#building-and-recc-chat
1 messages · Page 111 of 1
is there still an option in windows to require a password after you come back to your pc without it requiring it to go to sleep?
Yeah
i cant find it.
Gotcha. What fans would you have recommended? I got them mostly b/c it matched with the case, Lian Li brand. What memory would you have gone with?
Also, what's bad about the uni fans?
They put so many LEDs on them they had to make the frame thicker, which means the fan itself is smaller
If im getting stuterinng and game crashing does this mean that the psu maybe is the issue?
nevermind i found it
If it was the PSU you'd usually get the whole PC shutting down
Any number of things really
is not the cpu because temp is no higher than 80 while gamin'
The gpu is also running fine
What games do you have issues with starting off? And what are your specs besides the 7700X and 6950?
650 psu/ ddr5 6000 mhz ram/ msi 650-p pro/ liam li 215/ 2tb solidign: Rainbow six, I am playing high/med settings getting over 360 fps... gotta note this didn't happen yesterday only today. Can room temp be a factor?
Yes room temp can be a problem
A 650W psu is a little tight on the power budget
1440p?
yes
But I am not going to the max with it
I am like doing no more than 500 watt
at most 600
What's your monitor's Hz
170hz
The GPU spikes higher than that, it will spike 100-150W above the average
Try setting a global frame rate limit at 300 fps
Global, not ingame
AMD settings
That's one way, also on the same control panel screen is frame rate target control
thx
Whoops that was the older version of radeon settings, here's the updated one https://www.amd.com/en/support/kb/faq/dh2-033
Drivers updated, room temp fixed, everything updated... only started happening today
Vulkan fixed.
Ah it's a game issue then. Glad you figured that out.
Okay... so... I put the computer back together... I thought. But now it won't power on at all
And this power supply is brand new... barely used
I got a GameMax GM800
Double check the switch on the power supply is flipped on
I hope you didn’t reuse the cables already in the pc
It is flipped on
Also, I was told it was fine to reuse cables
I also test the power cable on my monitor and it works
not power supply cables
never use power supply cables from an old PSU to a new PSU
if the pinout for any single one is wrong, you could brick everything
or something will be unhappy and cause issues
always use the ones that come with the new PSU
everything else outside the computer itself is totally fine though
oh jesus christ its an F tier
Ahh okay.
it's uh, please replace immediately tier
Trying to remember if that was the one we had that guy replacing his parts like every other week in here
Oh god I hope your system didn’t brick 
We can help you with a good alternative psu if you need help
Well... it should just be the PSU then.... because well. It's not even turning on with everything unplugged from it. I tested first
could also run it by the tier list, but yeah techies will help you with part selection when they can
Okay...
Psu's aren't that cheap rn but you really want one with all the first degree safeties that keep your system safe
Stuff like, ocp, ovp, opp, surge protection, etc etc
those are important
I have a surge protector
An easy way to know what you need is to list your cpu and gpu, we can find one that's hopefully a reasonable price for you
Just one of the many many things a good psu provides tho lol
Surge protector won't do anything with a crappy psu
Gpu?

if you're getting them over the course of a year, I'd reccomend against doing that
Geforce gtx 1070
Ah, cheers
This will work for now
But if you plan on upgrading the GPU you'll need something better
It should be fine then
I would say that gpu is fine for up to something like 3070/6750xt
If you want something very safe I'd recommend this
https://pcpartpicker.com/product/n34BD3/enermax-revolution-df-650-w-80-gold-certified-fully-modular-atx-power-supply-erf650awt
psu*
But gx2 is good enough for those specs
that should be good enough for what you have for now
but revolution DF is definitely a "buy and forget about changing it for years"
Kk
But like I said... with it not plugged into anything in the tower... the PSU is not coming on
Which means... it's gonna half to be replaced.
the fan on PSUs don't always spin when you plug them in
No like.. there's no sound nothing the light on the switch didn't even come on
unless you have a PSU tester there's not much else you can do to test it other than plugging all the bare necessities in it to see if it boots
Imagine if it was doa 💀
It saved you the trouble of dying later
Blessing in disguise lol
Lol i guess so
But okay... new power supply
That... I can handle on my next pay check
Hey i have a 3080 im transferring to another PC when i upgrade to my 4090 what psu should i use for my 3080 ill have a amd ryzen 7700x with the 3080
I'll gx2 you in a minute
What psu do you currently have on it?
850w is enough but you can go 1000w for peace of mind
@fossil cedar the pc im switching to the 4090 has a 1300watt
But im buying a 1000 watt it seems for the pc im building for the 3080
For the 3080 one an 850w is plenty, if you're in the US, Corsair RMe 850w is your best choice
Part List - AMD Ryzen 7 7700X, Corsair 4000D Airflow ATX Mid Tower
So something like this @fossil cedar
I went with 3070 and RM 850
@tiny tusk https://pcpartpicker.com/list/K37LZw I would do this
Part List - AMD Ryzen 7 7700X, Corsair 4000D Airflow ATX Mid Tower
Costs about the same with better cooler and more ssd
If you wanna save just get 1tb version
Alright bet thanks
https://pcpartpicker.com/list/4YvJLs id do this
Part List - AMD Ryzen 7 7700, Phanteks Eclipse G360A ATX Mid Tower
670p same quality as p41 plus
ag620 same as ak20 zero dark for cheaper
same qality psu for less, and just as good mobo for less
quality
i dig the looks of ak more but that's indeed better
What happens if you use used cable extensions
One of these days... I wanna upgrade my case. My old one is bulky and huge.... and orange. I want either white or pink.
Id get katopav's list
Katopav and Patokav so helpful
@paper summit ur letting me down man we gotta team harder
💀

FELIX
What wha
What's happening

is slight buzzing noise from pc normal
Yeah
idk where specifically its coming from
no hdd, and I'm pretty sure the fans are clear
Aio?
like the pump?
Ye
uh could be
Describe the buzzing
uh
uh
Lol
Different sounds?
yeah
it usually comes when I download something
Lol
Coil whine can sometimes be a buzzing
In one sense that's good, it's not buzzing at a stupid high speed
Which can make some terrible noises
Easiest way to check is to like, find something that runs really high fps and listen for it

Mine is so loud in some game menus 💀
A frame cap fixes that
Ehh who needs thattt
Lol
Also the 5900x is running good
How's the mx-6
50w idle tho🗿
I did a cinebench throttle test (at 185w) it doesn't go over 70
At 185? That's quite good
Well duh lol
It just runs??
Man I couldn't get 200 to run on mine
Weird
75 best stable and mine had some good scores lmao
I'm not sure it's actually boosting that high but that's what I set it to
Yeah you'll find it'll clock stretch
Which isn't a bad thing but probably not true 200
I did 23 something in r23 I don't remember exactly
I did your mom
Far get a 5900x
Felix got a bad bin smh
My daily is now an 8750H
Mines bad for ln2 but fine on water
No, I will not be touching Zen 3

Reinstall ur windows on zen 3
stop.
No he's to stubborn
oh also
Rather blame amd

Danny you're as deaf as brutus
Geuss so
when I installed the m.2 ssd, that sticky thing was supposed to stay at the bottom right? cuz I left it there
Ye
You aren't helping by repeating the same thing over and over and ignoring my reasons for not reinstalling right now
I accidentally removed it at first
It's annoying as hell
yez
Ah ur fine then
ok just making sure lol
Anyone have any recommendations for the best budget 144hz monitor for competitive shooters (Valorant)?
What reso
Felix I feel like you're always here helping people lol
You deserve to be paid or something in return man
Sorry market is bad. Theo coin is now .01 per year
😦
Wow it went up
we need to go on strike guys
Why work for theocoin when you can work for Farcoin (you get paid in ddr3 g-die and psc rejects)
I'd work for that. Can't have too much DDR3.
If mounting an AIO in the front; is intake or exhaust optimal? And does top vs front mount matter?
Intake on the front usually
Top is technically better because it's quieter but there's next to no performance difference
Keep in mind radiator placement is also a tradeoff of a few degrees between the CPU and GPU. Having the rad on front gives the GPU slightly pre-warmed air. Having the rad on top gets slightly warmed air through the radiator from the other components.
And do I have the side with tubes at the bottom or top? Every instruction I see says top, but I’ve heard bottom is best
Assuming front mount
Tubes at the bottom is very slightly quieter, but the trick is getting the tubes past the GPU
It's usually easier to do tubes at the top. That's how I have mine.
You just get slightly more gurgling from the liquid
Got some more plants. Once I have a workspace like a proper one setup I will get more and move them all into pots out nicely around my workspace.
1 Euphoria Cactus, 1 Aloe Juvena, and the other one I am not sure what it is.
no stop plz
what is this
who packs forks for shipping
i wonder.....
NO
Not possible

The NO is for no thinking
I love cacti. I want to get some for around my setup as well.
If your cactus doesn't engulf the side of your house you're doing it wrong
lmao.
guys ! , do i3 10105F work fine with RTX 2070 ?
No idea. No one here works for Newegg and as far as I know different items restock at different days and times.
Thanks
Okay babies I bought the parts
Can some one help me on the rgb cables and a hub
To sync my fan with them?
Also can I change the fans on my aio
?
Z73 Kraken?
Hey guys can I put two ssds on this?
MSI MPG Z790 EDGE WIFI LGA 1700 Intel Z790 SATA 6Gb/s DDR5 ATX Motherboard
Yes but just wouldn't get it in the first place
Yes
I want them to match the rest of the fans
No i mean i wouldn't get the kraken in the first place
I watched thing and the guy said the Lian lol infinitys can be attached to a radiator
Y not?
Overpriced and meh performance
I want the custom pics
I wonder if it’s hard to get that
To work
Like can you pick anything…
I bet the program is easy to use
Corsair have a better cheaper one one with an LCD if you really wanted to
It was black
I think you're stuck to gifs and pics
Imo just get an 8" display off Amazon for 80$ and then you can actually see stuff and put anything you want on it but up to you
Here's an example from one of the other users in this server
Here's another
I really like this one so I need 3 cables one for psu one for gpu and and for something else?
This is a set but I think I’m missing some
I’m really new, I’m sorry are there any more cables I can change to rgb?
The cable extensions are that ye i was talking about the screen but ye
I wouldn't buy from a chinese seller tho usually sketch
You'd need at least 2 8 pin pcie ones, depending on gpu, possibly 3
One 24 pin and at least one 8 pin eps
What are those?
Strimers are cable extensions
Okay. Thank you
Np
Okay more question from the Noob
This or
GIM ATX Mid-Tower PC Case White 10 Pre-Installed 120mm RGB Fans Gaming PC Case 2 Tempered Glass Panels Gaming Style Windows Computer & Desktop Case USB 3.0 I/O Port, Water-Cooling Ready https://a.co/d/bA7ZZ9G
Hi, anyone here which one use asus rog strix b650e-e gaming wifi mb? I need to update bios before install CPU/OS or I can do it after OS?
Take a look at o11
You won't need to update bios unless you got a non x or x3d cpu, and then it's a 50/50 on if you do or don't
Try booting the pc without a bios update, if it boots you're good
If it won't turn on, then you have to update bios
Lian-Li O11 Dynamic EVO ATX Mid Tower Tempered Glass Computer Case, White https://a.co/d/erT7ijN
This?
I hate the metal bar in the middle
yeah, and o11d airflow
mesh?
i forget the name of it
that
Air flow is important but I won’t be over clocking or anything
And I learned this time to turn my pc off
Haha
the y60 has good airflow
That’s too much metal
it's just expensivce
Thanks for info, i will use r7 7700x
if you like it, go for it
Nemooo
Which is better full tower or mid tower?
It’s the color of my car and the color I keep my light in my room
In my brain big equals more air flow
nah
i mean, kind of
bigger case is more space for air pressure to be lost
but it depends on the case
but if it's a full tower with a solid front vs a mid tower with a mesh front
the mid tower wins
fan count is good to have more, but it also depends on the design of the case
How many fans
?
That case has only one as shown in that pic
It’s not white interior but red one of my fave colors
How many do you think it would need
With i7
I would just get the o11 mini air myself
depends on what you do and the cooler you're using on the i7
Anyone have a full configuration lian fans + aio? Need to use 2 controller or just one in lian li dynamic? Because this configuration have 5 cable for rgb and controller have just 4 spot. ( 4 from fans and 1 from pump)
I have rtx2070 I didn’t get a new gpu I prioritized aesthetics over gpu
the y60 has good airflow
it has good asthetics while not compromising on performance
I got the kraken
oof
Was it you that said it was a gimmick
no, but it is
I want to change the fans on it
what size did you get and how much was it?
To the Lian li infinity
I'd just throw some p12s/p14s on it
some of the best fans on the market while being some of the cheapest
it also wouldn't improve performance by more than maybe 5c at most, and that's being generous
more likely around 2-3c
$370 holy word I can't say here
My rooms always like 80
and could add a little LCD display in the pc
Can the fans on the kraken be modified?
I believe so
yes
idk why they wouldn't be
you can take em out
im biased but i think ch370 is a great case
for matx that is
it looks decent
it just looks so good to me, but ofc that doesn't fit the aesthetics here
the upside is that it's $60
yes
Wait I missed it what looks good?
Can you show me? Pleas
Oh I get trypophobia
But I love your wolve
I am tying to make one
Where can I just post pics?
Like general?
Would it be possible to make a PC case out of pure wood?
Ye
How would the grounding work and such?
Cause doesn't the metal case function as a ground?
That'd actually be sick
I have carpet on my room so every time I press power button on my PC, I get ESD. Wood button and wood case would fix all my issues
Ive actually been able to turn on my PC with pure ESD before, I bet others here have aswell
Oh yeah I've seen that before. Just touching the button is enough to trigger the power.
Hey guys
I was wondering are there any 4 pin rgb extentions?
The Lian li come with a 24 and 8 but I need a 4 pin, I can’t find it
Is that a thing that exists?
Totally exists
Can you help me find it ?
You can also get splitters in case you need more
Lian Li Strimer Plus V2 24 Pin (PW24-PV2) -Addressable RGB Power Extension Cable (Strimer L-Connect 3.0 Controller Included), PW24-PV2 Black & Strimer Plus V2 8 Pin - Addressable RGB VGA Power Cable https://a.co/d/38728YM
Lian Li Strimer Plus V2 24 Pin (PW24-PV2) -Addressable RGB Power Extension Cable (Strimer L-Connect 3.0 Controller Included) - for Motherboard Connector, PW24-PV2 Black Lian Li Industrial Co., LTD, found in 1983, is the largest and most reputable family-owned and run designers and manufacturer of...
I want these but it’s missing the 4 pin
Micro Connectors 30cm RGB Extension Cable The Micro Connectors RGB extension cable is the perfect accessory which allows users to extend and connect their RGB LED lighting strips or fans between RGB controllers, RGB capable motherboards or just extending space between your lighting or fan enablin...
Yes I might need those
But look
See the one I circled
I want that to have leds…. But I not sure where to look
Btw I’m sorry to who’s pic that is, I keep using it
Maybe there is no option and I just have to settle
Maybe it’s a 8 pin and not a 4
Idk… the more I learn the more confused I get
I’m sorry for being annoying
It's 8 pin yes, often called 4+4 because of where the cable splits
Looks like there's no strimer EPS cable that I can see
@potent portal thank you soo much
Nope that says "VGA" so it's keyed for the GPU power
It physically will not fit the CPU power cable without modifying it.
Okay thank you, I would hate to blow this pc up too
question for yall. could i run two different sets of fans on radiator? One set thats rgb only for looks and one thats higher performance for the actual cooling?
Yes but push pull doesn't really do much
the rgb ones wont be spinning
so theyll just sit and block airflow?
the fans i plan on using are the noctura 3000 rpm 190cfm fans for the actual airflow...
They won't be spinning
But they'll be in the path of the air
So the air will make them rotate
Ergo spinning
ahhh i understand now
Just get an RGB strip
Just get an ls720 and have good rgb fans
It me again guys what you think about this
I think the other case I had picked out looked better but is a bit out dated
GIM ATX Mid-Tower Case White Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready https://a.co/d/dZKCZiC
imo i would prefer the dynamic evo
Lian-Li O11 Dynamic EVO ATX Mid Tower Tempered Glass Computer Case, White https://a.co/d/8QnhKsQ
but to each their own
Yea that one is nice too but I just found this one
Now I might be a dreamer but it say all the parts are removable, which mean I can color it
C U S T O M C O L O R S !
I swear guys I will post a pc someday….. hopefully it comes out okay, okay I can take.
which one is better 550w tuf or pylon
Does anyone know why it takes steam so long to open the first time?
Seems about normal for boot times tbh
My steam takes about the same to boot on both my laptop and desktop
my friends steam boots so much faster and his specs arent as good
I've seen people have boot times of minutes lol
Try checking if youve got a lot of processes running in the background
how would i do that
Follow the three steps to show every task running except Microsoft ones
Post screenshot here
look at this one Phanteks (PH-EC360ATG_DMW02) Eclipse G360A Ultra-fine Performance Mesh, Mid-Tower Gaming case, Tempered Glass, Digital-RGB Lighting, White https://a.co/d/6FtLz6T
i have the p360A which is about the same
good airflow, supports wide gpus
@jagged ember excuse me for being incompetent but i cannot find my screenshots
there is a lot of stuff on there though
I do windows+shift+s then just paste it in discord
Snipping tool handy like that
oh shoot
oh wait
i forgot to hide microsoft services
thats everything @jagged ember
Oh, dear lord
yes
Asus aura, armory crate, a bunch of Asus stuff
i can disable all that?
Yeah, honestly
i thought if i turned it off it would mess up my lights
If you don't mess with your rgb
i dont change it much
no idea what that is
done
Use revouninstaller to remove that stuff
do i have to re-enable it if i ever want to change the lights or will it just reopen when i open the software
oh, you'll need to reinstall it
should be bundled with armory crate though
Hit scan, check everything it shows when it's done scanning and delete it all
Ensures a fully clean uninstall is all
i disabled some chrome things
Yeah armory crate should be what it shows
okay sick
In theory that'll free up more resources and make steam boot faster
If not, you'll still have freed up resources for literally anything else that you do on there
So win-less win
She’s a pretty lady
I see ads for this all the time. I thought it was a scam xD
Glad it worked!
Nah it's actually good lol it looks through your programs folder and registry stuff so you can fully remove it
I'll have to check it out
Can anyone help make this better, im a bit rusty 💀 . I would prefer not to spend any more money than this though. https://pcpartpicker.com/list/nNQTLs
Part List - Intel Core i5-13400F, GeForce RTX 3060 12GB, Phanteks Eclipse G360A ATX Mid Tower
for a gigabyte x570 gaming x motherboard im considering another NVME drive in the pc, but on the spec sheet it shows it has 'dual ultra fast nvme' does it mean it has 2 slots for nvme sticks?
Likely
Some of those Gigabyte boards have two M.2 slots stacked on top of each other, maybe that's what they mean
possibly what I'm thinking, I don't want to open my pc if I have to, but the slow underneath is not a nvme slot lmaoo
so makes sense it could be hatched under my current nvme, tyty
You have 2 slots, which I've circled in red
omg seriously tho, I needed this image, loool tyty
time to impulse buy 2 wd nvme sticks
finally got back on discord after finishing my watercooling mess.
I drilled new holes in the top plate of my case.
Making do with what you've got, not bad at all.
I had to tear the whole case apart to get the top plate off and get the plastic bezels off.
I screwed down the radiator then put the plastic bezels back on over them
I probably would have given up long before I got to the point of drilling
I like my case.
Sheesh if that radiator was 1mm thicker I don't think that would have worked at all
I like those cases with the giant side fans too. It's too bad they fell out of fashion in favor of tempered glass.
Yeah I went to function over fashion. 🙂
It's hard to beat the GPU temps with a fan that size blowing at it
This case even has a fan speed switch
3 levels
You can make it sound like a real blower
I maxxed out at 87 degrees after many cinebench tests.
i5 13600k
That's quite respectable
I could get the i7, but it would just be hotter and right now in benchmarks I don't think it does all that much better.
Yeah there's not really much point at going with the i7 or i9
Especially with the i9 pulling 350W on its own at stock settings...
I am curious what is gonna happen when games actually really start using 8 cores.
This has "14 cores" but only 6 are p
Will be a while, and few do because games are made for the majority of cpus w/ consumers. The Ecores indeed will help more and more VS my 12400 perhaps
E cores are the interesting topic there. From what I've seen they don't really help any more than having a regular core in place of them. They really just boost benchmark scores and all core workloads.
Well take my 10700f chip, 8 cores. This chip smokes is. If they made games more reliant on 8 would my old chip actually perform better?
No, because each core on the newer architecture is capable of doing more work per cycle
who was it that was sayin my 3080 gets to 91c regularly and thermal throttles? also the person sayin the y60 was a bad case for thermal temps overall? cause i'm not havin a single issue on any game i run at all ultra or ultra+ settings. my whole case has never come close to reaching 65c. my gpu has never gone over 66c
just askin cause i've never seen someone more wrong about something so dumb before
If you have a thick GPU the Y60 can be bad for temps with the vertical mount, so I guess your 3080 isn't thick enough to be a problem
i have the ls720 cooling my cpu
That probably helps with the CPU temps then, that's a great cooler
i also have 4 total 140mm fans pushing air onto my gpu and into my case.
yeah it seems to be doing real well but i'm not doing anything particularly cpu intensive either. my cpu have never been above 48c
still need to find time to transfer some other programs over from my laptop so we'll ssee
one thing I thought was odd and I haven't fooled with ARGB before. I have my pump RGB plugged directly into the motherboard and no software is picking it up.
Do you have to use that controller as a gobetween?
I thought if you have a plug on the motherboard you could direct plug it
It's supposed to just work if you plug into the board, unless it's a proprietary plug
No it is normal
idk what motherboard you have. i have one from msi and i have full control over every rgb, argb, fan and pump pin out from the msi center
Gigabyte
Maybe try another header and see what happens, if it still doesn't work it might just be DOA
Well it is lit up, it is just gold
Tried changing LED_C1, didn't do anything
I have it in D_LED1 because it has a missing prong hole like on the board
There's 3 pin and 4 pin RGB, they use similar headers but very different voltage and signaling
If you put a 4 pin RGB onto a 3 pin header it might just kill the RGB
Yeah this one is a 3, would be impossible to plug into the 4m
this is the 240, but it looks the same
Step by step instructions on how install the Cooler Master Masterliquid ML240 Mirror AIO CPU cooler on the AM4 socket using the B550i Gaming Edge WiFi ITX motherboard. RGB effect using the supplied controller are demonstrated at the end of the video. This video is part of a full step by step PC build guide for beginners which can be seen at http...

Can you guy not laugh at me
I want to get this case now and fill it will 13 fans
Idk
It just hits different
I serious I bought all the part but the darn case
It’s a interesting case, white internals could be interesting in it 
And I love fan and the sound of the ……. Maybe that’s y they always burn up
I got white
I need to just do it cause last night I had taken my sleeping meds and I just ordered stuff and now they will be here before the case and I can’t test them.. panic….
Why why.. insomnia
Guys, aio fans need to be connect to CPU_FAN or SYS_FAN?
Mostly white
Cpu
You could connect them to sys wouldn’t really matter but cpu is tied to an aggressive fan curve out the box usually
and rest of fan in sys_fan?
Yup
oky, thanks for info
I am worried how I will connect 5 rgb cables in a controller with only 4 rgb ports. It's a full Lian Li setup and I have 4 cables from the fans and 1 from the pump, do I need a splitter to do 2-to-1?
So there might be a extra rgb header on the motherboard you could use for the extra rgb cable
I don’t know what to tell you otherwise though
I understand, that means i will choose the color from mb, not from Lian Li interface, right?
to have same color on fans and pump
It should be able to recognize the lian li fan from that rgb header
(The software)
Will see, thanks very much ^.^
Np
If Intel can support faster ram doesn't that make Intel better then amd or is there more too it
ddr5 is still not faster than good ddr4
There's more to it
^
Did the lian li fans not come with a daisy chain cable?
Let's go.
4080 or 90?
Rx 4060 xt Ti
Rx 4060 xt Ti Super**
6700xt
Super superclocked kingpin classic
Nice! I didn't realize they had a similar design last gen.
I upgraded from a. 2070 Super Gaming X Trio so I'm happy.
Admittedly the 20 series looked better for vertical mounting IMO
Gaming x 40 series is up there for my favourite designs rn
in the process of me upgrading my nvme i unscrewed the case and took it out very carefully, and the glass just shattered in my hands rip
it was like a scene in a cartoon
I'm sorry for you lost
Your*
same
trustwothy lool
im placing bets, i got this case 2 years ago, what are the chances corsair sends me a new one free
Can't wait to get home and benchmark it. I ran a shadow of the tomb raider max 1080p benchmark while at work ( didn't have access to a 1440p monitor)
I’d try to make sure there is no glass in the pc before u decide to turn it on and I believe Corsair sells replacement glass panels
they do
That's the downside to tempered glass, its goofy
better than having normal glass break and cutting you at least tho
Yeah
Need some help.
Lian li infinity fans. Everything is plugged in. Not getting power to them from any of the plugs on the controller. Exhaust fan has power and on the controller. Any ideas?
Never mind. I got it sorted
sl-inf you a chad
Now to find some 140mm that's actually in stock and I'm set
@little osprey there's nothing wrong with an office chair. a quality office chair is often more comfortable and adjustable than typical "gaming" chairs. don't fall for the marketing and hype
Facts. I got my chair off the side of the road almost 5 years ago and scraped all the cracked fake leather right off the cloth. People really out here spending 700 dollars on a 30 dollar chair.
I need a different office chair, red doesn’t fit my setup
It’s the color
I see. I hope you don't sacrifice comfort for a chair color you won't be looking at a whole lot when you're on your computer
My chair don't match anything lmao. I sit in it and fart in it. It don't gotta look nice
Trust me, I won’t, besides my dad gets a new Herman miller chair this year from his job so I’ll steal his old Herman miller one
It’s 2k 💀
don't fall for the opposite end of the spectrum either. plenty of chairs that are just as comfortable that don't cost ridiculous amounts
yeah but it’s free since he got it for free so I’ll just take it, if not I’ll buy a cheap office chair
if it is a black office chair and comfy that’s all I need
Herman miller gang 
Yes
Quiet and cheap, that's what you need
Probably don't need very many of them too, not a lot of heat. Fill the front intake and call it good.
I'd like rgb but been saving and saving and now that I just need the case and the psu I don't care how it looks

It's just that I found x5 for 24 bucks lol
ARCTIC offers innovative solutions incessantly - changing impossible user requirements into new. Always focused on our customers, ARCTIC is devoted to deliver excellence through a strong dedication and a high sense of commitment. In light of the ever-changing consumer landscapes, we aspire to con...
You could just get a case with fans on it already
So I found the issue
The software that is use to controlled the Radeon graphic cards was over clocking something
Be remark I didn’t make those changes because I know my psu is not capable of handling over clock
But I found it weird that the software itself went on to making the changes.
Like I would think those type of sensitive things stuff would be leave up to the user, and not easily changeable by the software itself.
That was a known issue with the software for a while but it was supposed to be fixed a long time ago
The software took 7 game crashes to fix it
i3 12100F
2060 6gb ASUS dual evo OC
xpg Invader Black
msi b660m pro-a wifi
2x8gb 3200mhz cl16 ddr4
512gb mp33
550w asus tuf bronze
p12 5 pack
thoughts
everything bought bout the psu and the p12/case
Seems like a good entry level build to me. The case isn't exactly high airflow but you don't need that for low heat parts.
do you think I'll have a problem with fans?
I mean it says my board has 4 fan headers
and the case supports up to 8 fans i think
Fan hubs or splitters will work
It should be the PST model that has the daisy chain too. You can put all 5 on the same header.
Archon 2 Mesh RGB Elegant ARGB Mid Tower Case with Powerful Mesh Intakes Archon 2 Mesh RGB sports an attractive and elegant design with three ARGB fans at the front panel. The integrated lighting button allows it to display amazing lighting effects. Powerful airflow, mighty support for up a 360mm radiator, a 315mm graphic card, […]
what about that case
it's cheaper than the invader one
and has mesh
That one's alright
If you're looking for cheap and good there's the MX-330G airflow https://www.newegg.com/p/N82E16811553054
Ah. The cougar is good too then
Yes
nice, so I can use the other 3 fan headers for another 3 extra fans, right?
😵💫
Yes
You've been summend
Get to work
Yes
Yes
sorry to bother again, this is the same pwn p12's right?
I'm worried they're too cheap and might be another model lol
Get the pst version to daisy chain
okay
I think I won't buy the fans from amazon, idk why but the shipping takes 2 months
I can buy them locally a bit pricier but I'll just get three as I won't use all five since the case will have pre installed ones
thanks for the advice tho

instead I'll get the 1tb mp33
Reference the chart in #old-cooling for good ones and ones to avoid at all cost
https://www.facebook.com/marketplace/item/575833491097053/?mibextid=dXMIcH
Good deal? I was thinking of offering 60 and taking 70
Yeah looks good to me
Guys the parts have been purchased please pray for me
pray to the silicon gods
is it still a good idea to buy a ryzen 7 5800x3d im pairing it with an rtx 3080 or maybe a 3090 ifr it become 600 euros or should i spend more money on buying the new 7700x
Next month you will able to buy ryzen 7 7800x3d, i think is better to keep your money and invest into a new platform
5800x3d is a good buy if you're already on AM4
Easy drop in upgrade for any half decent motherboard
What felix said, but if you don't have an am4 board just go 13600k(f) imo
what if I’m on a 3700X?
Def
bett
oh okay
What does it mean when a alienware computer has a orange light and blinks 3 times then stops
4*
what is a good adapter to plug my cpu coolers 5v3pin rgb connecter to my motherboards 12v 4pin rgb header
dont
youre gonna fry your leds
5v and 12v aren't just there as a product marketing ploy
it'd need to convert from 12v to 5v which means no simple cable will do it, easiest way to do it is usually sata powered hub
my friend unplugged his PC because a storm was coming in and every time they lose power the pc will not turn on until they have unplugged the pc and held the power button for 30-60 seconds.
They unplugged it before losing power and when they tried this morning, not a single light or any indication of activity started.
I am not there and a plane trip to Australia is not something im interested in lol.
They are asking me if its the power supply (which was the issue that last time, they just replaced it a few months ago.)
or if it is the motherboard.
There's A-RGB controllers that plug into your USB 2.0 header. Cheaper and easier than a voltage/signal convertor controller.
how bad will my 5800x bottleneck a 6900xt on 1080p for mw2
Probably not at all
The 5800X is great still
Or, well at 1080p it's hard to predict but it'll be upwards of 250 fps probably if you enable PBO
I wish gpus were that cheap when I built my pc lol
Super dumb question but this doesnt look like it fits am i doing it right
There should be a bracket to attach before putting that on
Does that come with the motherboard or nah
The cooler
God damnit i knew i shouldnt have thrown them random metal pieces away from my old motherboard 🤦🏻♂️
I hate building off old stuff
I got my ARGB fixed on my gigabyte board, I had to find some Gigabyte RGB drivers before installing fusion 2.0
now that port is showing up
How much do you guys think my pc is worth after a year?
https://pcpartpicker.com/user/33x/saved/#view=VXLyWZ
Saved Part Lists
Roughly $1000, there's a couple premium parts in there that help it retain value
@tawny fiber perfect example of what I was talking about earlier
$1000?? Damn the prices dropped hella
I paid 2.5k back then :(((
Yep. That memory for example costs $120 NEW now.
The reason is there's a lot of aesthetics and not much actual performance happening in that pc
So like for testing purposes i can boot my PC without a heatsync right? For like 10 seconds
so is everyone on ddr5 now
Yep, or just set it on there without the bracket
DDR4 here
Thx brotha
Still on DDR4 also
I paid $280 for ram LMAO
Early adopter tax in full swing
frrr
Why does my power supply not have a PCIe power connector
Which power supply
is my motherboard any good lol? https://www.newegg.com/gigabyte-z690-aorus-elite-ax/p/N82E16813145366?Item=N82E16813145366
i forgot everything my pc had
Yeah that's a good board
EVGA 650 G3
It should have the PCIe cables
$1000 is unbelievable fr fr
it's a modular psu
Has no slot on the power supply and only has 2 CPU power
get the pcie cables in the box
They're labeled VGA1 and VGA2
I'd argue it was a generous price tbh
ouch
i think i bought my pc at the wrong time
^
lol i got it in newegg shuffle
If you put a 4070Ti in there the pc value would literally double
Why is building a PC so difficult but so easy at the same time
i aint tryna upgrade this pc. i gotta get to class man
Is the psu used?
😂
Just sayin
G3 sounds fairly old
You could flip it for a reasonable return with a better gpu
But just a 3060 in there kills it
it's like plopping a 3090 in
so no point
Fair
i only really use my macbook
That would probably fetch a price you wouldn't want to know 
Ya and it's still kinda worth 500
500 was my estimate fr
Anywa
Just a suggestion
800$ 4070ti, then you could sell pc for like, 2K
Then part out the 3060 and sell that for 250
Nearly 500 more profit
It’s simple yet complicated too
Well its easy to put together but theres too many specifics lol like there needs to be more universal stuff
Talk to pc companies, haha. Much is close to being universal, people just don't use their noodle enough (or rtfm)
its only the 3060 the 12600k is plenty capable
if they put the same 3090 cooler in there the gpu should be hella cool and quiet
About to switch to DDR5 in my case
about 5 years
is the cooler master masterliquid ml240l v2 any good on keeping the new 7000 series cool?
or should i go more expensive and go nh-15
nh d15
Ml240l v2 is good, it'd work for am5
okay then
AM5 gets hot but doesn't transfer heat very well
You could use a single tower cooler on any of them really but you'll see a little bit of improvement with better
okay
okkay then
when the 7700x3d releases
Ah yeah, those LS coolers will be good then
Yeah it is
okay awesome
It's the same as the regular just stripped of a few aesthetics
ah okay, is 6000mhz ddr5 also good for ryzen 7
Ye
But no higher
6000 is almost guaranteed for am5 but not higher
Higher is a total lottery
ah okay
Asrock B650M PG Riptide
Yeah that'll work
okay or should i just go b650 msi pro like you said
Pro I know is good for low end
If it's similar price or cheaper I would go pro
Actually either is fine
Pg riptide is also good, go with whichever is cheaper
Actually no
@karmic mirage don't do pg riptide they have a 75C temperature limit
Sorry
Definitely do the pro instead
75C on the X3D would be a major performance loss 
yep
You can remove the limit but yeah, less hassle with the pro
its 208 euros
That's, not bad actually
i also found a asus prime b650 plus for 200 euros
oh okay
One of the few actually rubbish boards lol
Ds3h is the other I know of that's rubbish
lol okay
btw there also is an micro atx variant of the msi pro 650m a, its like 8 euros cheaper
Eh, if you're going with an atx case I'd spend the 8 euros for more board connectivity
If you are going with matx case then sure, go the matx version
nah im not going matx case tho, the one thing that does suck about all am5 motherboard which i found all have only 4 sata connectos
More pcie slots with atx but only if you think you'll need them
Yeah that's true
I think they're sizing down on sata to phase it out of consumer
You could still fit 80tb of hard drives with 4 sata
yes true im probably gonna go upgrade my hdd to a higher gb count
Let us know closer to the date with a budget so we can help out 💪
yes
Sales change every day so it'll be different by the time 7800x3d hits
true true
and it will be some time before i have everything but im ready rn
should 850 watt be fine for a 3080 and 7800x3d
You already have the 850w?
3080 is around 600 650 euro's 2nd hand1



