#general-chat
1 messages · Page 378 of 1
It's this one,
https://link.gy/3aa1d
Go get a 240mm thermalright
Beats anything suggested so far
Aqua elite V3 is like $45
@empty rain https://pcpartpicker.com/product/bMyH99/thermalright-frozen-edge-69-cfm-liquid-cpu-cooler-fe240-black
https://pcpartpicker.com/product/qJcgXL/thermalright-frozen-infinity-240-argb-689-cfm-liquid-cpu-cooler-frozen-infinity-240-black
https://pcpartpicker.com/product/TmWJ7P/thermalright-aqua-elite-v3-6617-cfm-liquid-cpu-cooler-aqua-elite-240-white-v3
https://pcpartpicker.com/product/zP88TW/thermalright-frozen-notte-argb-7237-cfm-liquid-cpu-cooler-frozen-notte-240-black-argb
https://pcpartpicker.com/product/ZQBzK8/thermalright-aqua-elite-v3-6617-cfm-liquid-cpu-cooler-aqua-elite-360-black-v3
https://pcpartpicker.com/product/YXFmP6/thermalright-aqua-elite-v3-6617-cfm-liquid-cpu-cooler-aqua-elite-360-white-v3
Pick your favourite they will all perform basically the same on a 5800X3D
whoa, links everywhere
The smal small one?
O
I passed over that one
My b
Don’t let me recommend anything
The suggestions were fine just not ideal
so the previous 2 won't fit?
i mean the stuff you recommended isn't bad at all
theres just so many things out there that "may" be better
I haven't seen your case, but if you can fit a 360 then I don't see why not
These will all be basically the best and also cost the least
Thermalright is >>>>
@mortal grail did you see the news
i sent you the link, i will send it again, https://www.ebuyer.com/2194134-open-box-lenovo-legion-t5-26amr5-gaming-pc-amd-ryzen-7-ebr1-90rc01ahuk?&mkwid=_dc&pcrid=&pkw=&pmt=&utm_term=&utm_campaign=&utm_source=adwords&utm_medium=ppc&hsa_acc=1530083092&hsa_cam=20947882996&hsa_grp=&hsa_ad=&hsa_src=x&hsa_tgt=&hsa_kw=&hsa_mt=&hsa_net=adwords&hsa_ver=3&gad_source=1&gclid=Cj0KCQiAo5u6BhDJARIsAAVoDWuGDlGY2db0qegji9TkBSrvSlNcxKwUWuOJNzggM6TIvmc7Xy5MNNEaAqC9EALw_wcB&gclsrc=aw.ds @mortal grail
Did it come with an aio
Nvm I can see the white paper
It didn't
You could get an air cooler that would work well
PC gamers need to stop winning
lol, it will never stop
man i can never get back to consoles for real
At least?
at the very least yes
Is there an option to pay more? 
yes
Never
i put noctua cooler but it's way too big and because of that i had to take off 2 other RAMs and now i'm struggling with gaming.
Are all the fans in the offerings from thermalright about the same quality?
Way too big like way too tall?
No but not relevant for AM4
Hmm I think a 240mm might fit
So doom is a mass shooter game what is crysis like?
no it fit inside the case but it's wide so it's going over 1 ram slot, i will send a short video of it now if thats ok with you.
custom loop when?
Top tip
Don't bother with any other cooler
Just slide into ggoods dms
mix of stealth, action, and adventure in a sci-fi setting shooter i guess
Woah so its cyberpunk’s grandaddy
LMAO
You can put your rams back on
ye i know for sure 240 will fit but i wasn't sure if a 3 fan cooler will fit or not, i mean length wise.
Can i get the link? Been itching to play smth like cyberpunk
i suggest watching a video or two about crysis (gameplay)https://www.humblebundle.com/games/scifi-shooters?hmb_source=&hmb_medium=product_tile&hmb_campaign=mosaic_section_1_layout_index_1_layout_type_threes_tile_index_2_c_scifishooters_bundle
Thx man
np
There is Stealth in Doom?
When you only have 3 cents in your savings account
lol doubt
you just get in there guns blazing
Oh god
I cant stop it
skill issue
Dang PC games making me lose all that money
Bye
Just what will I do with all this money???
Bye
Anyway that's how I view our clients
😂
Ok bye fr
Live an enriched lifestyle?
Bye
stealth
It is a movement shooter

Metal gear solid aint a stealth game, its a roguelike
i know because i never played
Here it is, i hope it's clear to see the ram that's the cooler is covering. The upload took time.
Do you want the ram to be more visible?
i mean i just wanna be able to put my ram back on, basically if i put my other rams back then this noctua cooler won't fit
thats why i wanted to buy a lequid cooler, that won't take the entire space and i can freely put the rams back on
Yh would need slimmer ram sticks for that
I missed the joke didn’t I
nah thats on me
Or a single tower air cooler or for dual tower i’m pretty sure theres a few that are designed in a way to leave the ram area free
so i was wondering if https://pcpartpicker.com/product/jBrqqs/cooler-master-masterliquid-360l-core-argb-liquid-cpu-cooler-mlw-d36m-a18pz-r1 will fit
on my medium case
Thermalright is transforming into deepcool guys 😭
But at $374 I think I'd get myself an RTX 4060
Over the PS5
@opaque sedge dude why would you get a regular air cooler? get an aio cooler man
Weren’t these taken outside of the US market?
Usually expensive and impractical
tf u mean? aio is way better than a regular air cooler that blows nothing but hot air
If by air cooler you mean the Hyper 212 evo then yes
what does that thing look like?
Air coolers have gotten considerably better since then
me using an AIR COOLER on a 13600k
Thermalright brother
Ur one of us
well they are good
Dual tower?
Also look they’re transforming into deepcool 😭
It is
Ice cold my new case doesn’t have as good as airflow as my old one did so not as good on my end
the same thing happened with my previous case
Sigh
Sponsor: Thermaltake Ceres 500 TG on Amazon - https://geni.us/8An8nn
The Peerless Assassin 120 CPU tower cooler ranges from $35 to $55, depending on which model you get, although it occasionally gets scalped for insane prices that you shouldn't pay. The Assassin 120 at its normal price of $40-$45 establishes itself as one of the best tower coole...
just got something bigger and temps went down quite a bit
Unless you overclock a good air cooler is usually more than sufficient in cooling a cpu
Its fine tbh like the max temp its ever gotten is 85c
And it rarely stays there even in cyberpunk
I managed to exhaust all RAM, VRAM and SWAP at the same time... PC was absolutely not amused
With 50% util
alr
how
a new witcher game is coming out!!!
accidentally loaded 64+ GB of data into graphics memory
ahahaha
Ue5 
Windows straight up died, could not even BSoD
is UE5 the newest engine? kekeke
Can’t wait to drop down to 1080p 60 fps 
Your ram is in the 3 figures right 💀
what no way
no, rn it is 32 GB
It sounds about normal for ue5
it would have been 128 if my mobo didn't die
Newest engine every studio is using on new games and gets horrid performance
I don't think it's the engine it's how they're developing the game
it's like how unity gets a bad rap
Maybe I can pull through 1440 60 in stalker 2
My 4070super is somehow hanging in there 💀
It’s a 4070 super it better 
In some games the 7800xt goes almost head to toe with the 4070super
gud
Hoping it’ll get me thru by the time i start to make an actual living
Unity is a great engine IMO
it is
the company behind it sucks though
(It aint lasting me a decade is it..)
It should
it's just the people who use it that's bad
Gpus last long
Probably the disc-free version
still a good price but just saying
Those gpus were ahead of their time…
Eh
wats a good gpu i can get for $374
1080Ti still having more vram than the 4060 is a crime
It makes sense
1080 ti had it cause it was a halo product
It didnt even need it. It was just a bonus
Its the only decent option from nvidia this gen thats even worth spending money on 600 and under
I mean there is regular 4070 which is okay but below that it’s weird
This gen is like a refresh below the 4070 cards
7700XT
Hello
I was gonna get a pre built for someone I was wondering if skytech was any good or abs is decent?
depends on the specific prebuilt
Can I send links?
yes
Bet one sec
Check this out on @Newegg:ABS Stratos Ruby Gaming PC - Windows 11 - Ryzen 5 7600X - GeForce RTX 4070 - DLSS 3.5 - AI-Powered Performance - 16GB DDR5 5600MHz - 1TB M.2 NVMe SSD - SR7600X4070 https://www.newegg.com/p/N82E16883360531?tpk=1
no
16gb ddr5 
Ok 👍
do you want to know what you can get for this price?
are you in the US?
Yeah
I heard you can get pcs custom built at microcenter
It costs like 200$
Part List - AMD Ryzen 7 7700X, Radeon RX 7900 GRE, Montech XR ATX Mid Tower
same price btw
I'll look into it
there are good prebuilts
this isn't one of them
you're wasting hundreds of dollars for nothing
Antec when
Would want to upgrade the ram
https://pcpartpicker.com/product/qk9wrH/teamgroup-t-create-classic-32-gb-2-x-16-gb-ddr5-5600-cl46-memory-ctccd532g5600hc46dc01
That looks fine, put the other two back in
In fact, you have the wrong 2 slots filled anyway so you want them back in to begin with
Leave the cooler in the configuration that it is, two fans as they are pushing air to the back of the case
No, the fan doesn't need to be over the ram
Oh can you tell me how is it in the wrong slot please
I don't understand the question lol
Oh sorry typo, i corrected it
I see
The two slots you have left empty are in fact the primary slots, the one's you have them in are secondary, if the board follows a standard ram trace layout
It's not really an issue per se, but you do usually get better ram performance using the other two slots
If your Lenovo manuals say otherwise though, don't listen to me
I don't own the motherboard
And that would be highly unusual
But it'd be what it is, just unusual
You're right
As for the cooler, the fan in the front being slapped on the back is basically identical performance, and a good noctua is more than enough for a 5800X3D
The chip is just a hot chip by nature
It just likes to be hot due to the cache layout on the cpu
Did i fit the cooler in the right way?
You fit it a right way yes
Yeah it's hot compared to others
The fans are facing right>left
As long as the fans are both pointed at the back it's correct
It can be upside down and it's still fine (unless you used the offset mount from noctua)
The orientation whether it's right side up or upside down is still the same in real world performance
But yeah looks fine to me
So is there anything i can do to fit my other 2 rams and have this noctua on as well?
That video you sent me
The layout you had there
Just put the 2 rams in
And use that layout
Fans on cooler pointing to back with the air flow
It's got 2 fans on the cooler
Wait
You're thinking it needs 3 aren't you
That's why it's not clear

I forgot one of their coolers had 3
You don't need the 3rd fan
3rd fan makes minimal improvement
are you sure the noctua will fit with the rams? For that i think i have to rake the cooler out first and fit the rams and then put the cooler back on right?
No that's not what I'm thinking
Leave it like this
Then put the ram in
You already fit the one closest to the cooler
No?
Oh wait
man... 😂
ASUSSSSS
no i didn't and thats the real issue i'm having 😄
they really buying shoes in a game
the one very close it as you can see is left empy is because if i put a ram in that slot then the cooler won't fit at all, it touches the ram slot
piccolo stop the build fight, youre gonna crease your jordans
I had it all backwards
I though you had another ram slot to the right of what you have rn
no crease = +50% aim
just bought one on sale
yeah i didn think it will be like this, i know this noctua model for a long time but i never thought i would have this issue with ram, basically i either have to have the ram slot empty or take off noctua and put something smaller 😄
-70%
Ok new plan of action then
Tell me
When did you buy the ram
Was it last 30 days or no
oh no no, i put 2 rams on the right slots, so it's like this, 1=empy 2=ram 3=empty 4=ram, hope that explain things 🙂
Ya I'm on the same page now
no years ago
these 2 are rencent and corsair was few years back
it's cool, i appreciate your effort on helping me out 🙂

i see
It's ok
yeah hang on
But need to know this
Ok yeah send me a pic of the back of the sticks
They'll have something called a "version number"
It'll look like
Ver. #X.XX
You can type it out if you prefer
I'll play ball with this but I think I know it's going to be Samsung something
with a vengeance!!!
3.31, one sec
atlus game mentioned
less than a year i think
Selling both ram kits
oh why is that
Then going off to get a 2x16 kit used
buying Noctua feels like setting money on fire ngl
This is the cheapest outcome for you with the best results
but these are already 16gb each so 32 total and the ones inside the pc are also the same
A 2x16 kit will have no compatibility problems and just straight run more stable
Yes I know
But they don't fit
So selling your 2 2x8 kits at $20 a piece
You can have $40
A used 32gb ddr4 2x16 kit is $30
You make $10
but if i buy another 2 rams then won't they have the same issue where i can't put them in cuz of the cooler stopping it?

No
Cos you'll only have 2 sticks
Not 4
Same ram capacity
Less sticks
With me?
2 sticks is generally more stable than 4 anyways
oh right mine is 8x2
the ones in are the 16x2
Are they?
yeah
32gb should be fine
well mostly the power hungery ones, currently only star citizen and escape from tarkov, but i do play cyberpunk 2077, RDR2, witcher 3 etc
I would just sell the 2x8 corsairs, they'll sell for a decent price too if you put "VERSION 3.31 MICRON B DIE"
Ahhh star citizen
Ok
Valid point
However
Mixing ram is a no go
It usually leads to way too many problems
Hi Felix
To put it in layman terms, the rams are made by different manufacturers
i need ram cuz of SC plus a billion of brower tabs i'm running haha 😄
when i run SC with this many tab i can easily feel my computer struggling
i reinstalled windows with all the latest drivers and updates and still the same
What this means is each motherboard runs different settings for each ram manufacturer
So you end up with this situation
Where settings conflict
The board has to mix settings to make both versions of ram chips work
Which most of the time leads to very unstable windows
Blue screens
Slow fps
Bad experience
would you please suggest the ram i should go for?
wish I could just use old RAM sticks as a crude SSD and put my SWAP on them ngl
I would do a used 2x32gb kit
i barely get any bluescreen
other games i get high fps but with sc i have issue
I would go and shop for a used 2x32gb 3200MHz kit @empty rain
Preferably anything not corsair
That's all you need to know
I'd expect it to cost like...
$80 Max?
That will fix your browser and star citizen issues simultaneously
oh yeah i need to mention this, i don't have the 5800x3d yet 😄 basically i currently have 5700g which is really bad and the 5800x3d i already ordered and on it's way, sorry i should have mentioned this earlier, i just didn't think the convo will be that long 😄
both of the sticks are running at 3600mhz without overclocking
Do you know the name of the motherboard
the ones that are inside and even the ones outside
I believe you but 64gb is hard to run at 3600 which is why I'm saying 3200
Some kits are very touch and go at 3600
3200 is safer
yea asus, it was a ready build PC that i bought with student discount, i didn't build it myself, i found a good student discount so i didn't buy the parts like last time i did.
For a 5800x3d btw going to 3200mhz makes basically 0% fps difference
Can I just check the specific model please
It'll be an asus prime something
I'm thinking b550m
But it'll say it on the motherboard
so if i buy 16x2 @3200 mhz then they will run fine with the ones inside that have 3600mhz? i believe that 3600 will downgrade to 3200mhz to match the other 2 rams right?
oh
but then 3200 aren't as fast as 3600
It's not as stable at 3600 for 64gb is why I'm saying 3200
And again, fps difference is basically 0%
I could give you 5 minutes of bios settings and give you more fps than 3200 vs 3600 would
It's not something to worry about
so when you say not stable, what do you mean by that?
old BIOS moment
sure that would be amazing 🙂
do i have to do the changes in the bios settings?
this user hates his pc, his safety, and house
"Do I have to change BIOS settings in the BIOS?" I mean...
idk how else lol
he couldn't find anything else but a lighter hahaha
W because it's the perfect height
miniature molotov
bruh
its empty maybe XD
haha yeah i know i have to but just double checking 😄
@mortal grail wether or not i buy 4 new slot, i will still have the main issue where i can't physically fit the noctua and the rams right 😂
I have the case and the fans should I take the plastic off now or should I wait till I finish building the computer?
sure thank you 🙂
TBF there aren't really many spark sources in a PC, if any
yeah
I'm just reviewing if your motherboard has the power spec for the 5800x3d
Wait?
Why now?
No time better than the present fr fr
You just might have to clean it later (but you'll have to clean it later regardless)
@empty rain it's a pretty bleh board but it'll handle a 5800x3d looks like
Blue screens, crashing windows, low fps
It's too much capacity for the speed
Speed and amount is a balancing act
Can't have tons of it at the top speed, it's too much stress on the cpu
yeah i was reading as well. thanks a lot for confirming 🙂
i wanted to upgrade my whole pc but instead i thought i would just upgrade cpu and gpu (which i already did) and then wait for better technology and do a full new upgrade.
even for the cpu i'm going for?
Yep
so you're saying 4sticks 16x4 at 3200mhz is much better than my current setup?
CPUs have a memory controller in them. That controller can only drive so much RAM ICs at a given speed
I'm saying 2 sticks at 2x32 at 3200mhz
I have a better pc then you
What's the specs?
don't think that will solve my SC issue
Specs: /dev/null
Well if you're running out of ram then that's the only thing it can be
i will show you now
thats why i need more than 32gb
Yes so 2x32 is the easiest solution
2x16+2x8 as what you planned will introduce issues
What are YOUR thoughts on 2x24
You are position #3 in the queue
this is without SC but with lots of browsers tabs opened, wait for the next screenshot pls
I was just asking your opinion like yea it’s good or i personally don’t like it
People say when there’s more ram Don’t you have to like lower the speeds or something?
That’s what I’ve heard a couple of times
That's what I've been trying to communicate the last 10 minutes in chat yes
Oh well, I wasn’t reading that just was saying something to motor but mainly gaming and some other stuff do you think 24 is good
Oh
I know it’s enough but would x2 16 be faster?
here you go, this is my ram after running SC
Yes so you're maxing out the ram
Too broad of a question
Where's the rest of the build 💀
How should I word it then?
when i had the other 2 ram i was perfectly fine, but until i put noctua i had to take the rams off and i'm having lag issue
that’s my build. It’s better than yours.
Bruh
In the space between nonexistence and reality
2x24 usually runs as fast as 2x16 on ddr5, but on ddr4 2x24 doesn't exist
So you have a capacity issue then
I stand by my suggestion
Oh ok so basically 24 is the middle ground of very good and a good amount of storage
and thats the reason for changing the air cooler into a lequid cooler for more space so i can fit extra slots
2x48 will probably be my set up for DDR5
yep capacity issue and physical space issue which covering the left side slot
Why not 2 64
2x24 is expensive per GB is why I never recommend it
2x32 will not fix the space issue but will fix the ram capacity issue
Ohhh ok I got it on sale that’s why I’m getting it
ye i can do that or i already ordered the moment you suggest me the cooler haha 😄
No 2x24 sale beats 2x16 for value but anyway
Anyone know if amd plans to run am5 for a long time like they did with am4 or they going to switch to more Intel style and change the socket what feels like every 3 months?
You shouldn't mix ram tho
2027+
-Amd
i ordered this one
Dw I get it but it’s just that I forget to close games and stuff and I’m going to do some modeling and things like that so I just wanted a little bit more
yeah
@craggy shoal I have pc soon
Seriously
Ooo good thank you, now just need to plan a cheap am5 build for a girlfriend pc for Christmas/birthday present
@mortal grail I need help Felix pls
Enough extra questions I'm helping @empty rain
Alright I’m going bye guys
you suggested the same one but with 3 fans which i wasn't sure will fit or not but also it wasn't available so found the same one but with 2 fans
Ya so I wouldn't suggest going back to running all your old ram together
I only suggested thermal right ones
And that's when I started asking about the case
yeah i will take your suggestion and get 3200hz ones
Idk man go ask Lisa Su herself because we're not gonna know
You need 32mm clearance for the radiator behind the fans
For the aio
For the arctic you said you bought
47mm
It's extra thicc
hm
here you go this is what you suggest initially
"Let me ask something nobody will know the answer to"
I said at one point the arctic is generally a good suggestion but I specifically said the thermal rights haha
It's all good man
No worries
sorry i got mixed
Luckily with Amazon you can cancel
my bad 😦
so you think it won't fit then?
I suspect it won't no
Normally watching your language is hard but since this is Discord you can literally see it with your eyes.
😅
A cursory glance tells me the space in the case isn't wide enough around the fans
It keeps putting me in the uk pcpartpicker😭
That’s the first thing that pops up for a google search
Even in the US
If you want to, you can still get one of the thermal right aios I suggested
But I would still do the 2x32 kit and only use that kit
Sell the 2x16 and 2x8 after you swap them in
And buy that ram used
So weird
So you'll have 2x32 at the end, it'll be a singular kit
And you should have good compatibility at 3200mhz
I can give you 5 minutes of bios settings, make it faster than a stock 3600 kit
Ez
Windows being Windows ig. It randomly decided my Calendar needed to be in Japanese
But if you see here it looks like there's enough space for it to fit
Yes please
Ah yeah it does kinda look like it fits up top
Not the arctic but the normal ones
Now that we have better video I can say that lol
The arctic is extra thick
But the noctua will come off then there will be so much space
I can picture the case with the new cooler lol
It's ok just cancel the arctic Amazon order
sure thanks 🙂
huh
Pick any thermalright
it looks good, i mean look wise but will cancel it
I'm thinking am5 but am4 would be cheaper, gpu just go with like a 1660 off marketplace for 80 dollars, and same for the case
Thermalright has some nice ones, some similar looking ones too
They perform just as good and cost less
So it's better anyway
You can sell that noctua used for a high price
It's one of those "I don't lose value" type things
It should be pretty close to original price used
Or at least fair
i prefer quieter ones, i don't mind spending a bit of extra money if it gives me a good one
The thermalrights are quiet
Pick the 240mm frozen edge thermalright
It uses the noctua fans you have on your cooler

yeah, but should i keep it as in the next few years i might buy new computer with ddr5 and i won't have to buy a new cooler as this model is future proof?
Thermalright fans TL-B12 are literal noctua A12x25's
The 120mm version of your 140mm cooler fans
Those are what the thermalright frozen edge uses
If you're going to reuse the cooler then don't buy a new cooler
The noctua cooler works for a 5800x3d
It'll have no issues
oh sorry my bad, i was thinking wrong, if i have a lequid cooler then i won't be needing the noctua then i should just sell it
Man I guess we just don't have a general chat anymore
the lequid cooler you're suggesting, will those give more cooling than this noctua i got?
Not really
You are position #2 in the queue, would you like to request a call back?
Please stay on the line for a survey
I WILL NOT BE CALLING BACK!!!1
i'm sorry @craggy shoal
Thank you for choosing new eggs
you can help him, i happy to wait @mortal grail
this guy thinks I'm serious 💀
He's just messing dw
Lol
He's been here like
Years
Bro's a relic
This was a game changer extension
oh lol well this is the first time i'm using Newegg for long time session so im not sure how serious people are here, so i just wanted to stay polite and not upset anyone 😄
In your opinion, what are some of the most demanding games in terms of system requirements like GPU and fps for monitors?
Here's what it'll look like, you'll use the noctua on it, it'll top out 85C
You'll use the thermalright
Or in a perfect world the arctic
83C
Wdym by the for monitors part?
Roblox fr fr
The thermal limit for a 5800X3D
java minecraft with shaders and no other mods
So as long as it's not 89C it's not going to slow down @empty rain
So the thermalright will be better but won't really change anything
so you're saying noctua is much better than thermalright?
Right now, stalker 2
Ugh, that reminds me I need to retest my PC for thermals to make sure the old mobo wasn't doing anything wacky
Cos you already own it yeah
Like saying I was using 100w when my cpu was clocking at below .5ghz 
Tribbles from Star Trek
Stalker, the monkey game I can't remember the name of that nearly got game of the year. And funnily enough star citizen
Cyberpunk 2077
Cpu wise homeworld 3 is the most demanding from what I have seen
DLC and modded
so then the best choice is 32x2? will it be similar price as 16x4?
Yep, and yep
And *2x32 will fit in the board no problem
Just remember to get a used 3200mhz kit
Because CDPR is lazy
That'll ensure you're compatible
Also update your bios before you change cpu
That also
I guess
Will make sure you are compatible
Why use your brain when it's available?
I wish you were in front of the dev team when you said that
Black Myth Wukong
Why keep up with our own engine when there is one that already exists, does most of what we want at the cost of the games being incapable of being played without top tier hardware 
Ok
Star Citizen 🙂
Now that we've put ourselves on the same page is there anything else you're curious about @empty rain
nice
yeah i will look for it
Edited that just so we're clear
2x32
Lol
If you go the aio route you can do 4x16 but it MUST BE all 1 kit
i will update bios too but why before the cpu change? and you said you are gonna give me bios settings or something or did i get you wrong?
focus on game development rather than engine development most likely
Before cos if the bios doesn't know the cpu exists it won't start
It needs the code in bios to know what a 5800x3d is
I will give settings after everything is done
Some easy safe settings that won't really need much testing
Ram has a lot of potential
i like your 2nd sugestion 🙂 now i got 2 things that you gave me to think about, i like it and i appreciate your kind help 🙂
ohhh i didnt know that wow, its good to know 😄
haha yeah you should 😄
real
i will check the prices for 2x32 first and then compare with AIO with 4x16, btw i might have missed it but did you suggest me the lequid cooler already? i know you said "thermalright" but i don't think i got the model of it? @mortal grail
All good
Thermalright frozen edge 240mm
You could also do Thermalright aqua elite V3 240mm
If you want more rgb
I have to buy a usb drive because my Asrock board doesn't have ASUS's handy dandy feature that lets you access your PC's storage in bios to get the update after downloading it 
wegg IT support
this guy
Thank you for holding
Literally just wanted an opinion this whole time lmao
Welcome to Newegg volunteer support
How can I help you today

I mean, don't they literally redirect people here for tech support? That happened once iirc
more than once
way more
Thoughts on a 280mm push-pull config vs a 360mm config? Marginal surface area difference between those two radiators but I was wondering what you would think if the 280mm rad had two sets of fans?
good price but i guess it doesn't have rgbs
Aqua elite V3 has rgbs
It makes cleaning the rad more annoying
All 3 scenarios will be basically the same as long as the aio isn't pulling like 800W through it
Which as you'd know
Impossible
Unless we brought in a xeon spr
Just exploring options for this side build (with the 13700K)
280 is fine
Tho thermalright picks are honestly just the best
No 280mm from them only 240/360
The 240 would do 500W tho
where therm alright when you need em
so when you say 280, is it the length? the ones with 2 fans?
It's the capacity
2x140mm fans basically
Bigger than 240mm, smaller than 360mm
Generally 280 is like 360 in performance
oh ok i can't find any black one with 240 at all
Surprisingly marginal surface area compared to 360mm though
Try frozen notte 240mm
no 2nd page either
I wonder what Thermalright's profit margins are like
Pick one you like they're basically all good aios
Only the "infinity" one is a bit lower performance
i read the review on this one, ppl were saying it's loud and harder to fit
Not loud
Harder to fit for itx
Notte is one of the most acclaimed aios on the market
They're basically all the same thermalright aio except for different RGB and slight fan changes
Underneath they're otherwise identical
Thermalright aios can run loud at max fan speed but you never need to run them that high
Especially not on 5800x3d
It will be barely better at half fan vs full
i like this ones design more, the part that fits on the cpu, it looks cool 🙂
Oh yeah. Pairing an ROG Strix with a Prime motherboard 💀
https://pcpartpicker.com/product/fTPQzy/asus-rog-strix-lc-ii-280-argb-1023-cfm-liquid-cpu-cooler-rog-strix-lc-ii-280-argb
I hope you already own this
I don't lol
Knowledge before purchasing. That's what I do. That's why I asked. If I didn't ask, you'd see me either suffering or genuinely surprised loll
Why you buying
Side build
I have a whole 13700K that's not in use. Going to stick my 6800 XT in it until 5000-series finally releases
i actually ordered it but then i cancelled it right before coming here to ask question haha 😄
It's worse than the aios Kaizokuo has been looking at for double the price
I wonder if I need a new power supply for a 5090
Oh I wasn't serious lol. I'm not going with an Asus
Oh alr
yeah i knew it thats why i cancelled it
I want white for sure though
Hey there's no way of me knowing that
Lol
Understandable
why is it bad though?
I'd probably get this give my budget
https://pcpartpicker.com/product/ywJp99/arctic-liquid-freezer-iii-280-a-rgb-699-cfm-liquid-cpu-cooler-acfre00151a
Performs worse for more money
Terrible on 13700k
Ah you think?
Why though lol
Mandatory contact frame design
It's a bad design
ew yikes
It’s like you’re breaking your motherboard’s pcb when you screw it in
The design is weird
You need to literally cut off the arctic mount to make the arctic lf3 good on intel
And use a custom mount
And then it's only "good"
bruh
It doesn't win
oh yeah i forgot to ask another very important question, i think i got 500W power supply (i used to remember, now i can't check it without opening the other side of the case, is that enough for 5800x3d? i got 3070ti gpu and running 2 monitor 1st 1440p 144hz 2nd 1080p 240hz @mortal grail
Instead the bargain bin lads at thermalright are off winning with the EK shills
Probably this then
https://pcpartpicker.com/product/J7n9TW/thermaltake-th280-v2-argb-sync-8432-cfm-liquid-cpu-cooler-cl-w377-pl14sw-a
This is definitely a gpu
bruh what
Have you ever seen this brand
Pog another rebranded 580
Yeah sure I've heard of that guy "Mllse" before yeah sure thing 💀
yeah okay 💀
I love amazon listings
shall i just order this then? @mortal grail
damn we got chill before DirectX 13
Phone died soz
We still don't have DirectX 13
oh it's ok np
You want a better psu than a basic 500W
sure i can get it but i have to wait a while so will it run for now?
@craggy shoal @misty sparrow https://www.aliexpress.com/item/1005006127133692.html
ANIME GPU ANIME GPU
No idea
I would say it's sketchy
Most prebuilt psus are pretty basic
The GF3 however is on a great sale and would definitely work
And fit upgrades
don't send me this garbage ever again wtf
mf pinged me just to send me some anime
goober
not just any anime, anime waman
and what about this? @mortal grail
PSU before cooler
If I wanted anime on my pc I would opt for a display to change it from time to time
But that cooler is fine ye
Colourful things usually don't age well

i will try to find it at amazon as it's convenient for me
I’m replacing my new PCs fans asap
btw could you please let me know the bios settings you were talking about? @mortal grail
Anime in the middle
Can't until the ram's in the system
oh ok i see
The ram will train the default numbers up, without knowing defaults, I can't give proper suggestions that actually give increased performance
ok i understand
is this the same one you suggested? i couldn't find the 750w in amazon, instead this one came on top while searching for the one you suggested. @mortal grail
It's not the same price on amazon
I can try find a similar priced good one on amazon
But no promises
CORSAIR RM750x Series fully modular power supplies with EPS12V connectors are built with the highest quality components to deliver 80 PLUS Gold efficient power to your PC. RM750x PSUs use only Japanese 105°C capacitors, for long life and reliability backed by a ten-year warranty. A 135mm magnetic...
There you go
sure no problem
@mortal grail what cpu fan should I replace it with
it's from USA, not sure how long it will take and if prime will cover it, but i'm checking rn
There's only one other choice there
will 750w be future proof, lets say i wanna upgrade in the next few years when the new gpu comes out with ddr 5?
Future proof is not a concept
Future proof doesn't exist
Tomorrow every pc part could use a new random standard and nothing works
Future proof is as the industry determines itself
But these are quality units with long warranties and good safety spec
but it's just a PSU which doesn't change as much
That's all I can say
PSUs are way more than just power
They're a whole array of safety features that protect the pc
Like for example
If you insert a pc part that the psu can't handle
It won't blow up
It'll just turn off
Good quality units use safe standards
And simply put you are trying to run a 120W CPU with a 300W GPU in a 500W psu system
There's no real power left for anything else
You need power for storage
RGB
Fans
Motherboard
Ram
yeah i understand all this tbh
but the reason i asked "future proof" is not because i didn't trust the PSU 😄 but the main is was if 750w wasn't enough for the new nvidia GPU then instead of 750W i was gonna get a higher Wattage, thats the main reason i asked that 😄
so that way if the new rtx need more wattage then i wouldnt have to ugrade the 750w once again
but its fine as they're not that expensive i will get the 750w you suggested
It'll be enough for a entry level 4090
With the 5800X3D
So use that info as you will, if that helps
And I say that with the *
*Provided you don't jam like 300 rgb lights into the pc or run 100 usb
@mortal grail thoughts? I decided that a 360mm radiator would work in my case anyways
https://pcpartpicker.com/list/ZfHKBq
Part List - Intel Core i7-13700K, Radeon RX 6800 XT, Corsair 3500X ATX Mid Tower
Corsair won the award for worst quality cases this year
Wait my bad I have like two AIOs on that build
no no i don't have that too many rgb haha i barely have any, i like rgb but simple not too flashy.
and for the PSU from the US ones they'll charge global delivery cost so i'm gonna find the exact ones in UK,
An aio for the aio
That was the 6500x in specific
bett there
https://pcpartpicker.com/list/cMc7Wc
Part List - Intel Core i7-13700K, Radeon RX 6800 XT, Corsair 3500X ATX Mid Tower
damb nvm about the case then
I wonder how bloated macos is compared to windows
surely with the apple ecosystem it'd be a lot better than win11
Not as bloated at all
honestly apple's looking more and more appealing these days
I recently got a MacBook just for the longevity. I'm tired of having laptops die out on me
M3
Base model M3 (so, 8GB and 256GB)
actually got it for my gf in the case I get a 16GB/512GB version though for Christmas
I used to dislike apple a lot more because they were just bad value
Well you use the cpu not the box
me when 8gb is no longer 16gb
nowadays they're making a lot more sense with the M chips and just a better os experience in general
what about this one? i think it's the same one as the one you said, i like MSI so if this the right one then i prefer going for this one 🙂
and this one isn't available i just checked
That one's fine
Or
MSI MAG A750GL PCIE5. Total power: 750 W, AC input voltage: 100 - 240 V, AC input frequency: 47 - 63 Hz. Motherboard power connector: 20+4 pin ATX, Motherboard power cable length: 60 cm, Cabling type: Modular. Purpose: PC, Power supply unit (PSU) form factor: ATX, 80 PLUS certification: 80 PLUS G...
The 750 version
why is platinum so expensive compared to gold
expensive to make things more efficient especially on 120v
because it's platinum and not gold
also yeah platinum metal is much more expensive per weight than gold



