#building-and-recc-chat
1 messages · Page 113 of 1
but yes, it's pedantic at that point lol
i got 600 fps at 1440p with a 3090
and 600 is the engine limit
Original plan was a 3070 but the 3090 was the only one in stock at the time
Gonna upgrade tho once my 10700k can’t keep up with my games tho
But it’ll prob just be a new build by the time that happens
Interesting combo
can someone help me, roblox keeps capping at about 30 fps for no reason, I used to get 60 at the minimum since i use an fps unlocker but now with or without it roblox has low fps
when it goes back to normal 🗿
How do I take windows off of a hdd and put it on a ssd like make the ssd the boot drive and erase the hard drive
Macrium reflect. When it's done make sure to tell the bios to boot from the SSD, and then when you boot again you can erase the HDD.
Y'all putting standoffs on top of the motherboard? 
Lol
Ok
No worries, human mistake
Luckily I didn’t try to screw anything
Is that better
I screwed the three standoffs
Onto the case
yeah that looks right
Common mobo screws are just phillips & have a small lip, so possibly ignore the hex/phillips screw in 2nd pic.
Yes, but double check manual. Sometimes there's 2 screws like that w/ 1 being longer & for hdds or such. Seems like the correct one
Yeah it says
x18 mobo/ssd
And its that one
Does it matter if there aren’t enough standoffs for all holes?
Theres one that’s empty
What about the black loose one? Sometimes there's just a "guide standoff " in center btw
I didn’t knew those were standoffs
I used the three that came with the case
There were 4 already built in
But 4 hoes left and only 3 standoffs included
Okay all screws in
Just need a standoff below each mobo hole. Keeps mobo from shorting itself.
That’s my point
Mobo has 8 holes
But case comes with 4 preinstalled + 3 extra
Funky case to not just have 8-9 installed. See my previous pic.
the mobo can be secured with not all standsoffs installed
i wouldn't worry too much
Is that corner a big concern?
Not really
Its right below the pcie for the gpu
Other screws are in already
ye
Oh wait
There were extra standoffs
Just in the atx holes
…
Just noticed them
Do I unscrew the mobo?
Nevermind
They were wrong
Oh, matx mobo. That's why I posted that 1 schematic earlier. Spin mobo for a decent pic. 5 wires on bottom is wrong for sure
yeah I noticed
Just put them right following mobo manual
Now fans
Where do they go
If you have the fans chained together already then the one on the right is done, and the one on the left goes to the motherboard sys_fan header
That's the power for the fan though, not the rgb. It's supposed to be missing that pin, it's only the tachometer which will be reported by the first fan in the chain.
You could put it in the pump header but depending on the motherboard that could be a 100% speed all the time header
Yes that one
It'll be the jrainbow ones
The RGB cable yes
Jrgb1 or rainbow?
jrainbow
They’re suposedly argb
jrgb is 4 pin and won't fit
Which is the diff
yes
You can
For me cable management involves: Do cables clear the fans? Does side panel close? If yes, it's good
Cable management is for nerds
Nerds with hours to spare at that
As long as it closes
Its right right?
How does it look
Dual channel on b660 msi a pro is on 2 and 4 right?
The extra 4 pins for the CPU on the top left are optional, used for extreme overclocking, otherwise it looks good
No need to remove it since it's already in, just a note for the future
It looks like you have a 4+4 and then another 4
Yep
I have them all filled
It just provides more wattage to the cpu if needed for OC, right?
Ooh
Fpanel fixed from earlier?
336W rated
technically yes
might go higher, but I’d say the +4 stops being optional if running all core loads on an oc 13700K/13900K
or even just stock with removed power limits
Yep intel is really pushing the bounds of what "optional" means
I’ve seen my 13700K hit 360W with just aio cooling, which exceeds single 8-pin EPS rating
and EPS isn’t like PCIe where the spec is laughably underrated
considering what raptor lake is, not surprising
they basically just overclocked alder lake for you and added some cache
Try to plug it directly in a wall
UPS is even better, but most people don't have those
Looks like just a normal wall plug
If it's a surge protector yes definitely plug into that
I mean I can't tell that my surge protectors are surge protectors from the outside
they look like normal power strips
Gotta read the label
I don’t know if it’s a surge protector
😭
Do we have a problem if it’s on my rug floor?
It'll say the model number on the label, and you can google that to see the specs
Nah
The PC, maybe, if there's a vent on the bottom trying to suck air in
The power, no
Imma try to fit it on my desk
Says its a power tap
Might have to get an ups or a surge protector this week
I can't even find that on the manufacturer page, I'd avoid that and plug into the wall
lol
UPS is only needed if you need the system to stay running during an outage for a few minutes, or if you have dirty power
Certainly could be considering the origin location is Jiande City in China
You can use the bar for now but don't consider it a "good long term" solution
Soooo hard to diagnose too because it can look like so many other things
Make sure to plug into the GPU and not the motherboard
Give it a minute on the first boot
Double check that the storage shows up in the storage page
XMP will probably be on the memory page
Looks like a successful build to me
Next would be installing Windows
2666mhz says on ram speed
dont enable xmp until after you install windows
It's not a super high XMP I think so it shouldn't matter really
Generally you are correct though
I’m in boot options
i just had to go through this again. wiped my whole pc cause i changed my sound settings and it f'd everything up somehow
about that power plug thing
Uefi usb key?
yes
the walmart christmas light special though?
Pretty sure mine is still on a bland strip
and it's not a good one either
Not my real one, it's unplugged and bosedv
f10 if you have the windows usb in a slot
If the USB is created correctly then it should auto detect the installer and boot it
Still, a step closer to being exposed lol
Lies, there's thrift stores that'll charge $1 for a slightly less frayed one
my dad won't even be kind enough to do that
I mean it's one of those things that general society doesn't consider important so you'll have a hard time financially justifying to people
he says "it's working, no? then use it, your pc hasn't exploded"
i bought this wall plug surge protector years ago. idc where i go it comes with me. has a 1.5mil warranty on any device plugged into it if it fails and fries my stuff
How do I restart
Tell him you saw sparks
lmao
hit f10 save and reboot it'll load automaticly
Like I absolutely need a toilet bidet seat, it's life changing, but nobody understands that who can make that happen
It should pop up with a "save configuration and exit? yes/no" dialog
press f7 and go to ez mode then save and restart from there
tbh do you have another pc you can download the firmware update for your bios?
my motherboard is from msi as well and my bios looks nothing like that.
Which model tho
z690
force wifi pro or somethin idr specifics
That is one of the more recent interfaces for bios, not the most up to date but shouldn't be a problem
What version of key do you have?
Most people are good with home
idk idr what my bios screen looked like before i updated it. i ignored everything and updated it 🤷♂️
Haven’t bought it yet
I’ll do that tomorrow when I get some sleep
Home then, you can find them for about $25 easy
Or just don't activate it yet
Or ever
you literally can change that
sounds exciting
still stuck with
ACTIVATE WINDOWS
not to mention, the multitudes of ways you can get rid of that
bottom option
bottom
is it a new hard drive?
Yes
is your drive 1tb?
Yes
GB vs GiB
thats what you have free. the rest of the space is reserved for the os
and some windows things lol
so yeah you'll never get to use 1TB because windows calculates in GiB

idk? download discord? enjoy your pc?
1 GiB = 1024MiB, 1GB = 1000MB
That little difference in measuring is what you're seeing
oh right, assuming you havent enabled xmp restart and spam the delete key to open your bios and enable xmp
Nvm I have to turn xmp
Computer usage Speedrun 100%
Measures in GiB
Reports in GB
big fail
Gotta do every possible thing you can with a computer now
why can't everyone use GiB from factory
I accidentally restarted
it's just sad
The pc
it's gotta restart itself
lol it's fine
oh lmao
i cranked out like 10 downloads the second i did a fresh reinstall 2 hours ago lol
I have a storage drive that I store programs and games in
So I can make things easy when I reinstall windows
files, too
If you wired it to a RGB controller reset would be the RGB mode change, but since you wired it to the motherboard the OS will control it using the MSI software
That's a good idea
I don't store the programs itself, but rather their installers
I should do that at some point
Cause registry and all that bullcrap sucks to deal with
installers is a big brain thing
I think I messed up the windows install
Well
I had this experience before
i should do that
By restarting
msi center is available for free in the windows app store
Now what
Installers need new versions at some point don't they
😭
restart the reinstall
idk if you have access to the microsoft store on a bootleg version of windows though
yeah, but you can just update the installer
by well, downloading the latest version
I have 5 drives 🙃
Windows
Benching Windows
Games + Games (RAID 0)
Misc Data
Yeah I guess so
its literally not bootleg
they give it to you, for free
Does steam automatically know how to access the games if u got a new windows install
all they restrict is some visual customization
i don't get what your point is lol
But once you're done, it'll detect the games just fine
hit ok
But you don’t need to redownload everything tho righy
Which is super easy and sometimes auto detected if you use an easy directory like D:\Games
Keeps sending me to the same message
Ok that’s the good part
Especially with cloud save enabled
im still downloading a bunch of games pictures wont load for me right now in the browser
Yeah sometimes it auto detects
Not always in my case, cause I have folders upon folders lmao
hold down power button and shutdown pc
unplug and replug your usb stick and then reboot into it
.
there's really no reason to be distressed
yeah. what he said 
this stuff happens fairly often lol
I’ll shut it down again
if windows is actually installed on your pc you might have to go into your bios and select the hard drive windows boot ufei or w/e its called
it should be there automatically if windows is on your drive
How do indo that
when you boot up your pc, hold down the bios button
or spam it
we prefer the second
f2?
restart pc, spam del key, go to boot.
usually is f2 or del or something
depends on what your boot splash screen tells you
its del for msi
It's del for most tbh
i refer to my splash screen lol
nope
then pick hard drive and itll say windows next to it
that's something else
The splash does have useful ones like "boot select" but bios is almost always del these days
that's like, f12 or something
F7 on mine
i guess i will pause my downloads and jump into my bios to get pics for you
Thats my drive
drive as in thumb drive?
Is this a new SSD or a reused one?
that should be fine then, you have your usb flash drive plugged in right

Ok so it probably started to install Windows and is detecting the partial install on the bootloader
So do I click here?
is your usb drive plugged in?
Yes
Secure boot is probably keeping it from showing
You'd put UEFI USB key in that #1 slot
uefi usb hard disk should be the flash drive
what you have selected is your main drive
Ok booting on usb key
then same steps to install as before, except you should format the drive beforehand
THANKS
there's an option to do that before you initiate your windows install
Repair?
no, just do another install
yeah that
mine isnt on a usb key because mine already has wondoze on it
Ok I selected the language and stuff
When you get to the drive in the custom install, just delete the partitions that are there and hit next
you did see this right
Delete ALL partitions?
Yes
yep
Then hit next
Oh
Windows will handle creating the partitions again
Drive 0 Unallocated space
Only that shows up
then click on that now and hit next
That's what you want
yup. now hit next
Okay installing again
woo
😭😭
don't hit the reset button again
nah about like 1.5x
x10 for a monkey like me
2x maybe for installing twice 
hmm thats a fair point
It took me half a day to disable secure boot on my laptop to be able to play valorant after updating to Win 11 on my laptop

secure boot ew
win 11 is weird
That's not your fault, that's val and their stupid freaking anti cheat
but also, that's just valorant true
okay guys thanks for the help ❤️
anything after windows 7 is weird for me but you get used to it pretty quick. im old dont mind me
"You must have tpm to play"
F U now no one with anything older than Intel 8000 can play at all
my first pc had windows 98 on it
Took me 5 hours to build and have this shet running up
ay
but 5 hours for a first build isn't too bad
people have done it over the course of days
for their first time
gotta say, new intel stock cooler still does look good
i did my first build recently. took me 7 hours because i'm a perfectionist and wanted to cable manage everything that wasn't going to be seen by anyone anyways
At least you knew where to get some help too, imagine struggling without and having to search shudder Reddit for help
oh, god reddit
PCMR trolls everywhere
how do I connect to wifi
i also had my kids buggin tf outta me
Already put the antenas on
How do I skip this
should be able to just connect once you're in windows yeah
It'll ask after it reboots to finish the install
oh right w11

what was the secret sauce method again
Probably missing the drivers, that's ok there's a bypass
Shift F10
OOBE\BYPASSNRO
Enter
Reboot (automatic)
And it can skip the network now
That’s an O
that's the secret sauce
Or a zero
letter o
No spaces also
That really is the most creepy welcome screen though
now can you do wifi?
How do I turn wifi on
You'll need to download the driver and copy it to the USB
or do ethernet and download it onto the pc
I can take out the usb right
yep
personally i always eject it
Once you have that installed you can get the rest done
that do be wifi drivers
Chipset
https://download.msi.com/dvr_exe/mb/intel_chipset_600_700.zip
Bluetooth
https://download.msi.com/dvr_exe/mb/bt_driver_W11.zip
Onboard audio
https://download.msi.com/dvr_exe/mb/realtek_audio_R.zip
Other Intel goodies/hardware
https://download.msi.com/dvr_exe/mb/intel_me_adl_16.0.zip
https://download.msi.com/dvr_exe/mb/intel_gna_scoring_accelerator.zip
https://download.msi.com/dvr_exe/mb/intel_Serial_IO_adl.zip
good man
I lov u
Download drivers for NVIDIA graphics cards, video cards, GPU accelerators, and for other GeForce, Quadro, and Tesla hardware. US / English download.
personally i'd do geforce experience to do nvidia gpu driver downloads
Extract the zip and there should be something along the lines of install.exe
slightly less hassle
Right but the first time when GFE isn't installed yet you still need to go to the site
okay I'll install all the drivers
and then boot to enable xmp
and then go to sleep bc it's 3 am
and I'm tired
I do as well, anything tier C or higher should have protections to not explode at least
well It's the mwe v2 bronze
I was going to get the tuf but out of stock (not surprised at all
So tier B
Plenty good enough
taking the plastic off the glass panel feels nice
That peel 
Also good to have for gamers
https://aka.ms/vs/17/release/vc_redist.x86.exe
https://aka.ms/vs/17/release/vc_redist.x64.exe
Those are required by many games, and games would install older versions if you didn't install those latest ones
sleep is for the weak
Imma just let some games and stuff downloading
and go to bed
gn all
ty for the help
later
I am trying to replace the RAM in my (headless, no display) server, but I've tried two different types of sticks and it never boots with them.
It is currently booted with two F4-3200C16-16GVK sticks from G Skill, but those are from my desktop and I would love to have them back :P
Today I installed two 16GB 2Rx8 PC4-2400T-RE1-11 sticks from SK hynix to replace the G Skill ones, but the server fans spin yet I get no ssh access (presumably not booted).
Have you tried clearing CMOS when changing memory?
If the memory is ECC, does the CPU support ECC?
It could also be that the bios is waiting on a F1 confirmation for hardware changes
The motherboard is a H510M-HVS R2.0 from ASRock, and the CPU is a i3-10105F.
Would it do that even in headless mode?
It does not support ECC RAM, but I don't think the sticks I have are ECC.
Plug a keyboard in temporarily
It would either be "F1 to continue" or "F1 to enter bios", if it's the former it'll just continue, the latter you can F10 to save and exit if it's in bios (even headless)
I have not tried clearing the CMOS, mostly because I have no idea how to configure the BIOS without a display output, and I had changed a couple settings.
I will reinstall the SK hynix RAM and try.
Spamming F1 at boot for two minutes, then F10 a few times, then enter, seems to have done nothing.
It does sound like the CMOS would need to be cleared or the BIOS updated then
Too bad it's not a real workstation/server board that supports configuring over network
Yeah now's a good time to clear it
I could take my 3060Ti from my desktop but I don't have drivers or anything set up.
Drivers don't matter for bios
I can't reach the bat under the fan lol
Oh there's two clrmos pins.
Should I bridge them while powering on?
Actually I'll just bring the GPU.
For that you'd have the PSU plugged in and switched on, computer powered off, then touch the pins
Should only take about 5 seconds
How do I know it worked?
It'll say on the screen something along the lines of "settings cleared, del to enter setup F1 to continue"
When you turn it on that is
So I still need to do the GPU install heh
Yep
No source found from the GPU.
Fans are all spinning so it is getting power.
Is the RAM dead?
I cannot reach the clear pins under the GPU, so I did it before installing it.
I changed the stick to the other RAM slot and still no boot.
Possibly a bios update would help
It'll clear the cmos in the process
Using the memory that worked ofc
Good idea.
Ah yours does call for unplugging
Many boards say keep it plugged in so it grounds properly when you jump it
It looks like the BIOS freezes.
Right after entering it.
I see the version though, P1.50
Supports 10th Gen Intel Core™ Processors and 11th Gen Intel Core™ Processors; Supports DDR4 3200MHz*; 1 x PCIe 4.0 x16, 1 x PCIe 3.0 x1; Graphics Output Options: HDMI, D-Sub; 7.1 CH HD Audio (Realtek ALC887/ 897 Audio Codec); 4 SATA3; 4 x USB 3.2 Gen1 (2 x Rear, 2 x Front); Realtek Gigabit LAN*Actual support may vary by CPU
yeah
"for Brazil" lol
Weird that 1.40G came out after 1.50
Yeah.
Well it def works with the g skill ram, besides the apparent freeze.
So why not the sk hynix one?
AFR memory, should get along fine with Intel
Yet it doesn't appear to want to.
Try the hynix in your working system
(but don't boot windows if we're not sure it's stable)
It's uh, cannibalizing my desktop for now.
Fan, PSU, RAM, boot device.
Hmm I see
And I need it up as much as possible as my parents run some business stuff on it.
I told them we'd have likely 10 min downtime for the RAM swap, it's been an hour lol
Well for now I'd say the priority is getting it running again, by any means
Yeah I can just pop my own ram sticks back in.
Right. And you can test the new ones when you get the chance.
Been a month without a desktop, was hoping to have it back today lol
Yeah... I guess I could use my father's desktop to test them.
Just have to find a time it's not actively transcoding video or smth
Could just get everyone to stop everything for an hour
Thanks for the help! I'll update here if/when I figure it out/need more help.
I need help with something. I'm on the ASRock website trying to find the software for my z370m pro4 micro-atx board. But on the ASRock site they only have a z390 and a b365 micro-atx pro 4
Windows 10 or 11?
11
Audio https://download.asrock.com/Drivers/All/Audio/Realtek_Audio(v6.0.9231.1).zip
LAN https://download.asrock.com/Drivers/Intel/LAN/Intel_LAN(v12.19.1.37b_v2).zip
Chipset https://download.asrock.com/Drivers/INF/INF(v10.1.17765.8094-public-mup).zip
https://download.asrock.com/Drivers/Intel/Others/ME(v11.8.65.3606_ME_SW_DCH).zip
The chipset ones apply to both 10 and 11
They all probably do tbh
That'll be this one then https://download.asrock.com/Utility/MotherboardUtility/MotherboardUtility(v3.0.471).zip
Do you have more specifics on the error?
Just that
I launch it, a small window pops up that says abnormal termination. No screen flickering, no lag, no freezing of the screen
Welp all I'm seeing is people that ended up reinstalling Windows
So maybe try a third party app like openrgb if you don't want to do that
And make sure the chipset drivers are installed, that's how it communicates with the RGB controller
i wouldn't worry about sag too much
it's just visual annoyance
but if you really want to eliminate gpu sag, a holder would be the most secure option
Supports 8th Generation Intel Core™ Processors (Socket 1151); Supports DDR4 4300+(OC); 2 PCIe 3.0 x16, 2 PCIe 3.0 x1; AMD Quad CrossFireX™; Graphics Output Options: HDMI, DVI-D, D-Sub; Supports Triple Monitor; 7.1 CH HD Audio (Realtek ALC892 Audio Codec), ELNA Audio Caps; 6 SATA3, 2 Ultra M.2 (One supports PCIe Gen3 x4 & SATA3, the other one sup...
Oh no
is it normal that sometimes my psu whines
like a bzzzzzzzz sound_
but kinda loud?
doesn't surprise me too much, it doesn't really affect performance
I mean its not always
sometimes
and then it stops
I had just started downloaded matlab when the coil begun
lol
then it stopped
do yo know if the xpg argb vento fans have any rgb control software?
if they're argb, i believe any regular rgb software should work
don't quote me on that though
@mossy ventureI have a question sir
sure
I have an 860 evo as my boot drive currently and then just bought a 970 evo plus, should I change the 970 evo to boot or does it matter that much
the 860 already boots in less than 10 seconds
it doesn't matter too too much, but if you feel like it it is better to have the 970 as the boot
ok good just wanted to know if mattered much
I've a sata and nvme in my build, i still use the sata as boot
For certain things it'll make a bit of a differences, for like, 90% of normal pc use it won't change jack
ok then I won't do that annoying process
too much stuff that I'd have to save before formatting
Yeah once you're even on a SATA SSD a pc can become plenty snappy
yeah I've never had any issues with that I just got another ssd because I have an hdd as my 2nd drive but I want that upgraded
ssds are cheap rn idk why but I'm not complaining
Hey man I did the same
I just bought a boatload of SSD's as the price and sales have started getting really good here
yeah when I got my 860 evo a while ago it was like 70
970 Evo plus has been going cheap lately, it's a great buy tbh
now a 970 evo m.2 is 60 and a little at best buy lmao
I paid like 100 usd for 2tb which is fabulous in Aussie land
2tb?????
Ya
very cheap wth
2TB+ a bunch of A55 Satas at that price or less
2tb evo plus?
Ye
bruh that's normally 200+ at least
It was something like 150 AUD
it's only 130 on amazon rn
Which is about 100 usd
wow
yes it is
Sorry no 150 usd
wait
230
still not a bad price tbh
welp I don't need that much storage
apex and elden ring are the only big games I have that I play
I tend to use a lot of bulk storage
But it's also me getting rid of HDD's
Cos it's cheap enough that I can bother
I'll still have 2 HDD's for NAS storage tho
When I built my pc i should’ve cared more about noise than the rgbs
Noctua fans look so good
I might have to build an extra drive
500gb of pure happiness left
and I just hav a couple games lol
yeah if i was u id get at least 3tb
Its super nice not having to worry about deleting games constantly
what’s a good cpu cooler that not so expensive but that’s pretty good?
i want one that goes on top of my case but ian got the money for it
take your pick
you can always sell your dog
i thought you love your dog
it was a joke but i mean you could and your pc would have some cooling
my dogs were shot and killed by cops
yk a good one under 50 or around 50?
damn
i really don't. idk what your setup is and those 2 coolers might be way overkill for what you have.
Part List - AMD Ryzen 5 5600X, Radeon RX 6800, Phanteks Eclipse G360A ATX Mid Tower
what kind of dogs did you have?
What’s ur cpu
1 ful blood pit and the other a pit mix
5600x
Ohh then yeah you could find a bunch for like $50
Maybe even less but I wouldn’t trust those
i got a full blood pit people would offer like 5000 to breed with him cause he’s a pretty dog
can you send me 1?
that will be good?
Well there’s will be no over locking but it will be fine for gaming
The Hyper H412R, a new member of the longstanding Hyper Series, is an affordable, compact, and high performance air cooler. Its compact heatsink is a great match for small form factor systems. With 4 heat pipes and Direct Contact technology, it delivers great cooling performance that outperforms ...
i paid someone to babysit my dogs when i was out of state for a week and came back to find out they were released on purpose and the person i paid to watch them was the one to set them free and then call them in as "stray dogs"
i read the report from over the shoulder of the animal control lady
ok
back when i lived in a trailer park, pits won’t aloud so i would have to say he was a bully because they threatened to take him away from me
he was “ to big of a dog “ but he was only 15 pounds at the time bc he was a puppy
idk anything about amd but it looks like it would be good and is less than 50
like a ripoff of the bequiet coolers
adding fans that have rgb costs 5 bucks extra and puts you at 50
How about a $39 match to it.

https://pcpartpicker.com/product/ckwypg/thermalright-frost-spirit-140-778-cfm-cpu-cooler-frost-spirit-140
availability- out of stock. perfect
Bro this happened every time I turn my pc on
Just keeps doing that
Over and over
will the cpu cooler that comes with the cpu be good enough?
Like the PC turns on and off or?
his cpu fan turns on then shuts off
No it just turns the fans off and on
like full off
Started happening when I put the ssd and gpu in a different pc
And put a temporary gpu in it
Does it spin when you put a load on the cpu?
It happens when I turn on the pc
it seems that the top one does the same
might be. depending on what you're doing with it and for how long your doing it for.
Does the cooler spin normally when you put a load on the CPU?
probably like a month
It did before but doesn’t post
And I reset cmos
So the PC isn't posting right now?
Nope
So it stays on when you turn it on, and no display?
Yeah and the cooler turns on and off
I took off the cooler to see if cpu was getting hot and it was
do you have the fan plugged into the right header?
Wait is there any drive plugged into the PC
No
Just order it. Probably still arrive within 2 weeks.
Put a drive in
Ok
It usually won't boot without a drive
5600x with stock cooler isn't ideal but it can work if you really can't get a cooler, it'll get hot, loud, and throttle a bit, but as long as you're comfortable with that, it's doable.
Doing the same thing still
Also it went to boot cpu then vga and kept doing that
I’m going to put the other parts back I. See if it does anything
What GPU is in it right now and CPU?
I think it’s a 5770 and a ryzen 7 3700 pro
Hd
5770
It was in there so I could test out a different pc
But it worked in the other pc the hd5770
Also the Sata kinda broken on it
Bad photo but give you idea
You're trying to get into bios not try booting windows right? W11 probably won't let you boot with a hd 5770
mr1111 could you help me with a parts list next time you are free? Thanks
Budget, usage, and country?
Windows but nothing happenes keyboard and mouse don’t light up
But I’m going to put the 1660 ti back
And the 500gb ssd
See if that helps
I have one i want you to check over, but USA, general/lighter gaming, and 1000 ish https://pcpartpicker.com/list/nNQTLs
Part List - Intel Core i5-13400F, GeForce RTX 3060 12GB, Phanteks Eclipse G360A ATX Mid Tower
Yea I don't think 5770 would boot w11
only kinda? i wouldnt put that in a toaster if it needed it
It works tho
Main thing about the list i was worried about was cpu, mobo, and ram choice
half the plug connector looks like its missing and the sata cable are cheap
you can probably get a 30 pack of sata cable on amazon for 10 bucks
Already own the GPU or?
Almost 400$ 3060 is less than ideal lol
I think your right mr1111
Do you need any Nvidia features?
no
6 bucks you get 3 of them
Put the 1660 ti in it and mouse light came on
Thanks
The you should prob get this 6750xt
https://www.newegg.com/gigabyte-gv-r675xtgaming-oc-12gd/p/N82E16814932519
Basically performs like a 3070
For cheaper than the 3060
(minus Nvidia features)
Afaik 13400f is just a bit worse 12600kf, might be worth going for 12600kf still
ok
If you need wifi the Mobo is fine, if not you can save some money
You're welcome
idk why wifi is an additional feature these days instead of a standard. youve long been able to just go to walmart and buy a pc that has built in wifi without antennas. antennas makes the whole build look goofy.
And also I only paid 75 for the pc with peripherals
This pos on my floor has wifi and is almost 9 years old already
The WiFi card uses space and PCIe lanes that could be used by another SSD or a faster USB port
They aren't without antennas, the antennas are just routed inside the case
Got a 1660 ti ryzen 7 3700 pro 500 gb ssd 16 gb of ram taxer mouse 60 percent keyboard and mousepad for 75
Unless they are in which case eh
Razer * mouse
theres no cards on that motherboard in that walmart pc. its built onto the motherboard
… one PCIe lane
Yeah, but it's there. You just can't see it without removing covers.
Which is enough to turn a 5gbps port into a 10gbps one
With another controller sure
There's literally not a card taking up anything
The wifi is built onto the motherboard
Lol
It is
Although they don't seem to be connected
the wires are the antenna
Yep
its connected
but its not taking up any pci slots like i said
The card is removable, my Lenovo PC has one that's Mini PCIe

