#building-and-recc-chat
1 messages · Page 353 of 1
Watch the vid
ima read my girlfriend a bedtime story and come back chat
Ok see the side with the black boxes
yes
That's the side up
that’s the side that i will be able to see when installed?
I mean stock was bad in 30 series and that was when they were on different manufacturers now they’re both competing for 4np
It should be if none are on the other side
this the other side
Imagine having to fight Apple for wafers
anyways chat ima read my gf a bedtime story
Just look at the notches and you'll know what direction stuff goes in
If it doesn't match up either way you turn it, then it's probably incompatible with that slot
Yeah I believe it's black boxes side up
gotchu tysm
Insistant on that bedtime story 😭
Yall he already left lol
He was on demon time to read that bedtime story
Felix wheres my bed time story
Hold on I keep those between my butt
HURGH
ARGH
Ok you ready for the cat in the hat?
I’m a green eggs and ham person
LMFAO
Prison pocket
I'm sorry I had to yeet that
I mean
That was funny af

Racoons.
I make it work
I know the lore
Which is bigger, dr seuss book or raccoon
Thats the real question
I went to a breeder for minis
Hey, the bigger the better
I don't have enough space in the trunk for XL

Mods this man in the white van is scaring me
i’m back and i looked at the vid and linus had a different mobo, so idk what to do tbh
right one is closest to cpu
I thought you were reading a bed time story
i finished
she’s fast asleep
😨
Those little suckers look like you turn them to slot the storage in then they hold it down
Check the manual for how they work
I don't have anything like that
Yeah it should
🔥
Yeah
Im a mini mod
literally no idea
Where is the correlation in that reply 💀
Fascinating L from gigabyte
like bruh
I meant to what felix sent
oh
See if you want to ping felix and harass him for his good nature, just pull one of these @cyan ravine (dont actually)
Why didn’t you put it in the main slot

it’s not in yet
@broken barn https://m.youtube.com/watch?v=FZRLuyMV4aU
In this video I explain how to install an M2 NVMe or SATA SSD on a PC motherboard that uses a plastic clip / fastener instead of the more traditional screws. This type of connector seems to be becoming more popular, especially on Gigabyte motherboards.
Also put it in the main slot
Maybe the main slot is the friends we made along the way
Looks like the main slot has a ez latch heatsink
And I’m almost willing to bet it has a ez latch for the nvme
It might do
Considering the third slot has one
Night dude
Imma head out as well, go read my copy of cat in the s- oh felix took it
Ima pass tf out
i don’t get how i’m suppose to
BUILD!
bruh
read the manual
I thought i was cooked when i built my pc 💀
oh shi
i’ve never built one 🔥
always got prebuilts my life
He misinterpreted this from Felix
Ive never even owned a prebuilt, this is my first pc
Oop
just read the motherboard manual
Did you screen record your camera app?…
bruh my screwdriver so ahh
pro tip: go build your computer fully and come back here after
ts so ahh 💔

You can get a screwdriver at Walmart for a dollar
Consciousness fading, napping engaged
night
Nah ima wake up in an hour for some lectures
He's sleeping
oh
Well not really he's an aussie but just gone atm
bruh it’s the gen 5 thing
i don’t even think my nvme is gen 5
screwing ts back on
wait no seems correct
i think
Gen doesnt really matter there
M.2 is a form factor, as long as it fits in that its good
guys i’m scared i just did something
@rain carbon i was putting the cpu, and it wasn’t fully actually in, so i slid it in, i kinda just pushed it, it seemed smooth but im nervous
it should be fine
If you nudge it around a bit horizontally does it feel secure?
yes
ima put a pee size glob of thermal paste and close it
The more you put it back on and off the more chances you gives yourself to make a mistake
good point
Close it first
what about the thermal paste
Thermal paste isnt applied yet
It would get stuck on the socket cover
Socket cover gets popped off when you latch it
Just make sure its fully in
wait are you sure close it, it wasn’t this elevated when the cpu wasn’t in
Know that it will take a good ass bit of force
That's the aformentioned socket cover
what does that even mean i’m scared
LOL
One sec im sending a pic
so this is the part where i close it
i thought it pops off when i close it
I'm sure you've seen builds before
Clearly you haven't closed and locked the retention pin
That level slides in that little thing
Hes VERY new to pc building
Ohh gotcha
Very new
very so plez be extra simple with me
I'm impressed 😂
Honestly then yeah
I thought "Surely I don't need to redraw the arrow"
LOL
That's why I assumed he wasn't new
so do i close now? and it pops off?
Yep, and put force on it until it goes into that slot
Pull the lever all the way down and slip it underneath the little hook
until it goes into the thing that holds it down right
bet
You want it to make contact with the pins, otherwise the cpu wont work
Dont worry about damaging the pins, just dont go past the hook
Yurp
It feels scarier than it actually is
it… came off, beautifully
Instead of a video send a screen recording of camera lol
i’m on ft with my sleeping gf it won’t let me
Now you can apply paste
okay
my dirty fingers have stained the cpu very little
Non issue
😎
so a glob of thermal paste right down the middle
and then it should be good?
pea sized
?
Technically an X gives the best coverage
There's no such thing as too much
^
Paste is non conductive
It just gets messy if it spills out
There are some conductive pastes
But it's fine
Hasn't been an issue for "too much" for half a decade
Hardly any
so even in that pic isn’t too much?
Ur fine
Just a pain to clean
Draw a cross over it
Hence messy
Its more like, do i wanna suffer cleaning it out later?
And put 4 dots between the spaces in the cross
Thin
But covering the plate
That's more than enough
More contact with paste = the better
Weird looking x
did i do good
Also holy glob 
is this good thing
or bad holy glob
I mean it wont hurt it
i can take some off
But its just a bit much
Not too much
You done good
😭
You will make his brain short from the specifics
That's not an X Lmao
LOL
Ive had to take a toothpick to it before
It's fine guys
To clean
Like seriously
I can trust buying a pc from you cos I can tell you wouldn't miss anything
💯
Blob works
Yeah
It works
Im a picky paster
there we go
BOOM
PERFECT?
Leave it be, its good
You got this fam

now what for the cpu
No but it will completely cover your plate so no need to change 🙏
Should be just fine
Hope it's not stock cooler
They're all specific
hmm i can do the nvme for now
We can't guide the cooler
I doubt, i think someone made his list here
AMD's stupid spring loaded screws suck ass
You put paste on, I would do cooler so it doesn't go everywhere
So true
does paste dry out, and if it does does it matter
Yes and yes
But moreso so you don't make a mess
It doesn't like that but you don't want paste to fall off the cpu
Do cooler
i’m gonna look up a vid for the cooler rn, i have a beefy ahh cooler
Nawk-Tuah
They put the master beef in the soda
That's just thermalright dude
Alright im learning cliff jumping
No parachute
No it aint, wheres my old man brown
Left behind with his brown pants
Thermalright is for peasants who care about good performance without wasting money
big ahh cpu cooler
Cpu
Look balou
He got the noctua fans
Nawk tuah
nawk tuah cool on that thang
Where arctic 🃏
I still can't believe intel nearly banned me for this joke
Its already dead anyway why does Intel care
You nawk tuah'd on their thang and they didnt like it
The person who said it has also dropped off the face of the planet
(As she should have her fame was not deserved)
i can’t find a vid for the
Thermalright Core Vision ARGB 72.37 CFM Liquid CPU Cooler
sigh
I RMEBER LOL
intel is sensitive ig
Deserced
Just look up thermalright install
I turned off autocorrect on my phone
what is it the same with all of them
Look for any of their watercoolers
Im faster at correcting myself than my phone is
Should be more or less
The thermalright manuals are actually very well done too
You can trust them
Thermalright is love, thermalright is life
They even colour code the parts
feel like a home depot gramps but i’ll open it and read it rn
Why do you think they're not called Thermalwrong bro
why does cpu thermal paste smell like literally nothing
I am remaking the shrek is love copypasta now as we speak
Oh god
Why u sniffin paste bruh

(It's optional)
off the bat… wtf
i mean i got this
Yeah the instructions you sent was for intel tho
Yes read it
Go to the AMD ones
oh there we go
Yeah now read the right section and use the right parts you should have little trouble
Be sure everything is screwed on the right way around, some pieces can go on upside down
I made that mistake
Fixed in 5 seconds tho
And secure in a cross pattern
Don't screw in just one all the way
You never want to cut corners on your PC’s power supply. So check out what Seasonic has to offer at: https://geni.us/vrtx
We’ve done plenty of build guides before – But now we’re taking it to the next level. Not only will you know how to build a PC, you’ll know how to build ANY PC – This is the LAST guide you’ll ever need, now updated for 2024!...
Vid shows how
I was only nine years old. I loved Thermalright so much, I had all the fans and heatsinks. I'd pray to Thermalright every night before I go to bed, thanking for the life I've been given. "Thermalright is love", I would say, "Thermalright is life". My dad hears me and tells me I'm Thermalwrong. I knew he was just jealous for my devotion of Thermalright. I called him a Nawk Tuah fan. He slaps me and sends me to go to sleep. I'm crying now and my face hurts. I lay in bed and it's really cold. A warmth is moving towards me. I feel something touch me. It's Thermalright. I'm so happy. He whispers in my ear, "This is my mobo". He grabs me with his powerful Thermalright hands, and puts me on my desk chair. I open my PC for Thermalright. He enters my PC. It hurts so much, but I do it for Thermalright. I can hear the cooler mount cracking as my eyes start to water. I help screw it in. I want to please Thermalright. He roars a mighty roar, as he fills my PC with his cooling performance at a great price. My dad walks in. Thermalright looks him straight in the eye, and says, "He was Thermalright all along". Thermalright leaves through my window. Thermalright is love. Thermalright is life.
Ok chatgpt
Ouch 😭
Thats Thermalwrong of you
I mean don't destroy it but tight is fine
Don't overtorque it
i feel like the first screw is easy and the second one is way harder to screw is this normal
As in don't go ham lol
Ye
It'll be tough cos it's putting pressure on by the second one
They'll all feel tough after that
Don't screw the first one all the way in
It won't work
Need to do a little bit on each one at a time
Ok byeee

Typically you wanna go from one corner to the opposite
So if you do the top left first, your next should be the bottom right
It creates a better alleviation of pressure
And yeah dont fully screw in anything until all screws are in
After that just make adjustments in a circle until everything feels screwed just all the way in, never fight a screw to go deeper but you want to make sure its tight enough that it wont sag
You took the plastic off right
I cant tell lol
Also scratching the heatsink wont touch performance remotely
Those scuffs aren't where the cpu ihs will be in contact anyways
i took the plastic off, and i also cleaned both the cooler and the cpu of its thermal paste and ima start tmr
i don’t got time today
@cyan ravine @rain carbon
this is fine right
would a q tip with alcohol work for cleaning it or do i really not have to
Isopropyl alcohol, yeah
Any suggestion for extended storage?
@lone flame @rustic wolf Yall are the goats
I ordered my 6700 xt
yesterday just wanted to tell yall the goats
Like long term storage?
Of data? Or of the PC?
Wait
My bad for the ping
Exemple
Expand your storage space with no hassles using this WD BLACK external hard drive. Boasting a 6TB capacity, this device offers more space for storing up to 150 and games. The 2.5-inch form factor makes this device highly portable, and the metal top covering gives a sleek look. The high-performing HDD platform technology and up to 130MB/s speed e...
You're probably already passed the "I need advice" part. But I usually use a paper towel (or a couple) to get most of the paste off and then finish getting it off with a couple of q-tips and 99% isopropyl alcohol
Mentioning the paper towel part in case you're struggling on the IPA part lol
If you're using any lower percentage of IPA, definitely dry wherever you see residual IPA (even if it's on the CPU)
Search the world's information, including webpages, images, videos and more. Google has many special features to help you find exactly what you're looking for.
Yeah
Better yet, ask me something but don't make it something simple like "how do I" or "how to..?" Just go to Google lol
Should I upgrade my CPU or monitor resolution. Currently running 1440p 144hz with a 9700k + rtx 4080. Debating on which to update first.
What's your current monitor?
For reference I'd be upgrading to a 9800x3D or a PG27UCDM
Old dell 1440p 144hz TN panel. I'd have to dig for the model number.
I would say upgrade the monitor but don't pay the ROG tax. There are other options that have similar specs for cheaper
"Then which monitor should I go with?" Idk but I'd imagine @mossy venture would know
Also, getting that 9800X3D would be a whole platform upgrade. I think those 9800X3D CPUs are still overpriced atm. It's probably best to wait for the prices to come down, not to mention that it would come with the expense of a platform swap (including DDR5 memory)
AMD used to be the budget option but that's not quite the case anymore lol
Yeah, I'm tempted to just get a 7800x3D and mobi and wait for 9800x3D prices to come down. The problem is I want to go OLED and currently the PG27UCDM is the only one with a proximity sensor and 4k. MSI has a 1440p 480hz one but their 272urx doesn't have the sensor.
Only reason that's an important feature for me is I have ADHD and I don't trust myself to reliably turn off the monitor when not using it.
I didn’t do much lol
6700 XT is still a solid card hope stuff goes well with it
Found it. Its a dell S2716DGR
so i could use like 70%? but just to be sure to dry fast?
Yeah but I definitely recommend going to the store to get 99% if you can
ykw yeah
walgreens?
70% is fibe
who do i troost
yeah walgreens should have some
Just have to let it dry slightly longer
Just get 99% to be safe
You can do 70% but definitely try not to spill any of it and dry it off after you're done cleaning
^
i can be very careful and just damp a q tip and swab off all residue
I've used 70% for years. 99 is more foolproof I suppose
and then pat with paper
bet
i’m at school rn
Yeah but DEFINITELY be careful
but yeah i got the same alcohol you’re suppose to get a vaccine with
I mean as long as everything's powered off it's not a big deal
only alcohol i got rn is the drinking kind
bet, do you think it’s too hard to mess up? i’m not clumsy, i’m uneducated
Yeah if you're not clumsy then you're fine
i got the vaccine one
As long as everything's powered off, you're good
😎 never getting electrocuted again
i took apart a LED Disco Ball once
got electrocuted
LOL
ts was like a tazer
It's less abt you getting electrocuted and more about the components
yeah, what would mess it up? in a scenario where i mess up cleaning it
If you poured a rediculous amt of iso on and booted up the PC before it all dried it could fry the mobo and/or cpu
But iso (even 70%) dries really fast
so basically it’s almost idiot proof
Yeah
I would be more concerned about reaching the exposure limit if you submitted a PC in IPA

Submerged
If you're just gaming, I'd stay with the 7800X3D for a bit (like until Ryzen 10000. That 7800X3D is better for gaming than my 7900X, despite my CPU having four more cores
Also, OLED burn in isn't as big of a deal as before. Lots of people buy an OLED and don't experience the burn in
If you're worried about the burn in, I recommend just getting a mini LED monitor instead. It'll still look way better than the TN you're currently using
And then when you're ready for a newer monitor (after that mini-LED monitor), there will probably be more OLEDs with better options and have even further reduced burn-in
chat what should be the best order of building a pc
i have my motherboard cpu installed and ram installed
everything else isn’t ready yet
i don’t wanna have to do anything annoying so what’s the best order
Motherboard, cpu, PSU, ram, storage, all the fans and I/O, cpu cooler, gpu
Are you water cooling or air cooling?
Air: put the cooler on the motherboard before inserting the the motherboard into the case
Water: put the cooler on the motherboard after inserting the the motherboard into the case
I normally do it after for both
Same
That EPS is so hard to reach
With a huge air cooler in the way
(plus the fins are often sharp)
I've always done air cooler onto motherboard > motherboard into case
Man what kind of air coolers are y'all using
swear if one of y'all mfs say "the case"
Any tower cooler
Downdraft coolers are fine ig
But if you bump your hand against a tower cooler enough
You'll eventually cut yourself
I just realized that the Hyper 212 Evo (from the Bulldozer era) is the only tower cooler I have 💀
☠️
Yeah I know it's not near as big of a problem but I also have bad habits when it comes to monitors and any feature I can have to prevent me from causing problems is greatly appreciated.
So you state that you have ADHD and that you'll probably forget to turn the monitor off (I have ADHD too lol I understand). Do you leave your PC on, therefore keeping the monitor on as well? You can set your power settings so that you can have the monitor turn off after you've been inactive for however long but not put the computer to sleep
You don't have to fully power off the monitor to preserve the OLED's burn-in health
I do leave my PC on for weeks at a time. Last time I rebooted it was a week ago when I boosted the overclock on my CPU to get better stability in MH wilds.
And it normally goes to a screensaver and doesn't go black on my monitor. Its one of those things that I use my PC as a remote entry point if I need to remote into my home network. So it's just habitually on 24/7.
ohhh gotcha
hmmm
Might be a goofy way of doing it, but have you heard of Switch Bot?
It's like a small roboto that you can setup to a hub, which will connect to your Wi-Fi so you can access it remotely. Perhaps set one up next to the monitor's power button?
Then you can be like "oh I forgot to turn my monitor off" and have the switch bot do it for you
Or just get a mini LED panel (still WAY better than the TN you're using)
I mean you should just be able to have the screen turn off after X time
Not sure if remote access will turn it on again but surely there's a way to keep it off
I've tested and run into issues with the NIC on my PC going to sleep when it does that. Turned off all lower power settings for the mic and still run into problems with it :/
Yo guys, how bad is it that my power surge protector isn't grounded? I converted it from a 3 prong to 2 prong w/adapter cuz my outlet only supports 2 prongs.
If so, how easy/expensive would it be to upgrade my outlet to a 3prong/do something that would make my surge protector grounded?
Pretty sure the extra current 'surge' is sent to the ground wire in a normal surge protector
So without that the effectiveness will be diminished
So I'm cooked
Pretty sure PC power supplies can protect the rest of the components from a surge, but it might fry the PSU. Not completely sure, I've never lived somewhere that surges are a real worry.
yeah rn im just making sure my pc is compeltely safe, cuz ive heard that surges can happen through ACs, refrigerators, or any other heavy applicances when they turn on
or lightnin strikes
or just plain faulty wiring in my place
Worth it or no
What in tarnation
So thats a no?
i personally wouldn't, MSRP for that is $999, but that's a myth so maybe a little more than that would be worth
1600 seems alot for me
I bought it already because it was my second opportunity to get a 50 series card. Probably gonna cancel like i did with the $1,000 asus 5070ti
Msrp is a thing of the past
I think you’re right
1600 is too much
lol
if u got bank tho, why not 🥶
No
Wait till it burns your house down or doesn't run well or as fast as it should cause its missing rops
Or it just doesn't work cause the drivers killed it
I can't believe a working gpu that is exactly what you paid for is the standard these days, but
That's a gamble I'd not take
Yeah I canceled it
Just don't buy anything this gen if you don't absolutely crucially need it
MSRP is off the table, and nvidias GPUs are not even working rn
I have a 3060ti and i dont play many gpu intensive games. I just wanted an upgrade
Woulda gone for a 7900xtx or something before the new GPUs launched
That's basically a 5070 already
Worth it for the seller, wooo
I think i might just buy a new case and aio
Real the seller is having a field day bro
Take a 9070 XT out for a spin and get near 5080 performance for half or less of that price
Truee
Used XTX - same idea
Undervolt it and go even further
And with the knowledge that it doesn't melt or just stop working or is missing ROPs
(Yet?)
I hope they don't have the same issues or I'm actually going to perish
Maybe ill just wait for the 60 series lmao
Both manufacturers with the same issues will kill us all
Intel quick fix drivers and save us
50 series has been an absolute skip for 99% of people
You can't even get msrp either
So it's almost like 99.9% but I can't count how many gpus they've sold of nvidia
I know it's more than 10, probably
Maybe 11
Less than 100 likely
Possibly even 12
Like you can buy a 5070 for 750
800
850
2 months ago
That was a 4070 super
Literally
Lol
$590
Uses the exact same die
Whole 50 series is a skip, the msrp picks seem rarer and rarer at that
I bought the 4070 super a month before the 50 series launched but returned it so i could get a 5080
Nooo
I should NOT have returned it
Rip
Go find a 9070 non xt for msrp
Tbf no one expected this
You might luck out
whats worse to me is people be like "just get a 4090" when that's also overpriced garbage at $1400 USD
gpu market is a hellscape
You'd be lucky to get 1400
Selling/returning your gpu before the new ones are available is pretty dumb tho
Halo cards hold value until the next gen well
3090s were like 1400 until the 4090 dropped for example
Then after, $700
Lol
They resold at that price and more
5090 is
people would pay 50k for a 4090 lmao
4090 was like the first valuable titan class card in years lol
my point is that 1400 is a lot
thats it 😭
i hate that those prices are normalized
xx90 stopped being titan series when it stopped being called titan series
it became a consumer class
so it should be treated as such, and its ass for consumer class
I mean, idk. Titan wasn't like a corporate thing, it was more for individuals using it for work, like content creators and such
And AFAIK Titan still used GeForce gaming drivers, so it made sense to unify the naming scheme
You had the option of gaming or studio drivers
But now most of the currently supported GPUs have that option
isn't the studio drivers the same as the gameready, just validated to be stable
I thought they were somehow optimized for editing/rendering but I've never actually looked into it
Ok so I guess its the same as the radeon drivers too
Amd pro and nvidia studio drivers are basically the same but pro/studio has more stability, and may have less gaming performance depending on the game due to not being updated as frequently
Hello, I will be responsible for you. I live in Turkey and I want to come to America and buy a graphics card. Where is the Newegg store address? Where can I buy a graphics card? Can someone help me buy a 4070ti super graphics card?
newegg doesnt have any brick and mortar storefronts; only online
If I come to Beijing, America for 1 day, where can I get a graphics card?
Well, if I come to America for 1 day, where can I get a graphics card?
hmm
i'm not sure if microcenter still has stock of that
honestly idk if there is really any physical store where you can get a 4070 ti currently
Newegg has withdrawn from Türkiye. It does not ship to Türkiye. I am very upset about this. I have to come to America.
Is there any stores that are local to you?
They can get it from a distributor
Or buy used
Damn, Asus increased the price of the pg27ucdm another $100 smh. Greedy bastards.
guys help meee
With?
Here is what I could find
Wait thats a super
Oops hold on
That converts to like 900usd

So the 4070ti super is going for just under 49000
But you can get a 7900 xtx for the same price
hello fellow humans
I am in need of assistance regarding an acquaintance of mine.
I need a PC list, under $1000 USD, for gaming
The catch is that he already has a GPU (it's a 4070 super but it seems he doesn't want to return it, so that part's non-negotiable
I've come to the conclusion that fitting a 9800x3d isn't possible, but perhaps someone here could prove me wrong?
Thanks for any help
@analog hearth
https://www.zotacstore.com/us/zt-a30900j-10p-r
Stop getting into debt 😭
GTI says otherwise
My options were listening to my Focus tell me to throw money into it (repairs, etc.), or a GTI that I’m now paying for
So obviously I chose the fun option
GF?
Catch me idc 💀
Emailing her rn (we're friends for some reason)
How much was it?
I got my 2012 srx4 for $6000
Not as nice of a car obv
But still nice asf
$25K (obviously got a loan for it)
High interest rate but I plan to refinance within a year. Also I still see it as a better option than fixing the potential upcoming repairs that my Focus had
Yeah i was tired of my 2007 camry with almost 300k on it
My insurance is an extra $100 a month but its still decently low considering I'm 19
AMD Ryzen 5 7600X, ASUS B650M-A Prime AX II, G.Skill 16GB DDR5 6000 for 300, worth or nah
If the 7700x bundle is still $400 or less grab that one
I'm surprised that going from a Focus to a GTI only raised the insurance by $100 per year (I'm not paying lol my father is)
Better mobo and you don't need to spend $50 on an extra stick of ram
Ight I’ll check it out
Until i have a job my parents are but I'm going to be paying them back
I would like to pay my parents back but it's a lot for me rn lol
This is my list rn: https://pcpartpicker.com/list/Bs4Hnp
Should I change cuz I see the deal
AMD Ryzen 7 7700X, Gigabyte B650 Gaming X AX v2, G.Skill Flare X5 Series 32GB DDR5-6000 Kit(370 USD)
Yeah i would
Id also highly suggest a used/refurb option over the 7600xt
AMD Ryzen 7 7700X, Gigabyte B650 Aorus Elite AX Ice, G.Skill Flare X5 Series 32GB DDR5-6000 Kit, Computer Build Bundle(420 USD)
Same difference
So get cheaper
Yeah
Wut do u suggest for gpu?
Ill get a few other options
$280 3070 isn't bad but id rather a 2080 ti or 6700xt for the extra vram
Well I don't see any other decent options in the places I normally check, but a 3070 for $20 straight from zotac if you'd rather
https://www.zotacstore.com/us/zt-a30700f-10plhr-r-1
3080/6800/6800xt are also good choices
Ok
https://pcpartpicker.com/list/kfpXh7 case and ssd are same difference, just a matter of personal preference especially case wise
Part List - AMD Ryzen 7 7700X, Radeon RX 7600 XT, BitFenix FLOW ATX Mid Tower
The psu is an extra 100w at same price and quality, and just swapped to the 7700x bundle
Just saves a little money to put some more towards gpu
This is also just as good
https://pcpartpicker.com/product/zfGhP6/adata-xpg-core-reactor-ii-750-w-80-gold-certified-fully-modular-atx-power-supply-corereactorii750g-bkcus
Thx I appreciate it
Np
Do u rec any monitors?
How much would you want to spend?
200 at most
chat i just had a pc guy tell me that my ram sucked ass and Gskill is the way to go
And it also depends on the gpu you end up with
Hes wrong lol
G.skill is the same as every other brand (except corsair)
hes been doing his job since he was 8
Ram dies are made by three companies
and he’s went to school for it
Hynix samsung and micron
Let’s say 3070 for now
and his business has a full 5.0 star review with 182 reviews
G.skill outsources ram dies just like every other brand
idk man
Ok.
Believe what you want
who do i trust because they said you guys are wrong
Google is free. Go learn about ram dies.
i promise i’m not oblivious i just don’t know what to believe
So the 8gb vram will be limiting, especially for 1440p, but 1080p is at a rough point atm. 1440p is a pretty noticeable upgrade in quality for not much more cost
This is a great monitor, and has amazing colour's
https://pcpartpicker.com/product/7QsV3C/acer-nitro-xv275u-p3-270-2560-x-1440-170-hz-monitor-umhxxaa302
This dude just bought one
oo it’s the one you gave me
I have one slightly better than it and love it
This will be a tiny bit better for competitive games at the cost of that amazing colour accuracy
https://pcpartpicker.com/product/QV3WGX/lenovo-legion-r27qe-270-2560-x-1440-180-hz-monitor-67c5gac1us
why is there so much CHROME
each gots its purpose
bruh 😭
Ight thx
This is the Toyota of monitors. It's decent, but 1080p will look worse ofc
https://pcpartpicker.com/product/DqQKHx/koorui-24e3-240-1920-x-1080-165-hz-monitor-24e3
It also means you'll get higher fps to some extent, and it's less intense on the vram
3070 was a great 1440p when it came out, but game devs don't give a crap about optimization atp and a lot of games eat vram at high settings
Id be more comfortable with a 6700xt/2080 ti or higher like I mentioned
Ight
So 16vram
10gb+ ideally
6700xt is 12 2080 ti is 11
Performance matters just as much as vram
7600 is decent, the 7600xt is just a 7600 with twice the vram, but thats vram it's not strong enough to take advantage of
Aint no way. I got a g24f2 for $150 that performs just aswell 2 yrs ago
Yeah i heard even if u try utilizing all of it, ur fps is terrible cuz the chip isn't fast enough
Monitor deals are insane...1440 with 180hz at this price?!?!?
Market moment
Im glad to see the monitor scene benefits customers unlije gpu market
There's been some good used/refurb sales lately too
Like the msi g2724qpf or whatever it is at $120
Nice
3070 is a solid 1440p card?
It would be with more vram. Game optimization sucks in a lot of popular titles, to the point 12gb is limiting in a good amount at high/ultra settings
Though I was also running 1440p on a 3060 ti until recently, so it does really depend on you
Just depends if you'd rather better image quality while sacrificing frames or texture settings, or higher frames or higher settings
thetruebacca more like
3060 ti was 8gb
4060 ti was 8/16
Wait so was my original 7600xt fine?
No
.
might've been thinking about base 3060? That got 12gb when 3060ti got 8gb
7600 and xt are both 1080p cards
2080 ti, 6700xt, 6800, 3080, 7700xt and anything higher are all solid 1440p cards, since they're either 3070 performance or higher with more vram
7600xt is a good 15-20% worse than a 3070
So while it has more vram, it doesn't perform well enough to matter
Ah I see, I was confused
Otherwise newegg refurbished and a seller is have saved on ebay (named wazno) have good options
No reason to really
Mining is the same as any other task, except in a gaming rig a card heats up then cools down then heats up then cools down etc
Heat cycles like that actually hurt a card a bit more than constantly running it funny enough
Most miners also take great care of their cards, power limiting and underclocking the core while ocing the vram
Thats good to know
And make sure they're not overheating, since that lowers mining efficiency
should i buy the 6600 or the arc a750 for 1080p gaming? trying to stay under 1000
6600
1000 for the whole pc?
yes
U can spendway more on ur gpu
yea
ok
hold up i got a 7500F in my list alr
im trying to cut cost as much as possible
so i can buy a much better gpu
Part List - AMD Ryzen 5 7600, BitFenix FLOW ATX Mid Tower
Ah alr
Lemme adjust rq
Part List - AMD Ryzen 5 7500F, BitFenix FLOW ATX Mid Tower
I linked a refurb 3070 from zotac for $300 above, but smthn with more vram like a 6700xt, 2080 ti or better would be a better option
Uhh
Can I just dm you it so you can open it when it is working
ok
Alr sent it
Bruh zotacs site just went down again
Like the fifth time in the last few weeks
the thing is tho i still have monitor costs and os
You don't need to pay for windows, if you want a license you can find one for $20 or so online
Pls don't spend $100 on windows
idk whats legit and what isnt
i wont dw
Dms
I think I am going to add a external storage.
Do you need a lot of space or did you just fill up your internal slots?
Well kind off, I just don't want to make my internal 1 almost max when I reinstall everything. Already that flight simulator is taking a lot.
Why not add a second internal?
Either nvme or sata
Here's some options
https://pcpartpicker.com/list/bYztNz
Part List
With the B850, I think I got like 2 more spots
What mobo?
Yeah I'd just add another nvme personally
External storage is annoying unless you need mass storage like a nas
Annoying in what way?
From my experience shorter lifespans, easier to break, and slow
USB is much slower than sata
Idk about thunderbolt/usb c
I currently got 1 NVME from TEAMGROUP, I could order 2 mores.
I'd get a single 2/4tb instead of 2 smaller ones
Yeah, solid ssd
I will just check the motherboard.
Could spend a bit more if you want to on something like an mp44/mp44q or sn5000
I got a MP44L live, I could get the q 1
It looks like it's oos, sn5000 or the Kingspec one is my recc for 4tb
Alright, I will got with the kingspec.
Just realize, I can't put the graphic card yet...
pc guy said the storage is slow and that 7400 is better
he also said bad ram brand
"PC guy" is just wrong then
There's no "7400"
Ssd is also plenty fast
Silicon power is also a pretty good ram brand that has been around for decades
And realistically there's not really any "bad ram" outside of Corsair
(There is a 7400f though, but even that doesn't perform as well as the 7500f afaik)
At the default 88W PPT, the 7400F easily hits Tjmax (95 degrees Celsius) with a liquid cooler, a direct consequence of the inferior interface material.
Yeah maybe stick to the 7500F lmao
How come "PC guy" is less knowledgeable than the average redditor
Look on eBay or such
I’m tryna find one on amazon new
Pny rgb ram good?
Sure

$53

Hey everyone I’m a young dad and have finally gotten to the point that my wife will allow me to start gaming again. Is there any blueprints in this discord for components needed to build certain ranges of gaming quality?
My question I have is I would like to know what I would need to play any game at 1440p ultra and hit 240hz or more at basically all times. Is this even possible?
Kinda not
What is the absolute best possible build for 1440p then? I don’t care for 4k but I want the best possible 1440p experience
Asking that question at this point in time is asking to be effectively scammed at retail
Reason being is that the GPU market is a hellscape rn
Cards are being sold for WAY MORE than they're actually worth
Thanks, tariffs
Damn well tyvm for atleast replying brother, maybe I’ll stay in retirement until it’s possible lol
And also just plain scamming too
Stock
Greed
Is the big reason
Stock
Stock and greed
Mmhm
Yes
It's like the nike shoe market rn
Just do not get hopeful for anything
Good luck trying for anything
But mah air force ones
If you can manage an MSRP card or near that with any of them at all, you are honestly doing well rn
But it's so rare
Borderline impossible
You could pick out $4000 worth of parts (that would normally retail at $2800) and still not get 240 fps at 1440p ultra in a WIDE array of games
Oh there's a reason, but the reason is you're supposed to use upscaling and render in 900p so the dev gets to be lazy about optimizing
is there any news on the 9070xt and 9070?
They're in and out of stock
any toms hardware testing images
idk, or any benchmarks
I'm just patiently waiting for something better than a 7800xt at the same price lol
I mean if you wait 24 hours then like 4 people will have one and tell you if it's worth it
Myself included
oh wait it's not dropped yet?
They have, people are just starting to get them if they didn't line up day 1
Ohhh alright
They're insane for undervolting
I mean it's nitro model but is it actually supposed to be 770?
I thought it was low 500s
+400 MHz by doing - 200mV
Need that tbh
my 7800xt has been kinda dookie ngl, like not only in thermals but performance aswell
Is it challenger
pulse
overclocked, undervolt, it's like subpar performance
As for price, the tariffs have officially come into play. MSRP models will now be $720.
10-25% tariff is actually killing us
The first wave of shipments slipped in right before
Could be worse
We're in the second wave
Here the 5080s cost as much as 4090s did
nvm like 5 months ago @cyan ravine
That was undervolted?

