tall inlet
Just yesterday I logged on and my objective frame was overlapping my minimap and when I go to move it it stays locked to the top of the screen no matter where I move it it just drags across the top of my screen, same in my laptop it’s doing the same thing.
clear gyro
Edit mode isnt fixing it?
tall inlet
No it just goes horizontal across the top it won’t go down at all
clear gyro
Can you share a pic with you using the Blizz edit mode?
tall inlet
stable geyser
Just yesterday I logged on and my objective frame was overlapping my minimap and...
eltruism > installer > import edit mode layout
reload
done
that means on the elvui options
not the popup installer, but elvui > eltruism > installer
tall inlet
Oh thanks that worked!
Well kinda, not it just goes horizontal from where it’s at now
stable geyser
move it with /moveui
stable geyser
go into edit mode
tall inlet
Heres*
stable geyser
show your profile in there
esc > edit mode (right click)
also, if you enter that menu, make sure to always reload once you exit
tall inlet
Everytime I reload it goes back I’ll show you
stable geyser
you skipped one step
stable geyser
show your profile in there
you didnt post this
stable geyser
do /eltruismdebug on
tall inlet
1 39 0 0 1 7 7 UIParent 0.0 45.0 -1 ##$$%/&('%)#+$,$ 0 1 1 6 0 MainMenuBar 0.0 5.0 -1 ##$$%/&('%(#,$ 0 2 1 6 0 MultiBarBottomLeft 0.0 5.0 -1 ##$$%/&('%(#,$ 0 3 0 0 0 UIParent 2786.7 -396.0 -1 #$$$%/&('%(#,$ 0 4 0 0 0 UIParent 2737.7 -396.0 -1 #$$$%/&('%(#,$ 0 5 0 1 1 UIParent 558.3 -962.0 -1 ##$$%)&('%(#,$ 0 6 1 1 7 MultiBar5 0.0 0.0 -1 ##$$%/&('%(#,$ 0 7 1 1 7 MultiBar6 0.0 0.0 -1 ##$$%/&('%(#,$ 0 10 1 6 0 MainMenuBar 0.0 5.0 -1 ##$$&('% 0 11 1 6 0 MainMenuBar 0.0 5.0 -1 ##$$&('%,# 0 12 1 6 0 MainMenuBar 0.0 5.0 -1 ##$$&('% 1 -1 1 4 4 UIParent 0.0 0.0 -1 ##$#%# 2 -1 0 0 0 UIParent 2601.7 0.0 -1 ##$#%( 3 0 0 3 3 UIParent 875.3 534.9 -1 $#3# 3 1 0 1 1 UIParent 402.0 -11.5 -1 %#3# 3 2 0 1 1 UIParent 487.7 -588.0 -1 %## 3 3 0 0 0 UIParent 1075.3 -422.0 -1 '$(#)#-E.5/#1$3' 3 4 0 0 0 UIParent 639.3 -422.0 -1 ,#-).+/#0#1#2( 3 5 0 2 2 UIParent -402.0 -271.0 -1 &$$3# 3 6 1 5 5 UIParent 0.0 0.0 -1 -#.#/#4& 3 7 1 4 4 UIParent 0.0 0.0 -1 3# 4 -1 1 7 1 MainMenuBar 0.0 5.0 -1 # 5 -1 1 6 0 MainMenuBar 0.0 5.0 -1 # 6 0 1 2 0 MinimapCluster -10.0 -10.0 -1 ##$#%#&.(()( 6 1 1 2 8 BuffFrame -13.0 -15.0 -1 ##$#%#'+(()( 7 -1 0 1 1 UIParent -16.4 -14.1 -1 # 8 -1 0 6 6 UIParent 35.0 50.0 -1 #($%$&l 9 -1 1 6 0 MainMenuBar 0.0 5.0 -1 # 10 -1 1 0 0 UIParent 16.0 -116.0 -1 # 11 -1 1 8 8 UIParent -9.0 85.0 -1 # 12 -1 0 0 0 UIParent 2498.7 -271.0 -1 #K$#%# 13 -1 0 0 0 UIParent 2634.7 -1168.0 -1 ##$#%)&- 14 -1 0 0 0 UIParent 2633.7 -1114.0 -1 ##$#%( 15 0 1 7 7 StatusTrackingBarManager 0.0 0.0 -1 # 15 1 1 7 1 MainStatusTrackingBarContainer 0.0 0.0 -1 # 16 -1 1 5 5 UIParent 0.0 0.0 -1 #( 17 -1 1 1 1 UIParent 0.0 -100.0 -1 ## 18 -1 1 5 5 UIParent 0.0 0.0 -1 #- 19 -1 1 7 7 UIParent 0.0 0.0 -1 ##
stable geyser
1 39 0 0 1 7 7 UIParent 0.0 45.0 -1 ##$$%/&('%)#+$,$ 0 1 1 6 0 MainMenuBar 0.0 5...
not that
i meant what you are using
try the debug mode
tall inlet
its on just didnt change anything
frigid phoenix
Also, please use the screenshot tool in your OS (if you're on windows, windows+shift+s should open the Snipping Tool). These pictures make everything harder
stable geyser
step 1:
press enter, type /eltruismdebug on, reload
try moving the objective tracker with /moveui, do not open blizzard's edit mode at all, reload
stable geyser
still just runs horizontally
post a picture of /estatus
and record it with only eltruism
stable geyser
you did it wrong again
but ok heres what you'll do now
disable eltruism
go into edit mode, move the objective tracker and change its height
enable eltruism, make sure the anchor is also enabled
reload
tall inlet
oh well i did it the way you said originally i just made the video to show what its doing right now but sorry about that if you wanted the video of the first time
ill try that one sec
that didnt change it
stable geyser
not sure then why its only happenning to you
can you try another profile
by profile i mean elvui profile
tall inlet
ok one sec
went to trenchys profile and oddly it doesnt move at all
ill try a different one
stable geyser
pretty sure this means there is something wrong with your profiles
tall inlet
yea i went to jiberishui winterchill profile and it also does the same with going horizontally and thats it
alright well maybe ill just stop using elvui, i get tons of Lua errors anyway since expansion so i dunno
stable geyser
you'll get errors even if you stop using elvui
11.0 is full of issues
anyway, export your profile and ill take a look
stable geyser
it works completely fine, so it has to be something on your end
ok i got your profile, deleted because of it being jiberish's
let me test
tall inlet
ok
stable geyser
indeed, on that profile its bugged
so its the profile
@tall inlet ok i think i know why
your max height is too high
tall inlet
oh i did lower it and tried it and it didnt work so i put it back but maybe i didnt lower it enough lemme try to really lower it
stable geyser
its because i made it clamp to screen
so that it wouldnt fly off screen
but i guess people set the heigh way too high and that makes it so it cant go off screen at all
@tall inlet go into my discord and grab the dev version
should be fixed there
tall inlet
oh ok thanks ill try that
lone finch
I'm having the same issue. Glad to see it's not just me
stable geyser
I'm having the same issue. Glad to see it's not just me
as mentioned, go into my discord and grab the dev version
fathom quest
as mentioned, go into my discord and grab the dev version
May I please also get assistance on this? Wasn't sure if we're allowed to DM mods. In fact, my UI, unlike in your video can literally only move the bottom left chat window with my mouse and nothing else.
The Campaign and objective frame are immovable
stable geyser
May I please also get assistance on this? Wasn't sure if we're allowed to DM mod...
if you use my anchor you move the objective frame in elvui's movers
