#graphics-cards
1 messages · Page 416 of 1
I'll leave it to bacca
@sturdy storm good resource, we use it:
https://cultists.network/140/psu-tier-list/
Then don't sell it :p
once again, max 1,250 but 1,000 is my safe budget here lmao
System Builder - Intel Core i3-12100F, Radeon RX 6600 XT, Cougar MX330-G Air ATX Mid Tower
christ that was quick
I just edited the one I already had
never seen that video card
It performs a bit better than a 3060
but 8 gb isn't bad lol
this'd be my first actually custom, not a damn modified prebuilt
I mean I never really measure there lol
I just say that because why not
Do you have any leftover parts from your currently build that might be useful
Or are you the person with the 680 from earlier
yeah
Probably not then
@sturdy storm TPU chart for an idea of 6600xt perf
6600xt pog for the price
GeForce GTX 680, Intel Core i5-10400, 12 GB DDR4 Mem
This is my current PC 
Wait
idk the damn motherboard
Holup
wait
You have a 10400
this was a prebuilt office pc 
Prolly not the psu then
well the stock was a 500w but I replace that with the 650w i think
10400 not bad
Yeah
I forgor 
Did you buy it on amazon
I could just take the cpu cooler and cpu out rq and that part is done 
case is microatx
don't think that would fit an atx motherboard
hell, we had to remove the drive tray to fit the gpu
the gpu is as wide as the case is
System Builder
Depending on mobo, could see use from b560 board, but would prob swap case, ram, GPU, depending on how good current PSU is, PSU.
Hard to say if the psu can be kept or not
Doesn't know model of the psu
wait I think i know the brand, could just look at the psu lmao
Ye, just putting together a smol list
What brand?
Will also need to know model
Also can you go into system info to look at the motherboard?
Brand is a good start
If you could take off the side panel and see it, a picture would help
If its Thermaltake, aresgame, gamesmax, we know it has to go lol
I had to cut the metal bar off the right side of this GPU to fit it in my server
alright dipping that
Hey to be fair thermaltake makes some good psus :p
Rarely
it was a smart series thermaltake 600w yada yada
Modding things is half the fun
I dont believe that's one of them
Smart 80+ is yikes if not one of the other ones
System Builder
I'd reccomend replacing it
Can you check system info for the motherboard?
Smart 80+ white is E tier iirc
where would I see that?
Do you have system info open?
Nope F
Should be somewhere on the right side
Board manufacturer or smthn
Not at my pc rn
Lying in my bed staring at a phone screen eating cheetos when I should be sleeping. I think this is an all time low
anyways
nope don't see 
Baseboard manufacturer
acer 🤮
cpu-z?
Sounds like it's oem, so prolly looking at a new mobo
Yeah looks like you want a new mobo
Also just to make sure
You're 100% certain it's a 10400?
BaseBoard and System Manu. Acer
BaseBoard Product and System Model. Asp...
Ok good
runs amazing honestly
Ssd you can carry over
aight
I forget which is which lmao
Are you sure it's an ssd?
wait
Open task manager
@cerulean rover you think mp33 or just the two sata ssds
wait no I was right the first time
When did you buy them?
ssd came with pc
hdd came with an old laptop I moved from and to
Alright the hdd is kinda useless
lmao
Ssd you can carry over, you have two options from how I see it
1tb ssd (faster storage, more reliable) for $75
been used for like 7+ years
Or 2tb hdd for $50 (slower, dies eventually)
Ssds die too, just harder to kill
Longer life span
Kk
What were looking at rn https://pcpartpicker.com/list/8LLgbK
System Builder - Radeon RX 6700 XT, Cougar MX330-G Air ATX Mid Tower
god I definitely don't need a cd-rom on a pc
this one came standard with one lmao
If wanting to save money, this gpu instead https://pcpartpicker.com/product/DgFbt6/asrock-radeon-rx-6600-xt-8-gb-challenger-d-oc-video-card-rx6600xt-cld-8go
plus the other parts in my current lol
really saving here
Ye
might save and also swap to the amazon version since I normally use that to buy parts
or will anyway
I once tried to build a pc purely off amazon
619+ on amazon for the 12g one
It is a terrible idea
oh lord
Please don't repeat my mistakes
i'll
avoid that
Anyways, you can also sell some parts from the pc that you're "scrapping"
yeah
Mobo case together for like 50-80, ram for $30-40, psu for $20 or so
eh yeah
swapped the vid card to the 8 gb since I don't do much too intense
should be fine
can use the memory from my system, it is removable iirc
has to be idk
What?
i am slow tonight
not the mem I am stupid
And 16gb kinda needed for gaming now
meant processor
Yeah cpu is removable
looking at 878 which is good
also what happened when you did it, curious
I would've ended up overpaying way too much
A friend saved me from that
Though I then ended up buying a terrible pre built that I had to rebuild
And then spent too much on that
If you want more performance out of any electronic, like tinkering with electronics, and you buy a prebuilt, you are doomed to rebuild at some point
I would always check to make sure the seller is a high rating or from amazon.com or something lol
if I would anyway
The issue is I didn't get more performance
You still were looking for it
that’s not the main problem here, but that’s still one thing to look out for
died ? lmao
I may just buy from different websites at this point
And not what it was supposed to be
and maybe swap parts to and from
The case was oem and only fit the mobo (that was dead)
The heatsink was worse than a stock amd cooler
I started with a prebuilt too. I traded my PS3 for my buddy's Phenom PC. I'm finally at the point where I think all the parts from that are gone.
Newegg is okay but if you use them, ONLY BUY FROM shipped+sold by newegg
yeah I know
Or trusted sellers...
*or well rated sellers
I usually do a similar thing if I buy from amazon, only choose amazon.com and whatnot
some other sellers are ok like corn, and high rated trusted sellers.
Yes
I am too slow at typing lmao
Korn? Rata rata pea rata oo
Also if it's the manufacturer selling direct through third party
That works too, but don’t get sucked into fishy deals from third parties
End up with a lotta trouble and frustration
tons of people end up here complaining about it
them: I bought x item from newegg! it’s not shipped and i can’t refund!!
us: third party seller? 
i'll choose the cheaper option from all of them and make sure i can trust it yada yada
If it's the manufacturer they're usually well rated at least. Arctic sells direct for example, they've got like 20k ratings
see already good news because bacca was smart about it 
might want to make an account real quick
so I don't lose the damn list
design
the amazon parts I can take advantage of prime
the rest on newegg I can take advantage of the newegg sold thing
and this
hey 8 dollars for shipping does not add too much so whatever
The shipping prices are included in the total on pcpartpicker
Only thing not are taxes
oh yeah ikik
taxes to b a b
gonna add the amazon items to a cart so I can quickly get those bought without finding them for a few minutes 
please stop trying to get me to spend money i do not need a thing for a few years that i forget about and also lose money
Amazon lists work well too
always check the rating alr alr good good
i am about to stab you
now for the other three item cart
not again 
I love it when they used to FORCE ADD protection plans
"Click ok to accept 2 year plan!"
tiny print on the bottom right
"clicking decline adds a standard 1 year plan for $9.99"
The tiny X on the top right that's the same color as the window was the only way to skip that
So glad they don't do that anymore.
Except Dell
Yep lol
thanks guys lol
waiwaiwait
might want thermal paste
just in case the original one sucks
If you're getting a new cooler they usually come with some
which it will
And it's good enough for a midrange cpu
I think I can just take the same cooler my processor uses from my current build and move it to my new build
10th gen core i5 :')
Yeah if you're trying to transplant the cooler you'll need paste
yeah
MX-4 is decent and cheap
gonna have to find another monitor if I don't wanna keep using a whole television meant for other entirely unrelated things
lmao
doesn't bother too much
MSI Optix G241/G242 is a good 1080p 24" 144Hz monitor for $180-190
and I use a goddamn roku tv, 4k60 
I mean it is 4k, which I never use 4k because it hurts my 680
yeeeaa
I rlly need a monitor anyway
because i hurt my neck constantly looking at the bottom at this lol
Get good, Bryce
Do u guys know how the cooling fans work on the rtx 3080 FE? Does one fan sick air in and one blow out, or do they both suck in?
Both fans blow the same direction, the right side fan blows through the heatsink and up
What's the main difference between dvi-d dual link and dvi-d single link?
Bitrate? Max resolution? Colors?...
It's just extra bandwidth for higher res
Ok, i thought it also had less colours but apparently they're the same
Single link is a bit old & obsolete a while ago. Even my gtx 660 has a dual link dvi port I think. Really just handy to do "normal" use w/ a 1080p or maybe 1440p screen.
what should i look for if im getting a 3070
Wdym
like i was looking for them and found a lot of different types
Look for anything that isn't ventus 2x, and aside from that the cheaper the better
For the most part
Price to go for on the 3070 is currently $650 or less at retail, you can get a 3070 ti for $700 easy
Assuming US
3060 ti also consistently avaialble for around the 600 price point
fairly often lower
and is like 10% worse than 3070, so pretty close in real world perf
10% is 10%, but yea 60 ti is often enough $550ish while 3070 is $650ish & 70ti is often $700 (asus tuf)
The Gigabyte Eagle OC model 3070 ti is also $700
Anyone have that post where they said the 4000 series cards would require 1000w+ psu's and iirc they mentioned needing a 1500w psu for the 4090
It's all just rumors right now
Current theory is ~500W 4090 that overclocks at up to 600W
Hmm could possibly be, but i wouldn't doubt it if it was actually true lol
you can bet on max 600w for any card you would reasonably purchase
Well that's just gpu alone correct?
yes
Correct
but the rest of the system sips power for the most part
So if you pair it with a 12900k that's another 300W to account for
Which is where the 1000W psu thing comes in
Well my 5800x uses like 100w alone
That's nothing compared to the gpu
adding in all the lights and stuff add another 100 😛
Yeah of course but it's not impossible
Probably not 100W for fans, LEDs, and drives, but if you have a lot maybe 50-75W
I run a 011 dynamic razer edition, razer taichi b550 mobo gskill royals sl120 lian li fans and a kraken z73 literally everything has rbg on it lol i mean thats no 300w right but it's still a lil taxing
I run a 2070 super on top of that and i run a 1000w psu so i should be good assuming the newer gpus dont require some crazy wattage
If you go to the 4070 (which is supposed to be about equal to the 3080 ti/3090) it might be 350-400W so 1000W psu is more than fine
Hoping so lol thanks Fal 😄
Not too bad yeah
Make it 2 3090 tis and you got a deal
It doesn't matter that I'm an alcoholic right? /jk
I just sold the 1650s I got on b stock yo someone, the serial number sticker is partially on the gold pcie things that go into the pcie slot
Is that normal?
^
Well
Maybe delete it @hasty sphinx
People can steal warranty if they want to be word I can't say
oh right
good idea 😛
i would try to peel it off and stick it up higher
but it might be a pain, i dont think those stickers come off very nicely
may need some sort of solvent to pull it up
It's working right now
i think your best bet would be to just stick the card in and see what happens
I just got everything put back together
so quick querstion though.. Do I download the drivers from the evga site or from nvidia?
oh how do I check the bandwidth
gpuz would show it
Nvidia
Would also just run a bench to make sure perf is fine even if bandwidth says it's fine
it should be x16, but it could potentially only be x8 should the pins farther back be covered too much
i thought the contact point was farther up the pins
so only having the lower third on some of those pins exposed might be an issue
am I looking at bus interface?
let me update driver real quick
it's reading as a microsoft display adapter lol
driver date of jun 21 20065 lol
2006*
lmao yeah fix that first
Oh alright cool
It'll be fine then
ok cool
so the x4 in the bus interface should say x16?
yes
the card is x16 3.0 running @ x4 3.0
oh ok, and that's probably because the sticker?
What motherboard is it running on?
Most likely the sticker though
mag tomahawk z690
Def not the mobo then
It shouldn't hurt perf that badly, maybe like 5%
Since it isn't a 6500xt
ok. It'll only take like a minute to pull it out and take teh sticker off so I'll try that once I'm done eating
I dont think it'll come off in one piece
the sticker came off super easy, I put it just above the connectors.
I'm not sure what x16 1.1 means though
huh, it's fluctuating between 1.1 2.0 and 3.0
oh ok clicking the ? next to it explains it.
It swaps version cause of different power modes
yeah
Should've ran timespy before & after. I wouldn't have even tried the card w/ the sticker on contacts. 
I'm a noob 😄
Learning is good. 
Reason: Bad word usage
Nice. Surprised it came off in one piece
it wasn't even that sticky tbh
the dollar store labels I use for my vape juice are tonns stickier than this sticker
I thought it'd come off in pieces with like residue left over
How those types of stickers normally do on pretty much everything like them
I thought someone at evga messed up with that sticker placement or smthn lol
Tbh usually SN sticker is literally just slapped on the back somewhere. Perhaps Ray Charles did that card for ya.
So far this has been stable for almost an hour now
that mem clock way too high
for it to be stable it has to be udner stress
What model of 1650s?
run a benchmark, if it completes then its stable
I did run a benchmark
ok I'll grab it and check it out
says I have to own 3dmark to get the benchmark adddon
one sec
theres a button for it
ill take a ss after tjhis game
its under 3dmark demo
when you click on 3dmark demo, its on the right side
@hasty sphinx
alright thankjs
np
theres a few other things, but they all have to do with the benchmark
oh ok
Isnt it also on 3dguru or smth?
?
theres a download link online, if thats what you mean
just easier to use steam. The site its one has like five different download buttons, most of which give malware, spyware and viruses
the one that is pinned in the overclocking channel?
Wat? 3Dguru has five servers for 3dMark, but that's it lol. Non of them are dangerous
prolly a different thing then
the one pinned in the overclock channel has a few dl links as well, but one of them wasn't working for me
Overclocking pinned is Techspot, never heard of them so I wont comment on it. I've used 3DGuru for bunch of random things before and I never had issues, tho I always have had an ad blocker of some sort so maybe they had bad ads at some point.
ah yeah diff thing
20 min left to dl I guess
the oiverclocking videos I've been watching one guy says that most people report being able to run 1500 extra mhz on their 1650s
but we'll see what happens with this timespy thing
I assume it's a better benchmark than heaven?
that is not normal at all
timespy is actually accurate and updated, unlike heaven
ok
Also afaik 16 is like 20 series, it doesn't outright crash but error correcting on the memory just impacts performance. That's why running TimeSpy various times while increasing clocks is a good idea. Heaven is outdated. Superposition is better, but TimeSpy is preferred by most.
ye... perf will decrease, but its unlikely to crash
well, tbf
my 3060 ti crashes when i put mem over 1100
I did crash when I had the core clock at 150
but it increases perf at 1100 compared to anything lower
core is diff from mem
it has auto correcting mem oc
so I dropped to 125 and it hasn't crashed yet
not core
core also increases in incriments of 15
so youre actually running it at 120 rn
150 was actually 155, 140 could be stable
but wont know till you try
this was my hard limit for ocing
wait
no it wasnt
i got +210 on core
wrong afterburner preset
there we go
@keen nacelle
maybe I should try to beat the worlds best since it's like 30 points away
Make sure you're looking at gpu score and not overall score lol
that's the 5113 right?
in the 2nd pic
so getting through the benchmark twice it's safe to assume that my oc is stable?
Yes
Probably
I mean could still crash in some games yeah?
It can
the guy in the video I watched said that is where profiles come into play
I can drop frequencys a bit for the games that do crash
so just use that profile for those games
Eh just do 1 that's stable in all
yeah makes sense
I am looking at the Radeon 6600 graphics card is the msi 6600 any different than the XFX 6600
Idk if TS is really the best for finding stability. I know it isnt for GPUs with large VRAM/DXR support as there are quite a few better options.
get whichever is cheaper
@keen nacelle I figured that was the case thank you
cheapest 6600 in stock rn
https://pcpartpicker.com/product/qJZ9TW/msi-geforce-rtx-3050-8gb-8-gb-ventus-2x-oc-video-card-geforce-rtx-3050-ventus-2x-8g-oc also an option
though it is ventus
and 6600 has a bit better perf
actually this is the cheapest
oop nvm wrong gpu
Low end models are fine with Ventus 2x, like 3060 and below tier. Maybe 3060 ti if you have a good case and airflow.
I know, but the 6600 is the same price and has slightly better perf, and will have better temps
You can pretend all you want but that's what half the people using nvidia reflex will use it for
is a 2060 super gaming X (used no box)+600 worth it for a 3080 FE with box and everything and it has been mined on for 2 weeks
or the same 2060 +350 for a 3070 ti FE that has been mined on
both are good trades
isnt it bad to get a used GPU
not really
cuz like if it fails im screwed
theres a warantee
depends on what the person before hand was doing to the gpu
otherwise its really not that bad to get a used card
my card ive mined on for 1 year is perfectly fine
for mining, assuming they know what theyre doing; a used mining gpu is better than a used gaming gpu
yea but like what if they screw me over
how so
like asus has screwed me over, i know this is nvidia but still
?
my monitor broke and retail is like 230 and then they sent me a bill for 340
and i got it shipped back to me
i didnt pay the 340 obviously
well that doesnt really give us much info on what actually happened
the monitor out of no where started having lines
i sent it in for RMA and then they sent me a bill for 340
lol
also for used stuff depends on where you buy it from because you can have buyers protection like ebay or just straight up through paypal
if its in person, then youd have to just try and trust the person
its not ebay, its through the fixit discord server
yea im meeting with a person
like an experienced miner
if you get proof of the card working and stuff then you should be fine
the only thing stopping me is my mom lmao since im a kid
LTT did a good video on it https://www.youtube.com/watch?v=hKqVvXTanzI
Thanks World of Tanks for sponsoring today's video! Use invite code TANKMANIA at https://tanks.ly/3w3Wx7B and get the Excelsior Tier 5 tank, 250,000 credits, 7 days premium access plus 3 rental tanks for 10 battles each
Between scalpers and cryptocurrency miners, its been really tough to buy a graphics card. But soon, we could see a flood of us...
an ex-miner gpu if well taken care of will only at worst have dried paste or broken fan
fan is pretty cheap and easy to replace tho
Although part of the worry could be much lower lifespawn since a mining card is usually on 24/7 and a gaming card isn't, even if a gpu usually lasts long enough to become "obsolete" (in other words actual lifespan isn't a huge concern)
It's using less power during mining and doesn't get as hot so not as much stress as gaming at full/OC power
Nah, lifespan being lower is a fud
Gaming is actually more taxing on gpu
Cause of heat cycle
The only thing that wears down on a mining card if it's not abused is the fan
would be good if miners deshrouded then used 120/140mm fans for a while. 
They just put external active cooling on em most of the times
Like an ac or a fan
I'm a little sad how people thinks mining damages gpus
Probably seen bad examples
People loves to make mining look much worse than it is
Eh it's not exactly the best thing, running many gpus 24/7 using power just to make some money back. I wouldn't ban it though. Sure wouldn't say no to a decently priced ex-miner card either.
It doesn't hurt if the source comes from green power
Besides I was just talking about gpu wear
i’m rocking a 1060 3gb what is a good upgrade?
3060 (ti) sure would be, or even as "low" as a 2070(S). Really it's all about budget/patience, but quite a few cards are an upgrade for ya.
Speaking from experience even the 2070 will get you about double fps in some games
About equal to the 3060 for newer model
Im having issues
with what
do you know what this is caused by? not the startup screen, just the obvious pink lines
it seems like a gpu issue to me but when I restarted my pc it just went away
that looks like gpu artifcating, could also be caused by monitor or a bad cable
or a cable not fully plugged in
what's artifcating
artifacting* sorry typoed
oh
basically when the gpu is on its way out
sometimes it can be fixed with an underclock or power limit
well
so basically
these lines didn't happen before
what did happen and still does
is uh
my computer just crashes out of nowhere
it's not mine I got it from a trust worthy dealer who sold it second hand and it was originally used for like 2 or 3 years
and it looked very good in condition
and it was totally fine when I got it
which was just a year ago
I got my pc a year ago roughly
slightly less than a whole year but yeah 10-11 months
that aint even close to a new gpu
and now my display just went blank
I know it's not new
could try underclocking it if you can get it to boot
make sure cable is fully plugged in
how much did you pay for it?
around @keen nacelle 130$
couldve gotten a 1050 for around the same price :p
i didnt know much either when i bought my pc
made a lot of mistakes
so i get that
well idk what I'm gonna do now
could try the gpu in someone elses pc to make sure thats the issue
I had this issue before too
I took it back to the guy
and he had it repaired somehow
and took like 20$ for fixing it too
some people know how tof ix gpus
but it was fine after that
but i wouldnt put any more money into that card
it just started happening again though
true
I literally got it repaired like in December last year
nice
Good? 225 or under . Market I think is around 275-300 without actually checking
oh what
I could be wrong on that
I don't feel like pulling up ebay to check
Eh
it’s still a 1070…
PayPal g&s protections
ah yes
I wish I could still use hws
Do the usual due diligence and check scam lists
Annoying that I can't
Why can’t u use it
Reddit banned all of my accounts and won't tell me why
And won't accept any appeals
Nah like use RSS feeds
But whenever I make a new account it gets auto banned
and an external website that reads rss feeds
What is that?
google it
Rss?
it’s like news feeds
Would be easier/better to just use a VPN and make a new account
If I need to sell anything I can also use my brothers phone and account
Just can't check throughout the day for decently priced things I might be interested in
whats best gpu?
For gaming? We have a tier list actually https://imgur.com/a/WZBresN
It needs to be updated but that's still fairly accurate
Best for the price for gaming currently would be the 6900XT at ~$1000 USD
Oof that's very overpriced for a 6600 non xt
What's the vertical scale?
Obviously higher is better but is there any sort of metric?
There isn't really one, gaps are mostly left to show larger differences and leave room for later GPUs to slot in
How tf is a 30 series worse than a 20 series and a 10 series
Because that's how generational increases work
980 ti actually has similar perf to a 3050 too
So does 1070 and 1660 super
3060 is similar to a 2070 and 1080
But 3060 only has the ray tracing right
2070 has rtx too
Only 20 and 30 series have rtx
But rtx is kinda a waste anyways
It tanks fps usually for not much you can notice
Yeah it's not well implemented in most games
It's a great concept but the trick is to use it meaningfully
I dont like that concept
You basically pay less for a better perfomance
Wait no thats good
Would you rather have the lowest cards of a new generation beat the best of the last, making everyone feel like they need to upgrade every 2 years?
True
It allows performance of similar tiers to be cheaper
Shortage prices aside, 3060 ti gives 2080 super performance at $400
And 3060 gives 2070 performance at (supposedly) $330
Well I havent seen the chart yet but now im not sure if I should stick with a 3060 or get a 2080 ti since it is cheaper
Where tf are you seeing a 2080 ti for less than a 3060
Nvm it was a sketchy ass website
Are you in the us?
Yes
https://pcpartpicker.com/product/wD8bt6/msi-geforce-rtx-3060-12-gb-gaming-x-video-card-rtx-3060-gaming-x12g cheapest 3060 atm
And $570 3060 ti https://pcpartpicker.com/product/89BG3C/msi-geforce-rtx-3060-ti-lhr-8-gb-ventus-3x-oc-video-card-geforce-rtx-3060-ti-ventus-3x-8g-oc-lhr
Next jump would be an $800 3070 ti, which imo 3060 ti at 570 is much more worth it
Then a 1k 3080 12gb, which is pog
Though 6900xt is also 1k rn
6900xt asrock oc formula actually consistently beats 3090 when both are oced
I'm not sure which comes out on top without ocing
The 3070 ti has been $700 lately
And the 6900XT slightly beats the 3090 at 1080p, matches at 1440p, and slightly loses at 4k
That would mean that your 250$ cared from this gen would beat out the 1500$ card from last gen that would be crazy for one and basically impossible if amd/nv weren't artificially limiting how good their products where each gen
This RTX 3090 Ti has five fans in total A Japanese prebuilt-PC maker announced the availability of a new GPU option: a water-cooled GeForce RTX 3090 Ti. The RTX 3090 Ti G-Master Hydro series is the new option for the Sycom prebuilt systems. The company offers a wide range of liquid-cooled GPUs, which usually feature […]
Lol
lol
You gonna buy it?
If that's an asetek like it says in the title then you can't bottom mount the rad. That's an immediate no from me.
ofc /s
mm yes thats the issue
Right? 100% the only problem I see
Don't be hating on Noctua fans, that's their signature. You take one look and see exactly what brand it is even without a logo.
meant the ones on the gpu lol
Ohhh gotcha
Yeah they don't even have any of the modern touches on those like vibration damping or the center fan being reversed
Mainly clear fans & copper windings showing, lol. I'd deshroud that instantly & throw on a couple more Noctuas to match the others (perhaps 140mm fans)
140s would be too big for most cases unless you do vertical mount
And having the fans bigger than the heatsink means bad pressure
That's why we have such weird fan sizes for GPUs like 88mm
What should the "normal" price be for a basic GTX1080 waterblock?
Not worth water blocking a 1080
Custom loops spensive
Although if you need, because heatsink not available anymore there's the nzxt kraken adapter
1080 block would be $90ish probably at least, of course not really worth it
Used blocks are cool. Should be like $50 - $70
hey guys, I'm moving to a 2-pc streaming setup. I already have a gaming/power pc and currently building my stream pc and don't know which GPU I should need to stream with. I already got a Elgato 4k60 mk.2 available, but I don't know what is the best budget GPU I can get.
You're better off using the CPU for encoding. It's slightly less ideal but far cheaper.
yeah, tried it. not the best quality so far for a 3600
Well if you're stuck with a 3600 there's your problem 🙃
Something modern and cheap like a 3050 would be fine. It'll have the nvenc encoder.
Might be able to do a 3060 in that budget if you wanted but shouldn't make a whole lot of difference.
should try that. gonna yoink my friend's 3060 for a week to try it out
3080 FTW3 10GB - $843.89 (Associates Code) (EVGA $869.99 - 3%, free shipping with ELITE membership) https://www.evga.com/products/product.aspx?pn=10G-P5-3897-KL
lol

this is what happens when 90gb windows install
this is fine
oh ffs
Windows had made big page file on c drive
so much better
Don't forget powercfg /h off and delete hiberfile.sys from the root
oh true
That'll reclaim a couple gb too, how much depends on your ram size
Yeah I leave mine at 800MB and call it good, that's the minimum for blue screen dumps
i just let windows go nuts with the page file on my downloads only hard drive
disabling hibernate freed up like 12 gigs
bruh what is microsoft smoking
37 gigs of swap and hibernate on a 85gig install?!
Like bruh it's not 1995 any more
The GPU crisis is over??

why is your c drive 85 g b
rest of the 400GB went to linux
O
Follow up question: why does your Linux need 300gb? Mine uses like 25 with the /home on a separate drive.
Indeed. It's over imo when the majority of aib cards are within $50 of their respective msrp's. 
Think they mean including files because ik they need like at least 200gb worth of stuff for the rom
its prob going to last until or just near the 4000 series drop
thats my prediction
It's no longer a crisis but it's not back to normal yet
ye, and I think it'll stay this way until next drop and then the NEW crisis will start ;-;
We're at the point now where some people have decided to wait for the next gen. It'll sell out fast but not as bad as June last year lol.
so what i do with mining is spend the profits on upgrading my pc
do you think my next upgrade should be cpu, mobo and possibly ram or 4060 ti/4070?
im thinking cpu
but idk
It depends on what you play. I play stuff that's CPU heavy so I'd go CPU.
mix of both
a lot of val but im not really worried about fps for that lol
im stuck in the mindset of "if i have the chance to upgrade why not" since the money from mining isnt "real" money to me
maybe i should grab an m27q first
Then I'd hold out for next gen, whether that's the CPU or the GPU. Both should be a good jump coming up.
Yeah 3060 ti should do 1440p high refresh well enough with respectable settings
If I plug my second monitor into my iGPU, will that monitor run games off that instead of my dGPU?
be aware that the high end gpus will launch first, xx60 and ti series maybe mid to end of next year
nvidia milk the big bois first
3060 ti came december, 3 months after 30 series launch
maybe 3 and a half
true, then maybe at the end of the year maybe
ill be saving up anyways
i will skip this gen 😛 im happy with my 3060ti, im pretty sure it will hold its own for some years, at least at the gaming level
pretty happy at 2k
what should i get RX 570,Ryzen 5 5600X or rtx 3050 XC,i3-6100?
whats your budget and where do you live
400$ i already have i3-6100.rx570,,i live in Saudi Arabia
of you alreday have those, no point in buying that whole new pc unless you can sell yours for $300 or so less
i know but i want to upgrade should i upgrade the gpu or the cpu
cpu
oh that was fast
what gpu should i get for 400 ?
english only server oilucian
Hey I was wondering how people “mod” the Evga ftw3 cards into being white
Is it like vinyl or is it smth todo with painting the shroud and does it void the warranty
They take off the shroud and spray paint it
I've heard people also plasti-dip them iirc, that way they can return them to the original condition
although maybe it's a different method people have used? But you can avoid spray painting to not void warranty iirc
Plasti-dip for the shroud is really common yeah, it's easy enough to take off and mostly flat so it's a good candidate for that.
Yeah white plasti dip I feel like I remember people saying it works on that
Istfg some people are so stupid
My friends doing +1650 on his mem on his 1650
And won't listen to anything
Willful ignorance, don't waste time on those kinds of people
Used to do +1350 on their 1050 ti... that died
I wonder why
Wait now I’m scared, if it’s stable it’s fine right?
Define stable
Because stability can be measured in several ways and has different meanings
stable for me = doesn’t crash and does not artifact during the specified tasks
Like for me it’s mining and does not crash
Mining stability can be tricky. If it's too high it might just lose hash rate instead of crashing. Also I've seen a mining overclock crash file explorer but still be fine mining.
I have my 3070 ti mem set to +1200, raising it is not stable and lowering it decreases hash rate
That's about right for GDDR6X
Mining profiles are finicky
Windows is also finicky in general
💩
Ew are you mining on Windows
on the topic of mining, its normal for 3070ti mining just ETH to be more profitable then mining ETH + ERGO
It'll vary by the market but yes that'll often be the case
Eth and ergo both use mainly vram, so doesn't make sense to dual mine those two
i dont have enough to do eth + rvn or eth+octo
Good good good
Eh, full $200 more than the non ti often is lately. Try harder Newegg
Things are improving no doubt
Wow, finally getting to noemal
2 years later woooo 
Where's your GPU upgrade smh
Also how's the jump to 16 threads from 4?
Pascal still good at 1080p. At this point probably will do 40 series or wait for 3070(ti)/80 to drop another $50ish. As for cpu, 8 to 16 threads since I've had the 3770 instead of 3550. Tbh been busy & obviously got a final 3rd m.2 ssd in the mail right now. 
3080 12gb has been going for ~1k for a while now
3050 or 2060 6gb? price rn simalar
get 2060
2060
okay buying for a friend ty
So I had 2 monitors hooked up to 1650 super. I noticed that the memory was being used at 100% with a 100% uptime so I did troubleshooting and found it was my second monitor. I plugged it into my iGPU and the issue went away, but there was no display on the monitor for at least 10 minutes. So I started looking into how to use a dGPU and iGPU at the same time and as I was watching a video, bam, my monitor kicked on. A couple questions. QUESTION 1: Did my motherboard decide that it was going to be smart and just enable the feature for me so I didn't have to go into the bios? QUESTION 2: Also, what might have been causing the 2nd monitor to use 100% of my GPU memory like that?
Im confused what
which mining software is recommended if i consider getting into it?
if my older 670 can do anything good
is a seperate mining os recommended?
I had a second monitor hooked up to my dGPU. My dGPU memory was reading at max constantly. It was not fluctuating at all. I unhooked my 2nd monitor and it went back to idle instantly. My second question is regarding this.
670 won't be worth mining on
I then hooked up that 2nd monitor to my iGPU, but no display was present. I then remembered that I had to enable some sort of bios setting to allow the iGPU to be "on" along side a dGPU. When I was looking up a video to see what settings I needed to enable/disable, my monitor all of sudden started showing display. My 1st question is regarding this.
tbh i need my current gpu for adobe so no mining
It would be a glorified space heater
yeah thats not a good idea
Same with the 1030 except less heat lol
okay
theyre not bad for games or even artstuffs but higher sysreqs are getting up there
and at least the shortage died down a bit
Yeah just weird, and that looks normal it reads your current clocks since your gpu is idling it's at base clock for mem and gpu by the looks of it
Should just be whichever cable you have connected to where is the one the monitor runs off of
This is my Idle
Hmm
this is with 2nd monitor plugged in
and it won't go down
it sits at that constant
like 100% of the time
until I unhook it
No drivers for the monitor
plus I still can't get a driver for my G27Q
it still reads as generic pnp
it's running fine on my iGPU though at 300mhz.
just a little wierd to me is all
it was causing my gpu to sit at a constant 46c
Meant the Nvidia drivers, but most of the time windows will find drivers for the monitor in update
It doesn't seem to for these monitors. I've tried in device manager/vendor website
and windows update.
Fair enough
I'll look into the nvidia driver though. I didn't think about that
Nv driver was stopping me throttle cuz i had power management on performance instead of normal iirc idk why but just make sure it's not changing that for some reason
Do I want the game ready driver from the nvidia website? I had originally downloaded the driver from evga
Smh yeah get from Nvidia
shaking your head at me makes me feel like a total noob lol
Lol it's fine
I bought myself a phone cooler that actually works reallly good so this 700mb download is gonna be quick
took 1:37 on mobile hotspot
not bad I'd say
Pretty fast you must get good reception
I max out my dual band 4g+lte at 100mbps
with around 20-30 upload
and 10-15 ping
This geforce experience thing... I just launch the game from it and it auto optimizes?
Don't use the auto optimize thing
Doesn't actually do anything worthwhile
Just messes with the settings, and the target is like 1080p60, not really great
alright
Oh no... The display port... Is dead
Haha not funny
Is there anyway scenario where the 1060 6gb model with GDDR5X is better than my 1070?
Only 2 fans on my gpu are spinning ??
No. Not unless the 1070 is thermal throttling or underclocked.
Run a stress test and see if the third spins up
I ran 3d mark but it does not look like it's doing anything
Try manually putting the fan at 75% in Afterburner
If that doesn't work the fan is jammed or dead
The gpu is not even a year old?
The load is semi-important here. What really matters is temps. It isnt that uncommon for GPUs to only turn on some of their fans at meh temps.
55c
Yeah that isnt really crazy, seems within a reasonable range that not all fans would be on.
I ran 3d mark
I'd try what Falc recommended, use a fan controller (like Afterburner) to set fan speed. Also, "3dmark" is pretty vague as that is a program that hosts many types of tests, ranging from really basic to fairly intensive.
What test did you run?
The free one lol
Timespy
You only hit 55c in that? Seems pretty low.
Hold on I'll run it again
Running now. How do I get the overlay of temp
Should tell you temps after running, unless free version doesnt do that
76c right now
Much more realistic numbers now. If the fan didnt turn on then, it's damaged. I'd do a warranty claim for it
Yeah that looks more normal then the 55c stated earlier. As I said earlier, RMA it if the fan didnt turn on turning that test.
Ok will do. Ugh I'm going to be without a pc for weeks
@wicked hound Thank you for your help
NP. Hopefully RMA time isnt too long.
All good.
is the 1060 6g or 570 better
Fal! Stop being so helpful. Just kidding never stop!
1080 shooters/triple A games
1060 is better
The userbenchmark review recommended $30 to 580 or $50 upgrade to 590. But that’s the original reviews. Is it just depends on price. The 1060 did have higher specs
also don't use userbench for guides tbh
Especially the GDDR5X version of the 1060
It wasn’t launched?
yeah, it's not a thing
That’s what I thought to until I saw this for sale. And then read some reviews on it
that's some obscure model
it's exceedingly rare tho
Oh got ya
This was purchased for my gfs pc. She plays nothing but hearthstone and the card is practically still brand new. I will bubble wrap and ship this out as soon as I can. I do not believe I have the original box though. Feel free to message me with questions or an offer.
Thanks for your time.
thanks for the help
What’s your budget John?
well my friends dad upgraded and is getting rid of two gpus he has that are 1060s and im trading a 570+100$ for em
idk what imma do with 2 since SLI aint on 1060s
that's not that good of a deal
Hmm probably have to sell the other one. Or use it for a different build if you have one
unless you sell the other one
100 for one is easy deal
even 120 for it is fine honestly
yeah, i think imma just do that and just get the money back and save for like a 3060 or sum
What’s your cpu?
3600xt
Nice. I’ve never had a newer amd cpu so I cannot offer any insights on performance without the internet. Lol
3600xt shouldn't have any problem handling most gpus
yeah, 3050 seem like a waste rn
Oh def. Internet says zero bottleneck with both 3060 and 3060ti at 1080p
I've used 9400F on 3090 and yeah that was a decent little upgrade
@wicked hound thanks for all the help
Get rx6600xt Form Gigabyte
does anyone know how to install the radeon hd series ati hd 6770
my case has no place for its metal thingy to go into
might have to take off the little things on theback of the case
to make room for the backplate
Dremel time. My 5770 has the same blower cooler and spacer bar. It's ridiculous.


