I dont use the bypasser for quest, but im pretty sure you just upload it like normal.
#Quest Bypass Help
rain cradle
sand coral
I dont use the bypasser for quest, but im pretty sure you just upload it like no...
well after in authorize it still says the limiter is on
opal escarp
u uncheck it
main knot
well after in authorize it still says the limiter is on
It’s a bug due to the new builder. The upload size limit can’t be properly set on new instances. I’ll fix it on a later release, but for now simply enable and disable the toggle before every upload that fails due to size being too large.
Doing that will set the upload size limit to unlimited on the current instance.
sand coral
u uncheck it
Wait there was a check mark for it
opal escarp
Wait there was a check mark for it
ya
unclick it n upload normally
at least that what i did n it worked
sand coral
oh hell
sand coral
ya
Real quick for the question side to work I have to upload windows side first then right after do quest side or is there more steps for the quest side
opal escarp
ya once u do the pc then make a new project for the quest thats if the pc n quest arent in one unity n then import ur quest n stuff comes with it once u import get the id the pc verion from ur avis and attached to the quest n then switch it to android n upload but make sure to uncheck the mark i show u if its over quest limit
thats bout it
sand coral
Well OK bad new I don't a quest side I'm trying to make a pc avatar turn in to a pc and quest avatar so I can wear them because I'm quest right now for vrchat
I should of been more precise
sand coral
ya once u do the pc then make a new project for the quest thats if the pc n ques...
I would like help after I get home from work pls
opal escarp
I would like help after I get home from work pls
sure just hit me up
sand coral
OK then thank you
opal escarp
mhm
sand coral
Plus funny enough my own son won't even help me so I Appreciate the help.
opal escarp
lol is all good happy to help
nimble tundra
My token is not working?
sand coral
My token is not working?
make new on in bot section
feral valley
how can i get the token for bloodborne?
main knot
how can i get the token for bloodborne?
Go to #bot🤖 and type -token.
feral valley
thank you
indigo ether
how do i go about linking my patreon and discord?
sand coral
how do i go about linking my patreon and discord?
Last time I did it it was easy you just have to login from patreon and sould be good from there
tropic marsh
sorry to complain, but I need help with bloodborne, im not sure why but I just started paying for the patreon and everything was okay. But for ethe fact that for some reason it is telling me there is some problems with the "humanoid." congiration? or that it isnt and the quest bypass doesnt seem to really work?
unless im doing something wrong then im not too sure but yeah
main knot
sorry to complain, but I need help with bloodborne, im not sure why but I just s...
The humanoid issue is unrelated to this post. What about the bypass isn't working for you?
main knot
It’s a bug due to the new builder. The upload size limit can’t be properly set o...
I went over it here.
tropic marsh
The humanoid issue is unrelated to this post. What about the bypass isn't workin...
ah okay, because when I was converting it without bloodborne the avi was fine so yeah
and im not sure? all I know is that the avi should be able to be over ten mb with bloodborne if I remember correctly
but I think I just might be doing something wrong
main knot
and im not sure? all I know is that the avi should be able to be over ten mb wit...
Are you authroized and disabling the toggle on the quest section?
tropic marsh
Are you authroized and disabling the toggle on the quest section?
yes!!
so sorry for the late response, I just got done with some stuff
with college
but I did all of those, and still, it would state that the humanoid thingy would go, and the Physbone mark would come up, not letting me go more above in physbones
imma redo it
okay I redid it
put the authy in
main knot
The Phys Bones are preventing you from uploading. They’re checked server-side, so they’ll all be disabled if you go over them, that’s why I didn’t allow users to go past them.
tropic marsh
yeye, I do know about the physbone count, im going to most of them, but does the bypass work for the physbones? but im guessing it doesnt by your response
sorry
thanks !
main knot
Quest Bypass Help
little maple
umm
now it said this
to large
i dont know if its supposed to have a limit to it or not... but how do i get through that
figured it out
opal escarp
its greyed out, how do i unclick it?
if you have the paid versionwhere u can btpass the limited you have togo to settings and finf where it says quest and where is says mb and to the right it has checking mark you unclickt that and click it againand unclick it thenits able to upload you have to do that if it says the mb its more then 10 but you always have to leave it unclick before youdo any project
if it doesnt work ill makea video n sent it
limber helm
ive subbed on patreon but dont know how to download the paid version (im stupid)
limber helm
does this SDK also bypass the parent constraints block on quest?
little maple
ive subbed on patreon but dont know how to download the paid version (im stupid)
There is no download for paid…
Go to patreon settings
And link discord
After that
Go to bot Channel and use /token
That’s the token you put in the blood borne settings, authorize it and then for the limiter uncheck the box
little maple
does this SDK also bypass the parent constraints block on quest?
No just remove all the bones and add new ones make sure you dont exceed 14
If u need more detailed help just dm me
I figured it all out
lime brook
ya once u do the pc then make a new project for the quest thats if the pc n ques...
Can we just put any number for the quest limit like for example can I put like 100 or 300
What can I put?
opal escarp
idk i usually just unchek it and it lets me bypass any thats if u have the paid bloodborn
main knot
There are 2 ways. Enabling the toggle will enable the limiter and you can change the default limiter value to something higher. Disabling the toggle will disable the limiter and make the uploads unlimited.
main knot
for me it's greyed out
You need to have patron roles.
strange gate
so quick question, we can't bypass the limit of quest (10mb) with only the free version right ?
main knot
so quick question, we can't bypass the limit of quest (10mb) with only the free ...
That's correct.
strange gate
got it, thx !
lime brook
Hello
I requested a token
For my bloodborne earlier but I needed too redo the whole entire project
I requested for the token again and now it is saying no data found
Pleas help with this bc I don’t wanna wait 18hrs for another token would appreciate the help with this.
lime brook
Please bro 😭
main knot
I requested for the token again and now it is saying no data found
Why did you request for another token when you already had one?
Once you enter it once, then it’s saved and will authorize you automatically.
But even then, changing tokens shouldn’t matter. It’s the unique identifier which seems to have changed.
Do you remember where you created the new project?
lime brook
Yea but I had too redo the whole project and when I pressed authorized it didn’t let me
Kept saying token not found at all
main knot
I see that you managed to authorize fine once, then 3 hours later a new identifier was detected and it deleted the token.
lime brook
But even then, changing tokens shouldn’t matter. It’s the unique identifier whic...
Yea uh well today
lime brook
I see that you managed to authorize fine once, then 3 hours later a new identifi...
Yea the first time but I messed up on the avatar and I was told I needed too redo the whole thing again
Would be awesome to get access again man been working on the avi all day sorry for the trouble
main knot
Well, I need to try to figure out why this is happening.
lime brook
Ofc! Take the time needed
main knot
What are the first 3 letters/numbers of your unique identifier in your settings?
lime brook
What do you mean? A little bit slow
main knot
It should be all the way at the bottom of the control panel settings, make sure that it’s set to default.
main knot
Yeah, that’s it. It’s a unique identifier for every device.
main knot
Yeah, make it default for now. You can always change it again later.
lime brook
Ok will do right now
main knot
I just need the first 3 letters/numbers.
lime brook
It’s b97
main knot
Bloodborne checks the default unique identifier when authenticating your token, not the spoofed one that’s used for uploading.
lime brook
I’m clicking default right now and it just won’t let me click it
main knot
Yes, restarting your project should show the original.
main knot
Yeah, just restart it real quick.
If not, then I guess we can’t figure out if the default changed.
And you didn’t share your token or use a different device?
lime brook
Yea still shaded out it says it’s only available if your a patreon
lime brook
And you didn’t share your token or use a different device?
No same device on my laptop
main knot
Did you create your project in a different drive?
lime brook
No same unity hub nothing different
From the token thing all the way down it’s shaded out
Some parts are shaded out
main knot
You could go to regedit and delete the Bloodborne HWID key.
lime brook
May I ask where that is at
main knot
May I ask where that is at
Type Windows + R and enter regedit, then search for HKCU\Software\Unity Technologies\Unity Editor 5.x.
Find the key that starts with Bloodborne: HWID, right click and delete it.
main knot
Copy and paste the path I sent on the search.
I don't see a search bar on yours, should be at the top.
main knot
You're looking under HKEY_LOCAL_MACHINE, make sure that it's under HKEY_CURRENT_USER.
main knot
Yes, delete it and it should be back to default on the control panel settings.
main knot
Still shaded out
Did the identifier change though?
main knot
Yeah, that should be the default now, but it's completely different from the one that authorized fine and the one that disposed your token.
lime brook
Ah ok so will I be able too generate a new token?
main knot
What version of Bloodborne are you using?
lime brook
3.0.0
main knot
Were you using a different version before?
lime brook
No has always been that one
main knot
I don't know why the default is changing when you're on the same device.
main knot
Alright, you can generate a new one.
lime brook
Will try now!
main knot
I guess I can add shorter cooldowns or more devices allowed for higher patron tiers.
lime brook
It’s having the same issue where I can’t generate a token again..
main knot
It’s having the same issue where I can’t generate a token again..
I’m trying to figure out why your identifier is constantly changing, even though you’re on the same device.
I’m also trying to come up with potential solutions like decreasing the cooldown, allowing more devices, or generating my own unique identifiers and storing them somewhere in your system that will be persistent.