcfXb i would do this then
why the Separate cooler? last I checked, the 11400F comes with one..
Because the Intel cooler is ass
This
That's one a few thing you don't want to cheap out on
Dinky little aluminum block with a tiny fan
works for me 
ass moment
I’ve noticed that, and have fixed it! Thank you!
It appears so
I get my cmos batteries today or tomorrow thankfully! Then if that doesn’t work the computer I have will be crap
why is that?
Yes because it is an animal
a donkey
couldnt possibly be a swear
I am gonna ride my wifes ass all night long. The market is far away, and I have to get there by morning.
what happened to ur ass?
my boss rode it into the ground
You should call animal authorities
yes yes
PETA
the animal authority you have to call the animal authorities on 
That's who I was thinking about too, lol
Great minds think alike 
Aye
Congrats
nice 3080
Ayyyy congratz
60 cough
Hard to see from the reflection
Thank you, I almost couldn’t get it. It was the last one 😅
It’s a 3060
I think tri force
not bad card
Ik
I was gonna just go get a 1050 TI at micro center or a 1660 on Amazon of I didn’t get this
Just really happy rn
It's a gaming x trio, v premium card
premium price too

The card is supposed to be around 450 even in these times
Gddr6 is good but it's not really the important part
It's one of the better models, performance is roughly equal to a 2070 super
And the 12gb cant really be utilised unless production workload
Oh
Not on that gpu at least, 12gb is good in modern 4k
Yeah it's good
12GB of VRAM is basically pointless on the 3060
It could have been 6GB of VRAM and the card would have done fine.
Yeah you’re never gonna use all 12 lol
You could use all 12gb or g6 just not on a 3060
3060's 12 gigs of gddr6 is limited in bandwidth too
So it basically is left unused
like how 6600xt has 128 bits vram bottlenecking its potential
Smol bus
are prime z590 boards okay
yep ur good
Aye but I'd go ud ac
indeed
yee
650w plentyyy
not really tbh
if you oc the 11600k and 2070s itll be cutting it close
theres enough left in the budget
Aye 20 series doesn't have anywhere near the spikes of 30, Nvidia recommend 650w
hmmmm
I'd have done the same buddy. Having a bigger PSU is never a bad thing.
I wouldn't use an SN550 though.
why not
Completely agree just saying that 650w is plenty for a 2070
sn550 is amazing
There's cheaper drives with similar performance as far as I remember.
mp33...?
Nope not really
Cameron btw i wouldnt get a 11600k
11500 + b560
Loooks good
Helix-L isn't good? XPG SX6000 isn't good?
or 10850k + z590
Sn550 whooops their ass in rand
Oh.
11500 price still wack
ill leave it up to the person buying for cpu
sn550 slaps an 980 around
Carry on.
lol
11600k not worth the extra tho
last gen i7 or i9 works too
There's only like 25 micro centers in murica and like half of the time 2 in 1 state sooo you gotta ask if they live near one
Atm 11600k is cheaper than 11500
yeh but 100% worth driving to one if close nuff
Not for some people
online or in store too
its a 20 hour drive to the nearest micro center
It's a 1TB NVME drive with a SM2262EN Controller.
11600k is in stock i think
hmmm
CrystalDiskInfo doesn't like to give names for disks...
Most ppl leave big far way
kingston kc2000?
Tis
Nice
Nice nice
think thats about msrp
That's a sale price actually.
Sn550 better rand, worse seq
MSRP is 131.99
O
Gone ryzen
Msrp not worth, the sale price woeth in some cases tho
So, if I were to buy another SSD that I'd use in say, another gaming rig? Should I just get a SN550?
Yeah more options good because we have like 0 details for the guy buying it
If you want, lol
I mean, the SN550 is cheaper.
But, IDK if Sequential or Random is better for Gaming
think random
easiest yes of my life
Rand
seq is for one big file
random is better for almost everything
seq is better for storing large files and editing em off of
Thanks so heckin much
Gotcha. Once I get a new Motherboard and CPU, and GPU, I'll probably get a SN550 for my new setup, and then my Fiancee can have the Pilot-E and my 3600
I'd honestly build the Intel build.
idk what your friend got his 2070s for
Intel is kinda killing it this generation only because they can actually keep things in stock.
I wish I could say "Buy AMD" but... I can't because their shite ain't in stock.
11500 out of stock
5600x is in stock
5600x stock is better than 11400 stock nowadays
I'll check idk what he's payin
He just got back to me on his budget lol
His budget is 2400cad
10850K isn't in the running?
5800x beats it
And 5800x is better
They're very close multi-core wise, and 5800x just slaps single core
Cad.... Now he need new list
Fuuuu
I know I'm sorry
The Fuma 2 doesn't exist in CAD

Uhhh... substitute air cooler for a Fuma 2?
fuma 2 not great for a 5800x anyway
Really?
In the us it's around the price of a 5600x tho
5800x runs really hot
I thought the Fuma 2 slayed every hot running CPU
go for a 3600 aio
A lot of coolers dont
I'm tryna get as much info from him so I can help but he's at work so it's slow
the 5800x is a fryer
Sorry for wasting yalls time
It ain't no waste of my time.
5800x is just hotspot, can justify better cooler
I'm off today.
@ancient crown have the bought/boutta buy gpu? And how much
But fuma 2 is good in general
It's fine lol
Sippy got unlucky
I'm still convinced bleach just got bad bin
nothing new
I'm also a bit out of touch with motherboards now. Would a B550 Tomahawk be enough to handle a 5800X?
His buddy has a 2070s he can sell him but hasn't given me a price. I assume it's cheaper than normal cause friends but idk for sure
sippy always gets bad bins
It's 174 CAD and I knew it was a decent board.
So
the day sippy gets a good bin is the day i have officially seen it all
I'll guestimate 600 cad?
It's like demonmit getting a 1080ti for 75$ and it just doesn't oc at all
wuuuuut
how
hecking
Year ago
I want
Demonmit god of deals
indood
I'm kinda guessing on some of these parts because I haven't built a PC in like, a bit.
Lf2 price looks off
High or Low?
Too high
Drive seems wacky, would do Toshiba x300
Ye last time a few months ago I looked at cad lf2 price it was like 150cad
Really? I've had no issues with my 3TB Barracuda
I mean, if anything, it's 7200rpm
Oh, fair.
But unlabeled barracuda kinda suspicious to be anyways
Is the RMx 850 a decent enough unit?
I know it's probably overkill on wattage
But, better to be safe than sorry.
I mean, budget is 2400 CAD
A-gf is on the same platform as RMx, just less modified
We are already under-budget.
Save a bit more, save up for better GPU yaknow
I could probably chuck 32GB of RAM into it and STILL be under-budget.
He's buying a used 2070S
https://ca.pcpartpicker.com/list/HRcfXb Final build
Also, why Aorus Elite Floppa?
better mobo and has wifi
Wait wha? They stopped making Wi-Fi enabled Tomahawks?
they make both
with and without
Oh, I thought all of them had Wi-Fi
nope
TBH I prefer a card slot taken up for Wi-Fi over on-board.
easier to have inbuilt
Sometimes it can be a massive pain in the ass to replace a Wi-Fi chip if it decides to go bad on-board.
in that case you always have an option to add a card
That and I really like my TP-Link Archer AX card.
Did I over pay? Yes.
Did I also get a really nice looking Wi-Fi card?
also in the board is usually 10$ extra for a VERY nice wifi card built in
always nice to have
send him this
I'd send him mine also, just in case they don't explicitly need Wi-Fi
I just hope his bud isn't stiffing him on the card
And the PSU is effectively the same, but also cheaper.
Yeah I'll send em both
the board and the aio on my list are better
also the hdd
Uhhh, the umm... the AIO is the same... but with RGB...
10$ cheaper for rgb one than non rgb
Wtf is the world coming to...
Lol
The board is negligible in how much better it is.
ehhh not really tbh
Both aren't going to explode in a puff of smoke if the 5800X decides to go ultra-turbo mode.
@ancient crown bit late to the party but ehh https://ca.pcpartpicker.com/list/8HCJJf
rgb freezer 2 is 20$ cheaper
3200 🤮
Lolll
Ohh nice
I also have 3200, but that kit can probably easily hit 3600 or 3800
fixed
cas latency my dood
Wtf why no HDD Pato?
frequency isnt the do all and end all
And P500A?

P400A is more than adequate, and you gotta have SOMEWHERE to store your games and homework
Wait what
Why... Why no P400A on list?
Man finally gets back to me and all he says is "what's better amd or intel?"
Gosh dang it
Oh, there we go.

Why hdd
https://ca.pcpartpicker.com/list/kM994d Just tell him to buy this.
I just said why...
Gotta have somewhere to store your games and homework
P500a can top mount the 360 and bigger
Bigger =/= Better
1tb plenty imo
P500a better tho
1TB is absolutely microscopic.
Depends who you are
nahhh
If you play Modern Warfare, Fortnite, or Master Chief Collection (Or really any modern AAA title) you need more than just 1TB of storage.
This.
I agree 1tb isn't enough
And a 4TB SSD is... still not very cost effective.
So, 4TB of Toshiba X300 is good enough.
1TB should be standard now but I have a 2tb NVMe in mine. One day, I'll get a 4TB when they don't cost an arm and a leg
I probably should stock up on like, 4 of those.
2 for me, 2 for my Fiancee.
Just so we never have to worry about storage.
I don't make THAT much money.
Lmao
Hell, I couldn't afford a single X300 4TB right now.
Wait a second...
@fossil cedar Why TF did you put a mATX motherboard in an ATX case
You a MF'ing 🤡
Yeah, but it looks stoopid
https://ca.pcpartpicker.com/list/MTGX4d Here we go. Final form of the build.
Still 300 CAD under-budget.
My EVGA G2 650w has been holding strong since 2015
Jesus.
Oh
There's your problem
G3 units suck
G2 was peak EVGA PSU
Yeah, my next PSU probably will be an RMx unit.
F
good boi
Cuz it doesn't matter and great board with WiFi for cheap 😛
But mATX in ATX look stoopid
Doesn't mean you need to spend it tho
Nah
I was still 300 CAD under-budget WITH an ATX motherboard.
I look at your build 24/7 rommy
I don't look at mine 24/7, but I do look at it at least once a day or so to make sure fans aren't doing stupid stuff.
No need to go atx tho, okay I'll put in an atx option but really no need
I already finished the build...
Is 32 gb ram even necessary tho lol
Yes, but no?
@ancient crown do they need wifi and do they want and atx board because skiptrace seems to hate it
Like 16 is fine right
some games could already use above 16
Ye
Idk , he's slow to respond but I'll ask
https://ca.pcpartpicker.com/list/MTGX4d Here's the peak, finished build.
If they play flight sym or any other games yes, and ye we're at a point where 8c you get 32gb
Ignore Pato's insistence on using the P500A for some ungodly reason.
When the P400A is A. Cheaper and B. Has more than adequate airflow.
Ah fair enough on the ram
I'd honestly be suggesting the Fractal Design Torrent, but... It's also like 189.00 USD
But, it's such a good case...
@ancient crown https://ca.pcpartpicker.com/list/GCNGp2 if they don't want matx board and don't need wifi

Probs more frequency then
P500a is better and lets you top mount the 360 but p400a works fine to
Yeah you just front mount instead
Top mounting the 360 isn't really 100% a need though. Sure, it's nice, but front is just fine.
Then you just move any front fans it came with to other spots and bam, full case
Ye ik
Never said front mounting was bad just nicer option as the budget was there
You can barely consider an AIO water cooling. If you get reputable brand the risk is near 0 with measurable performance gains.
Besides, the fluid is typically alcohol based with low electrical conductivity
I want that Leak Detector thing you attach to a res to make sure you don't have leaks.
LTT did a review of it.
Like the one Linus showed? That actually stops the leaks?
That thing was really cool, finally something that lived up to the hype
hello hello
I want an aoi but don't really need it for my cpu lol
aio
5600x stock is fine i think
Aoli?
And hi oomfie
Don't.
Thank you all again for helping me help someone
Just build the PC yourself.
Acutally.
Just don't buy a PC right now.
Wait for like, 2022 or 2023
I mean pre builts are fine lol
It's hard to find a good gpu so prebuilt is a good option for those desperate enough to be willing to sacrifice performance for price ratio
i mean im pretty new with all that i was just wondering if new egg was alright to order from
E.x Crappy motherboards, Crappy PSUs, etc.
Abs is fine
Abs prebuilts are the way to go then
Yeah wegg is good, ABS is a house brand with decent enough stuff
I mean, we wouldn't be an official verified discord if Newegg wasn't a reputable website...
Same

What's your price oomfie
yeah i just wanted to confirm cause like i said im really new to all this
the one i was looking at was 1500
Got a link?
it’s sold by nutrend
i was mostly worried cause i heard customer service and shipping was kinda bleh on newegg
my neighborhoods kinda trash so i was worried about getting the package stolen
Just be home then
https://www.newegg.com/skytech-st-chronosm-0237-ne-chronos-mini/p/N82E16883289131 This would be a much better prebuilt.
That's up to your shipping company
The case actually has airflow, and the PSU doesn't look like it's a hand grenade.
I'd replace the Cooler in it though.
The Stock AMD cooler isn't the best cooler out there.
o tyty
It would be fine for that tho. Unless you're gonna over clock
I didn't find any "ABS" builds
Yeah idk what skytetch its
And, that setup looks fine.
ABS builds pcs and sells them on newegg
Same as skytech
It's a 3600 on a B450M from Gigabyte, with a Zotac 2060, and a Toughpower GX1 PSU
And it has a 1TB SSD and 16GB of RAM.
Only 3000Mhz on the RAM
But, that's fine enough for a start.
Looks like the RAM is from XPG
Do you guys know if Cablemod sends extra cables that arent sold in their shop?
I just got my gpu and I am missing 1x 8 pin 
Is that a mesh front?
I can't tell.
Oh
It definitely isn't.
I'd avoid that like COVID-19
Nope, not at all. Was just showing an ABS PC is all
I believe so? Just contact them
I have contacted them through their website and I am praying for a cable
me wan ur abs not neweggs
Better
I can help you get some though 😉
I have abs tbf
mostly because I dont have any fat on my stomach not that I gym
Aye, that's awesome
hey guys who can help me buy a prebuilt gaming pc around 1500 or so should i go with nzxt or build redux or newegg
Abs nice
so no nzxt or build redux or any other ones
Abs best option
the second one https://www.newegg.com/abs-ali536/p/N82E16883360141?itemPosition=1-12&exactIndex=3 should i get a better cooler for it
stock cpu hz seems too low or
nah that has a gammaxx 400, decent cooler
so its good for max overclock
well you cant overclock that cpu
but overclocking cpus etc arent really worth it nowadays as much as it used to be
https://pcpartpicker.com/list/ZXWX4d this is my build rn except for the cooler i just have an amd wraith on it still missing ram tho so i haven’t been able to use it
When did you build it?
like 1 week ago
Best color on cable mod extention cables in my case?
How much did you pay for that 1700xX?
I would say black
Something color neutral would look the best imo
Unless you have a specific RGB color you will be using
why?
Hmm @worn wave i normally use rainbow color on all 9 QL fans
Or u think lian li rgb sleve?
@worn wave ???
I got white cable mod atm. @worn wave
Can buy another color too no problem
I think i try white. I send pic after
Sata input 5 and 6 is the bottom correct
?
locked cpu
Yep
dang
Those RGB Cables are dumb. Don't buy them.
Personally I think White Cables are the best for all builds.
Because the White will always either go with, or contrast whatever you are doing.
So, if you have a "blackout" build, but you want a little contrast, just buy white cables!
RGB Build? White Cables for more reflective surface!
The lian li strimmers cable extensions look amazing
And you lost enough brain cells to think they aren't dumb anymore.
Who keeps emoting with
to your message for half a second sips lmao
From pictures the strimmers look awful
Sips build has strimmers
I dont like RGB that much tho
It's just white for sips build, looks good
no budget
Lol
That's a great emoji
it really is
Weeb empire


anyways, if rgb cables are dumb, then so are braided cables as a whole
they both follow the same concept
the only difference is how much money you're willing to spend on pure 0 performance aesthetics
Braided cables are more flexible.
there's nothing wrong with
🙂
Checkmate.
Braided is more flexible than the ketchup and mustard cables or rubberized cables most PSUs come with.
extensions make cable management harder, and if you're buying non-extension braided cables, you're spending more than the rgb cables
No?
I bought Cablemod Modular PSU cables to replace all of my PSU cables, and it was like, 80 bucks for a kit.
lol that's more than i paid for my rgb cables
A singler Strimer is 53.99 for the 24 pin
i didn't buy them from retail 🙂
Then don't say that's a lot more than you paid.
Because Retail is where most people are buying things.
No? It was about how stupid the RGB cable is, vs a standard Cablemod set.
A Cablemod set at least has the utility of being easier to manage than normal cables.
cablemod is dumb when $20 extensions that achieve the same look exist 🙂
cable management is easy you really don't need cablemod to do that
And don't fix the underlying cable management issue.
You don't need it, but it sure does look nicer when you have cables that don't kink or do any stupid crap.
no problems fitting non modular power supplies with extensions into small matx cases
just get better at cable management and save the $80 lol
I tried that, and my stock EVGA Cables said "Screw you i'm gonna kink and look terrible and not do what you tell me to do"
sounds like user error
No, it's just how most rubberized cables do.
I always buy RM PSUs and buy cablemod ModMesh cables for them
This is also my first build i've ever done replacement cables.
I have never used the incldued cables
I use them because rear cable management looks much more clean also
Ye
mmm ewaste
Then maybe... PSU companies should make... Cable-less PSUs. They don't come with any cables.
You supply your own set.
the best part is that what you're saying boils down to "my opinion of what looks good is more important than yours"
Even better wireless PSUs
you're spending $80 on what you think looks good, i'm spending $70 on what i think looks good, but somehow i am the dumb one

Just like phone companies are like "Hey, screw you user you have to buy a power brick, but here's a charging cable"
Because your cable reduces functionality.
The Strimer cables are hard AF to bend because they are stupid thick.
i think my pc is working fine thank you
luckily i know how to manage cables so it's not a problem
The Strimmer cables are for sure cool but I would never use them personally
From images of them, the RGB does not look that great but I have never seen them in person
I know how to manage cables too, it doesn't mean that a Strimer cable isn't harder to manage and is quite literally a waste of money, vs a cablemod set that has real practical value.
"hard to bend" I'm literally making a 180 with them
Strimer is for people who don’t have to worry about budgets as much
💀
that's pretty much what i'm saying
That’s pretty true
Just stick RGB strips to your rubberized cables.
but apparently all opinions except his are dumb lol
How it looks has an intangible value only you can set
That would look even worse than Strimmer cables
Spiders nest
I mean, objectively cable management does have a point. A. Airflow and B. Making sure you can maintain the PC
perfection
Mustard and ketchup spaghetti
That's why dell used to put the cover over the cpu cooler with an exhaust duct
ah yes
dell and putting a laptop blower cooler on a 9900K

when the workaround to thermal shutdown in dell forums was to turn off turbo boost on your $3000 machine
lmfao
mmm, 3.6ghz goodness
you pretty much had to anyways, if you didn't hit thermal shutdown you'd trip the 460W psu they paired with a 9900K and 2080Ti

dell moment
Dell is a bruh moment
this cable management is painful 
then again, maybe the total system power wouldn't be high enough, considering they gave you a single 92mm exhaust fan and nothing else


i just hope that it's satire and not actually someone's build lmao
goodness please let that be satire
but knowing the internet... it probably is someone's build
even my first build looks better than that, pls no
the amount of dust those wires must catch 
someone in this server posted a build that makes that one look good, but i wasn't able to find it
maybe they deleted it
the entire case was just full of who knows what
well a lot of people have done that, but im assuming you mean a build that wasn't the highest quality
oh boy
oh
i think it was part of the messages that theo accidentally mass purged lmao
no wonder i can't find it
lmao nice
i love seeing builds where they have a ton of rgb and then you can barely even see it because their cable management is so bad it blocks everything from view
yeah yikes
i just put my first pc together yesterday and i have no ties for my cables (yet) but i managed to make it look nice 
i once tried out a new case for a flip
it did but i bought velcro ties
it was like a $70 case with tempered glass and rgb fans right
so its easier to take apart
the case came with zero zip ties lmao
yikes
Velcro ties are epic
agreed
i've bought $20 cases with no routing holes and no glass panel that still included 3 zip ties
bruhh
pov: you just got hired as a sysadmin
Lol

This is the cable management on one of my systems and honestly I could still do better
First order of business: spend 2 days tracing and labeling wires, then take some overtime to fix that at night when no one is working.
is msi 1050ti any good?
depends on price
bad ending: servers are mission critical 24/7 operation. you nudged the wrong cable and cost your company $2,500,000 due to downtime.

f i r e d
Good sysadmins know how to avoid down time with failover connections and offsite backup servers
I never have more than a few minutes down time, unless someone else messed with stuff they shouldn't
$300 was the cheapest i could find
yes... but as the eldritch spaghetti monster was in the process of absorbing you, you tripped over an important cable with no redundancies
heck no
what country do you live in?
If you don't have any kind of redundancy you deserve to trip 
US
first day. prior sysadmin was the guy from the verge
well im trying to build a computer for my friend who has no idea what storage is
why does this change anything
you buying it not them
and i dont want him buying something used and it breaking on him
they are buying it
if you don't want to buy a used gpu then just get a prebuilt
Used stuff doesn't break too often, unless it's got moving parts or had too much voltage applied.
https://pcpartpicker.com/list/L8GfXb
is there anything wrong with this build?
If one of my hard drives has failed would it still show up in device manager as unknown device?
It makes some weird kind of beeping noises when I try to boot it but doesnt show up in bios
Does show in device mngr tho
I opened it up and the arm looks to be parked and theres no scratches or anything on the platter so Im not sure whats going on
Well. Opening it uhh, basically made it dead
??? Thats not true at all
You dont just open a drive.
Opening an HDD kills it pretty quick
Its an old 3.5 not a sata
So
And?
If it wasn't bad before it most likely is bad now
I watched three different videos that showed people do the same thing to reset a stuck arm
And they boot right back up afterwards
Probably in a CLEANROOM
You should not be watching and listening to those videos
A hard drive should only be opened in a cleanroom by people who are trained and certified
Even if you don't think dust got on the platters, i'm sure it did
Then no harm done, but if it wasn't bad before it is now
I was just asking for any other ideas...
Can't do anything else now
It's ded
Even if it boots up and seems to work, it's not safe to continue using
Whys that
You will come upon errors in the future, your data would not be safe
I mean obviously










