#peripherals-and-displays
1 messages · Page 134 of 1
key
chron
cough
Keychron K2 is a 75% layout tactile wireless mechanical keyboard giving you all the keys and functions you need while keeping it compact. With the largest battery seen in a mechanical board, Mac layout, connect up to 3 devices, comes with wired cable option, and 15+ types of RGB lighting option.
Keychron K6 Compact Wireless Mechanical Keyboard. 65% Layout. Wireless or Wired. Users can hot swap every switch in seconds with the hot-swappable version. Compatible with Mac, Windows, iOS, Android, Linux. Optical or Gateron Switches. Connect up to 3 devices. 15+ RGB Backlight
Keychron design and produces unique wireless Mechanical Keyboard for Mac, Windows, iPhone and Android.
Anyone recommend a good mic under 70 dollars
fifine t669
samson q2u
@queen sigil I seen that one but was not sure how good it was
Fyi I will be using this for making videos streaming and for classes
@hearty schooner my friend streams sometimes and he has that mic and it sounds good
itll do itll do
it sounds ok, just keep in mind with all mics really it's better to be just a few inches off of it. except perhaps a shotgun mic

Do you guys reccomend any cheap wireless gaming keyboards
And if the guy from the other night is here thank you for showing me that hdmi to vga thing
I need under 30$
might be some logitech wireless membrane keebs xD
Welp. I have to wait to truly enjoy my Koss UR40's
My USB-C DAC I already have is super bad. Way too bass tuned.
And the cable is way too short on the UR40's so I need a 3.5mm extension cable.
That and I also need to re-do the little sticky thing for my Modmic.
Though, I am close to just saying screw the modmic and get a Fifine mic until I can afford a Shure or something.
feker vs kiwi vs u4 and the last are just feker
sound kinda nut but feel way too tactile
TOO TACTILE? NOT POSSIBLE
you have much to learn
i like the rounder bump of the t1s
also the stock springs in the fekers are like the worst thing to come out of china since like forever
i really wanna do a clicky build tbh

so i should get different springs
I wanna do a tactile build 
already have a bag of tactiles
@timber ridge then get cherry blues if you want clicky >:D
ima go even louder
and get outemu phoenix
man, i should try to make an annoying sounding keeb
alu case with no dampeners so you can get maximum spring ping and click sound
if u want spring ping just use feker springs lmao they suck so bad
uh dont order directly from sprit but him and tx are good, gon springs are nice but those are much harder to find, thicthock has some good progressive springs same with the giant springs (some place sells them alone)
I think i'll get tx springs
punchy springs, hinghinghonghing, and catweewee are nice older springs but super hard to find
@queen sigil u no pink
huh
also is txkeyboards a good place to buy lube
hm
Divinikey is a US-based online retail establishment serving the mechanical keyboard community with top quality customs, DIY kits, lubricant, switches, deskmats, keycaps, and parts.
basically a mini kbdfans
ill check it out
are the glorious pandas much different than the drop ones?
i dont think they are that different
never tried gpandas tho
and Ive only tried holy pandas like once
i almost picked up during the bfcm sale
hmmm
maybe
the cheap chineese brush I got is starting to lose its hairs
or bushes
idk what its called
just use a small paintbrush
i needa pick up 105 too
im prob gonna put the order in for 105, and kbd foam sticker for stabs
its not as thick as 205
yall should pick up ro59 lol
dry lube
isnt that what they used on alp switches i think
yeah people use dry lube for alps
leo you changed too

bruh what the
everyone changing
nacho is the only OG left
wdym
id love to do a build with ro59, it makes mx switches super clacky but its a ton of effort for a good coat https://www.youtube.com/watch?v=ZG0XLQQVQu0&t=10s
Keyboard: Duck Blackbird (Black)
Plate material: Stainless steel
Keycaps: GMK Solarized
Switches: Gateron Blacks
Lube: RO-59
Stabilizers: Genuine Cherry screw in, lubed and clipped, Band-aid modded
Springs: 52g Kustom Lyn springs lubed with LSD oil
Artisan: Heterochromic Shishi (KeyForge)
White switch film from Kin
FOLLOW & SUBSCRIBE
Website: h...
you're bright blue now
isnt there like powder lube
u used to be pink ;;;;;;
yes i stopped boosting this server
i miss the old leo
because I dont care

I started boosting because someone told me not to
and then I just forgot that im a booster

i lurk everywhere
O_O
theo has 20 monitors, one for each channel

hows that flashlight theo 🤔
a lotta ppl lurk peripheral chat
@thorn grove how's ur pants
tough
yea
flashlight is neat
im reformed
I bully people in general who are too scared to type in #peripherals-and-displays
so i jus hit em with the "okay ahaha"
have any of you looked at the moonlander keyboard
no more rerouting cables under me desk again
desk too clean
i mean sure it works

clean is synonymous with minimalism and im no damn minimalist
my desk is pretty dense with stuff lmao
huh
lemme catch a link
whats plugged in ur amp rn dino ?
An open-source keyboard for serious developers, gamers, and people who care deeply about their craft.
seems a bit pricey for what it is
it is super pricey yes
SSP
you might aswell build a split keeb if it cost that much
im not a fan of split keyboards in that layout
id rather go for a split rather than some split ortho
i mean its got 32 layer potential, all through on board memory so no need for software after porting it on to the keyboard
Ima be real ortho wins no matter what for me lmao
this is like pain27 levels
that cant be real
its not advice
oh hey i know some people getting a chiffree
visit the 40s discord server for yalls weird small ortho boards :v
yes u know weird people
like that one guy with 3000 40%s
no no. i dont like 40%
uh i know a few with too many 40s
it terrifies me someone can live with such little keycaps
but if u mean that planck dude then yeah
alphas only
so good
niceu
i just think ortho linear makes more sense
as well with colemak or workman
but i cant do a whole 'nother typing layout
I aint saying colmak,dvorak,etc arent bad
they're impractical af when not a home job like programming
but I honestly dont think orthos have that much better of a typing expiriment
Reason: Duplicated text
sure maybe not that much but theyre more logical in everyway
But it loses the easy accessability of the mods
lol
wym?
idk how they use them
id be fine with all but that last one
like ive seen something with that layout
but that just looks weird
maybe its just the 2u key
or whatever size it is
you know what, you can not like ortho, but you should never like staggered over ortho
thats a common space bar for those tiny boards
top and bottom ones are p cool tbh
anything more on the bottom one?
No im just talking about the key looks out of place
oh its not centered lmao
uh think its a custom design
it looks kinda crooked
dunno why it has a lock on it but
@west hornet any mic recommendations under 150 xlr and usb
q2u and atr2005usb? i think it was are nice xlr/usb mics. for xlr mics i really like the neat king bee or the worker bee ~100-130ish
oh also for usb the elgato wave is really nice
have you looked into the mv7?
yes I like that one too, tho some people say it actually sounds a bit better on it's internal amp via usb connection which is a bit strange
iirc that ones ~250usd
it cost about as much as a budget amp and mic combo
yup 250
the podmic looks p nice for its price
ya that's another good dynamic. you can look up reviews and sound tests to see what has the sound you are looking for
yea, i did some light research, jus wanted to get someones ops on it
ill update ya if i decide to pick something up
kk, and ye good to get others ideas too. also i am very forgetful for its definetly possible for me to forget a few haha
at2020 is 99 right now but im not sure if its one of those products that are on sale all the time
or if its an actual sale
ye that's all the time. at2020 price currently is ~100usd
personally I much prefer the worker or king bee at the price but its all up to you
only downfall to a lot of the xlr mics is no simple mute switch imo
i tihnk ill spend like 170 b4 tax at most on the mic alone
something like the goxlr has a mute button so it's possible that other mixers or interfaces have one. or maybe a keybind. or just turn the dial down slowly haha
he got the boot
anyone know of any good mic for under 50 cad?
idk cad to usd conversion but i think the fifine mic should be under 50 cad
would that work with a mic stand? if i get it seperately
ya but then its like 90
if not, it comes with a mini tripod stand that you can use for the time being
alright
if i ever do get a dedicated good mic, it definitely needs to be an arm
i dont really care about my mic, but ppl always say its not picking up what i say
and its like right next to my mouth
oh no
theres more than one
that cholax has 3 roles
👀
he got booted
wym by boosted?
wdym booted
o ye i got it up
i would avoid boost, does strange things
fifine
Samson q2u, maybe a hyperx solocast or razer seiren mini you can look at too
wait what happened to cholax
he sent a brown crying emote
and lets jus say the name of the emote has a word that can get u canceled
Hmmm i feel like I know what part of the name was
probably
cholax just did a DINO MOMENT
but i think thats way worse than talking about Dekoni Tips
poor cholax
what a rotten bit of luck
tragic
idk
also apparently they come in an acrylic case
guess i get a free acrylic switch holder
pain
im gonna try to talk to Forks to see if he can lift it
hes annoying af but i really feel bad for the kid, seems like he gets picked on by his parents and bullies alot i feel like this server is a part of his social life somewhat
good guy dino
no i got bladee
actually hit me with Red Light
actually no i need Ecco2k more than Bladee
hit me with e
dm me mf
i tried msging him but he didn't respoind
that boy has a curfew on when he can use discord LMFAO
HA
what did you buy
i hope this brings you pain
6xx?
yes
haha i dont know what that is
MID BASS GANG
I just know you people say its good
yes and there is something terribly wrong with Kuzu
and the guy who i sold my 58x's to
im just kidding everyone is different
though detail on planars are objectively better than dynamics for the most part, but disliking the 6xx as a whole aint it

saying innit, too far
well apparently I hear more treble than all of y'all
dino booli 
Unless I got a defunct unit my ears do not deceive me, the 6xx are stinky
my ears are ear shaped
Even the bass is better on the phantoms
Probably cuz bigger driver
By more than 2x
Kuzu, if you had not gotten lucky to get Phantoms for that price, would you think that wouldve changed your mind about the 6xx id you didnt had Phantoms as reference?
Maybe
Although I must say the 6xx aren't very comfortable either
isnt the clamp force jarring out of the box
For my gigantic cranium
it killed me
Yeah and heavy clamp
Started to hurt within minutes
Basically no included accessories, drop exclusive, I give it 7/10
i had mine like this for a few days and it was still heavy
Dang
hahaha big head
I don't think they're gonna give me a refund...


"we stand behind our products"
Ok, have it back
I think if I didn't have MODDED phantoms as well I might've preferred the 6xx
:face: moment
The phantoms require two very easy mods to reach their full potential
Free mods, no additional cost btw
- Remove the foam
- Bend the doohickey to make them clamp better
Bam, you now have an A tier headphone that's super comfortable and easy to drive
i love removing doohickeys
As far as price:performance goes
At $200, the phantom would definitely win hands down, but at $350, hard to recommend
I don't have any more headphones to compare to though
But I feel like the 6xx is not a proportional leap in quality for the leap in price
I wonder if the jubilees would at least feel like a better value proposition
Id be very curious to try 5xx, maybe being a planar fixes the sound
i will have 6xx to compare to my 5xx soon
Considering their also both the same price the 5xx seems automatically a better value, I should've gotten those
5xx are W I D E B O I S
its actually hilarious how airy they are
its so wide that the music actually feels disconnected
they are very specific purpose headphones, i only bust them out with certain music
How's the detail
Allow me to give you a test song
well its bc its the only planar i got
holy imaging
If the "get looooost" *heavy guitar* bit doesn't have sibilance at all, it has good detail
God I can't type well on mobile
Well it means either good detail or heavy enough bass to compensate
Kuzu if you think the highs on the 6xx are sharp i dont think the 5xx is for you
its definitely not for you lol
no the only sibilance i get from my cans are from my m40x's
i dont get sibilance from the 5xx theyre not exactly tinny bois
gonna learn how to code
Is... Is burn in a real thing?
might be a software engineer
driver burn-in is bs
ear burn-in is legit
what is burn
Unfortunate
opposite of wet
Some people say headphones sound different when you let them run for a while
Like they're flexing their muscles of something
the drivers dont change, your ears just adjust to them
isnt there like burn in stations where there is like 8 outputs
jus to burn more than one iem or can
That's the most pointless thing lmao
I really wanted to like the 6xx
I really did
I was hyped on them for so long
driver burn in is as baloney as snake oil cables
But I listed with my ears and not my wallet and my ears prefer phantoms
Dino if you have 5xx why even bother with 6xx
where can i buy this key
ur ears may be cursed
Like why go back to dynamic???
bc i like centralized vocals and the 5xx is like the complete polar opposite of centralized
theyre as wide as that man
Kuzu dont force yourself to like the 6xx
its pointless
my decision on getting the 6xx doesnt mean you should give them another chance lol
Preferences are preferences
Ok another another point
Their cable is kinda garbo
Won't fit in phones with protector on
Your loss
Your loss
ooo you securing 6xx?
One thing I don't get is the weird way a lot of the more expensive planars are lower impedance
bag secured
Like I guess they are marketing their ease to drive but like???
i lowkey wanna get 6xx jus bc kuzu doesnt want us to
YES
32-48 ohm is perfectly acceptable
Ninj is getting a pair too this is perfect
It is possible
Although after watching the tour of their factory, it seems incredibly unlikely
Didn't you say it's possible it was just defects making the 6xx sound bad
Unlikely but not impossible
another L for Kuzu you hate to see it
I just have the strongest feeling in the universe there are better headphones in the $220 range
Probably some other Chifi
akg k371 or dt 880
yup
Yeah probably
id throw 4xx in the bunch too tbh
I beg you, don't get these clamp monsters
lance get them
i might
Ninj will get them too
its jus a tad bit over budget
There is no end, only more headphones
ok get some boring ones
400i 2020
best things in my budget are dt880s and 4xx imo
400i are kinda like 4xx with a dif low end sound signature
bright u-shape vs. v-shape
ill just listen to my computer fans
😔 ✌️
LMFAOOOOOOOOOOO
i think my 5xx is at 18 or something
Terrible
funny thing is, i have them on hi-gain
93 db is low-ish I guess
I think t2 are like 103db per mw
But are also 32 ohm
Wait only 20hz-20khz?
I mean thats the important part yadda yadda but most planars go higher and lower don't they
And like, personally I can hear 14hz
@tacit wing y do they call tiny girl in genshin impact emergency food


rip flippnflopp
foobar
me when dino forced me to get Spotify
bl05s came in kinda lit
Paint them
banned
need to take fancy pic
They need to be not green
you mean couch
that aint no damn couch, that is a man's sweatpant 
@tight pulsar get dekoni tips expeditiously
dekoni op?
on second thought, any foam tips on Amazon will do, Dekoni is just name brand and i like them
Dekoni's are 10 bucks a pair or 20 for 3
congrats on the Blons those are pog

ordered durock films
anyone know if theres a fix to the top row of keys not working (repeatedly pressing themselves) I have a tecware phantom L and was able to disable them in software but it be better being able to use them until amazon ships the replacement
repeatedly pressing themselves eh
I tried pulling out the switches to see if that was it but I cant get them out lol
switches are supposed to be hotswap (on the tecware) , you got a switch puller?
yeah
even watched a video to see if I was doing it right but cant seem to get them out
came with extra switches too but cant get the old ones out
theres a little bit of wiggle when I try by hand
use switch puller
Yeah thats what I've been doing I just tried by hand to see if theyd move
like with the switch puller you should grab the 2 tabs on the ends of the switch and then it'll start moving
I cant seem to get under the top to be able to grab

Example pulling switch out
oh the videos I saw used the plastic one I can try the metal one
why is it so sparkley
Right is keycap puller, left is switch puller
also why do u just not have any switches in
wdym sparkley
@daring zenith r u in USA
yes
OK
y
These are what i have, still can't get it out with the metal one either
Tried a few different switches too
You see how I use the switch puller to push in the "tabs"?
need to push those in with the puller to get the switch out
and yea the metal one is the switch puller, plastic one looks like keycap puller
pretty sure all hotswap switches have them
Koss PPO4AA first impressions, heavy, look cool as hell, really comfortable to wear without pushing my hair to the side, look really freaking cool, feels like both of my ears are getting a nice hug, really good noise isolation, not too much pressure right out of the box.
they sound nice, really clear, but sub-bass is present, but needs to be eq'd the hell out of to exist.
low profile switches
hm
welp, pull the tab and try to get the top row out and see what's up with em
so like whats the difference between red, blue, and brown switches
feeling
there needs to be pinned messages to answer the most basic of questions
i swear Forks posted one on this channel
after eqing the literal hell out of these, they now sound really freaking good. theres a treble spike near the 2K dial thats really offensive
what explained it best for me were graphs like this
also no matter how hard I try I cannot get these switches out
at most I was able to get one side out but not the other
either way they sent me a blue when I ordered a brown so gotta return it anyway
force curve graphs are nice but since haata kinda retired theres nobody that makes good ones for switches
and a good accurate machine to measure them is like 3k+ :/
rgb strips for pcs or like ur room/setup
phanteks has some really nice one but im not sure if itll save the settings
im sure it should, but i think they make the nicest rgb strips
phanteks has 2 different types of strips, the one i linked then your more average rgb strips but those are really good too
LMFAO i got my Akatsuki mousepad for free
they refunded the money i paid them for GOD knows what reason
but im not questioning them about it
ggs
how much are their mousepads?
i ordered them a while back
kinda regret it, i could of saved money if i went with unit 01 tactiles and gateron caps
yesterday I found out about b and d stock for novelkeys
30 bucks for a 36x18
they only have it for their keebs right
yeah
id avoid d stock
for the nk65 entry edition its like 25$ for D stock
HA
so if u want to gamble
cuz its the joker

but its all out of stock
B stock is 85 USD tho
for nk65
entry
which id say isnt too bad
i think B stock is like what they find in production that has defects
while D stock is returns
prob
because of like cracks/pcb/etc
im kinda surprised that gateron caps come with like an acrylic case thing
i got em for 8$ during BFCM
if i didnt order those 01 linears i would of picked up cap switches
lowkey big mistake on my end
[IC] Shogōki Switch [ You Can (Not) Wait ]
should of got these, they lowkey have a better looking housing imo and i would of saved a bit
Are you just not gonna use a keycap?
what
its the little details that count
pb?
idk
but it looks like im floating around the 80s
if i practice more i canprob bump it up
For just talking on Discord and gaming should I get a standalone microphone or just a good pair of headphones with a mic attached?
I mean generally speaking having a seperate mic is better
so say like idk ur headphones break
u wont have to replace the whole thing
also i think it's generally better
get a standalone mic
I already have a pair of headphones if I decide for the standalone microphone what would be a good setup for a mic 150-200 max but dont want to necessarily spend 200 just a max budget
you can spend 35 dollars and get a really good mic
Then what would you suggest?
either fifine mic or wave 3
if the wave 3 is on sale, otherwise you can go with a wave 1
FIFINE K669B BLACKFRIDAY DEAL 15% OFF: https://www.amazon.com/dp/B06XCKGLTP
🎮 Cheap Games: https://www.instant-gaming.com/igr/SilentKlip/
🟥 Download TubeBuddy: https://www.tubebuddy.com/SilentKlip
💰Donate Here: https://streamlabs.com/silentklip1/tip
👕 MERCH: https://teespring.com/stores/sk-merch-3
💠JOIN YOUTUBE MEMBERSHIP: https://www.yout...
heres a comparison, you can see what you think best fits ur budget
you can skip to like 50sec
plus it does have Free Returns so if I don't like it then I can just return it so I can always just try it
Thanks for the recommendation
if you order from amazon, you should have free returns
and i think theres an updated fifine mic that has a dedicated mute switch and detachable cable
if you can find that model that would be greatly appreciated
are you by any chance in the US?
yes
there is not any reviews on it, but it looks exactly like their older mic with some updates (mute switch, detachable cable, etc)
so I'd assume it'll perform the same
What would be a good arm for that mic cuz the mute is nice just no mic mount thing like the t669
honestly any boom arm will do bc of how light it is
and I wouldn't spend more on a boom arm than the actual mic, but thats just me
Alright I know someone said to spend more on the boom the other day
But yeah that thing is light
there is pros to a more expensive boom arm, but i would rather put that extra money to a mic
you could get a $100 boom arm, but it doesnt seem ideal if youre only spending 50 on a mic
unless youre thinking about future proofing urself or somethign
Yeah
I'm making plans for future standalone mic and headset and wanna get something better than a regular gamer headset
im kinda going thru that same phase rn
earlier this year i got a fifine mic and a 20 dollar boom arm i think
and its really all you need tbh
im no micperson
🙂
TY
Ghosty the only mic person here
@calm cobalt what budget and xlr or usb
Sorry eating sushi 😦
USB or xlr just gimme a couple options for both
should list ur budget
Umm 100 cad max
xlr is prob not gonna be an option then
I also need some more options I am just talking on discord and gaming and the max is 150 some suggestions for both is wanted (get to me whenever you can)
I guess I’ll just list a few than:
USB: Fifine k669, Samson q2u, hyperx solocast, razer seiren mini, atr2005usb, elgato wave 1 & 2, shure m7v
XLR: xm8500, neat worker bee, neat king bee
Note the Samson q2u, atr2005usb and shure m7v are hybrids (work with either usb or xlr) xlr mics require some kind of interface to connect to pc
Ahh around that budget a elgato wave can be a nice fit, good sounding mic and simple to use
What interface would be good for one of those hybrids? I am thinking like 150 for the budget combined of both the mic and interface
The cheapest interface is a uphoria um2 at ~40usd which I find a bit noisy. Perhaps a umc22 would be a step up? I don’t know much about the umc22.
The seiren is bad, the mini sounds pretty good for its price IMO but both the mini and hyperx solocast seem to not deal with desk noise very well
I’m not sure I’ve seen a very thorough review of the solocast yet, can’t remember exactly
if 150 is your max budget, i think youre better off going with a usb mic like the wave tbh
Ill go with t669
If you get xlr do not get a xlr to 3.5mm or xlr to USB adapter cables they are very janky and don’t sound great, especially with a condenser that requires 48v phantom power
Me still waiting for a response from motu support 😔
m2?
Ye I’m trying to troubleshoot, been very difficult to find the exact cause. So far only thing I can think of is something wrong with the phantom circuit
What about t669
t669 is the best budget mic imo
at that price point, its hard to beat
and
Gaa I can’t remember between k669 or t669 or if there even was a difference. These naming schemes 
Same I do taht a lot
ducky one 2 mini should be like $45 retail
If it’s the one I remember ye it’s a decent budget mic. I know some other people that use it
this is the rgb 1
so like 100ish
i still think it should be like no more than 70
yeye, you got it for a good deal
but 100 dollars for a 60% and plastic build
kinda of a yikes
This one has a mute button and a gain knob would it be better to get this over the k669b? https://www.amazon.com/dp/B08P4LTX7Z/ref=nav_timeline_asin?_encoding=UTF8&psc=1 @west hornet
comparing a ducky to like other keyboards
gk61
literally half the price
yea, $70 would be a reasonable price for the ducky one 2 mini
still a bit pricey, but not crazy
you'd be paying like a 20 dollar premium for rgb and software over chinese keebs
you're paying a premium because its a gaming keyboard
and the price of premium is money and quality
yeah
keychron 12?
yes
wat layout it gonna be
60%
varmilo nice
ow
Not really sure what the difference in sound is but price is getting close to a q2u
mr1 a friend is selling his 65 buy it and join the smol keyboard club and it has ur favorite extra keys
would it be better to just go with the Q2U then and if I want later get an interface
nachos
does it have dedicated prtscrn?
does it have dedicated home, end, del, pgup, pgdn?
@queen sigil I said dedicated did I not
u can just
change the keycaps
thats why u get like DSA or XDA
because u put them anywhere
That doesn't sound very dedicated
Possibly, could be that I am q2u simp also, you can look up reviews on both. I personally like podcastage for reviews. Only downside with the q2u is if you touch the empty xlr port there might be some static
no like
I use every key
prtscrn for screenshots
home del pgup pgdn for afterburner osd
ok thank you I will look into this more and some comparisons between it being usb and xlr
and other things in-game

ghosty u should add q2u simp in ur name
i wonder if gat caps will eork with durock films
becaude apparently theyre supposed to be really tight
but durock films are thin
so idk
hav you tried using deskey films ?
what are the thinnest films ?
idk
is Harris Heller a reputable source for mic advice

Haven’t seen too much of Harris but the few I’ve seen looked ok, he should know something about mics and music from what it seems
The Blessing 2 Dusk is a retuned version of the immensely popular Moondrop Blessing 2, done by popular IEM reviewer, Crinacle. The Blessing 2 was already an amazing IEM, especially for the price and now the Blessing 2 Dusk takes that just a step further.
Huge thanks to Crinacle and Shenzhen Audio for providing this for review!
Buy Blessing 2 D...

Idk how that sound but it look pretty nice
clean
if those were in my budget i would of bought them
i think i will quit audio once i get my 6xx and once i cop Starfields
i cant take this anymore

no money left for Gacha game
i jus spent money on a gacha
once i get new cans im done with audio
and my amp and dac
which one
yo bleach that slaps
🤔 how would sundaras scale with a valhalla 2 and magni 3+
skip planars entirely if your planning on getting tubes
magni 3+ can pretty much drive anything
I want
i dont think i can justify getting any iems over 250
huh so planars dont like tubes?
nope
gotta get some Sennheisers or Focals for tubes 
the Magnius is a better amp for the Sundaras if youre sticking with the Schiit route
nah probably just going modi/magni and 6xx or sundaras if i can get them used for a decent price
i mean
kuzu might be selling his, gonna have to dm outside of this server
bc bannable
valhalla look so nice and toobs
wont be buying them for a bit so probably not from kuzu
tubes so hawt 
is it schiit dac you're picking up
yes
kek
havent seen u here in a while


















