Enderwire Rebuild | VORONDesign | Page 1

nova night Mar 2, 2025, 3:41 PM

#

Time to rebuild the poor old enderwire! It has spent the last 1.5yrs bouncing around and being stolen from. New electronics are on the way now and I’ve begun disassembly.

#

This poor thing has collected a lot of dust

#

Electronics on the way with birthday money and I’m using a btt pi v1.2 that I got from West3d in a witfb.

#

Current progress of disassembly.

#

Clearly. This upside down rail is the whole reason this printer got stolen from. hehe

burnt bolt Mar 2, 2025, 3:43 PM

#

nova night Clearly. This upside down rail is the whole reason this printer got stolen from....

The only reason

nova night Mar 2, 2025, 3:43 PM

#

I’m excited to get this printer working again. The plan is for this printer (instead of the trident that was supposed to be) to be my ole reliable printer.

burnt bolt Mar 2, 2025, 3:44 PM

#

Having a reliable printer does help

#

And don’t realy think the trident is doing that indeed

#

Do you have any funky plans with it or just keeping it mostly stock?

nova night Mar 2, 2025, 3:46 PM

#

Well there’s nothing really “stock”. Lol. But I am using SB still for it.

#

Well that part was incredibly weak. But those 2 screws are stripped so I had to remove it somehow. 😅

#

Screw stuck on extractor…

#

First time that extractor set actually worked. 🤣

#

Top hole is unusable. Bottom hole just needs a shorter screw. Not a problem! Whoo!

#

Time to move a whole lot of heat sets to the new parts.

stoic brook Mar 3, 2025, 4:16 AM

#

Guess I have to follow this one too 😆

nova night Mar 3, 2025, 4:29 AM

#

stoic brook Guess I have to follow this one too 😆

At least this one won’t (shouldn’t) last 6 months. 🤣. Should have it printing by Tuesday. Assuming Amazon delivers on time.

stoic brook Mar 3, 2025, 4:29 AM

#

nova night At least this one won’t (shouldn’t) last 6 months. 🤣. Should have it printing b...

Oh very nice, quick rebuild

nova night Mar 3, 2025, 4:30 AM

#

stoic brook Oh very nice, quick rebuild

Yea. With the X1C and very few parts that actually need printed this should go smoothly. As long as I don’t find yet another stuck bolt that is.

nova night Mar 3, 2025, 7:27 AM

#

Working on some more disassembly right now as well as moving heat sets over to the new parts. I’m disappointed in myself rn. I have found numerous screws that weren’t tight at all and was even missing the anti shock cover over the psu inlet.

nova night Mar 3, 2025, 7:45 AM

#

Would you look at that. Anti shock cover. Lol.

nova night Mar 3, 2025, 8:14 AM

#

Those look so much better than the old solid black ones.

#

An example of why I’m reprinting this entire printer.

nova night Mar 3, 2025, 9:18 AM

#

Okay. Gonna print my gantry parts (should all fit on one plate) then get started printed deck panel parts. Since those will take 3 hours each and I need 4 deck panel parts. May pause the panels halfway (like after the first 2) and print electronics mounts.

#

Or maybe panel parts wait till after the printer has electronics… 9.5 hours for the gantry. 😅

#

Actually you know. I have more than one working printer. Let’s print the electronics mounts on… Doron Velta! (I dunno why Doron. It’s just the only one that’s in use atm. Lol)

burnt bolt Mar 3, 2025, 9:59 AM

#

cool to see it get some use :p

nova night Mar 3, 2025, 10:10 AM

#

Yea. I don’t use it often. But it’s nice when I do use it to have it.

burnt bolt Mar 3, 2025, 10:11 AM

#

fairsies

#

delta printers do also seem like they would be cool to just watch

nova night Mar 3, 2025, 10:11 AM

#

I am considering a second X1C in the future though. It’s very handy. Lol.

burnt bolt Mar 3, 2025, 10:11 AM

#

fairsies

#

helps when it works most of the time doesnt it :p

nova night Mar 3, 2025, 10:12 AM

#

burnt bolt delta printers do also seem like they would be cool to just watch

Definitely fun to watch.

76268951400__22A02EFE-BF6E-4F3D-BEE7-366CE4C51D90.mov

#

Completely untuned. Still. Lol.

burnt bolt Mar 3, 2025, 10:13 AM

#

fairsies lol

#

tuning do be important

#

ngl would be cool if there ever was a mainline voron delta

nova night Mar 3, 2025, 10:17 AM

#

Print restarted as I had an issue with the adxl345 and forgot to set the flow ratio and pa in orca for this printer. Lol

nova night Mar 3, 2025, 10:17 AM

#

burnt bolt ngl would be cool if there ever was a mainline voron delta

That is basically the Doron Velta.

nova night Mar 3, 2025, 10:26 AM

#

burnt bolt tuning do be important

There we go. Proper first layer now.

#

Getting the btt pi v1.2 setup now. Went with minimal image and am installing the minimums I need with kiauh.

burnt bolt Mar 3, 2025, 10:31 AM

#

That helps

#

It’s making some funky sounds :p

burnt bolt Mar 3, 2025, 10:31 AM

#

nova night Getting the btt pi v1.2 setup now. Went with minimal image and am installing the...

kiauh is so nice for installing stuff ngl

nova night Mar 3, 2025, 10:31 AM

#

burnt bolt It’s making some funky sounds :p

That’s probably the X1C next to it you can hear. Lol.

burnt bolt Mar 3, 2025, 10:31 AM

#

fair lol

nova night Mar 3, 2025, 10:33 AM

#

burnt bolt kiauh is so nice for installing stuff ngl

It is. Especially for getting just the bare minimums going.

burnt bolt Mar 3, 2025, 10:33 AM

#

yup definetly

#

it isnt realy hard normaly but just annoying

nova night Mar 3, 2025, 10:42 AM

#

Why does mainsail change on every freaking install?!

#

Pi is setup and ready to go. Just need to get the can network on it and it’ll be golden. Obviously I have to wait until I get the can adapter for it to do that. Lol.

nova night Mar 3, 2025, 8:48 PM

#

Looks like I’m not getting my Amazon delivery today. Stupid Amazon. At least that gives me one more day to finish the rebuild.

nova night Mar 4, 2025, 2:01 AM

#

Apparently they did deliver! Hooray! lol

nova night Mar 4, 2025, 2:17 AM

#

I still can’t believe how small the skr pico is. Lol.

nova night Mar 4, 2025, 4:30 AM

#

Working on greasing the carts and I only wanted to remove one of the rails. This looks funny on such a short rail. Lol.

#

This rail. Is now the right way up. Lol.

nova night Mar 4, 2025, 5:05 AM

#

Made a mount for the btt pi and skr pico. The stupid btt pi has different hole spacing than a normal pi. And I didn’t check. stitch_facepalm . Time to print another one.

#

I have decided to swap out the old creality motor and the 2 siboor motors for the 2004s motors I took off the trident.

#

XZ axis replaced! Whoo! Moves so nicely.

nova night Mar 4, 2025, 6:07 AM

#

Hooray! A couple of the electronics mounted!

nova night Mar 4, 2025, 8:14 AM

#

We have a Y axis! Don’t mind the non matching screw. Totally didn’t strip another screw. Not at all. Couldn’t be me.

#

And that’s all the electronics in the electronics bay now! (Ignore the fan wire sticking out of the psu)

nova night Mar 4, 2025, 8:40 AM

#

And I was about to start belting the XZ but realized I missed a part for mounting the toolhead carriage. Ugh. Lol.

nova night Mar 4, 2025, 12:15 PM

#

I have fully installed the heat bed and build plate!

nova night Mar 4, 2025, 5:32 PM

#

@stoic brook You always comment about my wiring. How’s this?

#

Had to breathe a sigh of relief when it powered up. Took a second and I got concerned. 😅

stoic brook Mar 4, 2025, 5:40 PM

#

nova night <@303685592133271553> You always comment about my wiring. How’s this?

Cleaner than mine, although that’s a very low bar lol

nova night Mar 5, 2025, 2:17 AM

#

Well. Amazon has decided to not deliver my btt Eddy on time. They have delayed it to Thursday. Guess I’m gonna use the old omron for now even though I’d prefer not to.

nova night Mar 5, 2025, 6:08 AM

#

It ain’t perfect but I got the cable door closed!

nova night Mar 5, 2025, 6:31 AM

#

My method of preventing bed and toolhead movement when I flip the printer. Don’t want the motors to turn so fast I blow the pico.

nova night Mar 5, 2025, 7:13 AM

#

Ugh. Probe is too high. Have to move it down. I even set it where the manual showed!

#

Video of first moves coming soon.

nova night Mar 5, 2025, 9:12 AM

#

It’s alive!

#

@solemn ingot Mind sharing with drift this sb front of his that I combined with the hex accent? It’s so pretty!

nova night Mar 5, 2025, 11:23 AM

#

As wrong as it is. I’m gonna order some winsinn fans to replace all the fans on the printer with. I want it even quieter. This is an old v6 hotend anyways so it should be perfectly fine with a winsinn he fan. Lol.

#

I’m also gonna be ordering a bolt on panel kit and I hated the vhb style enclosure. Think that will be good.

#

@bleak gulch Sorry for pinging you so much but this deck panel is gonna look awesome!

bleak gulch Mar 5, 2025, 11:51 AM

#

nova night <@490535095183212564> Sorry for pinging you so much but this deck panel is gonna...

indeed it looks awesome!

nova night Mar 5, 2025, 2:14 PM

#

I was gonna go with aluminum spacers instead of springs or silicone spacers but the mesh was a full mm range. So I swapped back to the silicone spacers and…

#

nova night Mar 5, 2025, 2:59 PM

#

Look who has a bottom panel! (And still only 1/4 of a deck panel. 🤣)

nova night Mar 5, 2025, 3:16 PM

#

We also have a display again!

#

The btt eddy cannot come faster. 🤣

#

First print!

nova night Mar 5, 2025, 3:47 PM

#

@wide oracle It lives again!

nova night Mar 5, 2025, 4:28 PM

#

The btt eddy for this printer just went out for delivery! Hooray!

#

Need to actually tune everything but it’s not bad!

nova night Mar 6, 2025, 6:20 AM

#

Got the btt eddy installed!

#

Also got the front deck panels installed!

vital cloak Mar 6, 2025, 9:37 AM

#

The deck panels came out great chefkiss

nova night Mar 6, 2025, 3:19 PM

#

Hotend choice I think for if and when I can afford to buy a new hotend.

burnt bolt Mar 6, 2025, 3:21 PM

#

Revo noice

#

Definetly reliable

nova night Mar 6, 2025, 3:24 PM

#

burnt bolt Revo noice

And pt1000 version. So it’ll make me happy. Lol.

burnt bolt Mar 6, 2025, 3:24 PM

#

Fair lol

#

You planning on using lots of different nozzles?

nova night Mar 6, 2025, 3:25 PM

#

Not really. Just want something with pt1000 and reliable. And isn’t a clamp mount v6. 🤣

burnt bolt Mar 6, 2025, 3:26 PM

#

Fair lol

#

If you do wanna switch nozzles more often would highly recomend a .15 nozzle because wow can you make pretty parts with it

#

Extremely slow but definetly worth it when you need detail

nova night Mar 6, 2025, 3:27 PM

#

Extremely slow is perfectly fine with this build. Idea is to never turn off stealthchop. Lol.

burnt bolt Mar 6, 2025, 3:27 PM

#

Fair lol

#

Revo definetly has a lot of cool stuff

nova night Mar 6, 2025, 3:28 PM

#

That’s also why I’m getting winsinn fans for it. They are silent. Lol. They just don’t move a lot of air. So need hotends that won’t mind a 4010 fan. So Revo it is.

burnt bolt Mar 6, 2025, 3:29 PM

#

Yea Das fair

#

Wasn't it schlonky who's HEF broke fully broke and revo only clogged after like a couple hours

nova night Mar 6, 2025, 3:30 PM

#

No idea. I do remember @upbeat zenith obxidian nozzle going plop after becoming a flamethrower. 🤣

burnt bolt Mar 6, 2025, 3:30 PM

#

Lol

upbeat zenith Mar 6, 2025, 3:31 PM

#

burnt bolt Wasn't it schlonky who's HEF broke fully broke and revo only clogged after like ...

I actually disabled it in the config for something, and forgot to enable it again

burnt bolt Mar 6, 2025, 3:31 PM

#

Fair lol

#

Close enough

nova night Mar 6, 2025, 3:50 PM

#

I did realize the other day. If it weren’t for the display. There wouldn’t be one board that doesn’t have a rp2040 in the printer. Except for the pi ofc. But it’s running a skr pico (which is rp2040), sb2209/rp2040, and eddy duo (which is also rp2040). If the display also had an rp2040 then there wouldn’t even be one stm32. Lol.

upbeat zenith Mar 6, 2025, 4:00 PM

#

nova night I did realize the other day. If it weren’t for the display. There wouldn’t be on...

https://github.com/th0mpy/Voron0-2040-display?tab=readme-ov-file

GitHub

GitHub - th0mpy/Voron0-2040-display: RP2040 port of the Voron0 display

RP2040 port of the Voron0 display. Contribute to th0mpy/Voron0-2040-display development by creating an account on GitHub.

nova night Mar 6, 2025, 4:07 PM

#

upbeat zenith https://github.com/th0mpy/Voron0-2040-display?tab=readme-ov-file

Could work. But this display is a smidge bigger. Lol. It’s got a stm32 display adapter plugged into it. A version of that with rp2040 would be easier.

nova night Mar 6, 2025, 4:35 PM

#

I’ll be ordering a dark mode bolt on panel kit for the enderwire from KB3D but with clear doors it looks like! Hooray! Just want I wanted.

nova night Mar 6, 2025, 5:07 PM

#

burnt bolt Revo definetly has a lot of cool stuff

And I just realized (I thought it was true but couldn’t tell for sure) that the heat block I’m planning on for my Revo has replaceable heaters and thermistors. Even better!

nova night Mar 7, 2025, 9:09 AM

#

Panel set has been ordered!

solemn ingot Mar 8, 2025, 12:46 AM

#

nova night <@1325948108382797824> Mind sharing with drift this sb front of his that I combi...

i will be sure to pass this on to him👍

nova night Mar 8, 2025, 4:23 AM

#

Enclosure will be here on the 12th! Hooray!

nova night Mar 8, 2025, 6:45 AM

#