#building-and-recc-chat
1 messages · Page 494 of 1
I mean, what do you think a radiator is used for 🙂
but yeah, if you don't have a water loop in your system, you don't need a radiator 😄
Ohh yea I see what you mean you taking about the clear tube water cooling
Ok thanks you this is why I love this discord it’s so fun and helpful lol 😝
What case do you have? and how many fans already installed?
Isn't installing extra fans on top a pretty common thing?
@sudden turret well I have a nzxt but I’m getting a Phanteks enthoo evolv x and I see I have some extra room for 3 fans up top so i said why not
oh nice, make them exhaust the air out and you'l be good.
That’s what I thought it would be good for haha thanks you!!
I ordered 1 Corsair ql 120
For the back fan now im gonna order 3 more
I wish I had room in the budget to buy some extra fans for mine. Guess that goes on the list as an upgrade down the line
Lol I had my pc for a month and I’m already making some upgrades😂
Guys!
Verify that this is compatible
I will make the case out of PVC
Yes, PVC, the stuff that pipes are made of
Hello?
Is anyone here?
Your probably going to want to find a ssd if you want bearable usability
Also psu seems sketchy
If I have 2 Corsair LL120 mounted on my aio but I want the ql for my back fan and 3 exhaust fans
Would it be more clean if I get them all the same model?
It probably wouldn't really matter, I have 2 Corsair ml fans in front and 2 nzxt aer fans in back (my case came with the nzxt ones) and you really cant tell a difference
the ql and ll fans will both work with icue so you can sync the RGB which is nice. they also use the same led's so the colors will match exactly unlike some other fans where the pinks might be a little more purple on one set or other colors just slightly off. QL's would work really well in the front of a case as intakes if you have a mesh or glass front panel since you could see the rgb on both sides. the LL's could then be used as exhaust so that the rgb faces towards the inside of the case.
I use Logitech G933 and my surround sound doesn’t work
It only comes from center channel
@warm nova that does make sense but my front fans will be covered with the LL’s since I’m swapping cases and I already have that installed on the aio so might as well use the Ql’s for the exhaust and back fan
Can the b450 tomahawk max sapport a ryzen 3 3200g without a bios update?
i don't even recommend that board tbh
Yeah same
if you already have it, make it work, but if you're choosing, get something else
^
Its not an inherently bad board, but theres much better
It has good vrms, but nothing else is amazing just eh
Nobody answered his question tho.
Yes it does support 3000 series out of box
Ok what board do you guys recomend
Can someone help me find a good 3 or 6 pack rgb fans? With motherboard control cause I don’t like using a remove control lol
i don’t think so
Ok
I'd love an answer to that fan question. I can't buy extra fans currently, but I'd appreciate recommendations for when I can
@gilded fog you do not need to bios update for the asus board
should I go full atx for a budget build?
Those two have no correlation
mATX boards tend to be the most budget friendly but there are exceptions
https://pcpartpicker.com/list/NWZVCL Planning to do a build like this (I already have PSU and Storage). I kind of want to think about lowering costs a little while maintaining the the RGB aesthetic I want. Should I just go with the 2060 or is the 2060 super really going to be worth it for the extra cash. I plan on running all kinds of triple A titles at 1080p High settings. Don't really care about upping my resolution atm.
I'm currently working with https://pcpartpicker.com/list/JWPtk6 and do alright on medium/sometimes low settings so I know i'll be making a large leap either way.
@proud galleon What's going to be the budget?
And are you planning on sticking with that same AIO?
@stoic island Not really deadset on a budget, was looking to shave it down to maybe $1000 for the time being. I was planning to move to an NZXT 280mm AIO for aesthetic reasons (included fans with case are 140), and NZXT has a very nice AIO, but I am not against compromising on another 280mm AIO that comes with decent lighting.
That's the only reason I thought about taking the GPU down because I'm not as much as a graphics freak as I am an aesthetics freak.
Really thinking of experimenting with RTX but i'm not 100% against even dropping to a 1660 Ti.
Well, my thought is you would probably need a RTX2060 or better to make sure you have good enough performance to be able to play triple A games on high settings for the years to come
Yeah I think my best bet is dropping to a 2060 but I'm almost thinking the super would be worth the extra investment. I'll see what time brings, this pandemic is giving me quite a few more hours at work who knows.
I assume you'll have some time to wait for parts?
Because the motherboard I would like to suggest is out of stock on Newegg, and the third party seller is asking for quite a bit above the usual price... https://www.newegg.com/asus-tuf-b450-pro-gaming/p/N82E16813119205/
Though amazon has a few in stock, amazon is going to take 10+ days to get it delivered due to the pandemic and all.
Yeah I'm not too urgent about delivery. Definitely understanding with the pandemic. I also only have up to $600 saved atm for the build, so just about 2-3 weeks away from being where I need to be.
Alright I had to look at some benchmarks and stuff, but are you willing to switch to this AIO for a bit better performance?
https://www.newegg.com/corsair-icue-h115i-rgb-pro-xt-liquid-cooling-system/p/N82E16835181191
That choice was for aesthetics, if you care a bit less about aesthetics, this is at similar performance at a fair bit cheaper.
https://www.amazon.com/EVGA-Liquid-Cooler-Cooling-400-HY-CL28-V1/dp/B01N16CAKN?tag=gamersnexus01-20
@proud galleon What kind of aethestics are you going for with the build?
Damn you people put here getting 1660ti’s while RX 5600xt’s perform better and are cheaper where I live
Kinda shooting for something very similar to this.
Just slightly different color schemes.
I love it it has Kirby in it
Huh
sooo
Fair bit of ring rgb
Sadly I think only NZXT makes those kinda cases
and most NZXT cases dont have good airflow
thats such an expensive case xd
Looks > airflow
but aesthetics
Can't even recommend p400a bc prices are so wack
Maybe a meshify c plus some rgb fans
https://www.newegg.com/fractal-design-meshify-c-white-tg-atx-mid-tower/p/N82E16811352087
I kinda hate NZXT for not making good mesh cases for airflow
My temps aren't that bad so if @proud galleon wanta that case it should be fine
The rosewill prism looks good, but idk if it is
I have an elite
Yea
Waaaay overpriced imo
You know it's bad when the GN review on it is titled this
^
And look how badly the front panel is choking the airflow
Gn case reviews are the best for cases lol nothing compares
shaves off like 19c by just taking the panel off
Idc what anyone says it looks good and my temps are fine
@humble rivet what are your specs
I just want to find a better priced alternative with better airflow...
If you like the looks of a case - you can always reconfigure the fan setup.
Just decide if your aethetic preference is worth the cost/ effort.
Forks, any ideas other than Meshify C?
also, remember that 63C load is no where near throttling temps
A bit better than larrys
Ick
I'm nitpicky about temps
I'm not the best person to ask about ATX cases lol.
Alright
I just know the meshify C is pretty well reviewed, the O11 is the RGB disco ball, and that I'm too snobby to put my own hardware in a regular upright case 😆
if you ARE OCing, then it really does matter tho lol
I like things to run cooler, with better OC headroom, and all dat
Not really, having lower temps usually means dtuff lasts longer
Thats the big problem
thats where its gonna have to go imo :p
his words :
He's not wrong in that the kraken x62 is one of the best on the market.
Forks, I was thinking h115i since thats cheaper?
x63 is a thing now
Don't think it comes with rgb fans though. Gotta go with an H115 i platinum for that.
I really wish people would just not want so much rgb..... lists would be so much easier to make
And with GN reviews, x63 thermals are really close to x62, and h115i beats x62 thermals.
bloody rgb
Rgb ftw
The coolermaster ml240 and 280 are pretty cheap in the aio world
ive heard good things on those
Ya, those and the EVGA CLC's are some of the best performance/$ if you want something no frills/rgb.
i dont know if they have amazing performance tho
I was going to present this list and leave them some money ish for rgb fans
https://pcpartpicker.com/list/L2BXFG
Buildzoid himself uses a 240? mm EVGA CLC for benching on stream.
I'd like to get some shiny rgb fans eventually for my new build, even if I can't afford them initially
Actually he was just pulling capacitors off the MB with pliers to see if it'd die , but still.
Supa expensive
I have these, they're not bad https://www.newegg.com/p/1YF-012B-00080
240clc so much cheaper than 280 :p
https://pcpartpicker.com/list/3LfXFG I would get this but noooo we need rgb
32$ per?
Hope not
also, wtf is this forks... u tryna scam? (jk)
Thats corsair level peices
They're $25 / 3 on ||Amazon||
Phew
Uphere has pretty decent reliable fans
Spoiler haha I made you click
||poggers||
5 pack for 30
Gaaah why do I do this
I was just checking discord before sleep
Ive fallen into a pit of not sleeping now
Sounds like you fit in well with #building-and-recc-chat hahaha
Actually, how would this be, since they'll need 6 fans total if they want rgb everything
https://www.amazon.com/upHere-Intelligent-Addressable-Motherboard-Adjustable/dp/B07HK7YRCD/
Idk 10 more dollars for 1 more fan
I admit, I've stared at these a few times and keep talking myself in and out of buying them:
https://www.amazon.com/EZDIY-FAB-Moonlight-Motherboard-Computer-Multiple/dp/B07XDYKC91/ref=pd_rhf_dp_p_img_2?_encoding=UTF8&psc=1&refRID=8EFJX3YKBFPAHAYWCB47
@proud galleon Are you willing to go with this build? Aesthetically it would be different, but you can replace all the fans with RGB fans, and stay at the 1000 USD mark.
https://pcpartpicker.com/list/n4wLjp
Yeah thank you, i'll consider everyone's advice and maybe look into parts a little more.
Alright.
Hei, they want aesthetics over performance
3d print fake AIO and put overtop air cooler for like $20 or less using 3d printing services
Hey guys, could you help me decide on if this build is good for future upgrades? I found it on Amazon while researching for parts.
It made it seem overall cheaper to buy a prebuilt then upgrade anything I may see fit, such as a wifi card.
SkyTech Blaze - Gaming Computer PC Desktop – Ryzen 5 1600 6-Core 3.2 GHz, NVIDIA GeForce GTX 1050 Ti 4GB, 1TB HDD, 16GB DDR4, AC WiFi, Windows 10 Home 64-bit (16GB Version) (Renewed) https://www.amazon.com/dp/B086Q6R7DQ/ref=cm_sw_r_other_apa_i_ISOIEbZ6VA27B
Well, prebuilt upgrading can be iffy sometimes, especially with proprietary components. But I'll try to take a look.
I appreciate it Cheif!
Keep in mind its refurbished. Im sure you know that l just want to point it out
Mhm I am just curious to have more experienced eyes on this.
Oh boy that those component choices.....
I don't like the looks of that for upgradability...
First, that isn't a great PSU, but it can work okay
Only 1 M.2 slot, which is okaay
then only 2 ram dimm slots, which is pretty bad for upgradability
The ram wouldn't really be the first thing he'd upgrade tho
then, the mobo chipset is A320m, which makes it pretty bad for supporting newer higher end CPUs
i mean you could still slap 64gb of ram in there
Lol your right
It would force you to buy a new set of ram whenever you want to upgrade
cant keep previous ram
that ram is already pretty bad too
2400mhz
prob cl18, doesn't say.
oml this description xD
has to specify (not stock heatsink)
Lol
Idek if thats even any better than the stock heatsink
looks like a wraith stealth with red led lol
even more suspicious thing is that Coolermaster also makes the stock heatsinks
Probably not better
they might've just slapped on leds xD
I saw once that when they do that the heatsink doesn't completely cover the chip
It was like in a bitwit pre-built analyst video
Would it be implied that Cooler master is not reliable?
No
Stock heatsink is good actually
Just this specific implementation is not the best
I was just poking at the description lol
Oh I understand.
If I were to change anything what'd be my first thing? Just to summarize the overview that you guys gave.
I had to go quickly take a peak at what kinda custom build you could build at that price, and it seems you can probably do better with building it yourself
For example, this is still not a great list, but I quickly made it for 555$ total
https://pcpartpicker.com/list/hYk2TC
That prebuilt, I have many critiques for, and that being not a major retailer in terms of prebuits, I cant tell you how good their customer support and QA is, so I definally wouldn't recommend.
I gotta go for a bit
That looks great with an ATX form factor, the build you sent me.
And for performance, heres the rx580 in my build vs the 1050ti in that build
https://gpu.userbenchmark.com/Compare/Nvidia-GTX-1050-Ti-vs-AMD-RX-580/3649vs3923
also, the CPU in my build, I didn't specify, but it's meant to be 1600af, other ppl here can explain the difference, I really gotta go for a bit
Oh I was actually curious about the RX580 vs the 1050
Oh okay
Wow, this blows that prebuilt away!
Definitely a great amount of research done.
I am most likely going to purchase that set of parts.
If I have any other concerns I will come back here.
Ya mr1111s list destroys that prebuilt
However I still would recommend a ssd
It would make everything so much better im usability
@buoyant flame that's why I said it's not a good list, I'm out doing smth rn, can you edit the list to have like a silicon power a80 240g plus a 1tb HDD or smth?
Alright hei can you do your thing?
I put the a80 in there because I dont really have time to find a good ssd rn
Shoot didn't mean to send that
🤔 you linked the gpu again
It won't let me delete it 😂
L
MODS HELP
That means that I lost the list too lol
@celest horizon can you delete that gpu link for me real quick
It won't let me
Thx
welp, SATA prices have died completely now, no more amazing options
-SATA 240: $41
-NVMe 240: $48
-SATA 480: $60
-NVMe 512: $68.99
Well I mean it's more out of proportion now

he dont need that much big hardware lol
Hello
What the budget
my son is wanting a pc that can run red dead, gta, fortnite, csgo, etc
Like I see 9900k, then I see 2060, that's pretty unbalanced imo for gaming
Budget 1.5k probably
Red dead and gta are gonna require some good hardware
will 2070 run those games?
2070 super
will a *
You can easily get 3600+2070s at that price
4k 60 should be fine
Hell I think hei managed to fit in a 2080s in a list for 1500$ before
well it's ez
Anyways
i5 9400f + 2080s
At 1080p, definally.
1440p maybe 60
Nah, 3600+2080s
since it's intel, you don't have to spend much on ram
Ram for ryzen ain't much more
I have 4
4 what
1440p 144hz's monitors I can just give him one
would the 3600 be a bottleneck with the 2080s?
not really
at that point you should be running at 1440p
to which the GPU wont bottleneck the CPU
yeah he said he will be
but then again
it's not hard to fit 3600 + 2080s
lots of things should be changed from that
you will have to turn down some settings to hit the full 144hz on 1440p
why max settings
So much nicer
well even a 2060s gonna do that ez
my 1660 does 120 fps
high and max are like the same
1660 ti*
Yeah 🙂
uh that looks like a bad parts list
2tb hdd perferd, swap out ssd for a 500gb nvme or somthing
That list hurts
cooler needs to be changed
and yeah
like I said
AMP might be out I think now
you have 200 left
Better ram, ripjaw v at like 5$ more 3600mhs cl16
do whatever you want
3600 memory
Ah damn
jeezz
RMx maybe
ripjaw ugly af
it dont matter?
Unless whisper in stock?
anyways that list makes me barf
There's also no case, put in a meshify c, make it look nice.
I keep hearing about other eiscords I kinda want to join
But I won't
I'm loyal to wegg
sme
I'm also too lazy
Alright, thank you guys SO MUCH for the help I have to go pick up my other son from daycare
I will be back soon!
Alright, see ya!
quick mock build I did
https://pcpartpicker.com/list/9nMjL2
no idea if this is good or not https://pcpartpicker.com/list/LN9VCL
am trying to learn stuff
Fun thing to learn about mobos, the tomahawk sucks
poor sound chip, less M2 slots, less RGB headers, lacks WiFi, worse network chip, etc when compared to boards in the same price bracket
So I'd advised against recommending unless very specific use case tbh
i have that card but the 2070S version, is the cooler any good? (the one in your list)
As for 750w PSU, I wouldn't go RM. If your PC takes 750w it'll be a dual GPU or HEDT computer. As such being like 3k+. The PSU cost should be proportional to the PC cost. So that you get those extra features such as really low voltage ripple, better load regulation, better transient response, multi railing, etc. I wouldn't recommend more then 650w for 99.99% of standard consumers
I usually keep the max PSU budget to 550w
as that can run a stock 3950x + stock 2080Ti
I didnt look at reviews of the card, but I havent heard of it being horrible. 99% chance that the EVGA you picked card is better tho
ok
As EVGA has been doing quite well in the cheap side of cards
thanks a lot, i just wanna know more about the stuff i like doing.
np, always try to help
Curious what anyone would think about this as far as a server build. I already have the MB, RAM, and PSU from a previous upgrade which is why I'm going with that CPU. Thanks for any help!
https://pcpartpicker.com/list/YHtCtp
PSU isnt that great. Missing OCP (over current protection) and UVP (under voltage protection). While it may be able to simulate OCP cuz it has OVP (over voltage protection) and OPP (over power protection) it cant in any way do UVP properly. So if something bad happens from a failing component, unexpected shutdowns from say blackouts (maybe not for this specific model, but an example), PSU just failing randomly, or something else then the PSU wont be able to protect your components from supplying too low of voltage which can easily damage them
Also for a server build I'd want the fans to last long without worrying much of them. The PSU fan is sleeve bearing which has usually the lowest lifespan for computer fan bearings
Also what kind of server? Afaik NASes dont really need that great of a CPU much of at all
Sorry the PSU is just a stand in because the one I have already I couldn't find on pcpartpicker. The one I have is 80+ gold so I'm not worried about that (but I appreciate you pointing it out).
And as far as what kind of server I don't really know much about setting them up so I don't know. I'm still doing research on that but basically I want it to be able to backup both my current PCs as well as being a place where I can store media files (I stream and do graphic design so I have a ton of videos and after effects files that take up a lot of space)
Just because it's 80+ gold doesnt mean it's good. Some 80+ bronze easily beat out some gold as there is quite a bit to PSUs (my little rant was on one small segment of them, protections) other then just efficiency.
If you stream then that CPU is I think good enough for encoding by itself. So meaning a single PC for playing games and one for streaming. Tho then again if your current hardware is already good enough (some high end CPU or 20 series Nvidia) then it's kinda a hassle to do for such minimal gains and you'd probably be best off with a cheaper CPU
I know, this is trash for saving costs
like I could of used more cost effective ram, didn't need that much wattage in the power supply
don't need that much ram
but I don't min
d
do you have a case already?
if budget doesnt matter, then why get 3200 and not like 3600
I mean, you can get a lot better tho. As for fans just get something like upHere or Edzi. idk availability in Australia tho so idk where to look.
https://au.pcpartpicker.com/list/CsVM6R
@cursive wharf I get what you mean as far as the PSU. The one I have I'm not worried about though cause it's a good brand and everything. But for CPU the i5 9400 CPU that I went with was mostly because I already have the motherboard and that was one of the cheapest CPUs I could get that fit the MB that still had onboard graphics. That's why I had that one. I guess if I could get a CPU and MB combo for cheaper than this CPU it would maybe be worth it but I'd like to repurpose the parts that I already have where possible
cant get a 8100/9100 or whatever the i3 is? Also, never judge a PSU by brand because there isnt a PSU brand out there that doesnt sell bad PSUs
Totally fair. I definitely get that. And it’s an LGA1151 socket so at least on pcpartpicker that was the lowest compatible
@cursive wharf Correct me if I'm wrong, but isn't doesn't one of the Seagate 3tb drives have an extremely high failure rate?
hey anyone mind helping me pick out parts for a custom loop? y'all know I'm gonna be running 3900x and asus rog strix 2080ti. the 2 possible cases afaik will be either the ibuypower snowblind element, or the corsair 780t
ekwb
I thought about doing ek's fluid gaming because the aluminum stuff seems a lot cheaper but it looks like there's pretty much discontinuing the kits
problem is their kits that include the gpu block are only the ones for the 10 series or the amd offerings I think
huh
EKWaterBlocks Shop offers you complete assortiment for water-cooling of your PC. Only EK and EK confirmed quality products.
and the only other complete kit I could find is for the vega gpu
I guess you can use this
https://www.ekwb.com/configurator/
yah I was playing with that and it gave me a like $700 configuration
and I can only assume that's before taxes
yah the aluminum wasn't going to cost me more than $400 I think
looked like aluminum was only 10 series :(
they got a gpu block for the rtx series but it's not in a kit
I could technically just do something like get this
and then just buy the gpu block
but then I'd have a gpu block for a vega gpu extra 😂
yea......
which would still be cheaper then that more than likely lol
bc they don't have the option to buy tubing on this portion of their website
you could also try to go corsair
https://www.corsair.com/us/en/Categories/Products/Custom-Cooling/c/Cor_Products_Custom_Cooling
CORSAIR Hydro X Series Custom Cooling features every part you’ll need for a custom liquid cooled PC. Choose from a full range of water blocks, radiators, pump/reservoir, fittings and tubing to build your own custom water cooled PC.
as I've said before, I'm not a custom water guy
can anyone configure a gaming/recording/gaming pc for me
I live in canada lol
and budget is 3500 CAD
@woeful agate Need a monitor or no
and do you need wifi
@woeful agate heres a pretty nice build including a monitor
https://ca.pcpartpicker.com/list/jYjt4n
Without monitor, you can splurge money on some more things and have this for 3500 cad
https://ca.pcpartpicker.com/list/WKjt4n
thanks @stoic island
yw.
Nice looking build 
These are the fans I'd like to have, eventually:
https://www.amazon.com/EZDIY-FAB-Moonlight-Motherboard-Computer-Multiple/dp/B07XDYKC91/ref=pd_rhf_dp_p_img_2?_encoding=UTF8&psc=1&refRID=8EFJX3YKBFPAHAYWCB47
uphere is cheaper
Possibly. But I just like the look of those and I'm not seeing a wash of bad reviews. (Which I assume would be there if they were complete trash)
@raw matrix Fluid Gaming has issues with the block being fully tightened. Not to mention being just as pricy as some other copper kits.
https://www.aliexpress.com/item/32899782878.html?spm=a2g0o.productlist.0.0.5cf562285UYWPR
Smarter Shopping, Better Living! Aliexpress.com
Doesn't aliexpress have expensive shipping tho?
It's eh. But also the kit is simply cheaper then others
shipping puts it close to same price
True
has anyone built with the H1 yet??
Does anyone have any reviews of the In Win 301 m-atx case?
I wish
Hi. I'm attempting to build a small temporary wood case for a laptop (mobo only) which I am using as a server.
So far it's gone fine, but I can't seem to find any screws that go into the motherboard's holes.
It seems normal desktop motherboard screws are slightly too large.
Any ideas?
To hold a motherboard in??
I took it out of an old laptop years ago. I don't have the screws that it was using anymore.
We ended up attaching the mobo using some bizarre L-shaped wood screws.
Top-right of frame.
Could I get some one to help me plan out a $1000 computer build that is vr ready and had room for later upgrades?
Oof
{obvious sarcasm}}
but why tomahawk tho?
Is there a better option for the same price range?
sure
Slightly more expensive...but still below $1100
I bet someone could make a better one lol
What is the advantage of an m.2 over a hard drive or ssd? Other than speed?
Much faster
not limited by sata bandwidth
and its the smallest storage form factor
I'm so tired. Didn't read your whole comment
I'll say size
Latency is less I think compared to the other 2
Haha I probably wouldn't have noticed. Haven't been around a new PC in a while
I don't remember the Meshify C being $92 when I bought it.
prices always change
Yep
Save da money
https://pcpartpicker.com/list/FyPt4n
i dont remember it being 50
Oof
I think I bought it for around $50 from newegg.
here goes my 30 mins of effort
I def would not have been able to pay more than that when I bought it.
Also I've seen some people put in the 1600 AF in the CPU section with the picture and all. how tho?
Makes it easier then having to find the amazon link all the time
ctrl-d to bookmark
My efforts were not in vain. Thanks @cursive wharf
thanks for thy links
ye, np
Thanks everyone
Of course
What can the 1600af be compared too? Ive heard of it quite a bit lately but don't know anything about it
Wow that's a great deal
1600af bad
...
alrighty then....
sure....
ok
As fu**
As frick
sixteen hundred as f?
Yup definitely
No
Enormous
@lyric thistle thanks for explaining
:>
Oh it's like the abc's
Lmfaoo yeah
is there any chance we can buy a 2070s with 400 dollars after the 3000 release 🤔
pricing of rtx card sucks rn
There's a chance
or Imma just wait for the 3000 and buy one of those
just want to get my pc ready for cbp2077
When they release you could probably find some cheapish 2080ti's
dem
the 1080ti is such a good buy
but i'm too scared of the warranty thing
so I daren't buy it
meh warranty shmarranty
well dun wanna spend 400 dollars for it to die after 5 months
I'd just go for a 2070 super. Not a huge performance difference.
yeah ik
it's just a bit overprice rn
so I'm looking forward to the 3000 release to make 2000 price more reasonable
When is it releasing?
Probably late 2020
Oh
There will always be faster, cooler, RGB'er tech - if you need/want something now, just go for it imo.
Luckily rgb is all that matters and you can add that on easily
i know that, but I'd still prefer to wait
I'm moving to a new place after June so don't wanna complicate things for now
because the moving out will require extra fund
"so I'm looking forward to the 3000 release to make 2000 price more reasonable" <- you are going to be waiting a LONG time for that
Jeopardy theme
10 series prices have barely dropped, none of which in a decent price range
apart from 1070 and sometimes 1070ti (but rarely)
Why couldn't there have been a 1670 😔
why you name so long
Why your name so long
idk
Why you name so long
no
or maybe u r right
the 1080ti is having a really good price rn
but considering "now" = close to 3000 release
meh...
🤦♂️
1680 Super when 😔
750ti refresh surely
but why
we need it
Hopefully with the new launch gts450 prices will go down so I can finally afford an uograde
and play what LoL with it?
750ti is still hell of a popular card here
yes lot of cafe shop still use that 750ti for eSports games.. still can play dota 2
so here is my pc that i'm going to build https://au.pcpartpicker.com/list/7jQCtp
I want to have heaps of fans
how much fans can I fit in there
Putting in the max amount of fans usually causes turbulence and increases temps and noise. Also, with that amount of money you can get a 2080Ti if you didn't waste so much on everything else. And yes I know it's AUD
^ mobo overpriced, ram overpriced, don't need a 850w psu , and imo liquid cooler is not necessary for this build
NOCTUA
Not ctua
Noc-tua
Natcuta
Not true bruh
Knock-too-augh
guys
can anyone config a ryzen 9 3900x pc for me
budget is 3800 cad
you sure?
definetly
Facts
the rest of the system is gonna only be like 1200 max
one
sure ig
plsssss
is this a joke, or do you actually have 3800 you can spend?
i need to know if you are ready to dump 3800 dollars
@woeful agate
My pc won’t output surround sound to my headphones. I tested my headphones on another pc and they worked just fine
I reset drivers
Reinstalled Logitech gaming software
I’m beginning to think that the sound chip in my mobo is damaged or something
Not your motherboard then
then they dont use the integrated audio chip
if the headphones work on another machine, then its something in software
At least I don’t need a new mobo
Is the fact that windows won’t let me turn on spatial sound something to do with the problem?
ok then, brb
Big difference lol
Some laptops are good
i assume your just gaming? @woeful agate
Find me something with desktop 1070 performance that's quiet
Its just a 0 @stiff narwhal can't be that big of a difference
And I'll consider
no
I'm moving off to college in a few months. Won't have to move my PC then
i am the only fish
FishSauce
Fish fighting time
Well I didn't know that
SassyFish
😂😂
lmao
If I did then obviously don't
@viral ore gaming/editing/recording
Even sophomore year I refused to get a laptop
do you know theres such thing as sassyfish sauce
That's sus
Lmao
@humble rivet almost got a 1660ti laptop w/ i5 9300h but decided against it. So glad I did
Since then, I sold my PC at a profit and now I'm finishing building my 2060 super PC
do you have any aesthetic preferences? @woeful agate
That name tho
ikr lol
lol
no
dont care bout aestheticity
(dunno if dats a word)
Just care bout preformance
*performance
i assume you dont care about RGB, but if you wanted two colors, what would they be
black and what
at this price range, everything will have lighting
yeah sure have rgb
sure why not
💸
ATX
A lot if deep thought went into this build beforehand 
im workin, im workin
kk
10 mins
I only need 4 parts left, does this look good?
crap, your in canada @woeful agate
this makes things more difficult
because idk whats in stock and what isnt
are you ready to buy today?
i can just find direct links to parts instead of a pcpp list
and, this is one of the worst times to build a pc because more things are out of stock than usual, making it kinda annoying
how badly do you need this pc? it might be beneficial to wait, especially if your dropping close to 4k
also with 10 gen intel at reasonable prices launching soon, and nvidia 30xx also releasing soon
I Badly need
i have a very bad PC
just config it and when new stuff comes Ill change it
also, thats in USD, not CAD
and the parts may or may not be available in canada
but most of them should
Noticed that most of my parts list on Newegg right now comes to just over a 1000 USD. (That is no monitor, but it does include a nice keyboard I found).
crap @woeful agate , those parts are way more expensive in CAD, and i had no idea
but, i did figure out how to switch to canada pcpp
https://ca.pcpartpicker.com/list/hnqqV7 @woeful agate
new list for CAD
sorry
hey
Hey
Which mother board is better for upgrading, the msi b450 tomahawk max or the asus tuf b450 pro gaming
Pro gaming
@viral ore while it is possible to run that off a 550s PSU you generally shouldn't as 650w allows for OC and proportional speaking makes the PC barely anymore expensive. Also 3950x and only 16gb RAM?
550w is okay for stock, but literally only stock. No OC headroom, not really even a small one is available.
If he wanted to oc he would have said so
He didn't say if he wanted wifi or a specific form factor until you asked tho so...
considering that, he probably doesnt know what overclocking is
That is very probable 😂
i saw his budget, and said 2080ti, 3950x, and let the rest of the components fall into place
plus, the psu is white :poggers:
i doubt hes working with 4k footage, lets be honest
i gathered that what he means by editing is like adobe photoshop
if he needs more ram, its a $120 cad change
Or save $100 and still get 650w and 32gb RAM
https://ca.pcpartpicker.com/list/V4GXdm
ok sure, tell him yourself
I mean heis list looks better imo
it performs better, sure
but it doesnt look better
well, i dont even know about performance tbh
its cheaper for a similar thing
The only "perf" or "quality" difference would be GPU. Venteus has a pretty poor cooler. I'd suggest FE over it
The only difference in looks is really the mobo and aio because the case has a psu shroud
a friend of mine offer me a deal
i7 8700 + b360m mortar titanium for $260
should I take it? 🤔
1600AF ($85) + okay b450 ($96) is less then $200 new
See if he's open to selling just the cpu - if you're looking for that type of setup.
I would've advise picking up that board in 2020.
why tho?
i look up the board and it doesn't look too bad
just missing the wifi thingy if I'm willing to pay more for a 3600 + b450 gaming carbon
and an inferior sound chip
b450 gaming pro carbon ac is good for a b450 wifi board
pro carbon is expensive
Ya ^
yeah ik
but the thing is I'm torn between those 2 deal
and I'm confused
i7 8700 is said to perform better than 3600
now I can get it for a lower price but also a worse mobo
So if I were to want to make a comp that has the capacity of 64 GB of ram+, and can get CPU speeds of 4.5 Ghz, and has an amazing graphics card, what would i want to get?
Considering you want 64gb of RAM, I'd take it you're doing a workstation build? As such the hardware you want entirely depends on what workloads you do. Some workstation workloads still are better on Intel by a fair margin despite AMD having a considerate advantage in raw power, you might want a AMD or Nvidia GPU and may be able to get away with the standard gaming stuff from each contender, or you might need to get the professional stuff from one of them
Any good $1000 dollar prebuilt
b450 tomahawk
b450 tomahawk


Z390
i would rather a b450 tomahawk than use intel
Okay fanboy
b450 tomahawk?
tomahawk
b450 tomahawk
TOMAHAWK
sucks
b450 tomahawk
sucks
Thomahawk
axe
hey guys i have a weird situation right here
i bought the G.SKILL Trident Z RGB (For AMD) by mistake, somehow i didn't see the word (for AMD)
so i'm wondering if it will works with intel cpu i9 9900k or should i buy the normal G.SKILL Trident Z RGB
G skill trident doesn't care what cpu you put it with for cpu you'll be fine.
i am looking for an outdoor audio system with outdoor speakers (I have 6 wires run). Looking for a receiver to be able to broadcast TV, Audio, radio, etc. What do you recommend in a reasonable price point
it's really more of meaning it's optimized for AMD, but really that hasn't mattered since first gen Ryzen when they were pickier about the dies on the sticks, even then suboptimal pairings still worked. but really in most cases any DDR4 modules will work on any platform.
Well then 32, i wasn't going for workstation just overdoing it for gaming lol
ok, uhh, i think @cursive wharf had some suggestions for your build
ill start by asking exactly what type of editing and recording are you planning on doing with this machine?
@woeful agate
ok
ill be recording at 1080p
and I don't really know how intensive my editing will be so I can't really answer that @viral ore
is it video editing?
yes
i just wanted to double check the amount of ram you might need
do you know at what resolution?
maybe 1080p
do you know what software you plan on using?
can someone help me with my frames problems im willing to venmo you
we dont help for payment @unkempt ibex
oh
and its against the rules here
@woeful agate if your using shotcut, the build i sent is fine. if you wanna play it safe and get more ram, then just get this build that some one else here made: https://ca.pcpartpicker.com/list/V4GXdm
@unkempt ibex just ask, someone might help you
ok thanks
@unkempt ibex did you install drivers for your GPU?
Is this a new issue?
did you change anything before this happened?
No so i bought a prebuilt about a year ago and i thinky for my rig it should be performing better
I can get you the link to it if you would like
that doesnt answer any of my questions...
ok
So its kinda a new issue like i used to get better frames but i have a friend with the same cpu but with trash Gpu and he gets stable 240 frames and i dont understand. I have been going on youtube videos that help you increase fps and performance
so its a new issue
Lol
sorta yes
you were getting good FPS, but now, suddenly, you arent?
No ive seen almost a downfall of fps on some games
was anything done to the machine at all before this happened?
like, a part swap or upgrade
software install
Might of i went into setting from youtube videos that would help fps
i might need to get new parts
do you want the link?
so you changed up some graphics settings, and now its performing worse because of it
i cant really tell that much, i dont even know how much they worked or didnt
i dont care what your pc is, if it was fine before, and you made a config change, then its a software issue
oh gotcha
heres what you do. Get DDU, ill link it shortly, run it, then go and install the latest graphics drivers for your PC
Guru of 3D: Computer PC Hardware and Consumer Electronics reviews
so this is DDU, it will remove all previous driver installations
run the application inside, its labeled DDU v18.0.2.3.exe
ok thanks
well, extract the .exe to your desktop first
how do i do that
there is no ddu
did that download work?
it just took me to a website with a bunch of links
aight hold on
this is DDU
its a self extracting zip, it will extract it into a folder, and you can run the application inside
its labeled "Display Driver Uninstaller.exe"
i hit extract, where would i find it?
wherever the file downloaded to, the folder extracts
ideally, you would do this in safe mode, but thats too complicated
lmao im sos lost one sec
well, when you find it, you will run it
you will get a pop up, hit Yes
then you will get another pop up, hit ok
you will get another pop up, just hit close at the bottom
yet another pop up, hit ok.
then select GPU from the drop down box
ok]
so im trying this again a pop up came up saying extract to, where should i do it to
ok so where do i go
says like temp state
put the file you downloaded on the desktop
ok so i got the file on my tesktop
do i just hit gpu then update?
you hit GPU then at the top the Clean and restart
ok and thats it?
then just dont touch anything
ok thanks so much
were not done yet tho
ok what do i do after
did you click Clean and Restart?
yes
and it rebooted?
my pc?
yes
not yet
then just keep waiting
cool
Back in
does the resolution look like crap?
Yes
good
Does it also mess with your hz
Download the latest GeForce drivers to enhance your pc gaming experience and run apps faster. Automatically scan your PC or search the driver database for compatible GPU drivers.
You need to go here and install the latest drivers for your card
Ok
Ok I think it’s done
so, did you download the driver from the nvidia website
yes
it took my to geforce experience
is the resolution going to fix its self?
oh i think when the driver was done it fixed it
Ok, so delete all the leftover files now
The DDU program and the package you got from nvidia
do i just right click and hit delete?
Yeah that's fine
Now test it
ok
Play a game that ran fine before, but now ran like crap
ok
i assume its fixed?
Is it normal to have 2-3 cpu cores running significantly hotter than the rest (~15C)
ok uh https://pcpartpicker.com/list/pbZwHB i got a parts list, this is his build. I know you guys could probably do a better job so, pls help. Could you get a better build under $500 usd with a pc, monitor, and mouse? (already have keyboard)
Go completely used. Find a used optiplex and a GPU if you want to keep it simple
if its all new, what would be the best build that configuration though?
go dual channel on RAM, can't do much else with such limited money
will someone help me
¯_(ツ)_/¯
Say your problem first and people will be more likely to help
ok
I bought a GTX 1650 low profile card and 500w power supply to make sure the card will work and I HAVE 8 GB OF RAM after I installed the card in my computer it worked on the display before I installed all the drivers it worked but after my PC asked to restart it it worked but didn't get to the windows home screen it just stay black screen how can I fix that
hello
do you see the bios screen at all
yes I can open bios but I wont open the windows home screen it display a black screen
now I am not using it on the intergraded graphics card
I am on the intergraded card
wait you can boot to desktop on the integrated graphics?
if you have integrated ye
I want to put my graphics card it is 1650
I first set up my pc on integrated
uh you have to change the main output to the GPU i believe but idr how
with the gpu in tho I think you need it plugged in gpu

