my cpap fan defaults to being fully on and when i throttle the slider to 100% thats when it gets shut off, kinda like its backwards 0 is full speed and 100 is full stop. so how do i change it so that it defaults to being shut off and functions like a normal part cooling fan
#CPAP fan config help
torpid jolt
serene ivy
my cpap fan defaults to being fully on and when i throttle the slider to 100% th...
Without a Klipp.log, multiple pictures of your wiring (at least 4 pictures), and a link to the cpap fan where u bought it, no one can really help
serene ivy
my cpap fan defaults to being fully on and when i throttle the slider to 100% th...
All we can do is play the guessing game
And guessing is based on luck
torpid jolt
word give me a sec
serene ivy
The more u provide
The more u go in detail
The better out help will and can be
Makes sense, doesn’t it?
torpid jolt
first of all its a biqu universal cpap
[fan]
pin: PA8
max_power: 0.8
shutdown_speed: 0
cycle_time: 0.005
hardware_pwm: False
kick_start_time: 0.100
off_below: 0.1
here are the config settings\
serene ivy
Check what i wrote here #1378692889713840198 message
those are the bare MINIMUM of things we need.
Think about a few minutes what could be useful for someone who has no clue about your setup or printer at all
torpid jolt
You still want a picture of the wiring it’s messy but I can explain it to you
I’m using a octopus v1 controller board
Hooked up to the PA8 fan pin
the wiring seems perfectly fine, im able to get full control but i think i just botched the config
and Im really sorry but I'm just not sure what klipp.log is, but if you told me i could prob get it for you @serene ivy
let me know if you need anything else and thank you for responding so soon
serene ivy
let me know if you need anything else and thank you for responding so soon
Cmon man
Didnt i say at least 4 pictures?
And it would be great if u could use MS paint or whatever to highlight where CPAP is connected
serene ivy
and Im really sorry but I'm just not sure what klipp.log is, but if you told me ...
Under the machine tab
Rollover the klippy log first
And before uploading pictures (plural) please review them first to verify good camera focus as well as lighting
torpid jolt
Cmon man
my fault, just needed a lil sleep is all give me a sec to get the pics and the klippy ready
serene ivy
my fault, just needed a lil sleep is all give me a sec to get the pics and the k...
All good, we are not in a rush here
Klippy log please as well
serene ivy
so how do i get the actual logs themselves
I posted and explained it above
Rollover clears them and lets klippy create a fresh one
So its not insane in size
torpid jolt
i did the rollover what now
serene ivy
https://github.com/bigtreetech/Universal-Turbo-Kit
just to confirm, u followed the manual as well as Firmware which is provided there?
serene ivy
i did the rollover what now
Download and upload it here 😅
torpid jolt
the printer config?
serene ivy
The klippy log
torpid jolt
where can i download the file
serene ivy
There is a big download button below the rollover
Its all in my screenshot
It literally says „log file“ at the top
torpid jolt
what folder does that download to
serene ivy
I have no clue about your pc
torpid jolt
what would the file be called ill just do a search for it
torpid jolt
serene ivy
Thank you
torpid jolt
no problem
serene ivy
Before i have a look at it, could u please answer my question above?
serene ivy
Sorry no, this #1378692889713840198 message
torpid jolt
yeah I used that firmware
serene ivy
Why are u using dupont on a jst header?
And the jst i circled in red is not properly crimped
torpid jolt
my bad
my more recent project has better crimps I swear
i bought an engineer crimper
serene ivy
bltouch? Which VORON is this?
torpid jolt
im using a vz toolhead and this isn't my voron, but the people in this discord are very active this is my mercury one
serene ivy
Meeeh, that’s something u always have to tell people here upfront
Its the VORON discord, people expect a VORON
torpid jolt
my fault, Ill do better next time i need help
serene ivy
The mercury discord also exists, are u aware of that?
Im sure they have a help thread as well
torpid jolt
yeah but its not nearly as active
I'd be very grateful if you did help, plus itd help when i install another one of these cpap fans to my v2
so its like your helping me with a voron indirectly
serene ivy
why is on FAN0 only GND connected and not V+ aswell?
the upper part doesnt matter for us as a fan port cant provide enough amps for the CPAP, so it must be hooked up to the PSU, as shown in the manual.
so the lower port gets connected to a free fan port
torpid jolt
because its connected to power out of the power supply and it only needs that pin for communication with the board
serene ivy
im pretty sure it also needs Voltage for the onboard logic to work
u can propably fix it by inverting the pin but thats not the right solution here
torpid jolt
yeah i don't have that board with the wago clips
torpid jolt
i know i have all the other parts
serene ivy
then i cant 100% help here , sorry.
i only know how it works with the pcb shown above. there are more components on that PCB than just the WAGOs
torpid jolt
i mean it powers up and can be throttled just fine
serene ivy
as i said, u can try flipping the logic via inverting the pin, but thats not the correct solution imo