And you find it where??

[copper oxide]

INVERT_E0_DIR

[neat radish]

Also is a fork of marlin. TH3D have their own sysport system https://support.th3dstudio.com/

[hazy elm]

I sorted that out swapping wires, Its latest problem's Yesterday it would do everything but move the hot end when you pressed print, Today after some fiddling Itll do everything, but press print and it drops the bed 4.5mm and prints into thin air.

[hazy hull]

It's a long shot, but try dropping the Z acceleration with M201 Z and see if you get different results.

[hazy elm]

Im on a full klipper convert mission. Brought the Pad 7 which i had to buy a secondary router for as SkyHub rubbish wouldnt let anything connect through it. New router no problems straight out the box. Also got a MKS board coming along with a new powersupply unit as a tiny washer fell off the bed and some how shorted the PSU so its only kicking out 13.2volts instaed of 24v. More money but now i can connect which will be a immense help flashing.

[hazy hull]

I hear that those Bambu printers are all ready to go straight out of the box. Another good option.

[hazy elm]

I think with the amount of money ive spent on BTT stuff i could have brought one cash lol. Ive been messing with it but it still does it. Its not the boards fault, its mine. Ive been trying but i think ive made it worse. I should have stuck to wood turning, i was good at that. lol Youtubes a bad place, Makes it all look so simple but its the rest of the stuff behind the scenes that fry your mind if your not clued to it. I just got my hands on a new Raspberry pi4b, Even thats a mission, Its all flashed and ready to run but can i get the desktop? Im definatly missing an important piece and need someone who knows to come and help me out. But none of my friends are into 3d printing and more into Motorcycles and Trucks.