Printer stopped working after Wi-Fi change. | VORONDesign | Page 1

urban thistle Jan 11, 2025, 9:15 PM

#

My 2.4 was working fine until one day I came home to the Wi-Fi password changing. Obviously the printer can't connect if the Wi-Fi info is different.
So, I used the raspberry pi imager and reinstalled it with the new password. After repeating several times it still didn't work. Then I changed the Wi-Fi password back to the original and tried changing it back on the pi as well. But I still can't find the printer on the network.

Maybe I'm doing something wrong, but it was working before. I need options for accessing and using my printer.

supple seal Jan 11, 2025, 9:46 PM

#

urban thistle My 2.4 was working fine until one day I came home to the Wi-Fi password changing...

do you have a touch display on the printer? if so you can configure the network settings there

urban thistle Jan 11, 2025, 11:30 PM

#

No, I only have the small display that came with a kit

molten sphinx Jan 11, 2025, 11:47 PM

#

@urban thistle The ip is dynamic on a raspberry pi

#

Try connecting ur pi to ethernet then using advanced ip scanner to find its ip

#

Ip address may have changed when it was imaged again

urban thistle Jan 11, 2025, 11:56 PM

#

Ok, I'll try that. Thank you.

molten sphinx Jan 12, 2025, 1:08 AM

#

lmk if that does the trick, it's what i had to do after reimaging

molten sphinx Jan 12, 2025, 4:50 PM

#

@urban thistle that do the trick?

urban thistle Jan 16, 2025, 6:11 PM

#

I haven't had the chance to buy a cable. I think I'll do it this weekend. I'll let you know.

#Printer stopped working after Wi-Fi change.