Formbot voron 2.4 kit with tap and can. klipper shows "Option 'pin' in section 'probe' must be specified". no save config as i am doing the startup check. this is the only [probe] section in printer.cfg and ...canbus.cfg please help
#Option 'pin' in section 'probe' must be specified
civic lodge
slender dragon
Formbot voron 2.4 kit with tap and can. klipper shows "Option 'pin' in section '...
do u want to continue this here or do u prefer german --> #landofschnitzel-🇩🇪
i dont care
civic lodge
do u want to continue this here or do u prefer german --> <#460819549202284553>
lets continue here so more people get access to the eventual solution
full printer.cfg and btt can.cfg files:
slender dragon
lets continue here so more people get access to the eventual solution
ok, where did u get this config from? because there is no sensor_pin in probe
civic lodge
ok, where did u get this config from? because there is no sensor_pin in probe
i got it from https://github.com/bigtreetech/EBB/tree/master/EBB SB2209 CAN (RP2040) but i did a mistake when changing the config. i see the issue now. so with tap i only need one "pin" without sensor_pin and control_pin, right?
slender dragon
i got it from https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2209%20CAN%...
no clue how u managed to put sensor as well as control pin in there
that sounds like ChatGPT
civic lodge
that sounds like ChatGPT
i did not use chatgpt for anything. my mistake was that i was looking into bl touch config when setting up tap
civic lodge
see https://www.klipper3d.org/Config_Reference.html#probe
this helped and fixed the issue, thank you
slender dragon
i did not use chatgpt for anything. my mistake was that i was looking into bl to...
that explains it but the section is called "bltouch" isnt it 🙂 so it doesnt make sense to be used as bltouch and tap work totally different.
slender dragon
this helped and fixed the issue, thank you
welcome.
feel free to ask such easy things in #landofschnitzel-🇩🇪 and also come say hi