pale trench
I have a Raspberry Pi 3B+ combined with Octopus Pro V1.1. Running latest Klipper on MainsailOs.
Connected to the Pi are BTT HDMI7 and the Octopus.
Running stable until I start printing. Out of nothing the Pi does a restart and I tried various things to see what the issue could be:
Im running out of Ideas and thought asking here might help if someone encountered something similar.
mystic ravine
I have a Raspberry Pi 3B+ combined with Octopus Pro V1.1. Running latest Klipper...
What’s providing the power to the gpio?
How many wires are connected to the gpio?
Could you provide some pictures of the electronics bay?
Have you been with the printer when these restarts happen and notice what happens with fans and LEDs and such?
pale trench
What’s providing the power to the gpio?
How many wires are connected to the gpi...
I've got a meanwell 5v 3a psu connected to the gpio.
It's 2 wires, so positive and negative connected to pin 2 and 6.
I can provide a picture, but probably not before tomorrow as I am not at home today.
I've been next to the printer each time, it just stops printing. The hdmi freezes and all of a sudden I get the boot sequence of the pi showing on the screen. Fan stops as well. I've haven't been able te record it as it's kind of random (4%, 6%, 14% in print)
mystic ravine
If fans are stopping that’s concerning for power issues
pale trench
I'll have to verify. I will look at it again and even try to record it. Hopefully tomorrow, otherwise next week.
mystic ravine
I'll have to verify. I will look at it again and even try to record it. Hopefull...
If you’re struggling to get help you can always open a v2 ticket in #request_help
pale trench
I will. First will collect more details and post them here, after I can try the request help