Benchy has missing PLA at the bow point

[north folio]

Printing a benchy using an LDO Voron 2.4 300mm kit with a Rapido 2 UHF, Hatchbox PLA.

I'm seeing an odd thing where the bow makes a point, about 1/3 of the way up the print. See photos. It looks like acid is eating away the hull. There is also "missing" PLA in a 3mm band on the left side of the benchy that leads into the bow.

Any idea what setting might need a tweak to fix this? The rest of the print is fine except for some mild ringing. Thanks, all!

[twilit pewter]

underside of the bow tends to point to cooling issues, although some of what you're seeing may also be "benchy hull line"

a better channel for this sort of query would be #slicers_and_print_help for future reference

[quiet karma]

ime, that's a definite indication of not enough cooling

[north folio]

ah, good call, thank you

[north folio]

TIL about benchy hull line, and thanks for the cooling note. I'll ramp it up

[north folio]

awesome, thank you, that's two votes for cooling so I need to fix that

[quiet karma]

if you wanna know more about the benchy hull line, here's a good article

[north folio]

That's wild. Thank you so much!