#general-chat
1 messages ยท Page 118 of 1
D5's are worth repairing if you can repair it
Save a good hundred to couple hundred
getting new impellers though is practically impossible.
You never know
I guess it's my background, I'm very much a "Make what I have last" kinda guy lol
Not afraid to snipe something cheaper if it's perfectly functional used
so am I, and I wish I could just simply swap the impeller instead of replacing the entire freaking pump.
If I didn't want/need the 450 for another project I'd steal the impeller.
The CORSAIR Hydro X Series XD5 RGB Pump/Reservoir Combo is a water cooling system for computers. It features a D5 PWM pump and a 330ml reservoir. The RGB lighting adds a touch of style to the system. The brand is Corsair.NO MOUNTING HARDWARE

$45 and you get a whole pump at that
Can nick the impeller from there if you need looks
I don't trust EBAY unless I need something for the parts... I don't trust corsair though either...
especially their D5 pumps.
Could check how similar this looks to yours
They're both d5 so odds are it's compatible
Wait no that's not the impeller alone
Nvm
the Impeller for the strongs are slightly different...
It looked like one until I saw the "rotor" part and saw all this extra stuff behind it lol
I have the 12/24 volt pumps
I been a newegg customer for years, I went through the Bitwit and Paul Era too ๐
Lots of other pumps here but they're all over 50
You could swap the pump out the housing entirely potentially
I need a different housing for the pump really
Depends how it connects up, if it has a res on top
Etc
Most I'm seeing with reservoirs are over 100 tho if you don't include the corsair ones
The one that failed is the second pump I bought 2 years ago, The other XSPC came from a build that was supposed to go to a friend/Customer.
It doesn't have a warranty?
2 years seems like it'd be in warranty
These things are normally expected to run for 7+
I could ask Titanrig, however I think it only has a 1 year
or 2 and either way I'm pretty much bent.
Xspc has a disclaimer at the bottom for 1 year
That seems hilariously short for a pump tho
I'm not about to pay another 160.00 for two brand new Koolance pumps
If you're there then you know my rig ๐
I see like 1000 rigs a week
I have no memory of even the pc's I saw yesterday

right, however I'm the only one I know of on Watercooling that has a TT Core WP100 LOL
with the same name minus the 01 ๐
aliexpress or taobao might have D5 impellers
I've looked ๐ฆ
I don't have time to wait weeks for a freaking impeller though.
My rig is sitting at uncomfortable temps at times for me.
define uncomfortable
You still have one D5
lol
That's more than a lot of DDC users 
45-60c Idle for me

Phanteks D5 Gen3 PWM high performance pump is ideal for PC water cooling. The D5 Gen3 pump features PWM speed control via motherboard or dedicated fan controller that allows for automatic pump speed regulation.ย High-Performance D5 Gen3 PWM Motor water pumpย Automatic pump speed regulation depending on your CPU tempera
That's what my AM5 cpu is sitting at rn
And I'm not on D5 so goes to show lol
yeah.... There's an issue with my cooling period right now.
THe phanteks isn't SATA though
I don't want to install a damn molex
it's sata
well yeah d5's are very old
especially the old genuine liangs
I think, apart from that corsair article, the cheapest seems to be the phanteks new
the corsair one would be good, you're covered by ebay protection, which basically always honors the buyer
even if the buyer destroys the item
If I lived in the US I'd be buying that myself rn
Corsair is expensive af but their watercooling stuff is quite competent
I don't simp for it
Problem is I don't trust corsair pumps and most of their LCS gear. that includes their AIO's
oh
I should correct myself
Their custom watercooling is competent
their aios are garbage
they've managed to make their aios twice as expensive and twice as bad at cooling in the last 4 years
their AIO's are complete trash and their pumps from what I've read have taken a major hit in Reliability ๐ฆ
this includes their D5's ๐ฆ
The air cooler costs $42
that new aio of theirs costs
$600 ๐
I wonder if I still have the graphs of this
I don't keep up with Corsair anyways as far as their cooling goes.
I mean, $45 and you see how you go is how I see it
That's a really good price for a D5
I can't comment on their d5 reliability, but if it is a real D5, it should last a while
remember TPU has become very intel biased over the last 8 years.
I take most stuff from TPU with a grain of salt unless it's been contributed by a known independant. like Gamers Nexus.
Same with toms, they're getting better though. Tom's been intel shilling for at least 15 years though.
There aren't any other major outlets that have reviewed this though
Also intel shilling or not they're on the same cpu

I'll give you that LOL
So yeah I really don't shill for corsair
Only their psus are good these days
Their psus set a golden standard for years tho
Now that Ryzen has been around for a few years Tom and a few of the other intel heavy places are coming around.
But that D5 seems really cheap
You'd probably like this
tl;dr Intel cpus are dying at stock settings due to mismanaged bios settings both used and endorsed by intel for over half a decade
The fix is to limit the crap out of them, so big dive in their performance
I don't really Shill for AMD, however I've been an AMD user for many years, mostly because of what intel did and has been doing to AMD.
I don't blame you tbh
I had both a terrible and great time with AM4
though AM5, after I figured out my AGESA drama, has been solid
AM5 is a really nice platform
I've had mostly amazing times with AM4 I had one bad memory controller on a 2700x that popped.
it's only shortcoming was the boards that came out initially were grossly expensive
that's a thing of the past tho
My experience with Asus prime on AM4 was horrendously buggy, but my time on gigabyte AM4 was excellent
It's a mixed bag for everyone
Some people have had no problems
Most people I met have had at least one big issue on AM4 tho
Just got some coffee and it tastes so good
AM5 on the other hand, seems to be way better
AM4's only issue for me was a pain in the rear cooler mounting
It's like AGESA is finally starting to work out, just as AMD announced it's transition to open source
๐
Socket SP3 however... smoothest socket I've ever used in terms of ease of assembly
Isn't threadripper as equally sketch with some things tho
Like i/o you guys def have the usb disconnect problem
Firmware yeah... hardware not really
I never had that
Yeah hardware is usually pretty good
fair enough
I do know people that did tho
Most notable was J2C
I got lucky ig
I had it on my prime board, never had it on my Aero board tho
SP3 is one of the craziest socket designs I've ever seen in person though ngl
Fella walks into the doctors office, he's the first one there, he's got a hot cup of joe in his hands, Doc comes out joking where's mine? Tells him to come on back. Doc does all the usual things then says to the patient, turn your head to the left and cough, he does, then says turn your head to the right and cough, so he does. Patient says, What was that for? That was my Cough fee. LUL
Threadripper do be kinda crazy tho
4,000+ connections is insane
waiting for when consumer becomes that many
You see we have epyc AM5 now?
wait... whut?
I found UBM is actually good for something... albeit not much... it seems to do ok for memory bandwidth benchmarking
EPYC 4004 CPUs spotted on sale in the USA A seller from California has briefly listed AMDโs yet unreleased EPYC 4004 series of CPUs for the AM5 socket.ย AMD is about to launch AM5-based EPYC server processors, and there is now evidence that this is indeed happening. As we reported 3 days ago, AMD has [โฆ]
yep
I want to see if they have upped cpu lane counts
That would be actually really useful
They're not always accurate with that stuff.
Also, I will definitely want to get another board with BMC/IPMI
That is actually super handy for many reasons
They have real pictures tho
It's definitely a developing thing
AMD makes some epyc CPUs
epyc that can game on the side?
Having small scale epyc deployment options is really cool
that'd be epyc
but I want to see it with upped cpu lane counts
thats what Threadripper is basically
it's half pointless without more cpu lanes
x670e and epyc i guess
I'll take this with a grain of salt and rumor only...
x670e
128 PCIe lanes is also just mind blowing
maybe x770e might expand upon it
ooooo
also rumors with real pics are fairly true
That might be a thing yeah
They bring out a server version with increased lane physical wiring and full ECC?
Hey
What is better For 1080p
Rtx 3060 12gb
Rx 6650 xt
Rx 7600
Same price
that sounds like something quite realistic
6650xt
6650 or 7600
best one of the bunch iirc
depends on the power envelope but the other two are definitely cheaper than the 3060 unless you live in a more remote region
Those look edited though.
In my country they are same price but the 3060 is 10 bucks higher
I'd jump up and go with a 4070TI super or 4070 super.
mmm 10 bucks isn't a lot
which 3060 is it
also idk tho, it looks real enough. then again im not taking rumors to heart
3060 is a good card though.
if it's not a ventus then sure
if it's 10 bucks more, depending on which exact one it is
7600 is kinda just plain better
Zotac
Even if it is a Ventus as long as it's a 3x he'll be fine.
bleh
7600 kinda the best then
I found 7600 steel legend is it good?
Zotac's are great cards though.
steel legend is nice ye
I've seen some insane things specifically with the 3060ti and 3060 twin fan zotacs
And xfx 6650 xt
What card are you coming from and what's your target resolution/frames?
XFX is nice too
wee bit loud
The low end xfx cards are great imo
This is a new build
i'd prefer steel legend
steel legend would def be quieter
I came from xbox series x and i want to play 1080p 144 fps
it would be the quietest of the 3
So first desktop, or are you upgrading?
or games that matter
you'll hit that really easily
tho with some changed settings here and there
first desktop
Ahmad
Yes
is sapphire pulse available
Let me check
That would be comparable to steel legend if you want black
6650 or 7600
pulse is very nice
No its not available
damn
Sorry
Its 100 bucks higher
what cpu were you thinking of pairing with that there lad
id just get asrock then
I will not take it anyway
Ryzen 5 7600
yeah nvm then lol
I tend to steer clear of AMD cards for a few reasons, It may not be as obvious with some of the newer titles, however older stuff especially that which uses Havoc have issues with the cards.
ah ok 7600 is reasonable
RDNA 3 is about as good as Nvidia these days
During the days of RDNA 2 and prior, their drivers had a long way to go
yeah however the drivers still have major problems, I haven't seen major issues with Nvidia in years.
But nowadays, the stability is about the same
nope
Apart from the anti-lag+ incident they've been perfectly fine
Iโve found a rtx 4060 ti 8gb for 60bucks higher should i take it?
Its not opened from a website in my country
New
I daily RDNA 3, 40 series, 30 series, RDNA 2, 10 series
I'd get that
noooooo
4060 ti is like the worst value new card this gen
But its cheaper
than?
I don't get why folks are trashing the 4060 cards though.... other than pricing in some markets.
because it's a 3060 that's more expensive
Its 386 dollars
not to mention the existence of radeon
They price normalised their skus to match the 4090 so the 4090 itself would be more valuable, but as a result everything below the 4090 is now grossly expensive
the Super skus wouldn't exist were it not for them charging way more than their amd counterparts
what's it cheaper than tho
and what brand?
$/fps 4060 Ti is amongst the worst value of new gen cards
That said, I'm saying this from a us market perspective
Gigabyte eagle
Eagle is a fine card if you use a gpu stand
but what is it cheaper than
you said it was cheaper than something lol
Its cheaper then the new rtx 4060
h-how?
Against it's brother, fair enough
The 7600 is 334
The 3060 is 346
steel legend 334?
Yes
are we talking Radeon or AM5? LOL
Do i realy need a stand for it?
gigabyte cards have thinner pcb
Is airpods good as a stand?
Lol
If it's a few hundred grams, it's fine
heavier models need a stand
if you get it and it's like a kilogram, you want a stand
tl;dr the pcb flex from gpu sagging slowly kills gigabyte cards
They have issued a revision since this, however always worth it to be vigilant
GB has been a trouble company for many years because they use thinner PCB's than nearly everyone else.
it still has a wide divot, but it's been strengthened
But yeah, apart from that, I can see the eagle being worth it for 50 more
Tho in most markets that card is normally a pretty yuck buy
@unique cliff can you list out the other parts you have in mind
Probably worth helping where possible here
Definitely ๐
you've got at least 4 veteran builders here myself been doing this as far as upgrades/modding/overclocking since 1994.
Like a common misconception for people buying into AM5 is they need a mid tier board when there's a ton of low end options that are as overbuilt as their mid-range counterparts
This is the best side of AM5 though, you can get something extremely good for as little as $100
e.g
I first learned to overclock in 1996/97 I overclocked my 486 DX2 to DX4 100.
This is the build
Ok Ahmad 3 things
i chose fsp 550w but i didnโt find it here
Thanks
Do you have a jonsbo version over there
Jonsbo make the 205m mesh themselves
it's called the argb-q5
Jonsbo?
I donโt know if i will find it in my country
As a veteran builder I say 850W or better because your highest component is going to be at least 500W. and the 4000 series cards need an ATX V3 PSU which supplies 600W.
yeah I was gonna suggest a bigger psu for this
Is this good psu?
but i'd definitly do 600w+
600, 650
I look at overhead and future for upgrades.
Oh i canโt sent a photo
good unit of some variant
cheap option is apevia prestige
Fsp hyper k 700w
like this would look better to me ahmad
Part List - AMD Ryzen 5 7600, GeForce RTX 4060 Ti, SAMA ARGB-Q5 MicroATX Mini Tower
hyper k is in avoid tier iirc
Check out the cultists network for PSU's
d tier
I found it for 58
yap hyper k is the bad one
They have a list you should follow if it's not A or B tier you're in trouble if you're gaming.
hard pass on that one captain
it's old and bad
550w isnโt enough?
the msi 550w one is fine
It's a white brand psu with no safeties
but the fsp hyper k isn't
any alternatives?
You kinda want basic safety modules in a psu
things that protect it from frying
FSP Hyper are hit and miss unfortunatly. ๐ฆ
adding for overhead.
230V?
What about cx 650
CX 650 is good
which cx?
Tier C are more for workstations, you'll want to jump up to B at the lowest.
i hope it's the newer ones
grey label
c tier is fine, it's usable but if budget allows might as well want b
Can i send a photo for him?
you can dm one to me and i can redirect it here
That's why I said B is preferable ๐
but if it's not like, ancient it's usable for this spec
No
got a link to what you're looking at?
looks like the newer ones
should be ok
he did post this to me too
same price
dis too lol
none of the above
Which of them
was it the Gigabyte version? LOL
Ok i think i will not take a gigabyte psu lol
Funny thing is if I remember the CM is the same unit built with better components.
yeah NVM LOL remembering wrong ๐
Honestly you want a modular unit though
so if any cables or connectors go bad you can just replace them.
the odds are too low to worry
As much as people like to hate on EA, I will say that... at least their app actually works... I had so much trouble yesterday with the Battle.net launcher, and not one bit of fuss out of the EA app today.
when it's the matter of fitting the budget or not
Semi or non-modular is fine tho
non modular is fine
2 zip ties and the cable problem is solved
Modular is also cleaner and easier to route cables.
semi-modular is a nice middle ground
not always ๐
I have seen decent cable routing work from a strix prebuilt I had
depends, mine does not
It had some random 550w bronze non modular
and semi can be a middle, however I really dislike the semi's
enermax maxtytan 1250w
I've not had problems with stiff cables with modular units.
Ok I've never used enermax before I'll give you that
max titan 
tho when I say stiff I mean like, folds like a wallet
Haven't used an enermax in years ๐
soft folds like paper
Titanium rated efficiency and is an A-tier unit
the name is just funny
The few non-modulars I've used fold really well
Like tuf bronze is amazing for this
Use the included velcro straps
oh ok then yeah they kinda are like that but its fine for me
feels more secure that way
ofc
Tho for management it can get a bit frustrating in cluttered spaces
won't fold properly, gets stuck in corners
I'm currently using an ANTEC PSU
it's not per se, easy, it's finicky
I had an HCP 1000, had a brainfart and water dripped into it.
I forgot to tighten something AND put PT over the fan.
HCP or HCG?
if you didnt play Army Men on N64, then thats what that is
which one
Pf650d
HCP the one with like 160A over 4 rails.
Bronze
it's pretty new and reviews fine for your spec iirc
to compare to that tier list, somewhere around tier C-ish
Corsair CX650 would be similar
So the cooler master is better or they are the same
the corsair imo would be the best
the other 3 you've shown are fine for what needs to be used
If you do get a Tier C unit, just make sure you plan on saving money and upgrading it within a year or a few months for peace of mind.
you have a 90-ish watt cpu with a some 150-200W gpu, you should be more than fine
just as long as it has reasonable safeties
like OCP, OPP, OVP, transient excusion response, transient response
surge protection etc etc
that's what these units are about
It's not the wattage or the bronze rating
If you were me which one you will take
I'm about to see how my PC handles Jedi Survivor
Ok iโll take it
My CPU has a higher TDP rating than my 5700 XT lol
Corsair are very good with warranties so it's a big plus
How do I get out of bed
@tranquil pebble Good luck, I bought the game twice and refunded twice.
climb
its on gamepass now so no worries on my end
Thank you guys
well you definitely make it seem that way
what with the how to un-bed myself and stuff
๐
np btw
The rest of the build seems solid
except that ssd
the NV1 you must change to something else
this is universally cheap almost everywhere:
https://pcpartpicker.com/product/64MTwP/team-mp33-1-tb-m2-2280-nvme-solid-state-drive-tm8fp6001t0c101
same with this
dramless hmb but perfectly competent for daily
Partpicker's been having issues with their cloudflare lately
?
๐ง
I haven't noticed any issues with CloudFlare recently
My cloud is flaring
You are the cloud to my flare
To:
From:
yeah that's the stuff
Must be acting like a bot too much
ah
No freaking clue.... Either that or other people have been using the same IP's I end up with and botting with them.
In all honesty, I only get the verification stuff on a VPN or public network
Maybe
I didn't start having problems until I ended up on windows 11.
Though DHCP public ips don't generally refresh all that often with most ISPs I've seen
Its ok to use the stock cooler for a month or 2 ?
yes
Mine only refreshes when the router restarts
however They don't all come with stock coolers.
The 7600 have one right?
the 7600 will run fine with one
you could really use it for as long as the cpu lasts
the peerless assassin is only what, 30USD depending on model though right?
Bomb has been planted?
Lmao
LOL
Do you have a video for that psu exploding?
Just look up Gamers Nexus on Youtube
they kept a fire extinguisher nearby...
Iโll do
They do for all PSU tests, however they literally had one sitting next to them off camera.
for that test
Good
I still have one of those
A P-GM
๐
From the first gen too, it wasn't valid under recall
I use it for test booting
is the bomb still planted?
good
I did however own an 850W that did in fact die
It OCP itself to death
Stopped turning on anymore one day when I was on I think cyberpunk?
nothing else died luckily
I was very lucky
Claimed a warranty, and negotiated with the store to use my claim to exchange for an RM850X and never looked back
yeah I had a PSU that was a GamMax years ago Blew up while I was playing CRYSIS 3.
It's more of model over brand but gigabyte's response really dug them in a hole
with even higher transients
it was supposedly a 1KW PSU LOL
I told the guy he should stop selling them because they were crap.
they definitely are
They were crap in 2013 LOL
Gamemax makes like, 3 things that are ok
knockoff Sama cases
the meshbox
and the spark
everything else is terrible
for the record by the way all those things are knockoffs
๐
M60 is passable, but still very cheap
The spark
that's some crazy plasma there
What high voltage does to a mf
you got M60, Meshbox pro, and I believe an IM01/IM02 knockoff in like oceanic/asia
everything else
from gamemax is rubbish
Sponsor: Arctic Liquid Freezer III on Amazon - https://geni.us/5N1BRr9
Today we're "reviewing" the GameMAX "Hype," which DEFINITELY ISN'T inspired by a Hyte Y60. The Hype case is anywhere from $100 to $200, depending on where and when you look, and has poorly copied nearly every aspect of the Hyte Y60. We haven't seen a ripoff this egregious pre...
Real
LOL
Rate the scan from 0 to 5 (the higher the number the better)
nice Bir
You mean that btw?
yes
that isn't a bird...
it's that:
Yeah, i have that quite some time, the only reason it survived that long is that i wanted to make a Photoscan of that.
That's a really convincing parrot
hahaha
I give that a 2/5 I had no idea what it was
Had a good laugh tho
4/5
It has only Aluminium shell to protect the Chocolate on the inside.
And i really now wanna finish that.
So i wait for the iGPU to finish the computation.
what IGPU intel?
why?
Specifically MeshroomCL
CPU and GPU are already in use
so i try to use something i don't really use usually.
which is the iGPU
for science
That makes no sense to even do it that way even if experimenting...
Nah, it is more of "for fun"
at first glance yes....
You're Choking? 

Anyways, i'm for real with the "i'm computing it with the iGPU:
If a real GPU was computing that, it would need less than 2 seconds per sweep
like 0.4 seconds if i remember right.
depending on dataset
And it is with my Specific GPU meant
Well, as i told: i might as well use the iGPU i paid for too while buying the CPU Itself
Like Why did i get the Intel Core i9 10900K instead of Intel Core i9 10900KF?
You could turn off the igpu if u donโt want it
it will improve overall performance too LOL
Turning off the AMD onboard GPU on my 7950X was one of the best things I could do for overall stability with everything. I'm using too many PCI-E lanes otherwise.
Well, then i wouldn't use the iGPU that i paid for.
If i specifically wanted a iGPU-less CPU, i would run for the KF variant
That's just simply crazy logic.... AM5 comes with them stock as an option for those that can't get a new GPU that might have an older one which the AM5 GPU would be better than.
I bought K cause it was cheaper than kf 
having igp is good for diagnostics
if your dgpu happens to die or a pcie slot went out
you'd know
Exactly and that's another reason AMD included them on the AM5 lineup.
there's 7500f tho, chinese exclusive
and rumors of 8400f and 8700f
pretty much igpu-less 8000g apus
This works fine in intel right https://techwiser.com/set-default-graphics-on-windows-11/
that only applies to laptops and/or multi display
Oh.
Anyways, how is that model?
And that is before MeshFiltering
A. I didn't want it enabled to begin with. B. It would have worked fine, I just needed and wanted the added performance and stability without it enabled.
C. If I didn't have the 3070ti or any normal GPU I probably would have used the onboard GPU.
๐
i like cpus with igpus because i can repurpose them as a server when i dont want to use it anymore and not need a dedicated gpu
for me the onboard GPU is a bonus for diagnostics. It was also a life saver when my system tried having a hemorrhage over the damn screens attached on top of just not liking the GPU installed at the same time initially as the onboard for some weird initialization crap.
While I might be a Veteran builder, I was an AM5 newbie in February as far as assembly goes.
It was like learning how to build a PC all over again.
ah yeah the igpu is also useful for diagnostics but that's like, once in the lifespan of the computer probably lmao
For repair, please contact me on discord https://discord.gg/DyKfG8scg
Or email me at tony@northwestrepair.com (ignore automatic reply)
Also my thingiverse page https://www.thingiverse.com/tonycstech/designs
Resources and much more are available on Discord.
#gami...
no air duster xD anymore
i wonder how much that repair cost
for the client
hmm he replace two ic
and one fuse
- labor
xD and shipping
also that card is stupid u can only control 1 fan in a software
the other 2 fan are seperate controller
Hey @elfin mural could you find an entry level pc for $150? Literally anything.
better off looking on local used market
you can occasionally get PCs better than this out of the dumpster
They said they have a budget of $150. So I canโt really build them anything 
I did a 4790k/16gb/512gb/1070 build for around 150

my friend found someone throwing out like half of it lol
asked if he could have it and then gave it to me
@elfin mural it happens
Ugreen NASync Private Cloud Storage Solution
Ugreen NASync DXP4800 Plus https://kck.st/3x2s7I5
40% OFF on (Mar 26th 8๏ผ00 am PDT-28th 8๏ผ00 am PDT) :48Hours
40% OFF on (Mar 26th 11:00 am EDT-28th 11:00 am EDT)๏ผ48 Hours
Up to 35% OFF during Mar28-May 9
โค๏ธ Support me on Patreon: https://www.patreon.com/JasonWitmer
๐ Check out BIG DECK ENERGY ME...
I mean MSI graphics cards are also kinda bottom of the pile so nothing really lost
Gigabyte is worse tho
Bad cooling is better than cracked pcb
lol
Apparently they seem to have updated it lately, but I don't trust that
MSI gpus are mostly fine
Only some heaps of trash appear sometimes
clickbait
there's no confirmation they're ending
however there's a clear trend for them to favour nvidia of late
Correlation โ causation
They have definitely downsized for radeon with the current gen, that much is obvious
But there's no confirmation they've stopped making AMD cards
And who could've guessed it, when their only cards for this gen are pretty basic from AMD

slowly maybe xD but they did indeed say they only gonna focus on rtx cards for now. they even skip 7800xt ๐ฆ
atleast they did not skip 7900xtx
beta read?
yeah
Hi
This guy thought that she gave it to him to test if it's effective or not and will eventually give it to the guy she actually likes. Little does he know that he is that guy.
Hello
You're new?
never heard of it
I haven't either
Intel statement on Core i9 stability concerns Intel has issued the first statement on user reported Core i9 processors stability issues. The company has put the blame on motherboard vendors who do not follow Intel specs. There would hardly be any difference in motherboard performance if it werenโt for certain features that allow users to [โฆ]
No
It shows you how we guys overthink
ehhh can they just accept it
so all of them ? xD
I went from a 1650 Super to a RTX 4070 Ti Super
my 13600k still going strong
dunno whats going on with the other models
i went from rx 570 to rx 5700
Upgrades
tomie likes '70 cards
Does RGB really boost profit margins?
Okay thx
np
eye candy yes
550 for 1650 super?
This made me giggle btw
no one will buy that
No
someone once traded me a pc with slightly better specs + $200 for a pc i was selling just cause mine looked nicer
Not that
i spent $35 making their pc look nicer and sold it for the same price i was originally asking
the reason why its so hard is because im now allowed to release it so its just for me - #shorts
PLEASE BUY A DANCE OF FIRE AND ICE!
https://store.steampowered.com/app/977950/A_Dance_of_Fire_and_Ice/
It's also on the App store/Google play app
FAQ:
What is the name of the game?
-A Dance of Fire and Ice, commonly abbreviated as ADOFAI
What key...
anyone know what game is this?
it has muse dash feel on it but its not that game xD i think
I'm dropping down to 80 series cards for now on. 80ti and 90 series are too much now on the NgreedAI side.
Under think maybe
nvidia aint for gaming anymore
they turning into expensive ah gimmick cards
Yeah. I do the same
):
https://www.youtube.com/shorts/dsgQdr0CVZE?feature=share this video feels something u will do @dusk knot
https://www.ebay.com/itm/196357839408 @sinful blade at this point a laptop is just better
for $10 more you can get 4500u tho
Spain 2026..maybe
I'll get a nice 100-400mm lens by then
@dusk knot where the eclipse pic bro, i didnt forget
You haven't seen them???
no
@rancid juniper my favorite one
nice shots
i forgot whats the name of that crystal like view
The diamond ring effect, or if its smaller It's called Bailey's beads
yea that ^^^
The last picture I sent you shows Bailey's beads@rancid juniper
It's created by the uneven surface of the Moon
By all the mountains and hills and other features
very cool
Yeah. It's truly amazing and is the greatest celestial event you can never witness on earth @rancid juniper
In person it's magical
Pictures are just flat
One of these days you need to see one, it can be life changing
na, i was in Australia
You travel? Lol
yes i travel fr
You didn't even tell me ):
I don't think you can see it in Australia
It was only in the United States
You're lying to me
wow thats crazy
you know you weren't either when overwatch was in your library
cmon now

a take everyone can agree on
Yes
I have time to play if you want
aight
Let's turn some cars into oversized crushed tin cans

I only have the game for crashing honestly lol
ngl i do the very same
gonna install 50ft tires on my car

jp's life
Provided to YouTube by CDBaby
Five Knights at Freddy's ยท Vivintinn
Five Knights at Freddy's
โ 2023 Jeremy Carter
Released on: 2023-12-13
Auto-generated by YouTube.
โ ๏ธ
what happened to ur pc?
oh
why not get a new pc then
do both
I need to find a monitor arm that can go 2 feet higher and hold a 32inch
Hm
not having any pc at all is a bit of a pain ngl
even having an office pc (with ssd) is enough
One sec
Lemme help you
I dont need any pc
Im happy with what i have
which is my switch
And my 3ds
its gonna be going higher than my current monitors
So a single monitor mount?
Also
I dont really use a pc for anything anyway
Uh
Did someone say something and then delete it?
hmm
i lost my house in this gta online due to i forgot to pay it xD but i dont know which part of floor did i live before haha
now im just buying random houses until i hit the one xD
hope no one outbid me
all i know its floor 12 xD
For repair, please contact me on discord https://discord.gg/DyKfG8scg
Or email me at tony@northwestrepair.com (ignore automatic reply)
Also my thingiverse page https://www.thingiverse.com/tonycstech/designs
Resources and much more are available on Discord.
#gami...
hmm
"buying mining card is fine"
xD
300mph racing
so can you put in your own cars in assetto corsa with mods?
that would be excellent
i think most of the car mods in assetto corsa were ripped from many racing games
but i think there are genuine custom built ones
so yea
good
imagine driving the damn krabby patty car from SpongeBob in assetto corsa
best game 10/10
guess how much HP this thing has?
I feel like this is a situation where if I tell you the HP it would have in real life youโd tell me that it actually has a jacked up amount of HP
okay
1000HP
double or nothing
2000HP?
of course it doesnโt really have 2317hp in real life does it?
so I was correct all along
@misty sparrow
god damn
the hell is that flame
Got that napalm exhaust
that car be on fire
no way in hell anyone could drive that in real life
Imagine how your face would feel
๐
top fuel dragsters exist tho
^^^
and is far faster
so do cars with godlike acceleration
it takes balls of steel and skill
like the Tesla S Plaid
after reading stuff
i think i should buy anker charger
other brands seem to kinda suck
and official chargers from samsung are expensive
lmao
Anker is great
almost misinterpreted it as ankle
im looking for compact chargers with 25w power
Oh I thought you meant cables
i currently have a xiaomi one
Idk about their other stuff but I think it's good as well
ugreen is decent i think?
okay seems the dimensions on this anker im looking at is ok to go
should fit where i plug it in
โHey, that guy with a prosthetic leg has a phone charger in his leg. Cyberpunk world weโre inโ
hmm saw this at fb market place
rs 590
its all white
the design of card dint envolve at all xD now a days
that looks like now a days gpu xd
now this is speed
i like how physics works on that game
if u hit a bump
xD
Some of them are thick boys I have the 3 port at home
It comes with a plunger to hold it into the socket
the way the car screams is hilarious


