#graphics-cards
1 messages · Page 40 of 1
Looks like it is 100% a 1080ti
Fan problem
yeah thats why i was figuring its a gpu issue, they said its been happening for a couple months and they have had the gpu for 2 years
Oh wait you weren't talking with me lol
Yeah, 12 bucks on AliExpress
But still "perfect condition"... Doesn't look like, I'd have said more like meh condition
Btw that fan that's making the noise probably never spun because it was jammed with one of the metal parts of the shroud
That's probably why it's making noise
Got squished badly
I would ask for a partial refund and profit with replaced fans
I was thinking about that too but where I bought it you can't really get partial refunds...maybe a wire transfer... Idk
I'd ask for at least 20€ off because of the big scratches on the backplate, the bent cooler fins (already repaired those) and the fan
ya
This is the noise the fan makes, and the fan is running at just at about 30%
It's louder than the one you hear ^
I think I need ddu, the drivers are probably having some problems because of the old 1080, doesn't look smooth and idle power consumption is high
Might try having them turn off Link State Power Management in their Power Management settings.
I didn't think of that
Yeah, I guess windows sometimes decides to turn that pcie slot off for god knows why
71c idle is hot as heck though. I wonder if it's overheating and needs to be repasted.

they werent idle they were on FFXIV
Ah, I just closed FFXIV for the night 😛
kek
15w idle for the 1080ti ok? They say it should be 10w and below
Idle wattage usually depends on how truly idle the card is, what resolution it's doing etc
15w is nothing to worry about
15w is arguably good lol
laughs in intel cpu idles
Bru u can't compare those, cpu's don't have ray tracing
||
||
Neither does a 1080 ti
1080ti can ray trace
It sucking at it but it will tracing the rays

RX480> 
Microsoft DXR Raytracing.
AMD 6000, GTX 10 and 16, and then the rtx cards can do it. It's a directX 12 thing.
Had to test DXR on MW2019. 😅 My work PC was a 1660 super at the time.
Doesn’t 6000 series have RT cores?
It does thats what i mean
Ahh ok
What's really cool is when not being used for rt they can actually do raster too instead of sitting their idle
Quick question. I installed a 6900xt in a system with a 700watt PSU and a ryzen 7 2700x, after I’ve been seeing games take much longer to load and frame rates worse or not much better. Could this be cpu bottleneck? Or cpu and PSU problems?
My cpu utilization is between 50-100 depending on the game
I also did do a clean install of the drivers
Did you ddu?
Oh I'm blind
Yes you did
For the 8 pin connectors, did you use multiple cables or did you daisy chain
I used multiple cables
What's the psu?
It’s a 700 watt bronze. Gigabyte B700H
That sounds like a PSU that'll need replacing
Also yes, 2700x would be holding back the 6900xt in a lot of games. Terribly so
How bad of a match do you think the PSU is? I only do gaming in 1080p so wouldn’t it draw less power?
1080p you'll also really be capping your card with the monitor
It's more of a 1440p card
Very
I'm not familiar with gigabyte B-H but I imagine it's either very new or very old
I'd go for something a bit higher tier for 6900XT
Like a Leadex III or RMe
What motherboard do you have?
Oh damn..
Yeah that's due for a change
You don't want to lose the card so soon
Ok awesome. A 5800x3d would drop right in
You can check make and model in systeminfo
Grab that and a thermalright phantom spirit 120 se
Odds are it'd be fine with a 5800x3d unless it's a very bottom of the barrel board
Yeah pretty much
One sec lemme see
@neat flint how much ram do you have too btw
And how much are you willing to spend for this card 💀
16gbs running at 3000mhz
I see
Oh um..I don’t know yet
It’s a prime x470 pro by asus
I believe that'll work fine yeah
Yay xD
That seems reasonable
Part List - AMD Ryzen 5 5600
Part List - AMD Ryzen 7 5800X3D
Second one might need a new cooler depending on what you have
What about a 7 5700x?
Yeah basically what You'r did
Depends on price, if it's still $160 it's good
If its not then nah, I'd go 5600 or 5800x3d
Then you grab the ram after cpu and psu
Then upgrade the monitor
I would go to 1440p 144hz+
Like gigabyte G27Q or HP X27Q or X32
Any of those 3 for like, <$220 usd
@neat flint do you have an ssd for your windows
My system is on an nvme while the games are on a 2tb hard drive
Sounds good! Thank you both for the insight!
Happy to :D
Quick little breakdown on what happens, the cpu essentially renders frames at the same time the gpu does
The cpu and gpu need to both be pumping out as fast as each other to render as much fps as possible
So if you upgrade the heck out of one? That gpu/cpu is capable of much faster now, but it's then being held back by the other
Different games yield different results but the 2700X working between 50-100% usage is it just working pretty dang hard rn 💀
This restriction also becomes much less of a problem the higher resolution you go, but games like shooters should still be (mostly) on the high side of fps still
I'm all ears (eyes)
I have a 7900 xtx in my personal system that needs 3 8-pin connections, problem is my PSU only came with 2 and I don’t know where to get more that work with my PSU
What psu is it
Asus rog strix 750w
And the cpu?
7 7700x
Ah ok
And are any of those 2 pcie connectors
Do they have an extra connector
Or is it just 2 straight connectors, single 8 pin
They both have the extra 6+2 pin connector piggy tail
Ok so pop that piggy tail onto the 8 pin to the farthest right
Tbh it should be fine with one being a pig tail
Only issue is when a two pin card is being daisy chained normally
Oh okay, well thank you again!
Np
Is the 4090 fe still in production or have they been discontinued?
yes it is still in production, it's the current gens flagship
Thank you! I was just making sure since i saw on Reddit fe models are limited edition and only made for a certain amount of time i was afraid I missed my chance to buy one
I know that but my question was if the fe model was still in production
It's still in production for the 40 series
^
anyone know if there any guides to dissasemble a 6650 XT XFX Qick 308?
Thank you
taking a gpu apart is fairly straightforward
remove all the screws out, check for any fan connectors and stuff
oh i thought there would be more since theres the heat sinc and pipes in there
^
I wonder if a better and bigger cooler matters way more if the ambient is at 40c
If the max temps are 66c at 25c they should go up linearly as the ambient increases
At that point cooler becomes very important and not really overkill
It scales mostly linear but not 1:1
At a higher temp it'll run at a lower clock speed and produce a little less heat
Going through this heat wave of highest recorded 41.2c glad I have ac ik peeps who can't afford it probably feeling real bad rn
My electricity goes up to $0.52 per kWh during peak times this summer, definitely can't afford that so I'll have to run my AC before peak when it's only $0.32
If the temp goes up during peak...
pretty normal to do here
God help 🙏
I'm expecting another 120F (49C) summer this year
We set a bunch of records last year, records that were set just a few years prior at that, so it's just getting hotter
3090ti owners in shambles rn 
Probably will be a while anything tops that thing in power consumption
4090 ti be like 👀
Was watching some benchmarks that thing is soo hilariously bad at fps per watt
Yeah how's that fall weather treating you right now
Go from anywhere to like, near or sub zero to 40C+ depending on the time of year lmao
It's unusually humid. like, temps are reasonable? 25-27C, but very humid so it just feels, yuck
And then at night it drops to like, 6C lmao
Summer it'll do this sorta routine but hotter and with storms and hail
Yeah sounds about like late October-November here to me
Sounds like my home town ShangHai.
Horrible weather.
Ya shanghai and Cali are probably very similar
Oh your in Cali?
I am
I'm not inland too much so I get sort of coastal-ish weather
I lived in Truckee for a while.
Cali weather is considered heaven compared to Shanghai lmao.
We got a new fear unlocked this year, first hurricane in the history of california. Now we have to worry about being blown off our feet into the earthquake chasms.
If I was in central Australia tho, like every day is 50C+ and you stay indoors always
The best word I can think of to describe ShangHai's weather is miserable.
Super dry and hot to the point it's legitimately dangerous out and around alice springs
There is no good time of year for weather unless you love icy humid weather with heavy rain during the winters like me.
You take a 4x4 with an extended tank and nothing else cos there's no way to get through the highways otherwise
They're too long for normal cars or ev's
The water tank is in direct sunlight outside and feels like boiling water during the day
Nothing is more concerning to me than breaking down somewhere near alice springs
People actually die from overheating out there
And there's no service for hours
Sounds like death valley national park to me
Death valley is 3.4 million acres
To the north west right?
It's northeast of Bakersfield and LA, near Vegas
Seems 4.6ghz is as good as I am gonna get stable with 1.35v.
Southern california near the border of Nevada yeah
Scored 15,209 in r23.
And when I say "near" I mean it's a 2 hour drive
A walk in the national park for an aussie I bet
It takes about 2 hours to cross where that highway is, which is the shortest point across there
About 3 1/2 hours to cross the long way
Ah that's pretty big
Which is longer than the average car can last yes
Yeh figured it was a walk in the park for you lol
Lol
The standard out there are extended tank 4x4's like land cruisers or patrols
120L+ of diesel
You make it to the next stop hours away then you fill up again lolol
50C+ ambient, they consider it life-threatening to be out too long
Nothing to do with me tho
I ain't about that life
💀
I'm picturing a Jeep with the rear seats removed and replaced by a giant gas tank, is that about right?
I doubt you use Jeeps there anyway, they're barely insulated
But at least the doors are removeable
Like this
Yeah you definitely want aircon lol
Yesh pretty much
They're very common here tho, go for like, up to 100k usd some of them
Especially if they're modded out the pants
I kinda want something like that with a snorkel, they're fun to drive through deep mud
Like up to the windows mud
Oh hell yeah
They're a do all kind of car
Car for life really
The newer ones are really watered down imo
Pretty standard treatment to raise the heck out of them, slap on wide offroads and yeah, snorkels, roo bars or bull bars and some spotlights for night driving
Big tank or racks for jerries
Always a spare
💀
The only time not to own a land cruiser in Aus is when you're a suit in an exec job
And even then some Land cruisers are nice and perfectly acceptable

PowerColor: https://www.powercolor.com/new?id=1679904586
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
Buy relevant products from Amazon, Newegg and others below:
Radeon RX 7900 XTX - https://geni.us/OKTo
Radeon RX 7900 XT - https://geni.us/iMi32
GeForce...
Went from competing with fsr to literally native

Based dlss
🍯
The trick with calling it better than native is it only needs to be better in one way for them to legally claim that
Yeah, marginally better at best not counting outliers is still legally speaking better
On that topic what's the reason AMD cards can't use DLSS? Are they missing something hardware wise or is it just NVIDIA gatekeeping
Since any card can use FSR
2 reasons, DLSS uses Nvidia Tensor cores (hardware) and DLSS is closed source.
Thanks for the info! Interesting
It's better ish with dlss because it's closed source and Nvidia is finicky about who can use it and they basically demand it to a standard whereas anyone can through fsr into their game
Yeah FSR is open source so anyone can implement it easily
DLSS requires certain things to work like image training, more work for game devs
That does mean that the quality of DLSS is better, since it's upscaling the image based on what it expects a 4k image should look like
Waiting for FSR 3 😴
What does this mean
Note: The video card PCIe 16-pin power connector adapter is being supplied by three 6+2-pin power connectors. Please ensure that the three 6+2-pin power connectors are not daisy-chained and do not share the same power cable.
A daisy chained connector looks like this
I'll draw a picture
Sorry my connection cut out
That is 1 connector but it has 2 that go to the graphics card
This is what you want
3 separate cables
This type of thing is what you don't want
Where you have 1 or 2 cables that have multiple outputs
The text thingy says I need three 6+2 pins but I’m pretty sure the gpu only needs two
Becuase the gpu comes with an adapter that spreads to two
Some psu's have 2 connectors at the end of one cable to supply a gpu, the warning is asking you to only use the 1st of the 2 connectors to plug in on each cable
It's probably something to do with the quality of the 2nd connector, like the cable quality isn't great
As an example
Like this
Wait RM850e should be fine. What gpu is this for
4070
You're totally fine whatever cable you use
Either the 12vhpwr or the single 8 pin pcie
Ok
These two will look the cleanest with it
It’s comes with only one 8 pin though
And that should be fine no?
Ight
All 4070's either have a 12vhpwr or 1x 8pin connector afaik?
They only use like 200W max
Ok
Ok so the black cable is the adapter the gpu comes with
And why is the bottom one bad
And the top one good
If you're using extensions they DON'T go into the psu so, pcie cable from pcie into strimmer into adaptors
Ik
I don’t even they they are long enough if I tried
Im trying to DDU but this pops up. Anyone know a fix?
Store it locally maybe? Also did you unzip the folder
If you're in safe mode it can't access onedrive
As you won't have internet access
Ddu specifically says it won't work on cloud storage
The file path is OneDrive...
alright it works now thanks
With a current 3070 would you say the 4070 Ti is still the only worthy upgrade on the NVIDIA side? 4070 probably not worth it?
4070 def not worth it
Is it safe to run a GPU at like 70-80C main 80-90C junction? I can run it at like 60 if I have fans on but I like it being nice and quiet.
From what I've remembered it's fine but just making sure
Card is 7900 XTX red devil :)
If it's over 100~ thats when I should worry right?
For some reason my 3070 (EVGA XC3 ULTRA) doesn't turn on the fans unless I turn it on
Very weird behavior coming from the software, and it's especially annoying when I'm in a game and it starts slowing down due to overheating
Nah, it just seems like an issue with the software as a whole, as I've seen some posts of other people having the same problem
?ddu
DDU (Display Driver Uninstaller) Guide by Pato
https://github.com/NeweggTechie/Graphics-cards/wiki/How-to-use-DDU
Always worth a try :)
Not sure why that would fix the problem, as it happened after I installed the software
Evga precision x1 iirc
only way for me to get the fans on auto mode spinning is by turning them on manually and back to auto
Firmware on evga cards can be quirky by itself. I outright prefer AB & so have my fan at either 0% or 50+ like so. If I knew, would've definitely gotten another brand.
Is a 3090 used for 740 a good price or its too good to be true n sumthin is definitely wrong with
thats very close to new 4070ti prices
atleast in the US
you can get a 6950xt for $600 at the moment. Not as good at Ray tracing but has faster rasterization. Not recommended if it's being used for productivity applications though.
Would that 6950xt be n ok combo with a intel i5 8400
Not to game but to edit
@hot bough
What type of editting?
Overall if your going to be using the gpu for productivity apps I'd recommend grabbing a Nvidia card. If my memory does not serve me wrong the RTX 4070 is a bit faster then the 3090 while also being faster in ray tracing.
for editing i think 4070 would fare better
nah, the 4070 actually performs like 3080
not 3090
that's the 4070ti you're thinking about, but that's 3090/3090ti perf card
ahh gotcha, thanks for correcting me.
But my motherboard is only a 3.0 slot its not a 4.0 doesn't the 30 n 40 series 4.0 slots
@oak rivet @hot bough
It's fine
It runs with 1% of itself of pcie 3.0
So if it's a vertical gpu mount 4.0 going into a 3.0 motherboard board it doesn't matter @odd siren
Uh, manually set the slot to 3.0 in bios and it'll be ok, if you're using a riser
8400 is pretty old tho, you'd see some good gains upgrading the mobo and cpu for editing as well
(why vertical mount...?)
I know im. Thinking of upgrading to a 9900k
It's always been my streaming pc only but I've been getting into editing n my 1060 6GB be ramping up like crazy lol so i. Know I jus have low teir components
Uh rog strix code x
Normally I'd say "heck yeah, go for it!" But specifically the 9900k sells for absurdly high prices online even if it's as old as it is
You can buy 12900K's for 9900K prices and 12th gen beats the snot out of 9th gen
What's your total budget?
And what ram & psu have you got
Well I don't want to totally let my 1st pc go to waste but I have 32GB of ram 3600 n 660W psu
Ok the ram can stay
660w psu will not handle a 6900xt
What's your total budget, we can work something out
I've seen on ebay 250 9900k selling for but yes I could build a new pc jus don't want my old pc to go to the un used lane lol
Jus ton of compatibility to upgrade I guess bells n whistles
It's more like, I'd rather maximise the investment
Cos 250 for 9900K is gross
You can get equivalent power on a next gen mobo and cpu for the same price
I know it's old
It's not that it's more like, you can have more in your hands for the same money 
I know
True
But 9900K comes with 2 caveats
#1 lower single and multi thread performance
#2 really high power draw
I mean I know if I were to build a 2nd pc my streaming pc would jus go in a closet
So it's got no positives 🗿
You could sell the old PC and make a return on investment 
That's still good
Good enough for a lot of things
People still sell and trade ddr3 pc's man
Much much older
I gotcha
Whatever fits the budget for the buyer tbh
We're in the ddr5 era now 
Let us know your budget man I'll see what the best case scenario is for your system
Well my 2nd build budget is 1500-2k but my 1st build im trying to put as much lights as possible n make it a capable pc for editing n streaming
@odd siren
But slowly but surely I've been trying to chase that 2080ti with the led light fans from aorus gigabyte 1
But there already at the 40 series 🤣🤣
I wouldnt pay more than $350 for a 2080 ti, even that's pushing it
It's 600 on Newegg refurbished
That's absolutely awful
5 sumthin
You can get a 6950xt for that, a 6800xt for less, a used 3080 for less, and a 4070 for that
Gpus that are no longer in production are awfully priced directly from retailers most often
I would only buy a 20 series gpu used
Yea used on Newegg is high as well
You can replace fans on a gpu, im sure you could find rgb ones
you're doing 2 pc's?
what's your total budget
No jus building a 2nd 1 but upgrading my 1st with lights as much as possible
so just sticking a bunch of lights in the 8400 1060 build?
Tryna make it look like Vegas
Part List - Intel Core i5-13600KF, Radeon RX 7900 XTX, Phanteks Eclipse G360A ATX Mid Tower
Have budget to go for ddr5 too
If you want to spend more
Kinda but wen I run small after effects stuff my gpu ramps up crazy n it take awhile to load or render so I know my components are not up to standard or jus below performance
Could just buy rgb strips and stick them in
yeah you could give it the vegas treatment with some cheap rgb like ez-diy FAB strips
This is wat I have so far
I jus switched to a all thermaltake theme
But my gpu ramps up like crazy doing small edits so idk if my gpu needs to upgrade or my cpu needs n upgrade or both
I can't really do much better than Bacca here, we have basically the same list
@barren trout do something like the reply linked or this https://pcpartpicker.com/list/8mvwLs
Part List - Intel Core i5-13600KF, Radeon RX 7900 XTX, Fractal Design Focus 2 RGB ATX Mid Tower
I'd personally opt for 64GB and call it a day, you wouldn't even need the old pc tbh
flip it for 300 or so
Well b4 I had no idea bout the pc space world
So b4 I wasn't into all the lights I was n still am a console person
So spending a thousand was crazy to me
But now I'm getting into enthusiast builds while upgrading my 1st to max b4 I pull the trigger on the 2nd
You would think a pc with a strix board would be fast right 🤷♂️
Well i didn't know any better
they don't write a book on these things so I don't blame you
I would strongly consider going with one of our lists tho, enough power to just rock a single system instead of two for streaming and editing
I studied for like a year n come to find out I still was lost
My budget was 1k but I spent like 1300 on my 1st build but 5 years later I'm jus trying to max my 1st build b4 I move on
Bcuz pcpartpicker told me everything was compatible but my mother board wasn't
Yea im 5 years in still learning but I don't feel accomplished maxing out my old I know I wasting hard earned cash but let me be me lol 😆😆🤣🤣
Until I max out my old pc
Hi
May I have problem if I install my four years old GPU (ZOTAC RTX 1660 ti oc) in my new build until I got money for a newer GPU?
hey for my fps limit thing should i have this application detection level on low or high
Should be fine
any one
Just do high
Thermal Grizzly: https://www.thermal-grizzly.com/produkte/522-cpu-contact-frame-for-12th-gen-intel-by-der8auer
Support us on Patreon: https://www.patreon.com/hardwareunboxed
Join us on Floatplane: https://www.floatplane.com/channel/HardwareUnboxed
Buy relevant products from Amazon, Newegg and others below:
Radeon RX 7900 XTX - https://geni.us/...
i’ve just switched from a 1650 to a rx 6700 but when i power on with the new gpu it only comes up with a black screen can someone help me with this
i’ve done my ddu and everything
PCie cables plugged in all the way?
anyone know if there is a way to take the radiator off the bottom shroud for the fans on a 6650xt XFX?
I was able to Get the top part off and paint it but the bottom part has a radiator thats mounted to the fans, But i can unscrew them as the radiator is blocking them
QICK or SWFT model?
I can't tell if it has 2 or 3 fans
You have to take the heatsink off the GPU to be able to access the screws usually but yes the shroud is removeable
I did that
But the heat sync is screwd to the bottom shroud
Is the problem that your screwdriver doesn't fit?
The heat sync is in the way of the screws
and i cant take the heat sync out because its tied to the fans
idk its hard to explain without you being able to see what it looks like
It's just sounding like you need a slimmer long bit screwdriver to me
dosent fit between the rad
Right which is why you need a slim one
Then its too small for the screw
do they even make screw drivers that small
to fit through that
You said you took the heatsink off the GPU
That doesn't look very off
There's screws under the backplate that are holding the heatsink to the GPU
Warning: You will need to repaste the GPU if you take that off, and be careful not to rip the thermal pads
https://bit.ly/JawaGPUOwenApril23
With GPU prices coming down for some GPUs, going up for others, and the recent launch of the RTX 4070, it can be a confusing market. You should not look based on MSRP, but instead look at which GPU offers the best performance at the actual price it sits at in the current market.
Best $200 GPU: (Good 1080p)
htt...
Very helpful and goes over all price class of gpus
I put it back togeather
in that pic i was showing how small the gaps are between the rad
Looking at that graph, the 3060 12gb might match it in performance though...
at least in some games
my $400 3060ti is gonna beat it lmao
that looks very fake ngl
i would be mad if 4060 is only a little bit faster than 3060 8gb
the slower 3060
it better be better than 3060, but i won't expect 3060ti perf
that's where the 4060ti fills the gap
3070 perf
Even fake, I look forward to the entertainment as how accurate that turns out to be
i'd be both sad, angry and entertained if it turns out true somehow
that's some perf regression if there's one
400 imo would be accurate
i doubt it will happen, if cuda count matches 3060
cuz 4070 has matching cuda count against 3070
That would line up perfectly with market stagnation
but the increased efficiency of the cudas gave it perf uplift
along with addition of g6x
im talking outside of price/perf
but yeah
once we see 600
the whole deal falls apart
It's hard for me not to look at price with Ada
Cos it's focus is literally price this gen
fair nuff
4080 1.2k
ouch price indeed
at launch it was pretty terrible, inflated to 4090 price
or near
Supposedly computex (computech?) is the drop time for new rdna 3
Ya 7800XT and 7700XT
Wonder how much better it's rt cores will be
Ai acceleration when
Mine
Frfr
🤯

ROG Ally be like, Z1 CP2077 5fps RT
Brrrrr
You know you want it
$649
The most experience of all time
Wait how 😭
I need
@grizzled nimbus remembers it better than me but it's supposedly software-based.
Oh? Huh
at what point did we come to where 5ghz is possible on a handheld
Heyyyy don't say that lmao
What de hecc
ye
I am
it's called Z1
I am open about it 💀
Felix I'll have real rt next month
But how will I do the 3080 gaming
I'll RT u in a minute
DO THE AMD GAMING
THAT CUTIES UP FOR SALE ON OFFERUP BRUH
YOU KNOW WHAT ELSE IS A CUTIE ON OFFERUP
THE PUPPY UP THE STREET WITHOUT A FATHER FIGURE

Used (normal wear), Msi Gaming X Rx 6700xt I've been using this card for a little over 4 months and it has performed great at 1440p. Just looking to upgrade as I will be focusing more on 3d design and rendering rather than gaming...
Comes with everything that it would from the factory (box, startup guide, etc). Make an offer!;
YOU KNOW WHAT YOU SHOULD DO
RAHHH
SSSS-SIR
Me when I lie in description
But I do wanna use blender
Jelly was supposed to teach me 🗿
Dude it thinks I'm a terrorist
LMFAO
Fair enough
Not why I'm buying one
But don't come crawling bacc when you remember ur first wife (AMD)
These are the pics I posted
MY FIRST WIFE WAS A 1080TI
I clean my pc every other month or so
And before the pics lol
No its 1pm silly
fsr 3 when 😢
Soon™️
before 2024 is all i want 🙏
1070ti moment
Should have posted this pic @odd siren that cat would have made it sell frfr

…I thought that said ass
LMAO
ass so thick they keep alerting the neighbors

how much.
halfway
with RX6k, and maybe 7k, haven’t looked into it, each stream processor has part(?) of an RT core
i believe 7K has dedicated ones
it’s hardware, just not the best implementation by any mean
Figure this would be the best place to ask. I'm old School, so maybe Im worrying for nothing. Last year, built my son an Aorus Master Z690 I7, DDR 5 64gb ram, and several SK Hynix P41 NVME 2tb, with 12gb RTX. Only just found out he's using his RTX to run servers, instead of the MB. I'm worried he'll kill his RTX unnecessarily, when he could be using the PC components instead, like when your running a Minecraft servers or Terraria server, or am I wrong?
... what?
By RTX do you mean the GPU?
HUH
Yes
also, you can run a GPU 24x7 for years on end without any problems
this isn't even a problem
Now just to double check, do you mean he's running the server off his GPU or do you mean he's running a server that also has a gpu installed.
He's running off the GPU. I'm used to having a GPU to take the load off the motherboard, but when he told me he's running servers off his RTX card, it just didn't sit right with me. Happens when your old and do things a certain way for years, that when something that just doesn't sound possible is possible, has me a bit worried that while he may be running a server off his RTX card, that it's at least safe. First time I heard of this. Back in the days when overclocking required pins being cut, I just wanted to make sure it's something safe
overclocking does not require hardware modification these days, and servers don't need a GPU
Was just using it as an example. I rather replace an I7 should it fry, then an RTX
neither of them will fry
Thanks.
So long as the card receives sufficient cooling and he doesn't physically modify the card it'll be fine.
no he's a pro XOCer
vince and miller taught him everything they know
Coolings fine. Not like me who used a horrible psu on a new I9, oh yeah, Gamax 😂
I would of at his age
Yeah your son's pc is just fine then. I am surprising he's using a GPU for a server though, very rare to see that.
he's not
Usually CPU is better for servers.
Download the free generative AI ebook: https://clickhubspot.com/zgf
The RX 6800 XT has been one of the best value GPUs in its price class for a long time now. Now that the RTX 4070 is available, has it dethroned the 6800 XT as the best value GPU in the price class? Well unfortunately, the 4070 launched at a high enough price that they are not e...
Strange how they fail to mention the 6950xt 
what's the price discrepancy?
6800xt 520
4070 600
6950xt 600
i bought a Nvidia geforce 1660 super and a ryzen 5 4500, was it good or stupid. Just a curiosity if i did bad or not, i found this server only now
Depends how much did you spend on it?
Ehhhh, very so so.
Especially considering for just a bit extra you could've gotten a much more modern GPU.
Like 300 hundred?
Btw I just wanted to be able to play games like the Witcher 3 o CoD
Which I couldn't with my 10 years old pc
now i can play them on ultra setting
I am quite happy
You can find a RTX 3060 used for about $300 or a 3070 for about $350.
And used is it okay?
Yes.
They told me that taking it from eBay is risky
Used is just fine.
They could overclocked it
Just make sure the seller has a good reputable then Ebay is find.
Overclocking does no harm to the GPU unless someone used a custom bios on it which is extremely rare.
I don't think I'll buy a new pc for a long time, 600 hundred euros was a long time investment for me 😅
i hope I'll be able to play the latest games at least for 4/5 years more
Oh well, just be sure to check in with the geeks next time your in the market.
Even at Low setting
...... Just a fair warning its most likely 2-3 years given the tech.
Given that 60fps is the target.
Even 30 is okay
Then yeah probably.
I played the entire game: Batman Arkham lagging
and i was happy with it
(not with this game, the previous one)
Btw thanks a lot
good luck with everything
You too. Have a good day.

👍
I want boinging cat
20 giggle farts
Not enough
For those prices yeah not very good assuming you're in the US
It'll depend on what country but 260 sounds steep at least the cpu might be okay
Said euros so probably not US
Yeah noticed that after
Also depends if it was new or used but either way 260 sounds steep at least for western Europe anyway ik eastern tends to be more expensive
out of curiosity would replacing the fans on my EVGA RTX 3070 XC3 with another one make it more quiet?
Deshrouding or just getting replacement EVGA fans for the shroud?
You could ziptie 2 p12's to it or something and yeah it probably would be quieter
Yes thats the method
I thought that maybe I could replace it with some like P12s or noctuas.
Something good and quiet.
Right now my GPU is the loudest component in my system by a large margin.
If you do it right a deshroud will be quieter
You could also try an undervolt first
Can also make a less aggressive fan curve
Did that but still a big loud.
Might try adjusting it a bit more so it doesn't turn on unless it exceeds 50c.
Make it like 60 or so lol 50c is nothing
Yea I noticed on my card max fan speed isn't much better than just leaving it at a stagnet 35%
?
Why you cranking the fan at the end 😭
that's set to go to 100% if it hits 80c.
I personally wouldn't go to 100% till you hit 90-95C
gotcha.
Like I said tho 60c is nothing
Set a stagnet 45% fan and see how warm it gets
anyway to make fan curve presets?
Just to get a base line of when to start pushing the fans.
Better but 70% is prob still loud
Test it and see lol
Aight, also what should I use to monitor temps while in a game?
Afterburner overlay works
how to enable that?
Go to settings in afterburner
Here I'm in class rn lol https://youtu.be/sbh5O4abiwY
For more information, follow this guide:
https://www.techy.how/tutorials/msi-afterburner-setup-on-screen-display
A short tutorial on how to set up the MSI Afterburner on screen display on your Windows PC.
🛠️ Equipment I use: (Mic, PC Components, etc.)
https://www.techy.how/equipment
Leave a comment if you have any questions.
Timestamps:
0:00...
Good, how's it sound?
If I were to try this, would the Deep cool FK120 fans work well? Those are the only 120mm fans I have on hand.
Yeah it'd work idk how quiet they are tho
You should be taking off the shroud if you want to lower noise
I think you'd be ziptieing to the heatsink, probably not the pcb
Mhmm, will I need to repaste if ai remove the shroud?
Also, it's been about two years since I got the GPU is it time to repaste?
Anything I need to be cautious of or know before I attempt a repaste.
When you take the cooler off the card
Pry it off very slowly and very carefully
The thermal pads will still stick like glue
Taking it slowly you'll keep the pads more (or fully) intact and also you shouldn't tear anything off the PCB
Order more first then
Gtg
K
Speaking of repasting lol, would it be a waste of time to repaste and add new thermal pads to my card? Only had it for a month but I really love to just tinker with stuff lmao even if theres little performance uplift
7900 XTX red devil thats like a monthish old, delta between hotspot and edge is around 15-25ish
Whenever temps start running away on it
Perfectly normal
Yeah I've seen people with like, 100 on hotspot
It idles at pretty high temps but I think that's from the VRAM thingy where it always runs max
Depends if it's actually idling
Like
It will pull out of idle pretty easily at high hz 4k
Idle clock on xtx is pretty lightweight
Yeah, just like on discord with hardware acceleration off and steam open it sits around 45 so it's not like horrible just higher than I'd expect
45 is fine
With a very mild fan curve so it's not like the fans are super high, just like 1K RPM
You also have the gcd playing a factor
Gcd itself gets hot on rdna 3 and it's usually the highest reported chiplet
Whats that? Never heard of that before
So rdna3 uses a chiplet design right?
Yep
There are 7 chiplets on the xtx
6 MCD's for cache
And 1 gcd for graphics
The big one in the middle is gcd
It runs the hottest
I assume the G stands for graphics and the M for memory?
Ye
What does the CD stand for, something die?
ahhh ok that makes sense yeah
Probs not this but it's simple enough acronyms
But ye the gcd can get fairly warm
It's load temp is also not too high tho
GCD I've only ever seen get up to like, 80C?
All the MCDs are within a degree of another, besides one which is like 4 above but its nothing insane
Lemme hit it with a load and see
That's pretty normal yeah
Much like cpu cores you get deltas just from yields
Nature of the beast
Memory junction shoots right up lmao
It's odd how the radeon software only allows fan control based off of the GPU temp and not memory or anythin else
How hot is your g6
MCD6 or GCD?
Sorry memory junction
I saw some reviews on micro center and someone had 60 on edge 119 on junction
This is under furmark full load at like 2K RPM though so it's not that bad
Nvm it doesn't use a plate I'm misremembering
That's definitely a bad factory paste job
60 delta is way too high
You can run like 700W through these things on good paste and still have hotspot deltas under 40C
Yeah they gave it 1 star and wrote an essay on how bad it was. What was weird though was the fact that they emailed powercolor and they said it was within spec with no problems
Lol
Yes some companies can be dodgy about it
Cos if it still runs games above spec, well

I think MBA, Merc and Nitro are the vapour chamber models
I don't think RD has one no, it's really thick instead
It's a good cooler anyway, a simple repaste would fix 60-119 temps
Micro center reviews are funny like that
Curious about this though; how well does it perform at 700W?
Like, compared to idk the 4090
I've heard of modding it to draw more but never seen actual numbers
Near 4090 perf
Once you pass 600W, you're basically there
Save RT and AI, etc etc
It runs well though
Evc mod
shunt mod no workie on AMD because they don't really do shunts for current monitoring
not in the same way as Nvidia I should say
They locked down the pcb and sppt code down pretty hard on rdna 3 so more conventional methods are thrown out
That said, evc isn't the hardest to do. Not easy either for the inexperienced
Probably not the best place to start with GPU modding 😅
Indeed lol
Maybe in a few years or if I upgrade
But dang the XTX is just amazing in every way tbh
Unlike rdna 2 I've met so many RDNA 3 owners now and none of them seem to be unsatisfied at all
XT and XTX are both just really nice experiences
Only ones I've seen upset are over idle draw and that's proving more rare lately
It's understandable, there isn't really much to hate at this point. At launch the XT being $900 was meh but it's mostly good now
Yeah the XT is a good price rn
Very good price! I've seen some open box for like 725 if you're lucky enough to be close to micro center
Wow I'd take one for 725 any day
There was a 4080 TUF for 1,055. Kinda regret not going for it but it is what it is and the XTX is still amazing
rdna 2 owners were unsatisfied? may I ask why that is in your experience? I've been exclusively a Nvidia owner up until my 6800 and personally I'm thoroughly impressed
Speaking as one of the owners that was unsatisfied that he knows.. I had 2 different 6950xt that absolutely refused to work properly with my system. Spent several days with very little sleep trying to figure out what the cause was with no good outcome. Swapped to Nvidia 30 series and had no issues whatsoever in the same system. Been that way for the last 8 months.
I'm an rdna and rdna 2 owner and I've honestly never really had issues with anything that was the fault of the card
Almost like sample size and unit variation is a thing?
Talk about blowing that comment way out of context. My personal experience with rdna 2 was fantastic, but I've met a number of people who did not like RDNA 2 at all and crossed the floor to nvidia. Similarly? I've met a number of people who did the opposite and crossed the floor to AMD. These people exist in every crowd and every hobby. It was never a comment on the total population of RDNA 2 users I know
However, of all RDNA 3 users I know
I've only met a couple that have had any significant complaints, if at all
And that was a long time ago
Now? No one that I know is complaining about any of the older launch issues or daily stability or whatever
I could introduce you to a hub of RDNA 3 owner's if you like and you could go ham all day about it
Yeah, but it's a pretty high likelihood I would've gotten screwed somewhere
5700xt which is notoriously crap with drivers for 3 years and a 6700xt at launch where amd usually makes a few oopsies on drivers
Yeah, we could talk about the sheer amount of people that feel burned by RDNA 1 forever and will always curse AMD for "bad drivers" lolol
Yeah
I find it funny the swath of Nvidia people who have never used rdna1 who crap on rdna1 (specifically 5700xt)
Can't knock it until you try it





