#graphics-cards
1 messages · Page 45 of 1
Depends if you think you need more or not
Im struggling with a few games
How big of a difference would it make?
Uhhh, something in the realm of like, 30-40%, maybe more?
They shouldn't be
used ones are around $450, new is typically $100 or so more
New 6800XT is $500 rn, xfx and asrock models
neat
BRILLIANT solution to the 12VHPWR melting https://youtu.be/gQUyakr44TA
See MSI MEG 342C QD-OLED 34” OLED Gaming Monitor: https://msi.gm/SeeMSIOLEDHUB
Thermal Grizzly KryoSheet: https://www.thermal-grizzly.com/produkte/624-kryosheet
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
Buy relevant products from Amazon, Newegg and o...
If you can see yellow, it's not in all the way. So simple, yet so perfect.
PC Worlds vid also shows that tolerances are pretty bad on 12p. Can easily pull 1mm - 2mm evenly across the connector without it unclipping at all.
Some roblox games are more demanding than others and you end up hitting an engine limit before any other
Considering it's only meant to run 60 fps consider yourself lucky
yae true
Is that a PSU side solution? I haven't watched the vid yet.
Both sides, since the connector is the same on both ends
Oh interesting, can one buy the connector from them or would I need to buy said PSU for it?
You'll be able to buy the cable separately
It's for ATX 3.0 power supplies only though, since that's the one that has the connector on both ends the same
Instead of using an adapter cable
I plan to go with a 3.0 PSU just looks far better.
That's only $40 cheaper than new right now
They've been dipping down to $600 pretty regularly
Usually newegg
This is one of the best models, it was $600 last week https://www.newegg.com/asrock-radeon-rx-6950-xt-rx6950xt-pg-16go/p/N82E16814930088
Maybe $500 depending on how long it was used
Anyone know the thermal pad thickness on an Asrock 6950XT OCF?
Question, do you need a gpu to run a pc or can you run it without it
Most motherboards won't boot unless it detects a GPU in the bios.
If your CPU has an iGPU (any Intel without "F" on model, or any AMD with "G" on the model) then it will work w/o a dedicated GPU, otherwise you will need to have one installed
The 7000 series from amd also has an iGPU
What do you mean?
Intel i5 12600K has an iGPU, the 12600KF does not; AMD Ryzen 3600X and 5600X do not, the 5700G does
@balmy magnet So if it doesn’t have a f like the Intel i5-11400?
It doesn’t need a gpu?
correct, it has an iGPU
it's not going to play games as well as an actual GPU but it will get you thru BIOS and into the OS
Ight thanks
np
By the way
With introduction of Ryzen 7000 series
All of the desktop lineup in this generation will have igpu no matter what
No more G skus for now
Of course they're equipped with the most basic version of the igpu as they're only there as a backup
Eh idrc tbh
780m wasn't an incredible increase
Suppose they had that under OC it probably would be a decent uplift tho
ye
And I mean
We don't even have 680M on desktop apus yet
So on desktop at least it will be a big uplift
680m is good enough imo
I'm ok with 680M being put onto the apus
@bleak coyote Someone in this channel can help you with your 7900xtx perf issues
Everything is installed correctly in pc gpu installed and wired correctly
But any game I play is so choppy and laggy and feels like I’m at 5 fps and under
It’s so delayed and slow
Drivers?
fresh windows with fresh install of latest drivers
Part List - AMD Ryzen 7 7800X3D, Radeon RX 7900 XTX, Phanteks Eclipse P400A Digital ATX Mid Tower
Thermals and everything good?
Bios updated?
yep
😭
yeah, I just don't know if there is some issues with 7900xtx that are unknown to me since I don't keep up with AMD
I have one and no issues
it's a fresh install though?
Lol he's not gonna like that
I mean, he put the PC together and then installed windows. You still think it's windows?
Hopefully there is less rare cases of 7900xtx perf issues.
I don't believe so
That could be the cause to the stuttering then
@bleak coyote
It's not called xmp for amd right?
Yep, expo for am5
Alright someone may have to help him do so. I've been up for way to long and need to go to bed
Cya
I thought I turned xmp on?
When I was setting up bios
That was the one thing they told me to do
Was to turn the xmp thing on
Then just save and start windows
Is GPU usage maxed?
@hasty sphinx I’m not sure if this has anything to do with the issue but I heard the monitor can be the problem
Maybe the monitor can’t keep up with the gpu
Or maybe the psu isn’t the right wattage
Idek
I’m pretty sure I bought all compatible parts
Literally home windows page is fast and every REGULAR app that isn’t a game runs smooth and fine
But when I load any game up, the menu and the game is soooooo slow and choppy
Like 5 fps
Where is that in settings
HIGHLY sure every driver is installed and updated
Pretty dang sure
Not sure
When I was on bios ppl told me all I had to do was do the xmp or expo thing
And save reset
That’s all I had to do is what they told me
Part List - AMD Ryzen 7 7800X3D, Radeon RX 7900 XTX, Phanteks Eclipse P400A Digital ATX Mid Tower
Asrock
B650M
Bruh now monitor won’t turn on
“No display port signal”
I can’t do anything
My monitor is locked on the “display no signal” each time I turn the monitor on
It is
Everything is plugged in where it’s supposed to be
Display port in gpu
Bro I don’t get it
Everything is plugged in correctly
Only thing in mb is perifs
There isn’t any other cable
That fits the shape of the display port
It only came with that one display cable
Everything else is hdmi and other shaped cables
There’s no other display
Ports
Literally there is only one display cable and one display port
Everything else is hdmi or something else
That’s differently shaped and meant for different cables
Like when I log inv
?
Monitor has to work for me to do anything lol
Nothing is turning on
Is it the one next to the first port?
Power?
Psu cable?
Oh that
Alr
So unplug the power cable and the display cable from the port and the monitor
Then plug everything back in
And retry
Is what ur saying
I thought it was f2 for ASRock
Ok
Ok
We here
Bios
Where
Where can I check anyways
Anything need to be changed here?
Ok
Boot page
Ah it’s enabled
Alr
Time to disable
That’s it?
All I needed to do was disable that?
So that alone fixes my 5 fps in every game issues?
Ok
Save and exit?
Alr
done
Ok somehow monitor working now
LMAO
All of a sudden it wants to work now
Maybe it was that wall cable
Ima login to the pc
Alr
So all I gotta do is drag that to performance?
Where do we find that specific balanced setting
I forgot
There
Should I turn in game mode
Heard that helps
So basically either option doesn’t matter
I’ll just turn it on
Cause I’ve seen ppl turn it on while gaming
?
Where
High performances
?
Mb lol I’m new to this I’m sorry bro
I see it
Alr
Yeah I got it now
Ok it’s on
High performance
Where
There’s no save
Button
Just x out?
Does it use stupid more amounts of energy?
alr
alr
Ok it’s open
Status says up to date
Yup
23.5.1
it’s the current version
So I’m assuming yes
Alr
Mess anything with this?
Alr
Ok so NOW I should be able to have discord open and run Val
Without scrolling through the MENU at 5 fps
Like
I’m game game?
In Val?
Alr
I’ll check
Lolol
Dude
I literally set every graphic in low as well
Idc abt looks that much
I’m all about the game ALLOWING me to play it lol
everything on the lowest quality and still so choppy
Like it’s so weird
Alr
I’ll check anyways
For good measures
Will do
Opening Val up rn
Bro I’ll be able to tell just by the menu
If it’s slow or not
Cause yesterday scrolling through the MENU was hell
Like it was so delayed
Bro
It’s still laggy
WTF
Vsync off
Omgggggg
it’s so choppy
Bro idek at this point
I might just be unlucky holy
I don’t get it
We did everything?
Do I have to reset pc to apply changes?
Broooo
Why
What is going on
Bro
Now my screen is frozen
BRO
I’m spamming windows to leave Val and it’s stuck
War thunder likes doing weird cursor stuff on my pc and nothing fixes it 💀💀
What the actual
Spaming does worse for your situation most of the time
Ok then what’s the solution
Lmao
Otherwise spamming is all I can do
Idek bro
This brand new pc I just built
And now I can’t even use it
Holy
What a waste of 2k
If something is frozen dont repeatedly spam close or next like my grandma does lmaoo
Ok then
What is the solution
Ik it’s just hella frustrating
I mean I know how but I'm not good at explaining things you know that lmao
RAHHH
I am
Just asking
But bro my monitor is frozen
Nah I’m good
My screen still stuck tho
Can’t do anything
Can’t exit out too
Oh well I can't walk you through if your screen is stuck😭
Ok well then we are done for
Lmao
By turning off monitor?
Or closing down pc
Oh
K
Goodness
Does this usually happen with most pcs?
I feel like I’m just an unlucky individual
Ok yeah
Then that makes sense
I just been chosen to endure this
Lmao
Weird
Pretty sure everything was updated before
So I turn it back on?
Right-click on the Desktop and select AMD Radeon Software. In Radeon™ Software, click on the Gear icon then select System from the sub-menu. Locate Factory Reset and click Perform Reset.
Try this first ig
Why doesn't he want to use ddu?
Wait so
What we are doing is uninstalling drivers and installing them again?
Interesting
So is the “drivers up to date” a bug or something I don’t get it
Pc restart usually easiest way to unfreeze ye
This resets everything
Well it's supposed to atleast
Wdym by “everything”
Your drivers
Not your whole pc
Alr
Ohhh
Ok ok
Alr I’m boot this thing back up
And open software
And do that
Sorry you've had such a bad experience so far man you just happened to be one of the few 😭
Bet
OKAY PATO
Ik bro
World just hates me
Luck just avoids me
It’s weird
Lol
Yea
Dawg
I just want this to work
Normally
Like any other pc
So I can run games normally bro
Literally was sure I had everything connected updated in tact
So weird
But ima trust the process
Brotha I got that fiber internet
I’m chillin
I have 800 download 700 upload
Even tho I got a gig router
Weird stuff
Ok I’m in the software now
Ok
Resting in
3
2
1
Uh
Nothing is showing
I just clicked and nothing happening, no black screen no shut down…
Oops wrong one
LOL
Check box?
Ok
Here we go…
How do I know it’s done
Well
I’m here chilling at the home page
Lmao
Nothing appeared
Software went away tho
But besides that
Nothing popped up
Alr
Done
Drivers installed onto pc
What now
Ok so the drivers instantly installed?
Alr
?
I just restart pc?
I click install windows10/11 drivers and it completed
It’s done installing
Like the file is here now
Adrenaline was never gone
I meant as
When I clicked reset the software went away
Like it exited out lol
I gotta set it up again
Yes
It says
Up to date
Alr
Wait
Actually
No
It says update available
Doing
23.5.2
.1 newer lmao
never know
Might just be the fix
Install?
Doing
Finish or restart
Ok
Done
Are we done…?
No like
It’s fine
Restarting
I logged in
So done done???
Bro
Don’t be another false alarm
BRO
I swear
Alr
Let’s see
Ima open up discord as wel
Always got it in the back
YOOOO
ITS NOT LAGGING
LETS GOOOOOOO
wait….
False alarm?
LET ME FR CHRCK
ima load into a match
NAH HOLD ON
CANT GET TOO EXCITED YET
Bro..
Why is my pc making weird noises
And now my pc is heating up so fast
I did
Everything at 60
Bro
Ima record it
It sounds weird
Alr
Phew
Ima just play….
With that noise running in the back..
Golly this is gonna be irritating
…I’ve never had coil whine ever wtf?
That’s supposed to happen?
It’s basically a 50/50 chance if you get it
How hot is it?
Pretty hot
Not like
You can’t Touch it hot
But it’s hot
If u lay ur finger on the gpu for long enough it could burn
The other parts of the pc are just very warm
Yeah pc parts get hot
But someone did tell me that because of this graphic card, heating up would be normal
Because it uses everything it can
To offer in performances
Yeah but this hot?
I see no reason why a brand new card should be overheating
It’s like pretty darn hot
Well
Nothing has shut down
It’s just rlly rlly rlly warm
Can feel it though the glass
Yeah like they're safe up to high 80s Celsius
All fans are running too
Good
Yeah check adrenaline
Yeah
They have a built in overlay u can turn on if u want
Ctrl+Shift+O turns it on
Go to settings
70 gpu 1732 vram 6.9 ram 28 cpu
Or that might work if it's alr enabled
It should be enabled by default
Yes
Okay try going to performance up top
On the right there should be tracking and overlay
Yea go to overlay
So basically when I’m don’t have Val open up it doesn’t gets like crazy
Even tho I still have it running
It’s only until I’m actually on the game
Cause it stops rendering
It starts heating up and that noise starts
It's completely normal
Ok
Ok if so ima just okay
As long as this doesn’t shut down in the middle of a match
I’ll try to ignore
But goodness it gets hot
Like an oven or something
Like dang
Your pc draws more power than most small space heaters lol all that energy has to go somewhere
8th grade science coming in clutch🗿
Ima have fun and enjoy this
Have fun
Why are you playing val without headphones 😭
I’m like 2 feet away and I can legit FEEL the heat radiating
It’s getting so hot
Wtf
goodness
YEAH THATS NORMAL LMAO
^^^
I do😭
😭😭😭
Yeah lol
My pc is a 5900x and soon 3080ti like I said high end pcs draw close to as much power if not more than some space heaters
It's alot of energy
Alr
Yeah bro
I’m just overthinking
ITS PCS
and these aren’t cheap low quality parts anyways
It’s expected for them to do this
That’s how they utilize All their energy
I’m just yapping for no reason
Just play the game goodness
💀
Ok I’m so sorry guys
I just want to be sure of everything
Yk the suspicions and anxiousness of a beginner of pcs like me bro
I don’t know anything
Lol
Thanks for all the help and patience tho
Ik I’m one annoying skid
Mk
Even if it feels as hot as the sun
It’s completely normal
Gotcha
Welp time to crazy
I can’t touch my 6950 after a gaming session
Alrighty
Loading into FIRST match of this pc
Pls survive lol
Ayo WTF
LMAOAO
Ik we not loaded yet but…
Golly
Bro I’m running 800 fps and 11 ping 😍😍😍
currently building a new pc and noticed that the gtx 1060 doesn't get enough power from my 600w PSU
wiiith a Ryzen 5 3600
I haven't checked much here
did work earlier and it's good
so epic
I doubt that the psu not having enough power is the issue
only when I move the PSU over to the new build it begins to not enjoy it
yeah I know
Unless you have like 4 1060 in there lol
It's a Ryzen 5 3600 with a GTX 1060 6GB
it powers a 1050 to just fine but once I get the six pin GPU it doesn't enjoy
So what's the psu doing that makes you think it's not able to supply enough power?
That sounds normal for initialization
it's three quick movements occasionally
what is the model of psu
it's one I bought ages ago on a budget
80 plus white smart 600e
it could be a bad quality model, and not the actual wattage that's the issue
tt
because if so that's the issue, that psu is known for catching fire
I wouldn't try to turn the pc on more
it worked in my other pc but the moment it went into this one it didn't work out with specifically that gpu
other two I have work fine
higher wattage gpu
might just put the PSU back in the old build and buy a new one for this one since I still do need the old one anyway
I don't think the PSU can be trusted in any scenario anymore lmao
I hear the damn thing clicking when it's simply plugged in
HAHAHAHA WELL WHAT DJ YOU KNOW
cable was smoking before I shut it off
the 12v connectors are the hot ones
Well at least the ground cables aren't the hot ones 😂
I want to say "called it"
But that sounds rude
you can say whatever because I am actually laughing at this
lmao
only what I think is the boot sector
so far it ran into a bsod for inaccessible boot device
idk if the actual drive storage is intact
the recovery local reset worked out so far though
it's installing
alright works fine
can you send me a link to one that's like 500 or 600w?
Pretty sure this is the one they meant, it's the hydro GE which is C tier but at least it's full modular, and C tier is enough for up to a 7 class GPU like a 6750 XT or 4070 ti. https://www.amazon.com/dp/B077V9SVSK
The A tier hydro g pro is $100
Personally I'd get this one, same C tier but cheaper and 200W more https://www.bhphotovideo.com/c/product/1387675-REG/cooler_master_mpx_7501_amaab_us_masterwatt_750_semi_fanless_80.html
Buy Cooler Master MasterWatt 750 750W 80 Plus Bronze Semi-Modular Power Supply featuring 750W Single +12V Rail, 120mm Cooling Fan, Intel ATX 12V Version 2.4, 4 x PCI-e Connectors, 9 x SATA Connectors, 3 x 4-Pin Peripheral Connectors, Durable LDB Bearing Fan, Semi-Fanless Operation, Dual Forward & DC-to-DC Circuit Design, More Conductive PCI-e Ca...
Hydro g pro is the good one but I can't find it cheap any more
Yeah it's $100 again sadly
The PSU market in general has gone crazy for some reason still
You used to be able to get an A tier 650W for $65
Question I'm helping my friend build his pc, for the gpu were trying to decide between 6900 xt vs 3080 ti
What country? New or used? Do they wanna do primarily ray tracing or just regular?
Usa preferably new but no issues with getting used, ray tracing isn't too big of a concern to him, but however he plans to stream and do gaming
At new prices get this, with used it'll depend
https://pcpartpicker.com/product/BM92FT/xfx-radeon-rx-6950-xt-16-gb-speedster-merc-319-video-card-rx-695xatbd9
607 on amazon hmmm
I have a Dell Optiplex 3050 and am getting a message when I try to use certan programs. "OPENGL version is too low upgrade graphics card driver" I have an Intel HD Graphics 530 and it has the most current driver. Any suggestions? Thanks
Any specific program? Hd 530 is a bit old and only supports up to opengl 4.6 afaik
A slicer program from Creality. It's for my 3d printer.
Is there another video card I can replace it with?
Is there any documentation for the program for the requirements?
Urgent help please
My 4090 is stuck, Can't be pushed in or put
It's flexing the board and if I let go the 6 pound GPU will break something
Clip is all the way back but is gripping the end of the slot
I got it, I had to lift up the card way more. Apparently removing the GPU brace made it sag enough that friction was catching the clip
Having a GPU heavier than my laptop is surely something
happened to me before, the clip isnt pushed down fully, youre gonna need to press that down again with a lot of force
I saw my life flags before my eyes
$1800 GPU getting ruined would be the death of me
Try openrgb or signal
use cura or prusia slicer and find profiles for ur printer
creality anything sucks
could probably get 6500xt/6400 LP or 1650 LP for cheap to run slicers and cad
would personally get 1650
I do use Prusa slicer for my Prusa printers but I bought an Ender and I don't think it will run on Prusa slicer. Thanks for the info on the video cards. Not sure it will fit in my Dell Optiplex 3050.
So I am not sure if anyone can help with this but I keep getting this crash error that occurs when I play some games for about thirty minutes to a hour. It gives me the error "Unhandled Exception: EXCEPTION_ACCESS_VIOLATION reading address 0xffffffffffffffff" I asked one of my tech savvy friends for help and he pointed me here.
What game is it and what hardware do you have?
That's often a memory issue but could be other things depending on circumstances
I am playing Sqaud and I have
Processor Intel(R) Core(TM) i9-10850K CPU @ 3.60GHz 3.60 GHz
Installed RAM 32.0 GB (31.9 GB usable)
System type 64-bit operating system, x64-based processor
With a 3070 Ti
What speed is the memory running at? You can see in task manager if you don't know
3200
Hmm. Ok so I'd start with a memory test.
Run this with the anta777extreme profile
https://www.overclock.net/threads/memory-testing-with-testmem5-tm5-with-custom-configs.1751608/
Hello everybody
I am just making a very light tutorial with a collection of custom config files and a DOWNLOAD LINK for TM5 v0.12
anta777 absolut config Official Intel DDR4 24/7 Memory Stability Thread
None of the work is mine but it seems like a pretty good and fast testing app
Update...
My friend's GPU (RTX 3070 TI from Zotac) according to him is crashing around 60c you guys think it's due to the GDDR6X memory over heating?
That's my assumption so far.
60C isn't a lot of context
What is 60c exactly
The temps that matter are hotspot and junction, if it's say a 60C readout on afterburner that's not useful at all
No water flow yet he just... keeps using it???
My cpu will throttle at idle if I turned my pump off
Tf 😭
Yes
So no water flow
WHY DOESNT HE FIX IT
Just get a cheapo air cooler at that point
Oh
I was gonna say literally holding a metal cup on the cpu would provide better cooling LMAO
That's wonderful
Smart
Quite the intelligent guy, we would get along
Fr like a 224xt goes for 20bucks now lmaoo
Dang
Mmm
Stonk cooler
Tell that to the gigacrap GPU I got. I'm pretty sure I damaged the memory, it reported 114C Junction when mining before it throttled hard, and after a short time was not stable at all beyond +400 mem.
I agree. And I'll never stop complaining about that 19.3k time spy score getting waste of silicon.
Freaking loses to a 3080 ti, badly.
iirc it's only rated to 105C, but I'll take experience over presumably over safe data sheets 9 times out of 10
my gigglebite 3070 ti was a monster. memory did +2200 stable during the winter without performance regression. hit a max of 86 ish C during the summer (albeit with a somewhat lower +2120 offset because when it got warmer it would scale negatively)
iirc it's only rated to 105C, but I'll take experience over presumably over safe data sheets 9 times out of 10
For which brand of gddr6?
I know Samsung at least doesn't give tj max limits but just gives an expected tj max
all GDDR6X is micron
Actually, looking at their datasheet makes me think maybe I can go over 1.4v on ram for overclocking
Oh, you meant gddr6x
well yes, that's what the message I replied to was referring to
Yea, it's rated for 105c max afaik
It has a max storage temp of 125c which might be what he is referring to though
You could probably run it over that but it won't last as long
I kinda don't get the point in giving such insane storage temp ratings to parts tbh lol
Like some customer is gonna buy a ton of gddr6 and be like "whoops, storage bins are full. Better store them in my running industrial oven I guess" lol
I also wish they gave more temp and voltages to life expectancy curves but I get why they don't
Eh, 3070 ti, 3060 8gb and 12gb, and 3050 were pretty meh
Now we get or 2 reasonable upgrades from last gen then a few GPUs worse than a basic oc levels of upgrades
Same with 6400 and 6500xt
I would love to see how I sane a 4030 would be
Like imagine a 1060 or 1070 tier xx30
Especially if they didn't fudge pricing
And it was priced like a 1030
3060ti g6x 
Just at $330 it's pretty meh
And I'd say 3050 ti 3060 8gb deserves a spot with those
Valid
The 1630 was just rubbing salt in an open wound
The worst offender so far - "4060 ti"
Thank god that 4080 12 turned into 4070ti
but tbh
If Nvidia was a bit less greedy
That 4070ti woulda been 4070
And $600 I suppose?
Apparently they where waiting and where happily gonna price at 700 depending on if the 7900xt was 800
:(
Yep
Nvidia doesn't drop price when it's set
Maybe if xt was 700 they might have done 650 4070ti
ye
Still kinds prefer 6700xt but I'm still a sucker for nvidia so 3060ti for that price ain't bad if I account in my own bias lmao
Hell 4060ti is even slower than the predecessor
Despite using dlss 3
Nah it's a tad better than 3060ti
Basically a 6700xt
In between 3060ti and 3070 so 6700xt
Yep
Even in nv lineup it sucks
Which is funny
if i go used $400 6800 is very much feasible
everywhere on ebay
in the us that is
I'm sure you could get a 6800xt now
tbh 6800 non XT was a really weird product, but I love mine
I forget it exists
Where did it stand compared to NV’s line?
Around 3080
I thought the 6800xt stood by the 3080?
xt leads it
Or was it another case of being like 5% worsish
Xnoo
$80 for somewhat >3070 perf (at launch) and double the vram wasn't a bad premium tho. just the fact that it's a 25% cut down N31 die is kind of odd
Amds drivers aged like fine wine
Basically the same as 3090
I still wouldn't pay the premium for a 6800 back then imo
Remember there was no 6750xt either
But now I lack any reasons to say no
if AMD's drivers hadn't matured so much, or without knowledge that they'd get to where they are now, both cards would be equally valid imo. as it currently stands with 6800 being only a little behind a 3080 and having double the memory of the 3070 I think it's a no brainer if looking a MSRP
When 6775xt? 
6995XT
I have mixed feelings about 1.3k for a 3080
But if it breaks I get 1.3k back for a new GPU
Nah, 7955XTX 
plus you can MPT those suckers to basically 6800 xt perf extremely consistently anyway, so that's an extra 10-20% raster on top of stock performance
paid $1100 for my 3070 ti, albeit bundled with a board
I essentially paid $1000 for my 3060 ti
I feel the pain.
Mine breaking lowkey a blessing cuz of that full refund 
$2300 for the most garbage 3090 to ever curse this mortal plane. I put it up for auction on ebay and the bidders chose to pay $2300 for it so I was only out the ebay fees.
Rxxx7999xtx3d
Highest they can go without hitting 8k
Recently?
No no this was in the worst of the shortage
Yeah back when you could barely find a 3090 for 3k even
If it was recently id be like "that's actually insane and that buyer needs money privileges taken away asap lol
I'd end the auction early before letting the bidding get that high today because it's either that (someone really irresponsible), or a scammer/troll.
My GPU was having some issue where it was force enabling power limit unless I went sub 1300mv
And it randomly fixed itself after a day of trying to find the issue
Not cause something I did
Just cause it decided so
But when it fixed itself I got another over 79k graphics score on firestrike lol
@oak rivet if i buy two of these for my laptop will i have enough vram https://www.ebay.com/itm/284668666769?
Need 48GB for 1080p med
Paid 900 for xfx 6800, sold my pulse 5700xt for $950 on ebay that same week.
oof
There was a time when the 5700 XT was one of the top mining cards for Hashes per Watt
Now no one cares what the top is

What country are you in?
USA
I wouldnt go for a 3060 unless you find a deal on one used, it's very overpriced
I can't send pics
3060 ti around $300 new, 6650xt around $230 and beats 3060
6700xt $310 and beats 3060 ti
Part List - GeForce RTX 3060 Ti LHR
Id probably do that
3060 ti is 30% better than the 3060
So should I get a TI or just a regular?
Ti
It's 30% better for $30-40 more
Otherwise get a 6650xt, 6700, or 6700xt
6750xt if it's cheap enough
What would be a good GPU for skyrim? (120+fps)
Are you running modded?
if not, then you could basically do anything.
Although increasing the FPS over like 90 does tend to cause physics issues with entities. specifically the opening scene.
For a friend lemme ask him rq
also ask budget and resolution.
ok i misunderstood him a fiorst
I thought he was tryuing to play one of the older ones
He said hes trying to play Skyrim V
Budget is between
600-1000
he said he'd like to stay on the lower end
and non modded
ARGB or nah?
6950xt, 4070 ti, 7900xt, 7900xtx
For $50 it's pretty meh
2tb solid gen 3 ssds are $65
Ah ok
I almost have a list ready.
6700xt, 6750xt, or 3060 ti then
what case you recommend?
I think there's some with a mesh front around $45-50 rn
Speedster 6700xt vs Zotac Gaming Twin Edge OC 3070 TI LHR which is better?
the latter is $20 cheaper.
@nocturne nest, does your friend have a PSU he can reuse?
Or anything he can reuse so I can optimize the pc's parts a bit better.
Hmmm it'd be cutting it tight but I think it should work.
Its quite old to
the build is currently $1051 for everything except psu.
13600KF, 6700XT, 32GB DDR5 guarenteed Hynix if I remember right, and the such.
could reduce it by another $20 if I downgrade the ssd.
Should be fine
Part List - Intel Core i5-13600KF, Radeon RX 6700 XT, Zalman S2 ATX Mid Tower
what I got so far.
tried to squeeze the perf to $ ratio a lot on this build.
Part List - Intel Core i5-13600KF, Radeon RX 6700 XT, Zalman S2 ATX Mid Tower
changed cooler to LT520 since it's better for LGA1700.
Costs $5 more though.
https://pcpartpicker.com/list/ymJXTn
If he wants to spend a lil more you can get a significantly better gpu and a longer lasting platform
Part List - AMD Ryzen 5 7600, Radeon RX 6800 XT, Fractal Design Pop Air ATX Mid Tower
If not I totally understand
Danny you approve of my budget build?
It feels weird for me to do make a budget part list.
Just throwing it out there
Is that ram hynix?
I would recommend something else
Whatcha got
Part List - AMD Ryzen 5 5600, Radeon RX 6700 XT, Montech X3 Mesh ATX Mid Tower
If they want to spend more, just change gpu and psu as wanted
6750xt fine on same psu
6800xt probably fine on same psu but id go for 750w fsp g hydro or 750w RME
If wanting a better cpu, 13400f+b760 ds3h ax+32gb silicon power 3200c16
Or 7600+ whatever that asrock a620m wifi is for $125 and an $82 5600c32 teamgroup kit
based

do ya’ll think an i9-9900k can handle a 4090. Im just trying to get 144fps at 2k on some games. Im buying a new pc but cant afford all the parts yet so thought i would just enjoy an upgrade while I finish saving up. My psu is 1000 watts so I think my current pc can handle it
anything sub-4k will bottleneck a 4090.
some perf will be on the table but depending on what gpu you have rn a gpu upgrade first usually makes most sense
i have a 2080ti rn but i have enough to get the 4090 and a new monitor or two
you will definetly feel the 4090 then
would a 4k 165hz monitor be a good pick
or like a 4k 240hz i dont really play a lot of shooters but i kind of like 240hz on my current monitor
Nope, even a 7800x3d can’t handle it
You’ll be bottlenecked until you go 4k iirc
240hz at 4k I don't think exists.
That would be much better if your pairing with a 4090.
Nevermind. 4k 240hz is a thing now it seems. Only problem is that they cost around $1200 from what I saw.
7900 XTX a good solution for Solidworks modeling and Keyshot 4K+ renderings?
It should be fine
Won’t be as good as a 4090 or 4080 but it’ll still work pretty damn well
144 fps at 1440p, id just go 7900xtx
Where is 7700 XT