Voron 2.4r2 skirts with modeled hexagon mesh

[wary drift]

These are the stock Voron 2.4r2 skirts that have hexagons modeled into a mesh into them without having to do slicer hacks.

Also available on Printables: https://www.printables.com/model/1348206-voron-24r2-skirts-modeled-meshes

License: GPL3 https://www.gnu.org/licenses/gpl-3.0.en.html

[wary drift]

New version attached. Updates:

• Hexagons are now centered within each hexagon instead of being based off one and patterned across piece
• Hex size changed from 3mm radius (6mm diameter) inscribed polygons to 2.5mm radius (5mm diameter) circumscribed polygons, wall width between changed from 1mm to 1.2mm.
• Depth of mesh changed from 3.6mm to 2mm.
• Included side skirt mesh inserts that are printed separately and match. Thanks to Steve for providing these!

[copper goblet]

Any chance to create a mod that will work for the Z drive tension mod? Seen here: https://www.printables.com/model/838991-voron-v24-z-drive-motor-tensioner-mod-top-and-bott

[wary drift]

if you have a 250, there was cad on the original one that was remixed onto printables, that was an easy swap over of the hex bodies. so here, have those 🙂

[copper goblet]

I was able to convert the STLs from the link I posted and add your hex meshes and only had to delete one mesh body, but they dropped right into the openings in the .step file I had made. So thanks for the original hexes!!