#cases-psu-and-cooling
1 messages · Page 89 of 1
cooling and airflow performance corsair for more aesthtics 011D
O11D also has lots of distro plate options for liquid cooling fun
Makes for a good custom loop case
i was asking because i saw someone on tiktok saying how the 011d is better than any other case for ashetics and for looks and i was confused
It's the glass panels people like the most about it tbh. Bad for airflow but looks cool with a full set of rgb.
alright ill get that psu friday
it would be good if it had a front panel like a 4000/5000D
There's a mesh panel mod for the O11D
The cables or extensions? If the cables themselves what psu exactly?
Seasonic focus GX-1000 and the cables themselves for 8 pin cpu
Seasonic doesn't officially sell their cables so it looks like ebay/amazon is your only option
rip
It's actually mind boggling not being able to easily buy extra/replacement cables for most (mod) psus. No doubt compatibility or buyer stupidity could be a factor though.
I'm going to go with buyer stupidity being a large factor lol
You've seen Corsair's cable compatibility chart right? It's stupid how complex it is
I haven't, but I can imagine. Yeah, psu makers can't just have the port/cables be like how extensions are. 🧠
Lol, just throw any "standard" out the window. Make us buy a new psu if we lose a few cables.
The issue with Corsair cables is they include resistors in the cables themselves, so they need very specific cables to avoid shorts and over-voltage and such
Yikes, that sure is some extra complexity indeed. Interesting
At least corsair has things like the special 12 pin cable for FE 30 series GPUs
I actually got better benchmark scores using that cable too, about 100 points on time spy. Shorter cable means better voltage regulation or something.
plus when you are a manufacturer you want to limit the ways your product can hospitalize people lol
Many psus dont need those wack special cables w/ the extra stuff inside them though, lol. I do however understand lower voltage drop and such w/ shorter cables. 🤘 Also I enabled that GPedit about not seeing the welcome screen w/ a pin needed, Thnx.
Uh hello recently building a pc and i need help does anyone know what Cases Like The lian li o11 dynamic and the antec p120 crystal is or like the style is called the design fan placement etc like i dont know if its just a specific model or they have a name
or generally how to find cases like those
the o11 is nice looking but they are both terrible for airflow
🧠 🧠 🧠

You like the fans on the side? try 5000d airflow
the style is just tempered glass front and side
I mean, corsair already has a usb port on higher end PSUs, so I guess Corsair is taking the lead
They're trying to move to 12VO as the standard
for charging an old school phone from the psu? haha. Nah, we just need psu ports to be exactly like what a normal extension is. 12V0?
well and since the usb c can do 12v 5amp its already doing enough
now of course as far as how clean it would be and how thick the cables would need to be...
USB PD is supposed to be 240w max at 48v
12VO means the power supply only converts AC input to 12V, and the motherboard converts to lower voltage as needed. It's way more efficient.
any word on amps?
I believe that's at 20V so 12A
just going to quickly link
https://www.usb.org/usb-charger-pd
that would hurt
staying at 5a makes sense for most usb cables
and not electricuting users 😉
indeed
I knocked myself unconscious once
touched a capacitor in an old CRT monitor that had been unplugged for at least 30 minutes
not good
certainly caught me unaware
I’m an electrician. I’ve been hit by 120V way more than I’d like to admit
lucky for you thats alternating 😉
I've heard it takes much longer than 30 mins, and wouldn't dare mess around inside a CRT. 
Yeah Dc is a whole other animal
you heard right 30 minutes was not safe lol
Mythbusters right here folks
I mean I was only unconscious for less than a minute but it sure scared the heck out of me
I often work with vfd’s that have a 6 pack of capacitors that look like a 6 pack of beer. Those things scare the bejesus out of me
I gave up on an electric motor project after I kept getting arcs off 4 12v car batteries in series that was a little more than I was looking to mess with
Im only a psuedo electrician I'm an ECE
they only teach us enough about electricity to be dangerous
I’m no electrical enginerd myself. I just know how to diagnose a bad circuit lol
I'm not even that either lol electrical computer engineer so just a little bit of electrical engineer, a little electrician, and a lot of computer science
I can read a schematic but that's about it lol.
The most complex project I've done is a solar powered jack o' lantern that plays sounds
With a breadboard and programmable controller
I use breadboards almost everyday
I’m just breaking into this whole computer science thing. It’s a whole new world.
I still don’t know what I need for my front fans to light up, I don’t have a compatible motherboard and the Phanteks controller doesn’t look like it has the 3 pin I need
i think there was another controller out there that would work
i think this?
P500a front fans? They might be Daisy chained, but there's a small controller thing at the top of the front of the case
It ain’t fun, happened to me like maybe 3-4 months ago
Getting zapped by DC on the other hand is a whole other level is pain, I don’t recommend it
This why uk plug best plug
Ok Mr 220V
Nono not even that just like the safety features of the plug itself, although higher voltages is nice for not tripping switches
@slate creek https://youtu.be/UEfP1OKKz_Q
http://tomscott.com - http://twitter.com/tomscott - ALL THE ELECTRICS I USED WERE UNPLUGGED. DO NOT DO THIS.
Yep, I'm going all patriotic again. And while I'm willing to bet that a good number of British folks know the first half of this video, there's one thing about slack in here that I only just learned myself.
Oh no, babies can get shocked, anyways…
When can we play a YT vid inside discord? 
"you can remember brown is live because that's the colour your trousers will be if you accidentally hit yourself with it" 
Ages lol
Help?
Not on mobile
Also america does have dumb "tamper proof" outlets that mostly just make it tougher to plug in stuff, but eventually they loosen a bit & get perfect
Also thats outlet dependent and not universal 😤
@past harbor i mean you can play vids in discord on mobile just on desktop
Anyways... this pic is a fine idea (fuse in cord end), & how the 2 prongs are partly covered. Still watching. Although, doubt it's $2-3 per outlet like here. Price is part of why america isn't as "safe".
Jeez
Most I got zapped was by 750V cause of a stupid mistake working on an amp I was building
Bought a EVGA Supernova P6 1000W 80 Plus Platinum. How dumb was my choice?
Ok so my new PSU has arrived.
The cables for it are damn stiff and the SATA ones are not quite what I'd like.
Would cablemod be the go to for alternative cables or someone else?
What's wrong with the sata cables? And stiff is a good thing btw
If you bend them around a tad bit they'll become bit easier to work with
It's not a good thing when they are this level of stiff
The cable to the GPU bends around but bows to outside the case
The SATA power cables aren't quite ideal for how my drives are positioned in my case. I could move them but didnt overly wish to because I liked where they were
The motherboard power cable was mad difficult to get in as well
Yeah bending them back and forth a few times should fix
I'll give it a shot then
It's mainly this bit on the ends that's stopping it because that part doesn't exactly bend
It should a bit anyway i see what you mean tho
I've managed to do a test boot and it worked though so thinking about it I can go back to using my cable extensions again that were in before
I could get a tiny bit of flex but not really enough I don't think
This is how the cables are that came with for the SATA
This is ideally what I want
@fierce pivot
Just to answer from when you questioned it earlier
Because they will daisy chain across here and the ones that came with won't really do that
Ehh close enough
Not quite if it don't go
You'll be able to use 3/4 of them anyway
There is normally 3 drives there but took the other out to test something
That’s normal for brand new cables
I'll just have to not close the door on it 😂
It's more the SATA power that I'm annoyed about though with this. Could do with the other kind of cable but idk if I can get them that will be suitable with this
One of my GPU cables is the same way. Currently don't care and I just have the panel off anyways. tbh gonna try out the AsiaHorse cables.
Does anyone have a empty barebones case for a new Optiplex 7090 desktop?
Any cheap cases and psu I'm near a micro center
Hey guys. Anyone have reviews on the NZXT C750 Bronze semi-modular? Only ever saw 1 unboxing and testing video on it, mainly cus it was released towards the end of 2021 I think
corsair offers cable sets too
Including the SATA ones. Because that's the main ones I'd like
Microcenter is usually pretty meh for anything outside of motherboard and cpu deals so I'd recommend mx330 g air /mx330 regular with a arctic p12, and bitfenix formula 650w for 50$ 
Very meh and overpriced just like almost every other nzxt product
Ok that looks like they might be good for me. The SATA cables aren't a very clear image annoyingly so can't tell if it's the one I'm after
Hmm.
It looks like it might be the shape I'm after but just not sure.
Might be worth risking it to see if it's what I'm after
just make sure to check which Type and Gen your PSU falls under
Ok sure, thanks
really? here it's like the cheapest out of all the 750w semi-mods

What country?
Philippines
You guys use shopee right?
https://shopee.ph/Corsair-CV-Series-450w-550w-650w-750w-80-Bronze-Power-Supply-PSU-i.50916350.9717336776?sp_atk=e7d4b87a-f921-4dab-ae30-5bb3a32f029c same tier and most like a lot cheaper from what i can see
not Shopee, but a local shop I frequent. hol up lemme send the link
@fierce pivot should I get a motherboard from micro center and if so how much should I sell my z590 aorus pro ax for
this is the shop I frequent
DynaQuest PC
Interfaces/PortsSATA Connectors 6CPU Connectors 2 x 4+4-pin EPSPCI Connectors 6 x 6+2-pin PCIeMotherboard Connectors 1 x 24-pin ATXMolex Connectors 3ComplianceStandards 80 PLUS Bronze CertifiedCB / CE / FCC / TUV / cTUV-SUDus / China CCC / Taiwan BSMI R33245/ Australia RCM / EAC / UKCA / WEEEElectricalVoltage 100 ~ 240
but yeah. if it's good enough to support a R5 3600 and a 3060 with no OC, think I'll go for it
Uhh can I've some context?
You already got a working 10th/11th gen pc?
I'll have a look
thanks man. still not on the PSU tier list either cus it's so new
@fierce pivot all I have so far is a motherboard, graphics card.
Then i would go 12th gen
https://dynaquestpc.com/collections/components-power-supply-500-650-watts/products/seasonic-core-gc650-650watts-80plus-gold-power-supply-ssr-650lc bit more expensive but better unit
It is, it's down as nzxt c series brozne or something
so I thought, but when I checked the google spreadsheet, they still didn't have any tested units on it, which is why I had my doubts
There's a tier list in the pins, the data sheet hasn't been updated in ages
the one from cultists network, right?
Yep
PowerSpec RGB 650 Watt 80 Plus Bronze ATX Semi-Modular Power Supply $59.99 good or bad?
Not really tbh, it's still getting updates
Bad considering formula gold deal
Ahh okay last time i checked wasn't updated often
Good to know
Last major update was 2 months ago, but still getting changes on there
Oh nice
EVGA 600 BR 100-BR-0600-K1 600 W ATX12V / EPS12V SLI CrossFire 80 PLUS BRONZE Certified Non-Modular Active PFC Power Supply?
Phanteks AMP Series 750W 80PLUS Gold. Do you think I should buy this for 100$? I'm mainly buying it to upgrade from a non modular to a fully modular because I have a750 watt already
Not the best 750w for 100$, btw modular is just an ease of cable management thing
ik, i need it bc too many cables
cant put back panel on my case rn lol
if not that psu what other recommendations u got?
Whisper M, A-GF, revolution d.f., all modular, all cwt gpu, all should be around 100$ for 750w
Might as well spend the extra 10$ for an 850w
the 850 is the same price of the phanteks one i was gunna get but better so ty
How do i identify the type and gen my PSU is?
This is the PSU
https://uk.pcpartpicker.com/product/jRvdnQ/corsair-rmx-2021-1000-w-80-gold-certified-fully-modular-atx-power-supply-cp-9020201-na
I'm pretty sure it will be ok but these are what i wish to get
https://www.corsair.com/us/en/Categories/Products/Accessories-|-Parts/PC-Components/Power-Supplies/premium-individually-sleeved-sata-cable-type-4-generation-3-config/p/CP-8920186
Ahhhh cleverrr, thanks
Well dang...if im understanding that right then no it isnt compatible -_-
Yeah, making any plain extension work in a psu would've been too easy for us. Although, some corsairs and a few others do have their special cables with the capacitors or w/e inside them
It's not extension it's replacement cable
That's my point. 
Extensions are universal the pinout is x -> x instead of x-> y
Corsair doesn't actually manufacturer the power supplies tho
I'm saying make a psu with ports setup so a common extension actually would work in place of stock cables.
This seems like my next best option then. I think this is compatible
https://www.corsair.com/uk/en/Categories/Products/Accessories-|-Parts/PC-Components/Power-Supplies/SF-Series™-Premium-Individually-Sleeved-PSU-Cable-Kit---Black/p/CP-8920202
What does the generation part mean. Is it like the revision of the cable. So it's on its 3rd or 4th version since release type thing?
Anyone have experience with LinkUp cables, or is AsiaHorse pretty much the general suggestion?
Anyone? 😅
Just whatever the graph tells you for your power supply it's corsairs weird naming, they list all the ones that are compatible
Probably fine, extensions don't require much just a straight wire lol
The confusing thing with this kit though is that it says in the "features" part "Designed specifically for SF Series power supplies but is fully compatible with CORSAIR Type 4 PSUs including the RMi and RMx series."
When i look at the compatibility list it shows the the 24pin, 8pin and PCIE as being type 4 but then the SATA as being type 3...soooo, slightly confused by that
https://www.corsair.com/uk/en/Categories/Products/Accessories-|-Parts/PC-Components/Power-Supplies/SF-Series™-Premium-Individually-Sleeved-PSU-Cable-Kit---Black/p/CP-8920202
I read on there that type 3 and 4 is the same for everything except 24pin, but I'm on my phone and the website wont show fully
I'd double check but I can't scroll to the right enough on my phone browser, darn it
If thats the case then these should be perfectly fine
https://www.corsair.com/uk/en/Categories/Products/Accessories-|-Parts/PC-Components/Power-Supplies/premium-individually-sleeved-sata-cable-type-4-generation-3-config/p/CP-8920186
RMx column is what I'm looking at
Right, so type 4 for 24pin & either type for other stuff. Idk about any gen 3 or 4 though.
Ok then cool.
Sorry for being so annoying with all the question. It might seem like it's all obvious and stuff but i just want to be 100% certain before i do hit buy on these things you know
Idk what SF ones are but it says Type 4 rmx compatible, so might one to get. -- I hear ya. Psu cables are obviously a big deal, because they didn't design them to work with a plain "extension" or w/e.
I assumed SF meant its designed for the small formfactor PSUs 🤷♂️
All i was wanting was the SATA cables. Maybe later on i will change the main stock cables to some different colour or whatever but not right now when they basically cost the same amount as the PSU itself
If the wrong cable were to be used, what would happen?
Cause damage to the PSU/component at the other end?
Yes
SF series.... and gen 3 apparently just isn't their very newest ones is all.
The one you linked a while ago listing rmx compatible should be the ticket.
Yikes....no pressure then
That & the sata cable by itself, I think
Shame the SF kit only comes in black
SF kit only comes with 2 SATA cables. With the dumb amount of drives i have, might need to buy individuals too
Yikes. Yeah maybe do the kit instead of $18 for just 2 sata cables separately,. You have more than 6-8 drives?
Well actually, looking at the contents details i cant tell how many it comes with . It is 1 or 4
Length column says 1 x 445. Looks like 1 cable has 4 SATA connectors but then you have a 4 in the last column too
4 connctors, 1 cable. Last column is redundant & confusing
Yeahh i'm gonna need to get another one. I have 4 drives that need connectors and then i have to SATA connectors for the case fans
Oh actually unless i just use the onces that came with the PSU, never mind
Does anyone know if the lian li psu cables that have the RGB stuff can be controlled by iCUE if it’s plugged into the Corsair commander?
Arctic p12 or p14
P12 - 120mm, p14 140mm
great, thank you 
Np
You sure it's your power supply?
100 percent
Sounds like just fans ramping up mb
Hmm that's odd
ehh
Are the psus for the 40 series out yet lol
Cause if i get a refund for this I wanna get a psu that can handle the 40 series lol
With 12 pin pcie? No, you can just use adapters tho
Corsair has the 12 pin that connects directly to the psu with no adapter. You just need to buy separately.
Oh nice
What's the o11 like for building in.
Is this the case thats quite popular with people?
https://lian-li.com/product/pc-o11-dynamic/
Space optimization chassis, The O11 DYNAMIC is the combination of modern design and art. Through years of researching, collecting feedback and redesigning; We have successfully craft the best edition of the dual chamber chassis. Experience the full view seamless front and side tempered glasses like a show room. The two bolt on the steel pieces a...
Probably decent, yes that is the popular case, not because it's outstanding to build in tho just cuz pretty
If I have a Corsair CX750M should I upgrade to a RM650X? (Bronze to Gold, better capacitors). I’m gaming on Dell Inspiron i5-8400, GTX 1070, 32gb DDR4 2666, 500gb Crucial P5 nvme.
I can get the RM650X (2018 version grey) for around $40. Used
Nah you're fine, when you upgrade gpu then I'd consider a better model, but you can get bitfenix formula 650w for 50$ new :p
Bronze and gold mean nothing when it comes to quality btw
Hi peeps. I am looking at the EVGA Supernova 1000w G6. Good? Any others I should consider?
Also, can someone recommend some cases? (i9-12900K, MSI EDGE Z690, NVIDIA 3090). I don't need or want anything flashy. Just something solid with good airflow. Haven't decided on cooling yet but likely 360mm or 420mm.
It's pretty decent, but price wise, leadex gold can sometimes be priced better
Could go with p500a
Getting info in cooling thread, lol. Somebody had a message in 4-5 different threads
(360 or maybe 420mm rad...)
Let me see if I understand you. You are saying the components inside are the ”quality” and the rating is just the % your supposed to get with the watt number? So a better components 80+ white is better than say a lower components 80+ gold? Does that even happen though? Usually better insides of a psu are already higher 80+ rating right?
There's gold rated power supplies that literally exploded under load. It's just an efficiency rating related to the AC - DC conversion.
Typically a higher rated gpu will have better components but that's not a rule, just a trend.
I see! I don’t think my CX750M has anything to worry about with i5 8400 and 1070. Being stuck with prebuilts…lol that’s a whole other issue! Lol
CXM is a decent series, it'll be fine
Copy that Sir!
what budget and country?
also what price is the G6
Came across the LL O11 air mini and kitguru reviewed it. Look at the 280 rad trying to cool gpu & cpu (11900K).
- i'm liking this thing.
What’s in that small tank thing?
The pump/resivour
I see, but what kind of liquid is inside ?
milk
??
j/k is distilled water with a dye
Google is telling me water. It doesn’t look like water
Oh okay. Why would someone gn through all that trouble. Wouldn’t an all in one cooler be easier and take up less room?
sure, but what about the GPU?
also, if one were to try serious overclocking, one could fit more than 1 radiator to help with that, whereas AIOs only come with 1 360mm radiator maximum
Oh I believe you. I have never seen a pc with a resovoir tank in person.
1 420mm *
pardon me, 420mm 🙂
Why would you steal a word from someone
Rude
Bruh
True bacca
Chew bacca
Izza pun
Do note, coil whine tends to be common on CX-M, really annoying but not harmful, otherwise it's a usable PSU
It was a EK cryo-something or rather, chosen partially because it was white (for contrast)
Lian Li's SP 750 is in the "Low Priority" tier, what does that mean for this particular PSU?
why distilled tho
that thing will end up corroding after a while
very unfun
unless the dye has some kinda antimicrobial thing
yes, the water has aintimicrobial stuff in it
Distilled would be better than non-distilled. It's for short term testing, if that. Just like I flush my truck with it sometimes then do the actual coolant.
Anyone know if a NH-D15 will fit in a fracture Torrent case?
Yeah, wouldn't buy an nh d15 these days tho, price to performance is meh, I'd get an arctic liquid freezer ii instead if you aren't carrying it over from a previous build
For torrent, d15 and other air coolers will prob be a better idea
I suppose yeah
Okay, Thank you!
Just a torrent thing though, freezer ii does perform better
And next gen d15 is supposed to be coming later this year
Guess they pushed it back more
Ohh cool
A year ago, it was supposed to come q4 last year/q1 this year >:(
Sadge
I imagine the engineering is difficult, trying to top what they already have. I am looking forward to all white noctua fans, though.
desk fan yoooooo
Desk fan also got pushed back an entire year
:(
And I mean, there's Noctua active noise canceling fan tech demo from like 10 years ago with no more progress reports
Just bought a set of white PSU extension cables, notice they only come with two 8pin connectors for PCI-E… do I need to buy another set… (ezdiy brand)
if your GPU requires 3 8 pin power connectors, then you iwll have to buy another set, if you cant buy the single extension alone
Thanks yeah… shoot I can’t even test the GPU on my current PC… only got 8+6 pin from PSU for my 980.. have to literally build my new pc
you could always just run the one 8 pin directly from the PSU
without an extension
wont be the worst cabling ive seen
Does the PSU come with 3 8 pins?
if its a powerful enough CPU it will
In the Torrent case, for those folks who are adding liquid cooling, are you just stacking a liquid cooler on top of the 2 fans in the front?
You'd be moving the 180mm fans to the bottom and placing the liquid cooler on the front. You can use the included 140mm fans that are on the bottom by default if you want, they're pretty good.
That makes sense but if I do that it feels like I am sacrificing the air flow benefits of the Torrent and should prob go with the Meshify 2 instead.
I did see some Torrents setup with a radiator sitting on top of the 180s in front and on top of the 140s on the bottom. Not sure if that gets you the best of both worlds.
Any good cases with a handle that will fit a 360 AIO? Just looking for an easier way to move my pc every third day
otherwise average and expensive case, but the cougar panzer max has handles
may I ask why you are lugguing your PC around?
like an atx pc or micro or itx pc?
if youre doing itx this can accommodate a 360mm rad but theres no handle. most cases that do have a handle normally only do up to 280mm
this one is a 280mm
if its a bigger case for an atx, be weird trying to lug that around
if you do need or dont want to downsize, there are some cases like this asus tuf gt501 that has straps on them
Cooler Master HAF EVO XB is 1 I can think of that might be less awkward to move around, it is a cube case though.
@hollow gale i take my pc to work and bring it home. I work 24 hour shifts so I can game during down time
I think an ITX build would be more suited for you bud, or even a gaming laptop?
Ya that would make sense but i was hoping for a cheaper case vs buying a new case, motherboard and cpu cooler.
I know an mATX case with a handle. Although it's fairly heavy
Silverstone's Sugo Series, since its introduction in 2005, has been the de facto standard for which retail small form factor cases are defined. The introduction of SG12 is both a tribute and advancement to one of the most revered case designs within Silverstone product Portfolio, the Sugo SG01. W...
mATX with standard PSU. Clearance for the cooler is a bit low though so you'll have to use a LP cooler can't water cool.
If your GPU is 3 fans it might block the harddrive bay btw. And cable management is a bit tough.
But I took it with me overseas and it survived so that's a successful case to me.
thats a neat little case
Yes, it fits in the overhead on planes or under the seat in front of me 🙂 very nice
Can't use your aio with it unless you have a dremmel though and mount it on the outside. would be interesting
Hey guys - I bought a Seasonic Prime TX-1000. Am I going to have issues running or am I good?
Asus Z690 Extreme Glacial
I9 12700k
RTX 3090ti (assuming I could get my hands on this)
Double loop liquid cooling (560 Rad x2, EK Dual-D5 x2)
Thanks!
Should be fine
Thanks 🙏
Sure, especially if it's just chip power.
Definitely possible idle
Alright
is my greatwall psu a bomb
idk my model tbh
i have no clue how to check
if it involves me taking it out, i cba LOL
greatwall have some pretty decent units
dont they also provide units for other brands. seem to recall they make units that corsair or someone else brands as their own
To be fair, everything about the Great Wall 500W 80 Plus PSU does look like a cheap power supply – and it is cheap – but there’s nothing that should indicate this is an exploding power supply. Great Wall’s association with Walmart here is probably hurting their brand more than the inverse, funny enough, but we’ll be digging into that today. -
damn Gpu 26.7c??
Are there any o11 d mini like cases that can have a full atx size psu? the full size o11 d are just a bit to big for my liking.
o11 air mini
didn't realize the o11 dynamic mini and the air mini were different till now.
Yep. Chilly house & a great gpu cooler. Plus, 1 bottom intake fan doesn't hurt 
Air mini has mesh front 🤘 . My favorite case since I saw it. Gpu would like 1 or 2 bottom intake fans.
evo, when?
Decent cases usually retain their price longer huh? How much could I get for a Corsair 275R Airflow.
They start at 100$ on eBay 😅
It's a white one.
Wad it a good case or are people just crazy on eBay?
People crazy, it was an okay case sure but you can get a phanteks p360a for 80$, 4000d airflow for $85-95 and p400a digital for 85-90$
Not really worth more than 60$ absolute max if they want a white case too
anyone running the o11 dynamic air mini with a 360 AIO up top with an ATX MB?
nvm, found a video that shows its not going to fit at all
be nice if the o11d mini would take a normal psu, looking for something smallish that runs cooler then my msi 110r case
Which should I get for my 3080+Ryzen 7 3700x since no one on r/hardwareswap offered a 6900xt 😢
The Lian li is low priority A on the tier list. because theres no info on it that they have. so I was unsure about it. I do like the price though a lot more 😂
eh i wouldn't worry about it either way
Hi
Ummm
Idk what to do
But
I have a power supply that had sata and sata 2
What do I connect for my hdd and ssd
Yes, that's where you'd connect the drive power cables to. Pic below is an example of what the sata power cables might look like .
You only have to use the PSU ports that are really needed. If you can, use only 1 cable like the above pic for both drives. Of course they also each need a sata data cable. These ports are near the bottom right of a mobo usually.
Yeah need to talk more before green lol.
So I use one sata cable for both ssd and hdd
Well, 1 per drive if we mean the data cable. If you have a sata 1/2 and sata 3 ports, SSD should go in a sata 3 port to not limit their speed.
Is already connected
I'm changing my power supply
I'm stuck on the hdd power
You know
yeah if you have a cable like the one I showed w/ multiple connectors for more than 1 hdd/ssd, it can just go to either of the "sata" ports on the PSU. sata 2 PSU spot is like if you had 4+ drives or something.
no prob, what's also slightly confusing is we also had sata 1/2/3 and it related to the speed of the cable mostly. That's why I mentioned sata 2/3 on the mobo. New mobos might have all their ports "sata3" nowadays (6Gbits/second isntead of 3 or 1.5 like sata 2/1)
Yeah, you could just use 1 of these and: --- my bad, if I was confusing.
Thank you God
Oh wait sfx eee
The reason I got a psu today is because my other psu burn down and I was crying thinking my motherboard and everything was dead
Reason: Bad word usage
Who are you and what'd you do to Not Pato
Lol, sips phone autocorrected pato to apron so i am now apron
Right on. Lol, perhaps not the best gif since Mr frankenstein literaly shocks his monster.
Eventually gonna find out if my spare "brand new" G+ psu is actually good. The 7-10 yr warranty is nice. A month?!!
Honestly I wasn't expecting for me to do a good job connecting the cables to the motherboard and more, I did it blind actually lmao
I was looking the marks the cables and clicked where I needed to place it


But I'm very thankful for your help
May good luck past by you
Now the hardest part
Cable management
Wooooo I'm gonna have so much fun
computer repair shop gave me a free power supply with my bios update the person who had it upgrade so it missing the power cables
what safe lenth to buy the cables i have our too short for the mother bord sata and gpu cables our not too short so i only need 2 cables
Well what PSU is it
also, what case
You have to buy very specific cables only for that model
and case is https://www.amazon.com/gp/product/B088T78MJT/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
The Eclipse P500A is a premium mid-tower case that combines high airflow performance with style. The P500A features the Ultra-fine Performance mesh front panel for optimal airflow. Based on the award-winning P600S chassis, it has a versatile interior offering high-end features such as extensive w...
@rare tapir What PSU is it?
it a dell power supply
So buy a extension cable then
But what's the model number
If the system side connectors are normal then just buy normal cable extensions
Take a pic of the label on the side, that'll tell us what you're working with
https://www.dell.com/en-us/work/shop/accessories/ac/7566?c=us&l=en&s=bsd&cs=111&mfgpid=208477&category_id=7566&~ck=bt
Search for these part numbers:
N1WJD
MD63V
JX68G
GP6MV
G2GX9
G9Y40
654MT
4NT8R
You can buy just the ones you need
The one they sell it too ahort
You can get extensions
link
Cablemod has the good stuff and asiahorse tends to be cheaper but still usable. You can find them on Amazon or wherever
found thim 13$
https://www.amazon.com/Clovertale-Sleeved-Cable-connectors-White/dp/B078WQWVJZ/ref=sr_1_13?crid=25HKWWUM3TOHS&keywords=psu%2Bmodular%2Bcables&qid=1643915325&sprefix=psu%2Bmodular%2Bcables%2Caps%2C264&sr=8-13&th=1 not sure they reach the mother bord tho
🙂
They're only extensions, not replacements. You'll attach those to the existing cables to extend them. The combined length should be good.
Anyone running a Cooler Master Master Case H500? Looks to have a decent handle and curious what people thought
what's a good budget airflow case below or around $70?
would like to replace my CM masterbox lite 5
trash airflow
is p360A better?
yes, but its over $70?
p360 has space for 2 more fans (1 in front, 1 in roof)
I think
oh, no, just in roof
is it worth to get the p500A @ $85usd?
85usd is below MSRP right
P500A for $85 is a very good deal
digital rgb version as well
Where is the p500A for $85, thought that's what I paid for the P400A.
Cougar mx330 g air, metallic gear neo air, bitfenix nova mesh
You sure you don't mean p400a?
yeah i currently got a local deal for $85 usd for the P500A
clearance sale so no warranty
brand new
That's a steal
I'd do it if it's new. $145ish usually
sounds great
ive currently got 3 120mm fans
the case comes with 3 140mm front panel fans
should i put 1 120mm on the rear and 2 on top?
Yes
Yep
unless the glass is broken, it will still be worth it
yeah just afraid the front panel IO has problems
Phanteks can probs send you a replacement one if it's broken
For like no more than 15$ I'd imagine
ah i see
then ive got nothing to worry about
now would i need a 3rd party cpu cooler or stock fan is fine for r5 5600x with this case
Honestly in a p500a with full case of fans, btw it actually should come with 1 stock in the back already, the stock cooler will be fine
stock fan is fine without o/c
the p500a digital rgb one is the one im getting so 3 front fans only
so i will be adding 3 more 120mms
P500a digital should come with a black fan in the rear
but all the reviews ive seen do not though
i think the non rgb is the one with the rear fan
yeah all good haha
I'm imagining things

Ooh
Dose not come with one in the back only 3 in frount
I realised that yeah
https://www.youtube.com/watch?v=K3S5y_uaFKQ
looks like it has had a massive overhaul... 3 slot gpu instead of 2, for example
Check prices on Amazon below
Phanteks 240MPH: https://geni.us/8Wqk
Corsair SF600 Platinum: https://geni.us/2fhudS
Corsair SF750 Platinum: https://geni.us/Dr0uxT
Noctua NF-A12x25 PWM: https://geni.us/7UGGZBV
RTX 3080: https://geni.us/ILWHYS
Hardware Canucks riser investigation: https://youtu.be/KwfAF5XjXbM
Gaming channel: https://youtu.be/gtr9O...
yea mine end up breaking puting the aio in so be care full
they replace mine for free
i see
Yo wait can I use this for my console build? https://hdplex.com/hdplex-400w-hi-fi-dc-atx-power-supply-16v-24v-wide-range-voltage-input.html
Nah I don't think I can
The highest laptop AC Power adapter I can find is 330W 😦 so while the limit hits the recommended I'm not sure if 330W would be actually okay for a 3050 and 11400f if my usage gets heavy. D: PC Partpicker says only 259W though for the estimation. so maybe?
got the p500a today
is this a decent psu?
BitFenix Whisper M 850 W 80+ Gold Certified Fully Modular ATX Power Supply
yes
its an A tier psu
should i do a corsair one instead of the one listed
depends on price
https://www.amazon.com/dp/B08R5JPTMZ?tag=track-ect-usa-503926-20&linkCode=osi&th=1
150 for corsair and the other is
100 for bitfenix
bitfenix
ok thanks
im an artist and cases bore me. looking to buy corsair 4000d airflow and customize it, any recommendations for materials and methods?
is this not the place for that lmao looked like it was
oh alright you too
A custom paint job would be easy but if you want to go for it, etched glass services are fantastic. The rgb shining through makes the image pop.
ohhh i could definitely come up with something for that
thanks!
glass might be more of a long term thing but im definitely painting
@night bear this is a warning, please respect the other people here and read the #rules
He said he was kidding. Does that count?
Please listen to Admins, Mods, and Staff. If they ask you to stop a certain action, please follow their request, even if it does not represent one of the rules below.
Nevermind. I will be quiet now.
Doesn't matter, could be lying or even if he was telling the truth that was not clear
Absolutely. Sorry about that.
Nope
you cant commit a crime say it was joke and expect to be forgiven
its happened before
to youtube prankers
Lol I get it.
Anyone use the ASUS GT 501 case that can attest to the long-term durability of the carry straps?
Has anyone heard of having the system panel connectors plugged in causing either not posting or power on/off loop?
I would say it's not plugged in right but I just moved and never unplugged those connectors. And it worked before I moved. Put the pc in the original case box and removed graphics card to avoid damage. Currently have the system in a LIAN LI LANCOOL 215 X Black Steel / Tempered Glass ATX Mid Tower Computer Case.
Lol
jokes are supposed to be funny
that was not funny
I dunno, I think your attempts at humor are pretty funny
not in the way you wanted them to be
sad kind of funny
yeah, saying "shut up nerd" in a dedicated help channel is super funny and adds a lot to the conversation
seethe more
well, they're both gone now
don't need an obvious troll duo clogging up help channels
Both troublesome whitenames. 👍
I’m not with him. Just being sassy for sec. I’m good now. Lol
Wow really?
Thanks Wegg
lmao
yikes
what pathetic specimens

the next person who comes here for help is going to be confused
Was that the same guy with another alt?
meh, can't say I'm using my time much better, currently trying to run gpupi instead of doing my physics lab
gimme those hwbot points
dopamine rush from torturing my 3070 for numbers on screen
I’m working security at an empty yard and on Mercari. Bad combination.
Big number gives dopamine, very successful use of time
true
This is a robbery, put the dopamine in the bag
Noo is mine
Yes me.
2 front and 2 back fans or 3 front 1 back for positive pressure?
3 front
for the back fan should i put it on the back or back-top of the case?
Back, so it guides the airflow through in a straight-ish line instead of trying to make it curve
okay, will daisy chaining 4 fans to 1 4pin case fan work?
the previous fans i had were directly supplied by my psu
It depends on the fans. As long as the total amperage of the fans doesn't exceed the available power from the header (usually 1A) you can put as many as you like safely.
There's a sticker on the fans that will tell you how much power each draws
thank you :)
Pato stop me, i'm about to buy a case from Cyberpowerpc
Snowblind does have somewhat of a unique feature so you do you
the weird external rad one ? ew
no
which one
Would be simpler than getting a broken Xbox
lemme have look at other options, the lack of airflow concerns me tho and doesnt look like it would fit a gpu
https://pcpartpicker.com/mr/amazon/J7WzK8 also id go with this board maybe instead of h510
Does that case just... Not have a slot for a fan
also what exact gpu will you be using
it doesnt look it, maybe underneath?
EVGA XC Black 3050
it doesn't
One reviewer said they cut a hole to get a 120mm in there
Of course this one goes back in stock AFTER I buy the H510 lol
rip
Maybe you could mod it and get a small delta fan
or https://pcpartpicker.com/product/Zvstt6/hyte-revolt-3-mini-itx-tower-case-cs-hyte-revolt3-b on its side look like better options
Ah the meme case with the handle. Points for creativity making the handle extend to a headphone stand.
wait which one has that? thats pretty funny
iBUYPOWER is now making cases in addition to its pre-builts. The Hyte Revolt 3 is a mini-ITX case that resembles the NZXT H1, except without a PCIe riser. We're reviewing it.
Sponsor: Arctic Liquid Freezer II 280 (Amazon) https://geni.us/RJBy and Arctic MX-5 Thermal Paste (Amazon) - https://geni.us/EXf0I
The Hyte Revolt 3 ends up being mostly a...
Yeah airflow won't be an issue
I mean its an 11400 and a RTX 3050 >.> I don't think temps would ever be an issue
I could probably cut holes in a cardboard box and call it a day
when theres 0 airflow it will be
Ooh interesting, ITX torrent https://youtu.be/LGFKXUuahwo
Buy a Seasonic TX 1000 PSU
On Amazon: https://geni.us/aryiquT
On NewEgg: https://geni.us/9o7D
Last year, the Fractal Torrent case received high praise from reviewers and people who have bought them for its stunning design, but most crucial airflow. But, what happens if you want it but your desk space is limited? The Nano and Compact addresses t...
Ohhh
Does anybody know what kind of case this is?
either o11 or o11 clone
If the front is glass with no fan mounts, and it has side fan mounts, its either an o11 or o11 clone
They're decent
p500a perhaps if price is back to normal
I'd like to see more cases go back to top mounted PSU, so GPU's can easily have 1-3 bottom case fans blowing straight at em. Higher-end 30 and 40 series cards will probably like that.
Top mounted PSU= no top mounted rad 
Also some cases like my Lancool II mesh have fan mounts below the PSU
I dont like the idea of a top mounted PSU because the center of mass is high
Also no top fans sad
I know the screws would hold easily but the idea of having a 5-8lb thing being above my main parts just hanging makes me nervous lol
The real solution is separate compartment for psu i think like in the o11
. I like the 011 Air Mini. Fractal has their Torrent & just showed a smaller one & one for itx. Top psu didn't bother me as much as non-modular psus in those days.
or a power brick like a laptop
Mmmmmm would need a humongous power brick
well they call it a brick, not a power-pack-of-matches for a reason 😉 😆
I got a better solution, design all components to handle 120V 
Who needs a power supply?
120v straight into the cpu
Exactly
yes! imagine the overclock potential!
on a serious note: 12VO basically means you can have an external PSU
That is true but ehhh
gives more options anyway
Liquid molten cpu 
How does 011D handle the space the PSU goes in?
I want to see like a cross section or something
For all those people who find it more convenient to bother you with their question rather than to Google it for themselves.
Like I'm looking at the product images of the case and it feels fake 😂
I know it fits stuff in there
Some of the 011 or 011D models only fit a SFF psu. 011 Air Mini fits fullsize atx psus
011 mini = only SFF
011 AIR mini = ATX
The XL fitting full size PSUs I assume
Yeah it's just visually confusing xd
I can see the ramp and I can see the PSU fit in but then I step back and go "that's not right"
wathc some build videos, its quite nice.
if you want real confusion, watch build videos of the new 011 Evo
As much as the regular and XL o11 annoy me i do think the extra chamber for psu is pretty smart
It's clever
There's more room for hard drives and doesn't it have more cable management space?
O11 evo is a gimmick imo cough cough
nah, it brings some clever ideas to the table and cleverly tackles the issue of assymetrical cases
and improves failings of the original and XL
for example, you can now get a proper mesh front for good airflow
Oh yeah forgot about the mesh front
any p500A users here
my argb fans dont seem to be lighting up
i plugged argb header in
What 850w psu do you guys recommend?
If you're in the US bitfenix whisper M at 100$ is 
oh my gawd lordy we have a genius
Nah just run molex to every component
You will get sufficient enough power to each part
what is a good intel motherboard that fits in the lian li O11-Dynamic-mini that is no more than $250?
For what cpu?
Don't buy a new motherboard for that
That fits a standard atx or micro atx board. Any B360, B365, or H370 should do. Don't buy new for that, like pato said. Refurbished on newegg or used on ebay are fine.
@sand atlas appreciate you
Pato is my friend so go away now
you came into a random server to troll someone you dont know
who doesnt have friends?
Correct
u guys think 850w will be fine 11700k and 3080? even if i overclock?
It depends on the model, like if it's anything below C tier on the list in the pins for your use case replace immediately if it's B or A tier yeah
Yeah I think so
but it doesnt matter that much unless im OCing right
I think the quality of a power supply matters no matter what you're running on it and how you're running it
CXM will probably get coil whine, but function fine
im thinking of getting a 850w since i had 3060 before a 3080 upgrade thats why i only had 850w
if 850w wouldn’t suffice i’ll probably go 1k watts
with overclocking
750 watts is OK for a 3080
A good one tho*
Txm is good psu
ye thats what i have its still hasnt let me down
as of right now using it for 7months now
well im just hoping it would be enough playing demanding title
https://www.youtube.com/watch?v=Oox5q1Sy0XE
lancool III baybeeeee!
Welcome to the LIAN LI 2022 Digital Expo!
This is Part 1 of our 2 part series. Stick around for part 2, to see more updates, new product announcements, and a giveaway at the very end!
Watch Part 2: https://youtu.be/brW-2P_FMts
Enter the LIAN LI 2022 Digital Expo Giveaway: https://bit.ly/LL2022expo
Participate in L-Connect 3 Beta Program: ht...
What's different? Also lmao why they have a BQ purebase 500 copy beside it 
Biggest change: can fit 3 360mm rads simultaneously
Other: more space for drives, both sides of the basement are now vented, wider cable grommets, easier/safer glass door mechanism, toher minor changes
oh, the RGB one comes with 3 140mm fans.. so I doubt the price will be nice
I mean p500a is 150
That's okay price for what it is
is it healthy to remove the front panel glass from DEEPCOOL MATREXX 50
so i can give my pc more air to breath
I mean if you can remove it like clip off sure
ill try to remove it and will send a picture here just to check if it will bad or normal
With a quick google/YouTube you can probs see if it comes off
should be possible, as the fans are fitted there
https://www.deepcool.com/download/pdf/MATREXX_50_Installation.pdf
wow, the manual is quite garbage
That's gonna probs help a good bit with temps
I recently got a 3080 and it said that a 850w PSU was required. So you should be good. I’m going for 1000W to be safe and not worry about any surges
750w is actually required but 850w recommended
1000w is overkill for anything less than a 3080 ti/6900xt
i mean
im going to be running a 3080 on a 650rmx
if i can find one at msrp, that is
ill prolly pl it to 90% tho
I mean it's more of a soft require
I mean depends on the model, if FE I'd say it's fine, especially with a 3600
so what if say
i was going for a 3 pin model
kekw
Good luck getting one of those for 700 kek
if its for msrp of that model i wouldnt mind
in line for a 3080 fe on my phone and pc rn
sooo
well see
Good luck
3080 FE would be awesome, no mining limiter too
should i go for 850w supernova or corsair rm 850w?
Which supernova? There's like 5
this one
G5 is B tier
RM is A tier
oh okay rm it is then thanks 🙂
Go with G6 if possible, it's like 110$ for 850w, also A tier, better unit than RM
In cad though?
No good sale in cad
ah i mean its 50$ sale i guess its not bad for corsair Rm
Rmx is better than RM right?
Focus plus gold GX another option, 140
https://www.newegg.ca/seasonic-focus-plus-850-gold-ssr-850fx-850w/p/N82E16817151188
Ye RMx is better than RM
i found a rmx white version 850w
which is on sale too same price
ill prob go with that one
RMx over RM at same price
well like 5$cheaper on rm lol
Close enough
but i can spend much lol
RMx is a little quieter than RM and slightly better voltage regulation, nothing too noticeable
Weird that the url still says fx when listing and product images are gx
RMx is just better caps, very similar platform
I never trust stock photos, they never have the right model lol
well im going to the store to pick it up im just upgrading my current psu for my 3080 and 11700k
Usually they have the old model when the listing is for the new model, but this time the image and listing are both the new model, but url seems unchanged
rn im upgrading my pc case and cooler since im using nzxt which i built my 3060 on
and psu thats prob about it
well it handled my 3060 good just not 3080 lol
im at 70 and above playing demanding games
going 4000d and x73 on it
x73 just for aesthetic
I need some advice on changing a case for my PC. (My friend gave me their unused PC tower and it's missing some parts of the case and the cable management is all over the place) I was wondering what a better case replacement would be. I also have a link to the case in question, I can take actual pictures tomorrow to show it
Is 850watts good for 3080ti gpu and i9 11900k cpu?
It should be enough but that will depend on the model of the unit
EVGA - NVIDIA GeForce RTX 3080 Ti FTW3 ULTRA GAMING 12GB GDDR6X PCI Express 4.0 Graphics Card
I tried to see the if it was compatible on pc part picker but it didn’t show the FTW3 model
It's compatible, don't worry about that
Which power supply though?
Supernova G6 is on sale right now, that'll handle it https://smile.amazon.com/dp/B099821FWG
The EVGA SuperNOVA G6 power supplies feature a new platform design, using new materials and better layout placement to achieve greater performance with extremely low ripple and noise in an even smaller chassis. With a full-bridge, LLC Resonant Rectification, and DC-DC design, the SuperNOVA G6 pro...
Ah that changes things
I didn’t think about the psu at the time I bought it
This one's a little cheaper, still A tier https://pcpartpicker.com/product/Q36qqs/cooler-master-v-sfx-gold-850-w-80-gold-certified-fully-modular-sfx-power-supply-mpy-8501-sfhagv-us
So should I return the case and get the original one or could you find a good psu with good watts
Okay thank you
Will an 850w handle a 6900xt and 5800x or 5900x?
If you're going 6900xt go 1000w
Is this a good psu?
https://www.amazon.com/dp/B0997XYF3R/ref=cm_sw_r_cp_api_glt_i_8QBRQBTY5CFA8C47PK4N
The EVGA SuperNOVA G6 power supplies feature a new platform design, using new materials and better layout placement to achieve greater performance with extremely low ripple and noise in an even smaller chassis. With a full-bridge, LLC Resonant Rectification, and DC-DC design, the SuperNOVA G6 pro...
Yes
Personally, I'd go for a 1200p2 for $170
A high quality 850w could very well be fine for years, or indefinitely, but might as well spend $50 more and have no doubts.
Why does the side of the case intended for cable management have a clear glass cover? So dumb ..
Who wouldn't want to hide that mess?
Maybe if you do a masterful job with cable management you’d want to show it off
Even if I had time for that, I'd rather hide it
Lol what case?
Fractal Design Torrent
Which I am learning is a great idea but very poorly executed. You can't fit a 420 AIO in the front (despite the specs indicating you can) because the fans on the bottom get in the way, the GPU support bracket isn't long enough to support longer cards, the screws are made out of butter and strip super easily, and the specs indicate you can put 2 180 fans on the bottom but you can't if you want a 360 AIO in front.
uhh i dont think the fractal torrent has glass on the back
It does. I'm looking at it.
That's what I meant. Glass on the left and right sides.
Sometimes cases come with multiple panels
The right side is for cable management. So the glass exposes the mess.
none of them i see have had glass back?
oh wait it does?
very tinted, never noticed that
Whatever you get on the left matches what is on the right
So if you want glass on the left so you can see your case/RGB, you get glass on the right automatically.
Looks like normal Torrent gets both panels, RGB version only has tempered glass panels
but anyway uhh just dont get it if you dont like it?
I didn't realize the panels were diff until I got it. But there's no way I could have known it wouldn't fit either a 420 or 360 despite the tech sheet without having received it.
Plus, with the 180 fans on the bottom, you can't squeeze the HD audio wire through to the bottom of the motherboard.
And I just learned you can't center the fans in the front of the case. What a sh*t show.
It's not exactly made for AIO cooling. Mostly air or custom loop.
quick question, coil whine can happen in PSUs right? and wouldnt it be constant, not only when the gpu or cpu is under load?
Coil whine can be in PSU, GPU, or motherboard, it could either be constant or only when under load
i was benchmarking a game and the coil whine was like a song depending on the load.
might be gpu or psu
psu was pushing the same amount of watt, constant 270w but the load was different depending on the scene. if it was the psu wouldnt it be constant because a constant watt demand^
is the AX1600i notorious for coil whine?
i have an asus tuf 6800xt for a while now and i just noticed it when i but my brand new AX1600i and did a custom loop with xd5 pump/res and xc7 block
Waterblock on the 6800xt?
aight, i guess ill truly know when my gpu comes back from RMA
i wish i could shared the vid from it but the chat doesnt let me
looking at psus atm, does anyone have any experience with kolink?
Which model?
as long as it can give me enough power and upgradability without exploding my pc at a decent price i should be good
Ik it's not officially supposed but does anyone know if you can fit a 420 aio on the side fan mount in the O11D XL it looks big enough to and wouldn't mind making my own holes if it can fit in that gap
Sure. You got a dremel? You'll need to cut some metal. And your front panel will have to come off.
coil whine can also be present when getting super high FPS, like 400+ during loading screens for instance. My setup is older/slower, but I eliminated coil whine (only on gpu) by globally limiting fps to 480 w/ RTSS.
oh wow, the coolermaster SFX PSU came with MUCH shorter cables than corsairs did. So much easier for a Small case. not as much slack to bundle up to keep out of the AIO fans.
Corsair sells short cables for their power supplies
I got the 12 pin gpu one, it's fantastic
its doing it from 170 fps to 400+. as soon there is a graphic load the coil whine happens
You can try undervolt to help with coil wine
or lock card to a certain framerate
im looking to put the i3 10100 and 1650S from my dell prebuilt in a nice case so ill need a new case and psu. Just wondering what you guys would recommend
I would like to be as cheap as possible while still having quality
Best Cases According to Tom's Hardware.
thanks, what about psu
there ya go
P400a and bitfenix gold 650 or 750
P400a digital* that is, if it's in your budget
If p400a digital is too much
Cougar mx 330 g air for case, bitfenix formula gold 650w but you'll also need a new motherboard most likely btw
yeah i was gonna ask in the mobo channel
What country are you in?
US
I think i like the cougar more
ty guys!
You're welcome
which 1000W would you all recommend? im looking at seasonic and EVGA, but there might be a better one out there
I will be powering a B550 mobo and a 3080 gfx
Depends on your country also 
US
any particular reason?
Lowest price A tier power supply atm
gotchya, money isnt an issue tho
okay, cool. thank you!
No probs
Where on my motherboard do I plug the light strip integrated into my case (Fractal Design Torrent)? I read somewhere you shouldn't connect LED strips to the addressable RGB headers because those are intended for fans and different voltages.
It can just go on your argb 3 pin header
The way the fans work is the same as how a strip works
Cool. Just need to screw down my AIO and I will be ready to fire up my system.
Then I need to figure out the bios and how to optimize it.
Turns out my motherboard has an RGB header (12v) and "RAINBOW" headers (5V). I think my strip and most fans are 5V so not sure what the RGB header is for.
5V "rainbow" argb is 3 pins
Classic 12V rgb is 4 pins
Corsair 5000T -if corsair made a p500a
https://youtu.be/sFTfhuqmxgY
Learn more about NZXTs full lineup of prevuilt PCs or their BLD KIT here! https://nzxt.co/JayBLDKit
Corsair 5000T Product Page - https://www.corsair.com/us/en/Categories/Products/Cases/Mid-Tower-ATX-Cases/iCUE-5000T-RGB-Mid-Tower-ATX-PC-Case/p/CC-9011230-WW
Get your JayzTwoCents Merch Here! - https://www.jayztwocents.com
○○○○○○ Items featured...

