Homing issues.

[primal silo]

I am using ldo awd setup, and can’t get the x or y axis to home. they just vibrate. see video

[sullen raft]

Is the motor order correct?

Looks like they fight each other

[noble condor]

have you done your stepper_buzz tests on all the motors?

[primal silo]

i think I have them set up correctly, left back b, right back a, left front a1, right front b1. If I change the rotation direction of one of the diagonally opposite motors, for example a1 and b1, might that do it?

[primal silo]

Could someone have a look at my printer cfg file please, specifically about the x and y motors. When homing currently I have the x axis moving in the right direction, but the end stop doesn't work whichever way I have it, open or closed, but the y axis moves in the wrong direction, ( to the front of the printer). Same problem with the end stop.

[noble condor]

you need to actually test the motor directions as mentioned above

[primal silo]

Yes I have, but which direction is the correct direction, clockwise or anticlockwise? Should all the motors be rotating in the same direction?

[noble condor]

stepper_buzz when correct will always turn the motor clockwise first