How to run a ping test (PingPlotter)

[chilly yew]

Running a traceroute to/from Shadow

Designed to help determine potential network issues

For a more in-depth guide for all operating systems see the guide from the Community Wiki https://wiki.shdw.info/w/PingPlotter

Note that the commands in step two (2) below are Windows-specific,
but there are comparable commands for other OSes

1. Traceroute from Shadow to your Local IP
   a. On your local PC navigate to http://lg.shadow.tech/
   b. Select your data center (for Router to Use)
   c. Select traceroute (for Command to Issue)
   d. Take a screenshot of the results Windows + Shift + S or using your preferred screenshot tool
   e. Send to a Shadow Experts or Moderator

2. Traceroute from your local IP to Shadow
   a. On your local PC press Windows + R
   b. Type cmd then click OK
   c. Type in the following text without quotations or square brackets "tracert [insert IP here]"
   * The IP list for the data centers (choose the right one):
   * Go to: http://eth0.me/ for your Shadow IP address
   d. Wait up to 2 minutes for the test to complete
   e. Take a screenshot of the results Windows + Shift + S or using your preferred screenshot tool
   f. Send to a Shadow Experts or Moderator

[native forge]

I followed that step but I need to know which addresas I need to ping and if I need to do it from my source PC or the VM?

Thank you

[rare raven]

i did it for all 3 addresses on north america