Voron 2 Sheet Stop

[cerulean field]

Bed sheet stop for Voron 2.
Mount to bed extrusions with M5x16 and a tnut.
Use an M3x12 SHCS for the stop. If mounted to the inner holes it lines up with Prusa Core One L 300mm sheets.

[crude fern]

Hi @cerulean field what have you printed those from? It seems to be rather close to hot bed 😄 is PC or PC-CF recommended?

[elder mulch]

And if you have any spares I'd love some for my 250. Never printed PC

[cerulean field]

Fair point, I printed mine in PPS-CF but I suspect they'd be fine in a good ABS.

[cerulean field]

Per the point above, give it a try with ABS and let me know if you have any problems with it 🙂

[elder mulch]

I'll give it a shot! the red we got at VICE is supposed to be a higher temp resistance right?

[cerulean field]

yes

[steady vale]

Just installed them, and unless you let your sheet stick out a bit behind, they actually touch the bed. Printed mine in ABS, will see how they hold up, it is not a critical component

[pastel ravine]

I have a purge bucket on my Micron printed out of ABS. It touches the bed. No issues so far.