config assistance | VORONDesign | Page 1

bleak temple Jun 6, 2026, 3:19 AM

#

Hi all,
Would there be anyone that has a file or can assist with creating a config to suit my printer build?

Ive got a 350mm 2.4 i've built but trying to blend a config together is doing my head in.

hardware on it currently is Octopus pro 1.1 (STM32H723) MCU, LDO nighthawk SB toolboard, Phaetus Rapido V1, omron proximity probe (plan to change to beacon when i can afford one and this is up and running)

i just need a config that will work or assistance on how to make one that works with both MCU's.

i thought the nighthawk were a rp2040 chip but the two mcu's that show up when i ssh "ls -l /dev/serial/by-id/" the 2nd mcu shows a STM32g0blxx address?

Thanks

fierce orbit Jun 6, 2026, 4:30 AM

#

Nitehawk v1 is an rp2040. Nitehawk v2 they switched to the stm32

#

(For the higher temperature rating, iirc)

bleak temple Jun 6, 2026, 5:16 AM

#

fierce orbit Nitehawk v1 is an rp2040. Nitehawk v2 they switched to the stm32

ah nice, thanks for that. thats good to know. that solves one question. Now to figure out the config file

#config assistance