#building-and-recc-chat
1 messages · Page 11 of 1
Yea
you have to take gpu out
Click in the pcie lock and remove the screws on the gpu bracket then remove the gpu
And power cables
Remove the power cables then gpu actually
Oh that sounds difficult
thats under the gpu.
It's pretty easy lol
But if you're scared
Tell me the model and brand of your motherboard
it's actually dead simple
I'll see if it has cmos reset jumper
If it does, you can short the pins with a spoon or anything metallic
I feel like poking around with a screw seems more scary than taking the gpu out
but ig to each their own
you really just have to remove one or two screws
unplug the cables
depress the lock fully and pull directly out
again, any video telling you how to remove a gpu is sufficient
sometimes you might need to release the lock with screws on
then remove screws later
and pull gpu out
mm
I used to do that a lot lol, it’s honesty really simple just get a flat head screw driver and put it on the prongs
same steps, basically
but if you're doing that, you can run the risk of dropping the screwdriver
yep
especially with someone new
that probably won't be able to rma too lol
i got lucky with mine cause asus accepted it, thank god
Wdym? Ik it depends on boards where it’s at but there usually on the bottom of the board and honestly real simple to short
doesn't negate
^
dropping the screwdriver?
U would have to be clumsy to drop a screw driver tbh
hey
does everyone have good hand eye coordination?
no
does everyone have steady hands?
not me lol
Brb imma get a pic of some prongs
i’d drop the screwdriver
for this it'd be way safer to just take out the gpu
Bro, unrealistic scenario
uhhh
that's not unrealistic
speak for yourself lol
I've dropped way more things than just screwdrivers
yeah fr lol
laptops, phones, battery banks, everything
I dropped many screws in my case
That’s where u would short it out
oh screws
don't forget screws
those are especially painful on laptops
I dropped my ram sticks too once
i dropped them into the laptop and had to take apart the whole thing to retrieve them
they were fine
I apperciate the help but i just dont wanna break anything

U would need just really basic hand eye coordination to short it
well, you're not breaking anything
if you don't try this, then any other solutions probably won't work
you could just give up and rma
maybe see if someone could call you to guide you on what to do
some problems can be as easy as cmos reset
and rebuild in the hopes you get one that works
but that takes a lot of time
Yeah you got a point
It’s prebuilt tho
He said cyber power iirc
i had a ibuypower and the thing just completely stopped working reset cmos battery nothing worked so i rma
i think prebuilts are built very poorly
depends
it depends on the si tbh
i mean ibuypower lol
ibuypower is bottom barrel
garbage
yeah
It also depends on the person building it
like 11600k on a trash cooler
not too great
and no airflow case
i’m just building my own at this point
honestly i’ve watched about 4 youtube videos and it doesn’t seem to hard lol
lt really isn't
it isn't hard
even if it takes you multiple days
it's kinda like adult lego
doesn't matter, as long as you do it good
and when i have all my parts i’m going to watch a youtube video while doing it
and some things are made so that they only plug in the correct way
don't jam cpu in socket
so i think this guy can take out his gpu
i took my gpu out just fine
and managed to put it back in
on my first time too
took me an hour but
i managed lmao
but i killed my mobo
oh no
lol
thanks, asus
honestly i think the hardest part about building a pc is picking out the parts lol
it got stuck and i kept moving it around
while the gpu bracket was resting on mobo
so that's how i scratched it
but at least they still accept it for an rma

now time to order more parts
who puts locks on their pcie brackets bro
it's not locks
it's like some thin sheet of stamped aluminum
it can get in the way of gpu bracket
cause it can get caught into it
i think i know what you’re talking about
the weird chrome metal piece around the pcie bracket
lolll
the one that goes on top of the bracket bit of the gpu?
it's on the case
it like goes around it
oh yeah I see
it's like a cover
yeah that thing is kinda dumb
like you're not using your pcie brackets as intake
so dust can't be an excuse
Can u change the fans of a z73 non rgb to any other rgb fans you want
yes
Sure
that's what i got the gpu bracket stuck
ok those make sense on a visual basis
Prolly will get a performance boost actually cos nzxt aer's aren't good for what they need to do
I'd have gotten an arctic liquid freezer Ii aio instead of z73
lol
at least i know what to do
after learning that the hard way
asus rma is amazing here
If you guys are saying its easy ill try it then
watch yt tutorials and they'll help you
oh it is
i’m positive you can
just be careful
even then just be careful
but not scared about it tho
yes dont be scared you got this
no fear needed
you can grab the gpu pcb all you have to
it won't short anything
just don't bend it
find him a youtube vid
Linus tech tips shocked himself to prove how hard it is to short something thru static
very very hard
Turn the power off at the back before you take that little battery out
literally ran ridiculous amounts of electricity through his finger to arc to the pcbs
i can brush it and it won't even short
just gotta be a little careful cause the bristles can get stuck on stuff
How do these work can someone explain
It’s just a cable extension with an RGB plug to your motherboard.
Wdym by this?
buying a case for new pc build, any recommendations? I want functionality over aesthetics, was thinkin if just buying another corsair 4000 airflow case
remove plug from the wall
press power button a few times
gotta have a modular PSU and gotta check for compatability if i'm not wrong
then remove circular battery
nope
Liam li Lancool 3
The circular battery is under my gpu i believe i think
Then remove the gpu
g360a pretty nice too
Fully modular and compatible with what
nope? huh i always thought it gotta be modular... unless you connecting the cables to the old cables... in that case you getting alota extra cable
O
nvm im trippin
Rawr
lian li strimmers are extentions
Check tech deals
they just straight leds no?
Pog bundle
not replacements
ARE YOU REALLY GONNA MAKE ME CLICK LINK TO SEE THE PRICE
REEEEEEEEE
Oh wait
Oops
Knew I was forgetting smthn
It's $325
Basically the price of a 2tb p31 and 3600c18 32gb kit
Im super nervous doing this why i dont know
very nais
Another nice deal
The first teamgroup one was better tho
Hynix m ddr5 plus a mid gen 4 2tb
260 or something
Can u cut these in different parts and put them in places and change color wirelessly
eh?
You can control the lights and cut them to fit
Certain strands come with angled adapters as well but I’ve not see many of those
how much should i sell my pc for?
yes
looks like it's worth 450 tops imo
yeah
selling to a friend, 2-3 year old gpu and cpu but everything else was within last year
mighta bought em then but thats not how old they are
Yep that CPU is 5 years old
gpu is from 2017
Alright i still havent started on this can someone walk me through this on a dm?
no storage and ram would bump it down to 400
yh, I'm charging 380
clear instructions were given here
no need for dms
simply scroll up
he spoke up about it a little so now i'm asking, 380 was my estimate
400-450
ty
yh, he's ordering an m.2 and some ram
ima install for him
They not that clear..
These good?
unplug, press the PC's power on button a few times, then remove the circular battery is what he said
Many clear detailed instructions were given
Is this a good deal?
$54 for 32GB of 3200cl16?
Damn nvm
ye
I was going to say
i got baited by it the other day lol
"jesus, 32gb for $54"
https://pcpartpicker.com/user/ProGamersRule/saved/2qgHWZ this a good budget build, I already asked a question like this earlier with a similar build and someone sent a different one, so I kinda combined the two together to make this one. The price difference between this one and the one I got sent is about $9
Budget build 2.5 - Intel Core i3-12100F, GeForce RTX 2060
I’ve already got a case I can use so I didn’t worry about that
PC Builder - Intel Core i3-12100F, Radeon RX 6600
$30 cheaper and better
mp33>p2
gt better psu than ga, and cheaper
6600=2060s
Ok, I originally had that psu in that list but there was a warning it gave me saying there’s a power connector that wasn’t available with it
ignore that, it's a false positive
Ah ok thx
Is this decent? Seems like my 980 pro gannna take a while to arrive so might use this for now
it's fine
Also how to transfer windows then from this to the 980 pro? Format?
but i wouldn't just do something like this, feels like dumping money
Macrium.
Also, if you know you're gonna use it in the future, then I don't see it as dumping money.
Especially if it gets you up and running sooner
I will use it in the future as second storage just need it now to run sooner
Right.
And macrium reflect will clone your ssd to another ssd.
After thay how will windows run from the ssd i want?
Format the drive you don't want to boot from
Like less than half a second faster
Cool
You wouldnt notice the difference
Still rather the 980 is main
Makes sense. Tbh, if you don't have much on your ssd by the time the 980 arrives.. may as well just install fresh windows on it.
Yeah true it should be just couple days
I'm building in an nzxt h510 flow rn and I'm a bit confused on one of the connectors
Its 2x9 pins with an extra one on the side
And theres nowhere it goes
Yep USB 3.0
Nope lol
What motherboard do you have, I'll tell you where it goes
A b460 torpedo
I know where it goes
But theres a problem
My gpu blocks it
Oh nvm
I see
Tu
Tty
Common issue
https://a.co/d/f7Ar5gq
You can get something like that, just make sure it angles the way you need
Nope I got it in
It was to the side I was a bit confused but its in
This goes to the gpu right?
3 pins and an extra 2 pins on the same wire
With the extra 2 hanging off there? Yes
Do all 4 need to go in
If there's 8 holes on the GPU connector yes
If there's 6 then only the 6 go in
Sometimes it helps to put the 2 in first
Yeah I put the 3 in first then realised
Fixed now
What are these for
There are 4 on the same cable
So I dont need to plug that in
You probably don't have anything to plug it into
4x2 pin is cpu right
Usually it's called 4+4 but yes
SATA power
Okay I dont need that either
If you have SATA devices that'll power it, and again some hubs use it
I dont have a sata ssd
This file in the usb flash that came with mobo.. what is it for?
But dont really need it right? I can just download them from internet
To run that iso is even more trouble than help lol
Just finished my build
Started installing windows
And I dont have a hdd
Just a ssd
And it wont let me install windows on it
Any help
@upbeat lake it should install
If it didn’t u must’ve done something wrong installing windows
what do you see
Look up on how to install windows on new pc build on yt
do you already have windows installer on a flash drive?
Reason: Bad word usage
Windows cannot be installed to this disk. The selected disk has an mbr partition table. On efi systems, windows can only be installed to gpt disks
I'm not a tech nerd idk what any of those abbreviations meb
Mean
I think u need to delete some of the partitions
Look ups windows installation guide
I figured it out
I just had to convert it using cl
Weird
Its detecting that it's got an ethernet cable
But not connecting
Any ideas
unplug and replug?
should work with an Ethernet connection without any driver updates
is the other end plugged in?
.
Im guessing drivers didnt work?
#build-pics message should've gone x99 instead 😔
Apparently it doesnt have valid ip configuration
Is it not connecting to your router?
try another cable
@upbeat forum what fans are in the build u sent in build pics
Thank you they look like decent fans
Not the best fans but they're not very expensive and the quality is better than most of the cheap ones
is CL 18 ram better than CL 16 or is it the other way around
Yes.
alright
yes, but atm 3600c16 isn't worth it over 3200c16
a 32gb kit is $60 more
eh, ig if you're getting a 12700 go for it
85$ vs 140$ for 32gb
depends on the cpu
iirc, @bitter mason is running 5000 something
I9 12900k
in gear 1, consistently, 3600
I am at 4000 on my 12600k
Nice
ddr5 sucks rn
ddr4 offers the same perf for far less
compared to trash ddr5
the good ddr5 kits are even more expensive
I'm looking to get a 4000 32gb kit pretty soon
Thats why after 3 years
Actually even thats a waste because need new mobo
Well ballistix max have a 5100mhz xmp kit , could probably oc that and like an 11900k+ +2 dim per channel mem oc board like evga kingpin or something, it would run although in gear 2 if you're talking about booting i think 7000mhz is the record on ddr4
7000 insane
3 years? there are 6000c30 modules these days
😛

6600c32 xmp kits actually
still 6600 could be very hard to run stable on mid range mobos
need some very high end ones
Although the real "value" play for ddr5 is this kit
https://pcpartpicker.com/product/x7xRsY/patriot-viper-black-32-gb-2-x-16-gb-ddr5-6200-cl40-memory-pvv532g620c40k
Guaranteed hynix for 240$
Hynix is ddr5 king atm btw
Teamgroup keeps having that ssd and good ddr5 32gb kit sale, if getting ddr5 I'd just wait for that again
Oh yeah that's a good value deal
and judging from the rumors, am5 is set to launch at september 15th
which seems very solid every day
yeah that deal with the 2tb drive is pretty juicy
but im not 100% on am5 yet to make the purchase
Imo it's a no brainer deal for a nice 6000c32 kit
and getting a raptor lake cpu on ddr5 later anyway
yeah thats a possibility as well
like getting the waifu card and use the 180 gift card to buy the ddr5 combo
so many possibilities
Sheesh
Wasn't it c30?
Oh yeah you right
Yeah, 30-36-36-76
That's pretty nice
Do you know how it compares to 3600c16? Just a general idea
Uhhh
No idea
Yeah sadly
Fair enough
that's affordable.
Yeah if you're buying a 12900ks lel
is there gonna be a 13900ks?
anybody have a good cpu and motherboard a rx 6900 xt?
What
I need a new cpu and motherboard and I am wondering which ones I should get for a build that has a 6900
What is your budget for the entire build and what have you already bought
@boreal notch
What power supply and ram
16 gb and 850 watt
What power supply and what ram. Models.
850 watt can mean anything from a bomb to a great psu
I think I got it from the tier list
Fine psu then
High priority B tier
Good enough for a 6900xt
Now, what is your budget for your upgrade
Including ram
Do you want to oc the cpu
Also what cpu cooler do you have
Will likely need a new one
no
I dont know what this means
PC Builder - Intel Core i7-12700F
oh wait overclock right
Overclock
would it be possible to get a motherboard with a usb-c port?
Can always just use a USB c to a adapter, but @fossil cedar know any b660s with USB c?
Prolly
13850k would be cool
isnt liquid cooling complicated?
13800x would be pog
Not with an aio, custom looping is
But you'd be fine with an ak620 on the 12700f
Front usb c?
Or back?
Lemme see
Yes
Mhm
and that cpu can run every game?
No, it can only run roblox. Yes it can, with ease
You did not link the list
You linked the site
Needa send the one in the yellow box
yeah I changed that
No
Looks good
Do u have a gpu
Yes
Ok ok
What do u have?
6900xt
Would also grab this kit instead
https://pcpartpicker.com/product/dqbTwP/gskill-ripjaws-v-32-gb-2-x-16-gb-ddr4-4000-cl18-memory-f4-4000c18d-32gvk
Why?

Wasn't sips saying it wouldn't run in gear 1?
4000 on 12th gen will yes
non-K cpu has locked SA
i would not count on it at all
in fact, i would stick to 3200 for 32gb on non-K
i'm not sure how guaranteed 3600 dual rank is on locked SA lol
4000 dual rank is almost certainly not happening
I would think 3600 should work too
4000
dual rank
locked SA?
i really don't think so, lol
it's locked to below 1 volt
would I be fine for like a week without the cooler and ram @mossy venture
i have not heard of a single person hitting 4000 gear 1 with a non-k chip
dual rank or not
3800 G1 seems to be the absolute best people are hitting with single rank
Oh i thought it was like .95
even 3600 is not guaranteed
Fair
it's board dependent
Ah
it can be as low as 0.89
but will always below 1 volt
some people are stuck as low as 3400
@boreal notch btw be warned z690 steel legend only has 5 usb A ports
and dual rank is not helping
Fair enough
that's why i say stick to 3200
not really
Could be single rank but eh
it's still
i would wait a week to buy the ram, and hold onto your current ram for that week
Fair
doesn't matter if it's single rank
well I only use 5
just do some research
there are some chips that won't even do 3200 gear 1
a lot of chips won't even post with 3600 xmp gear 1
if you get one of those combos stuck below 0.9v then 3200 is not guaranteed
trust me, i wouldn't recommend 3200 for no reason
gonna be interesting to see what i can do with my new i3
gonna be a big oof if it can't do 3600 single rank
you tried ddr5 ocing yet?
ah right the z690a for $110
may i ask what the incentive is?
free 32gb b-die
oh nice
It might be even longer. but I'll be fine without upgrading my ram for a while?
yes
ok good
you can sell your old parts to get the money though, no?
no, that's not possible lol
you can't make a pc that is incapable of running anything but games
unless you meant
you want to target playability in some specific games
and don't want to spend anything more
yeah I probably should I even have my old gpu lying around
i can help you with used part pricing
ok
what parts you got?
my old gpu is a rx 580, cpu ryzen 5 3600, no clue for motherboard or ram
here is fine
I also have a old psu but someone said it is borderline explosive so I probably wont sell
where do I list it?
try r/hardwareswap or facebook marketplace
Anyone got a parts list thats under $2,000
what country
USA
Do you prefer it cheaper, or do you want to spend around $1750 for the best you can get without buying stupid stuff
Because $1750 gets you a 3080 12gb 12700f build
$1750 would be nice
$1624 for 12700f 3080
nvm oops that's a 3080 10gb
PC Builder - Intel Core i7-12700F, GeForce RTX 3080 12GB LHR, Phanteks Eclipse G360A ATX Mid Tower
$20 more for a 3080 12gb
can use that as a template, you have some budget headroom to customize the looks if you want to
PC Builder - Intel Core i7-12700F, GeForce RTX 3080 12GB LHR, Phanteks Eclipse G360A ATX Mid Tower
Oops
Oh I forgot gf1 was $90
thank you both
Sips list is prolly a better choice, if you want more storage can go for the mp33 pro 2tb (cheaper than non pro by a few $ I believe), or you can always add extra storage later
But the builds are very similar
Oh that's a big oof
4 sticks of ram? Oof
going to move my SSD from my old pc to my new pc, anything i gotta do to prep or smth?
where is a good place to get a windows product key?
Yeah you're gonna wanna reinstall windows
Does G2A do Win10 keys?
saw something about "Hardware independent restore" can i do that?
I used kinguin
Never seen that before but i wouldn't trust it, if you don't do a reinstall it will appear fine until you go to do something and it doesn't work or it's super slow for no other apparent reason
so then how would I reinstall, do i need to use a second storage drive or can I just boot the USB windows installer and it'll reinstall?
or will that wipe the drive?
Usb method, wiping drive is best yes, otherwise you might not clear the files that will cause the errors
so i should just reinstall everything from scratch.... like all 1.5 TB
Well games and other software yes unless you have another drive
I'd just throw any files you wanna keep on some other form of storage like usb the cloud etc
aight ty, any recommended cloning software?
For copying files just use copy paste
Np
kinguin legit?
yh, just make sure you choose the win. version you want, my friend ordered professional and thought it didn't work
yeah i want home lol
Pro is basically same except has a few features any one but enterprise or education will do you perfectly
eh there cheap it’s like 25$ on kinguin lol
yh, he installed home though and tried using a pro key so that was the problem
Probs different seller
ah ah okay
thinking about making a build, can someone tell me if my components check out (idk anything about PCs)
CPU: Intel I7-11700KF
Motherboard: MSI MPG Z690 EDGE WIFI DDR4 LGA 1700 ATX Intel
GPU: GIGABYTE GeForce RTX 3050 (8GB)
Case: To Be Determined
Power Supply: HIVE-850S
Memory: To Be Determined (Most Likely DDR4 32GB)
SSD: SAMSUNG 870 EVO Series 2.5" 2TB SATA III V-NAND Internal Solid State
Optical Drive: None
CPU Fan: Cooler Master Hyper 212 EVO V2
does this check out?
they do not check out
what is your budget
that is false
or else you would get a 12900ks and 3090 ti
im not interested in top specs
im just trying to be reasonable
PC Builder - Intel Core i5-12400F, Radeon RX 6700, Phanteks Eclipse G360A ATX Mid Tower
there you go
these are capable of running games on somewhat decent graphics?
ok cool thanks!
along with making my own, i've also been looking at prebuilts and was interested in this one.
ok thanks
also, whats better for storage, ssd or hard drive?
depends
depends on what youre using it for
do you want speed or capacity
boot drive, ssd
in that respective order
mass storage, hdd
you can use SSD for storage too, but generally hdds are cheaper per gb
as much of both as possible
ok cool thanks
but that'll obviously cost you more
what about cpu cooling? heatsink or water cooling?
which is better in terms of that
depends on the cpu youre getting and what youre doing
for a 12400f, an aio is not needed
i5 12400
...yes
whats an aio?
all in one
ah ok
liquid cooler
and one more question
Haha
im usually a mac user
however
i want to get a windows pc
so
which operating system would you most recommend
ok!
yeah but what one, 10, 10 pro, 11, etc?
you're sure? i've heard it hasn't been that greatly optimized...
11 pro specifically so you have access to more options
yeah when it wasn't optimized
my experience with win11 on laptop has been pretty good
unlike my desktop windows 10 lol
alright, thanks so much! this is my first time building a pc, so im sorry for having so many questions 😅
also glad youre actually listening
thanks!
also idk if i should get an i5 or an i7
what cpu would you recommend?
do you want me to show my build so i you can make an educated suggestion?
I was building my pc and my aio doesn’t fit
oof 😦
Flip it
Unless you need an lga1700 bracket to secure it then you should be able to rotate it so it fits
Oh the radiator side my b
Doesn’t fit in there
Wires?
What case is this?
Musetex?
I think I might just use this until I buy a new one
Yea that
Which cpu??
I5-10400f
Can you show me a full parts list please
I think I might be able to help a bit more here
You definitely don't need an aio for a 10400f
The 12400f is enough for a 3090 ti
It is fine with a 6700
im getting a 3050, so that's perfect!
Try the cpu always sitting at like, 25-30C no matter what you throw at it 
Yes way overkill
So I don’t even need to buy a new cpu cooler?
You probably don't no
But can we see a parts list
The stock cooler will work but it's a bit loud
It's also the older one which is a bit worse than the 12th gen one iirc
How do I send it on phone?
PC Builder
Make a list in there
Then send the link near the top of the page when you're done
PC Builder - Intel Core i5-10400F, Radeon RX 6600 XT
Good psu, overkill
Ram is great but overkill unless you got it cheap
Cooler is overkill
Does the case have a mesh front panel?
Can you take any of these back for a full refund?
No it’s tempered glass
Nope
Ok fair enough
here's the full list
https://newegg.io/d0d6996
Can you flip the radiator on the front so it tucks underneath the wires?
does this list check out?
No
why not?
He meant me
my bad
All good
I would change case then @unique haven unless that case was ridiculously cheap
Like a Fara R1, bitfenix nova mesh (Not many others coming to mind that are cheap and fit a 280
Nvm oos
Deepcool cg560, fara r1, tuf gt301 (meh), p300a mesh
Deepcool matrexx 55 mesh
I bought it for 40 it’s worth 100
And it came with free fans
To clarify, are you just putting the rad in the front or are you trying to fit the fans inside as well?
I already switched to the smaller cooler
I know it was cheap but also it's tempered glass front
If you plan future upgrades, an LFII 280 is nice to have
Or sell the LF2, think about it later, get a $25 gammax v2 tower cooler and call it a day
Yea
That case is gonna be a bottleneck for you though
If you plan on upgrades they need to be low power
Case won't handle anything like a 3070
Or a 5800X for example
Similarly like a 4060 or 7800X
But right now it’s fine
Ok fair
I don’t play high resolution games
You need to sell or return that arctic cooler now
Other than that, the list is actually not bad
Then sell, it'll fetch a good price
It will sell for sure. LF2 is one of the best aio's rn
Dude
Alr first
6600>3050
Let alone 6600xt, 6650xt, and 6700
Or eagle 6600 and yeet it to 6600 XT speeds
strange list

i was under the impression forg already helped you with a list on the 12400f
gorf xD
z690 and ddr5 are a dump of money for the 12400f, and the 3050 is worse than the 6600
yup
Never ever ever ever
i mean
@echo goblet https://pcpartpicker.com/list/DfbV2m
PC Builder - Intel Core i5-12400F, Radeon RX 6700, Phanteks Eclipse G360A ATX Mid Tower
this list was ok
Z690 + 12400, never ever
pretty good
why you changed to a z690 and ddr5?
forg made an outstanding list for you o_O
borg.... zorg
how he came up with those names anyway xD
Grof
yeah grof xD
Please use this instead. 6700XT absolutely destroys a 3050
plus those ddr4 are miles ahead of that 16gb ddr5 kit
alright!
run a diagnostic? (idk about PCs but that's what i do)
No I mean it won’t turn on
Flip the power supply switch off, hold the power button for 10 seconds, then flip it back on. That'll reset it.
The gpu fans don’t move or cpu fans
And case fans
But before that the case fans didn’t work but the cpu and gpu did
So there's no indication anything is happening? No lights?
Take the power button wire off the header and touch the pins together with a screwdriver
My brother doesn’t think it’s that
PHEW
I figured it out
The panel connectors I think they’re called weren’t in the right slots
But I have another question
Do you know why my fans might not be working?
Yep that's pretty common.
How are the fans connected?
what on earth are those proprietary connectors
12V and 5V in the same connector?
is it fusing PWM and ARGB?
I don’t even know
I'm going to guess that it's not connected to power
How is it supposed to be connected to the power?
most likely sata
Oh then yeah it’s connected
I'm assuming there was no manual
2060 strix or sketchy 1070ti with an accelero for this pc?
graphics
and what's the PL?
idk what that is
power limit




