#general-chat
1 messages · Page 242 of 1
:0
You can check the connection in the phone box outside your house and also the stats in the Modem
May you Enlighten me?
You're looking for connection information like SNR and DB
From the modem itself
Do you know how to log in to your modem via IP address?
There's so many macro keys
Can't imagine reaching that far for a tiny little button
Wait is it a volume roller or what’s the name
I can't see the Signal strength of the DSL side.
Seriously though, i don't like where the volume knob is at, it's also tiny
It's why I went Red Dragon instead of KeyChron
Fair take imo. Though they do have one of the better outcomes in the industry (probably because they make so much)
If you log into the modem via it's IP address, there should be somewhere to see Signal Strength, etc
Oh, alright. lemme just log in rq
"6dB or below SNR is bad, you will experience no sync, or intermittent sync problems
7dB-10dB is fair but does not leave much room for variation in conditions
11dB-20dB is good with little or no sync problems (if no large variation)
20dB-28dB is excellent
29dB or above is outstanding"
i'm meanwhile still thinking where i see that
Omg @craggy shoal LOOK https://a.co/d/culpLXS
This is better and it comes in white
https://www.keychron.com/products/keychron-k8-pro-qmk-via-wireless-mechanical-keyboard?variant=40515862200409
Keychron K8 Pro QMK/VIA Wireless Mechanical Keyboard. Supports out-of-the-box QMK/VIA. Wireless or Wired. Hot swap every switch in a breeze with the hot-swappable feature. Compatible with Mac, Windows, iOS, Android, Linux. Keychron Gateron G Pro Mechanical Switches. Connect up to 3 devices. 15+ RGB Backlight
There should be a Connection area in the modem home page
Or Status
What modem is it
No volume thing
Linear Mechanical-Feel Switch
Worse than your first option
What’s that mean?
It's not mechanical
Telekom Smart 4
So I should get the first?
the image:
Oh, you're in Germany?
"mechanical feel" means it's a faked mechanical keyboard (it's a membrane keyboard with a mechanical feel. not the same at all)
Of course, Why would be the Internet so terrible then?
it's Germany, So that is why it is so bad. Because there it is just a Hell
I would take any main brand mechanical keyboard any day over a "mechanical feel" keyboard
Ohhh
i bet better internet than Germany
Is this good it’s what I have neow https://a.co/d/6XXVLHj
I had an older version of this and I enjoyed every bit of it
I highly recommend
This modem requires a phone app to check it?
Or can you connect via ip address like 192.168.0.1
Yeah I agree 60% is tiny
Idk how to use volume, F keys, arrow, delete
Anything just letters
i'm not even gonna think of doing that, Tried it and then by Accident sent a Email to my mother
I think it was an iOS or MacOS only thing on those Royal Kludge keyboards
btw keychron does have a 75% with knob with practically white
https://www.keychron.com/products/lemokey-p1-qmk-via-custom-gaming-keyboard?variant=41003103027289
Lemokey P1 and its Pro version are 75% layout QMK/VIA custom gaming keyboards. Packed with many pro-grade features of a lightning-fast 1000 Hz polling rate, CNC machined body, knob design, gasket structure, upgraded acoustic foam, and Cherry PBT keycaps, the Lemokey P1 is ready to take you to dominate the game.
Ik it’s with that stupid FN key but I hate it
Lemme look at it in a sec
You probably wouldn't have that issue with the one you linked though. It has VIA support so you can change that yourself
I’ve mapped navigation keys on my 60% with VIA lol
It’s just very expensive and I wanted rgb so I’ll consider this but still look
all i see on "Internet"
I had to do like FN + Enter or something
To get access to some stuff
imma go through ALL the pages now
What about Status?
the $130 is wireless, the $110 is not wireless, all should have rgb
oh, it's probably under System Tab
I’ll look rq
Yes
oh what the hell man ._.
Status-information:
System?
Good
I'm still reading through the manual...in German lol
all backlit
Ok, super stupid question. Anybody else ever deal with half of their RAM just randomly disappearing
I know its RANDOM ACCESS memory, but I would like to be able to reliably access it 
There are settings:
Still reading, hang on
Wait I googled if one pc can run multiple computers so I could have my friends play on a monitor while I use one and we both play a different game with one pc?
Yeah, i needed a Hot second on checking data that i don't send stuff that i don't send sensitive data
I might get plain white key caps on my 60%
I mean
yeah..?
Is it hard?
It gets super technical but it's possible
What I’m trying to say is run 2 different computers basically with one
That’s a Linus Tech Tips project
I may see what I can do but idk if it will be like laggy or something
Had to whip out this gem
https://youtu.be/LuJYMCbIbPk?si=UGdNSL9Wvk3otZ9w
Ever thought to yourself - My computer is so powerful that it could conceivably run TWO copies of this game.. How would I do that? Well, here's the answer, friends!
Component List and Discussion: http://linustechtips.com/main/topic/465735-2-gamers-1-cpu-virtualized-gaming-build-log/
Support us: http://linustechtips.com/main/topic/75969-support...
I wouldn't even bother. Just get another PC lol
Thx
vintageRacer79, I'm meanwhile also looking through the System reports
Scanned through pretty much every section in the manual and don't see anywhere to get the Attentuation or SNR stats. Usually, frequent DSL dropouts are due to High SNR, poor attenuation or too far from the DSLAM for your connection speed. Can be caused by poor connection in the phone wire connection box, poor quality phone cable and a few other things. Might have to contact your ISP to see if they can provide SNR/Attenuation numbers or check your phone line connections.
weird thing is that it is only Since today
either system Mem or VRAM
Might just be the ISP getting DDOS'd or something
But guess what i also did today
Happened to me a couple days ago with Comcast
If you have another phone jack in the house, could also try moving the modem to that and trying it
It's goofy here too. You can pay for a gig down and you only get 600Mbps (via Ethernet)
Xfinity moment
okay, i can't move the Router
Xfinity moment, where the lower speed package is more expensive
tf what? 😂
The 300mbps plan is more expensive than the 500mbps plan
And the 1000mbps plan is slightly cheaper than the 800
How!?
Still, Like how is it Cheaper?
Some people have been stuck on 7Mbps (since like the 2010s) not realizing that they can now get at least 100Mbps for the same price
Maybe they just want to standardize speeds across their network by incentivizing certain speeds, I dunno
ISP pricing is black magic to me
Hold on, that is one of the issues:
(R006-2) DSL no longer responds (successful DSL synchronization was lost). The loss of Internet connection could be caused by the use of powerline adapters.
Oh F*ck
We have a Powerline Adapter
But not for me
For that li'l s###t
Yes, my mother got that and didn't think about the Consequences.
Yeah, PowerLine adapters don't always work great
However
It should only be a problem if the DSL line is on a powerline adapter
Yeah, I can't tell her How to operate her stuff. and only today the stuff started
If it's just Ethernet Powerline connecting a device to the modem, it shouldn't interfere
This is between the modem and the ISP
no, the DSL is directly to the Wall
Then it's not PowerLine, or shouldn't be
Still, it is used for that:
PS: The Powerline Adapter doesn't even get past 60Mbit/s
Download
Yeah, I highly doubt that's the issue
This is somewhere on the phone line itself
Or the ISP
Actually, i went on the Site that SPCIFICALLY has a powerline devices site
YES, it has that for some stupid reason
Finally translated:
Like even the site says that.
H
Well right but if it's on the Ethernet side, it shouldn't interfere with the DSL side
Unplug it and test I guess but if the PowerLine has been there a while and you're only having issues today, I'd say it's not the problem
I'm Confusion because of that.
Ethernet = PC to PC or PC to Router connection, Ethernet cable
DSL = Phone Line to Modem connection
Idk what that Bobcat miner is
And that uses the Powerline Adapter is used for rn
Right
Yes
i also don't know How it would affect that
I'm reading
So I assume there's one of those PowerLine adapters right next to the modem?
To connect to the Bobcat?
Yuuup, it is RIGHT next to the router nearby the DSL
until the attic of the house
So learned something new today, PowerLine adapters use the same frequency as the DSL line does. Which means, that little brick could be causing your issues after all
Even though separate circuits
Funny thing is it only now caused issues
Everything works until it doesn't.........
I'm as taken off guard as you are
How long is the phone line from the wall to the modem, is it short?
i honestly don't know... i didn't install that
I can look rq
Two options: Wrap the phone line in aluminum foil to block the interference. OR, get a Shielded cable with RJ11 connectors to replace the phone line
i look rq
I know you're in Germany but something like this is what you're looking for https://www.amazon.com/C2G-28721-High-Speed-Internet-Meters/dp/B000083JZ0
The High-Speed Internet Modem Cable from Cables To Go provides for the fastest internet connection possible. Ordinary, "included in the box" phone cables often use low-quality materials with little or no shielding, which can result in poor performance. The High-Speed Internet Modem Cable connects...
i'd say Around 2 Meters
Yeah... Small issue is that this has the Wrong plug
Will help block the PowerLine interference
Let me see what Germany uses
You have this?
Yeah
For the modem and wall side?
Only wall side
that one: .
As far i'm aware
We have to plug it in the Middle port like that (ignore the router)
I think that one isn't bad:
It's not shielded
This is the only one I can find that mentions shielding https://www.amazon.de/-/en/ip-kwgav-01/dp/B09HKW6LVG
COXBOX DSL cable with galvanic signature for IP-based DSL connection. Compatibility – our TAE DSL/VDSL cable for all standard routers with an RJ45 DSL socket such as The following brands: FritzBox 7590 7583 7582 7581 7580 7570 7560 7530 7530ax 7520 7490 7430 7412 7390 7369 7360 7362SL 7362SL 733....
Thanks a lot for helping 🙏
Welcome!
I'm gonna suggest a better cable
Or move the PowerLine adapter further away from the modem
Like, use a different wall outlet and get a longer Ethernet cable
Right, i can Do that.
But i need to first think where
But that is easier
Powerline adapters are a unholy thing
It is but may not fully solve the problem. It will probably help a least a little bit
RIP
Doesn't seem shielded since there's no sign of any place where the shielding if existent could be bonded to ground, and the TAE connection standard also doesn't appear to have any contact for that either
Don't necessarily need a ground to block RF
Just need to reflect the radio signal, which an aluminum wrapper does
Try it, wrap your WiFi antenna in tin foil
Signal blocked along with interference
Error 404: No antennas found
Hmm, unsure, idk about the physics about it, but I find that ungrounded shielded patch cables tend to perform worse that unshielded cables
no... i was dead serious
I was talking to igetmen 😉
AC power frequencyt is different from DSL frequency
For AC interference, you should have a ground
i can't just wrap the Router
Because the WiFi Signal is gonna be just Garbage then. PLUS: Heat
Wrap the phone line
Ah
idk what i'm supposed to say when they discover that.
The main issue with AC power lines and phone cable is the EMF field AC lines put out, not RF
I'm not supposed to mess with the Router
Remember when theojoe did fake tech tips LMFAO and had like CDs taped on a patch cable to increase network speeds
Yeah
It was the same when I was kid though too lol
If I could, i would literally get my Own router 🤦♂️
And I would literally keep it LAN only
What are you doing with it
The Router of my Family or if I could get my own one?
Also thrift shops often have old ish routers laying on the tech shelf
The lan only one
Meant to say what would you do with it
Wrong tense
If i had a Router, i would if possible not use the WiFi part
And if i needed a WiFi connection, i can just turn on the WiFi for the Occasion
To do what? You have a local storage? You gonna use it for wireless VR?
No. All i mean is that i would just turn off the WiFi part
Huh
I say it one more time: If i could get my own Router, I would Turn off the WIFI
They mean they want their own INternet connection
the WIRELESS internet
But they said lan only
Why do they want an airgapped network
I'm not explaining again, i was at the point of Spoonfeeding spoons that spoonfeed spoons
HOW in the world did newegg get so bad that i willingly leave
Have a good time
No one here is from Newegg, just a heads up
Go join oldegg, I’m sure they’ll treat you better

Bye have a great time :D
Is what they're trying to say is that they want to have a internet connection of their own?
Or do they want a private airgapped network
I tried to explain
They want their own internet connection
No WiFi, hardwired only
Gotta remember, they are from Germany so some funny language/term stuff
Just get a GL.iNet router
Just host your own intranet within an intranet 💀
It’s gotta be a coincidence that we’re talking about routers and Ethernet right as I was about to plan out something related to that
Ethernet a pain unless your house is already wired for it. WiFi is the way
I would like to do Ethernet from one room to another though
I wish MOCA was cheaper
That’s what I’m thinking about
Get some Ethernet cables and go into heavy duty stuff
Geez, how much bandwidth y'all need??
No that's not what I'm talking about, MOCA (multimédia over coax alliance) adapters use the existing (or new) coaxial cables used for cable tv in the house in order to connect 2 (or more, up to iirc 16) locations together
I do want to run wire in my house though so I can setup AP's outdoors and around the house, as well as IP cameras
Was wondering why Steam showed offline, it's maintenance Tuesday -_-
Lmao
WiFi IP cameras, I have 6 all connected on my 2.4G network to my PC for monitoring
Every week it happens and I forget for a second as well
Yeah I know that’s not what you were talking about
I was talking about an idea that I had
when ur trying to fool a robot
I can mog you. Gen z lingo is cringe
Anyone know where I could buy the Razer viper 3 pro dongle? 😭
just ate a bag of Carolina Reaper flavored cheese puffs
tastiest cheese puffs ever
How many calories
probably too many
L
430 for the bag
Herr's?
You cant just put super spicy pepper based flavoring on a product and expect me not to eat it
yes
Herr's does good cheese puffs
it was less hot than it was just plain tasty
dollar store had em so I said why not lol
I really like their Jalapeño and their Stubb's ones
The Stubb's chips are garbage tho
ghost pepper sauce also tastes good to me. Makes people I know cry in the presence of it lol.
aMOGUS
i swear half the "ghost pepper" products is just a scam, like they arent even that hot
like wow ghost pepper chicken frys from burger king, i sure hope these are actually spicy
mid af
not a scam as they do in fact contain flavoring of them. It is just heavily diluted, but you still get the taste of the pepper.
i want a taste of the heat
then bite into an actual pepper lol
i dont want to taste the pepper, why would i want the pepper taste, thats just lame
i think the "hottest" stuff ive dealt with was the atomic wings off of wingstop
which was decently hot, but nothing to cry about
most of the really spicy stuff gets pulled from the market from what I have seen
One of my favorite burgers used ghost pepper sauce and fried jalapenos and it was sooo good, but sadly was discontinued
should get the hotsauce from hot ones, then i can taste the heat
Oop
Most i can do is habanero
Ghost would murder me
I mean, if I wanted to just drink liquid heat I'd just buy concentrated capsaicin. I want hot sauce to be hot but also taste good and not like I am eating pure iron
exactly
i dont want to die, i just want to experience the heat, in a reasonable way
always been a sorta bucket list thing for me
I have reeses cup as the final thing on my bucket list
I don't have a bucket list. I just exist
I barely have one
That may be my chronic depression speaking tho so 🤷
Just a good idea of what id like in life
Felt
Me likey keycaps
what
Feels good man
Is a RX 580 build for $150 sound like a decent cost?
32GB DDR4
Waiting on the rest of the specs
Isn’t there latency with wireless keyboards
There is some, but depending on the keyboard it can be practically not noticeable
Oh ok
If it's Bluetooth and only polling at 90hz, it's going to feel worse than 1000hz with a 2.4ghz dongle
Alongside whatever latency either would have from transmission itself
Most of Reddit will downvote you when you say this in text form
That’s also backwards lol
Wait
Shut up. It's not. I’m an idiot
8 bits per byte
Just had a dumbrain moment
do I get a 3060ti or 4060
Okay yeah Windows just go ahead and restart. Not like you're a server or anything
I'm gonna repost this in a few other servers
Hob
You know you're getting old when you sign up for something and it asks for your birth year, only you have to scroll down to your year because you're that old
The first is 20-30% better
Bro probably never gonna respond
Bro snuck "JBOD" in there
Oh wait that's a RAID controller
Thought it was a BluRay drive
Looks exactly like a 5" disk drive size LMAO
Hilarious when there's nothing for scale
🫠
You know you’re old when your Steam account shows it has 17+ years on it yet you still need to verify your age when clicking on mature rated games
💀💀
Well you could have had it before you were born smh
Making my account before I’m born?
Hmmmm good idea
no one will know because microscopes aren’t powerful enough to see an embryo on a pc
oh wait
never mind lmao
Sabrent rocket 100w cable arrived with new 65w charger
the tests were interesting
anker 60w normal cable with the store bought charger gives me Fast Charge speeds at under 20 W
and used sabrant and an 100w supplied cable on store bought, gave me Super Fast speeds charge.
🫠

damn what went wrong with it
stuff like this is why i dont buy a 3d printer
This is rare on this printer. It's really just a bad file. There were people in the comments saying they edited the file to make it more printable
ah i see
It's only stressful if you get a Creality lol. Don't know what you're doing? Get a Bambu Lab
xD
I never disable Shin Megami Tensei SMT.
Hello mostly beautiful people
mostly?
Yeah..one person here said they were ugly. Smh
holy carp
gura reference in official fnaf game
Deeply
15 seconds · Clipped by Awesome Stuff · Original video "FNAF Into The Pit Is Hiding SECRETS! | Five Nights At Freddy's" by GTLive
gura reference in EDF6
damn
Been wondering about this. Interesting.
good evening fellas
i'm working on a new build and it's turning on but stuck on the page before bios that's like "new cpu installed fTPM corrupted" or something and then when i hit Delete to go to bios it stalls with the "entering setup" message
what's the move
i'm tempted to hit Y but we have yet to install windows or anything so idk how that would work
What does y say?
Thanks steve
I hit Y all the time
press Y, clem --- update bios, then enable Expo/xmp so ram goes to it's rated speed. If mobo is AM5, use expo is it's there, and a thing called ram training might make 1st few bootups slow.
"I’m tempted to do the less scary option" yeah do that one
Hey, what would a good AMD cpu be for a Amd 6600 xt
😏
Literally anything
Would a 5600x be preferred?
I said anything
what about a a8-5500
5600 non X would be my personal minimum. $100ish sometimes, but a good bit better than 5600g/5500
pulls up in Pentium III
best I can do is Pentium Tree fiddy
What do you own and what is the budget for what you don't
I got it settled. Thanks tho
Maybe
there aint no way lol
Neither they’re both garbage 💀
why you gotta be a hater
They’re both not good lol
Benchmarks say a lot
Actually, one has bad value. The other just isn't good whatsoever
who do you think wins, deafkid?
ignoring price value, 4060 has slight edge doesnt it
Yeah I think
2050 
you can get a 6600xt for like less than 200
hmmm
i was referring to brand-new prices though
$180
so if comparing price, 6600 xt is probably better value. But in head to head fight as the pic suggest, 4060 win errytiem
and i've seen people shell out much more for a smaller bump before
I havent been keeping track of hardwares in months. good to know
me either really lmao
Use code EMU50 to get 50% OFF your first Factor box plus 20% off your next month at https://bit.ly/4aKoaGf! Thanks Factor for sponsoring this video!
Patient JL by Xi Chen, Physician by Dr Zhengyu Lin, Physician by Dr Shiwei Zhao, Physician by Dr Shaun Zhang. Patient in room by Jason Whang. Guy sleeping on couch in the background that you kinda...
even juice not safe XD
i mean
you gotta keep the body balanced
too much or too little of anything is harmful
thats why we running life on hardcore difficulty
My baby brother is richer then me he’s 5
Little late but thanks to everyone who told me to hit Y it worked
that's pretty sad
:(
y'all ever just build a computer with no manual?
built out of adrenaline rush
the one who kicking the rush is u potentionally breaking it xD
fixed the flash bang:
motor's favorite meal
Back with some more DiRT Rally 2.0 gameplay and this time we're pushing Petter Solberg's VW Polo R Supercar to the limits through the stormy forests of Wales. It's a real challenge trying to tame this 600BHP beast in the wet conditions, but also a lot of fun!
In case you didn't know, this run using the WRX car was possible thanks to the ACAT (A...
dirt rally truly is the dark souls of racing games
get your money up not your funny up
exactly
Yo can anyone help me change my boot to ssd instead of hdd
Buy SSD, copy HDD to SSD, install SSD, win
Kinda loud but I love this video https://youtube.com/shorts/NuW0DLKVS2c?si=JzJYEoAGbo5sSrrK
hope you enjoyed watching these incredible clips!
⮯ More Info Below ⮯
FOLLOW ME HERE:
► TWITCH: https://www.twitch.tv/dantes
► TWITTER: https://www.twitter.com/doaenel
► INSTAGRAM: https://www.instagram.com/doaenel
Business inquiries: doaenel@spectrumgmt.com
Editor: https://twitter.com/imapeuu
#dantes #dantesttv #doaenel #leagueoflegends #t...
I did
What did you use to copy it? needs to be bit for bit
Hdd takes priority and my bios doesnt allow me to switch it
aomei backupper version 6.3
Custom with an omen bios
Did you use the System Backup function or Clone function?
clone
Omg that’s soo cool wish i actually had skills
Yea
explosion
Well I think the ssd is too small for that and I dont have the tools to do so
Are you trying to boot from a USB port?
is the ssd a sata 2.5"?
is it a large rectangle
It's fine, is it a stick like this
or a small long boy rectangle
Yes
Ah
small long boy rectangle it is
What PC is this exactly? What did the motherboard come out of?
And is the NVME drive in an enclosure you connect with USB?
never thought hot pursuit would be this smooth lols
HP Omen PC though?
Yea
just gotta practice
Your PC like this?
No enclosure
mm
Yea I guess so
yes it is like that
If no enclosure, how did you copy your HDD to it?
You said you couldn't get it in the slot?
I might just not understand
so the mobo must have an nvme slot or else it couldn't be copied
A pretty close call in the Subaru Impreza... Like and Subscribe for more rally content :)
SO the stick drive, you said you copied your HDD to it, how did you do that? You said earlier you couldn't put the stick drive in because no tools or too small?
I think everyones confused on my situation
Lil bit, yes
Im using the ssd right now as speak
Ok
But lets say I get off right now
Next time I get on my pc it will auto load me with my hdd
Ah
oh gotcha
Gotcha
alright so this is my friend he used to have a trash prebuilt but a mutual friend of ours gave him parts from various prebuilts and they built this new pc and he kept his original hard drive from his trash prebuilt but just installed a new ssd stick into his pc but the only issue is that when he boots his pc it prioritizes his hard drive until he boots up bios and changes it so it starts super slowly until he can change it then it becomes a normal fast speed
Making me go into my bios and sswitch to ssd everytime
general steps are set to boot from ssd permanently and probably format the HDD
SO even if you go to Boot Options, Boot order, and set the NVME, it still defaults to the HDD?
Probs because the HDD has the boot key and not the NVME
I actually tried googling the omen bios one time and it didnt look like mine
The BIOS controls communication between system devices such as the disk drive, display, and keyboard. It also stores configuration information, such as information for peripheral types, the startup sequence, and extended memory amounts. Each BIOS version is customized based on the computer hardware configuration, and includes a built-in setup ut...
I dont even know where to find boot order I just go to boot menu
It doesnt look like that
Nah it doesnt look like that either its way bigger if that makes sense
Is there a sticker on the back with a serial number?
you pinged me for this?
Sorry
Or on the side?
I just like talking to you but I don’t want to waste your time
yes
Need the serial number please
So I can go to HP site and get a manual to see what we're dealing with
2MO2212M3P
Lawd, none of the manuals have BIOS -_-
What happens if you unplug the HDD Sata cable and boot?
Which cable is the hdd sata cable
I'll have to find out and get back to you
Let me know. If it boots to the SSD with the HDD unplugged, wipe the HDD
This is SATA power
Make sure you save files you want from your HDD before you wipe it
unplug either
(And not with a cloth)
They've already cloned it to the SSD 😉
Did I bother you?
nah
Huh actually that's a good point
Ok that’s good
Yeah I drink that stuff raw
what 💀
Raw
With another word combined
Booted perfectly
But I haven't just drank pure milk for a while
I love it
Time to wipe the hdd
Now how to I wipe it
Should just be able to use the disk management tool
You gotta have the HDD plugged in first tho
Or it won't detect it
can I just plug it in while my computers running
Bet this discord is a W
Once you're in Windows just search for disk management
Right Click on the HDD, choose format, give it a name, choose NTFS and check quick format
alright
Make sure you have "Enable file and folder compression" unchecked
Label is the name
thanks
We are gaming
Props to them for doing all the demonstrations live! It's just that AI doesn't like it when you demonstrate it live. I mean it did great most of the time but yeah. See the full presentation here: https://www.youtube.com/live/jvyyfvf0gjI
28:48
1:08:42
should i get a ryzen 5800x or i7 13th gen\
have you seen what's happening to intel 13/14th gen?
I'm trying to help them in build chat
(Or 7800X3D)
real
I've seen worse
That doesn't make it good lmao
imagine it was a 4050
For a grand you can definitely do 7800X3D and maybe like a 7900XT
but muh ray tracing
I’m gonna trace your rays
ayo pause
Next@Acer 2024 on September 4th Acer has set a date for its annual Next@ event. The event is not limited to PC hardware; on the contrary, it will cover a wide range of technologies and devices, including smart devices, multimedia, and more. However, it is a fact that the 2023 event was 90% focused on […]
weird marketing by acer..
human intelligence
Me dumb, human intelligence fake
gm
whats your average joe's pc
probably no gpu thing
Switch 2 release slipping from Q1 to Q2 2025 According to new reports, Nintendo won’t launch its highly anticipated gaming handheld before April. There has been no update on the Switch 2 for weeks now, at least nothing that could be considered major news. As we await details on Nintendo’s new console, the rumored launch […]
Make you wait longer than AC GREEN
Wonder why they're so tight lipped and protective of any leaks
I got a bad feeling it's not a good reason
it'll be worth the wait
I sure hope so
and they don't release a second gen handheld console weaker than a toaster
(because they absolutely could do that and people would still buy them)
A California jury has awarded MR Technologie of Germany $262 million in patent infringement damages in a jury trial against Western Digital. MR Technologie (MRT) sued Western Digital in August 2022 saying it used IP patented by Dieter Suess, U.S. Patent Nos. 9,928,864 and 11,138,997, titled “Multilayer exchange spring recording media.” Patent 9,...
6am. Time to go to bed
200$ on tax and delivery jesus
should i still buy it
1,223.160762942779$
for Core i7-13700F 2.10 GHz GeForce RTX 4060 Ti 16GB DDR5 2 TB PCIe SSD Windows 11 Pro Codex R 13NUD-064US
hi
oof
that's some taxes
yanno
maybe you should sell your crypto and get money
and buy local parts
i can help you find some
@rapid fulcrum
hm
binance p2p?
you'll get lower value but
p2p lets you sell crypto for money to a merchant
then they pay you back in said money
that's assuming you're at legal age to register on binance
i use binance p2p all the time with my online hustles
is 7800XT is better than 4060 ti
yes
by a big margin
and it'll shoot up in frames compared to 4060ti
amd preference plus faster gpu
oh
again i can help you make the best build
can you
crypto just limits things to newegg
the pc ppl here found me had a 200$ fee
or you cut your losses and get a 4060 rig
which in itself still will give you a good experience
yeah
But that's cause shipping and taxes are dumb
up to you
Skytech Archangel Gaming PC Desktop INTEL Core i5 12400F 2.5 GHz, NVIDIA RTX 4060, 1TB NVME SSD, 16GB DDR4 RAM 3200, 600W GOLD PSU, 11AC Wi-Fi, Windows 11 Home 64-bit
should i buy this for 1000$
it's a good rig, just kinda ruined by the taxes
wasn't there the refurbished 4060 msi?
it has ddr5
Wow you guys are still at it?
yep
you lose 10-20% perf without ddr5
Youch
idk what that means i gotta start learning
cpu performance
I sure am glad I don't live in the UAE
Shipping seems like a nightmare
12400f is slower than 13400f already
yea but its shipping from the USA
Even with our own 27% VAT it's not this bad
we got stores here i js got crypto
true
That's also because 12th gen only runs ddr4
msi isn't exactly good with prebuilts but it'll be ok
I'm def gonna build my next rig without a shop being involved
12th gen runs ddr5 too
But yeah if the 13600f or whatever it was isn't affected by the degradation
prebuilts just never use ddr5 with 12400f
That way at least I get actually what I want to
Huuuh really?
ya lol
I did not know this
@elfin mural is there any Z790 DDR4 boards actually?
no
I'm curious what the diff would be on a high-end Intel chip
a prime d4 is understandable
Z790 tho
is MSI Gaming Desktop Intel Core i5-13400F 2.50 GHz GeForce RTX 4060 16GB DDR5 1 TB PCIe SSD Windows 11 Home CODEX R 13NUC5-071US for 935$ food
good
oh rlly
perfect
YO
hi
ASUS Prime series is expertly engineered to unleash the full potential of AMD and Intel processors. Boasting a robust power design, comprehensive cooling solutions and intelligent tuning options, Prime series motherboards provide daily users and DIY PC builders a range of performance tuning options via intuitive software and firmware features.
The ROG Strix Z790-A Gaming WiFi D4 supercharges builds with a robust 16-stage power solution, bountiful connectivity, and smart performance. It features four M.2 slots with heatsinks, a PCIe® 5.0 x16 slot, USB 3.2 Gen 2x2 support, WiFi 6E, AI Overclocking, AI Cooling II, AI Networking, Two-Way AI Noise Cancelation, and Aura Sync RGB lighting.
$310 on amazon
purely insane
;/
Wtf
If it was ddr5 it's a little better
finally made up my mind and money
CPU: Intel Core i7-13700F
Video Card: GeForce RTX 4060
Memory: 32GB DDR5
Storage: 1TB SSD
Operation System: Windows 11 Pro
3,270.99Dh
890.56$
kinda confused
hopefully the i7 arrives instead 😈
You cropped it too much lol
the option is 13700f
0u\h
I wonder if the title would be more accurate or the specs/details would be
lads you’re not supposed to eat the apples to keep them away
put an apple on the end of a stick to ward them off
like a spear
So like a rapier?
Yes
Or you could just do the SpongeBob thing and stand inside a circle made of apples
2004 Hyundai Sonata moment
still a good looking car
My car***
I know it’s your car, remember when we were talking about it a few weeks ago
I’m trying to fix my mouse
It’s a pain
what is wrong with it
You’re starting after you fix your mouse, right?

no front license plate?
just noticed that out of all the times you've sent that photo lol
Well the right mouse button has a double click issue
Your options:
- Hot swappable? (It probably isn't). Get new switches and swap them
- Not hot swappable? Solder new switches onto it
- Get a new mouse
Opened the mouse up, got to the little button component thingy and opened it up
There’s this incredibly tiny copper plate that is responsible for making the clicking work, and apparently the double click issue is caused by it being bent too far so I’m trying to put it back in right now
Double clicking is the reason why I now look for mice that are hot swappable or has optical switches
Can't stand mice that still have double-clicking issues
or just spray electrical contact cleaner in it and press the switch a bunch of times to hopefully dislodge dust/debris
Hi
my walmart mouse had double click issues when i came back from college after not using the mouse for like months, so it got a bit oxidized i would assume, so i was getting ready to replace it
and then this thing decided to fix itself
after clicking a bunch of times
💀
now i have to go back to waiting for this mouse to die before replacing it
HOW THE HELL IS IT SO DURABLE IT WAS 17 DOLLARS CANADIAN
IVE BEEN USING THIS MOUSE FOR OVER HALF A DECADE
I feel like I'm taking a risk by getting this Logitech G502 X because my G502 Hero had double-click issues 6 months into using it
The name brands are using switches from an old Logitech mouse but it needs 5V, the new mice are undervolting it which causes it to double click sooner
Found that from Reddit
Voltage has no bearing on mechanical switches nor optical switches. It cannot make them click sooner or later, the click is a physical connection in the switch.
I could see undervolting it causing it to not register a quick click but even then, seems weird
💀
If the actuation point of the switch is is 1.8v, electronically speaking via the micro controller, and the switch is ran at 3.3v instead of 5v, then it'll be more susceptible to voltage drop from poor internal switch contact (from dirt or oxidization).
no, ususally the switches are either some high quality like switches from japan, or some bottom of the barrel clones that dont last
Actuation points =/= voltage
Idk any of the real numbers btw, just made random numbers up for example
I'm reading
The micro controller's input has an actuation point that afaik is usually defined by voltage
Not by amperage or wattage
The controller does, not the switch itself
Yes, and that is my point. If the switch gets dirty, the max voltage that the switch can pass is lowered
Eh, it's not just that though, the other caveat is humidity
"but after a few months/years in a reasonably humid environment, the oxide layer that builds up is too thick for the circuit to actually register that the switch has been pressed, and the switch bounces."
Sweaty palm gamers create the humidity
Take apart mouse, install dessicant pack, problem should go away lol
Seriously
Dessicant would be dead from standard non-gamer humidity in less than a week
Ya, would require frequent changes
But it is a combination of low wetting current and humidity, very interesting
I never factored in the humidity from your hand causing the oxidation
Also can be the switch's susceptibleness to humidity
So these mice that have fans in them might be on to something
PA requires back
Yeah but the plate cover is on the front lol
Yeah, that’s a custom cover
The plate I got from the BioWare store included the cover
Sponsor: Hyte Y70 Case on Amazon https://geni.us/p2lWP
The AMD R9 9950X (R9) CPU's release date is August 15, 2024, and this review and benchmark tests the new CPU vs. the R9 7950X, the R7 7800X3D, the R7 9700X, and more. Intel comparisons include the 14900K and 14700K, and we hope to soon evaluate Intel's new microcode. The R9 9950X will be joi...
my brother has a mac laptop and there was smoke coming out of it and now it wont turn on lol
is it just a rip for that thing or is there anything that can be done
no theres nothing that can be done lmfao
you can open it for inspection but i dont recommend turning it on
Send it to Louis Rossman group for inspection and possible repair https://rossmanngroup.com/
What the heck was he doing on it 👁️👄👁️
Is that no rt?
its with RT
Damn what gpu again?
7800 XT
What settings do u play on?
I would be lucky to get 30 fps with rt high
On my 7900xt
there's a mod that optimizes rt further
video now starts to work some other graphics progress
and i was using that when making the screenshot lolz
for what reason
all raster, 1440p maxed out - No RT/Upscaling
no
am having a very weird issue with my laptop
that
randomly
it just gives off a black screen
audio also stops
its not just the screen
when i restart the laptop
laptop moment
Are the speakers in the screen side or keyboard side
how old is it and when is the last time the heatsink was cleaned
i never clean this piece of junk
the best i did is
remove the dust from the fan with a screw driver
which was today
when i restart the laptop
the power button lights up
then the keyboard leds
(its lenovo)
like normal
but
usually the screen starts before the keyboard leds turn off
cuz i have them as off
but it doesn't
i need to hold the power button to shut it down
then give the pc a good shake f or it to restart properly
Are you sure the screen is dead and it's not just the backlights not working??
but today it got worse
am sure that the issue is nto the screen
when the issues starts
any audio playing shuts down
am using a headset i don't even use the speakers
curently
what i've discovered is that
it works normally when
actually lemme do a quick illustration

