fierce fiber
Hi to all,
I get the error in the title after I make a input shaper command on the Y axis, right now the printer is set it up as a Hybrid corexy VCore style.
When I'll be able too, I'll upload the klippy log if is needed
Thanks in advance for any suggestion
Printer info:
Voron 2.4r2
CB1
Octopus pro controller
4x 2240 TMC driver for the xy axis (since the printer is set up as hybrid-core-xy, like the AWD mod)
EBB SB2209 CAN（RP2040）
alpine valley
Here is some things that helped me when I had timer too close:
https://www.printables.com/model/736220-btt-cb1-customization
https://github.com/moggieuk/Happy-Hare/wiki/Troubleshooting-and-Common-Issues#-timer-too-close
https://canbus.esoterical.online/troubleshooting/timer_too_close.html
fierce fiber
Thanks, I'll trough the day and test it out when I can
fierce fiber
update, I followed the steps on printables but nothing changes.
I did notice that the csv file is being generated, but can't handle the calculation
but if I tell the CB1 to do them separately, it can handle them.
could be the micro SD card not performing enough?
arctic yacht
but if I tell the CB1 to do them separately, it can handle them.
could be the mi...
Thats a known issue with the CB1
Put a heatsink and fan on it
Or upgrade to CM4
fierce fiber
Is it ok if I switch it to cb2?
I was looking at it for a while now
fierce fiber
Put a heatsink and fan on it
I'll give it a try, thanks
arctic yacht
Is it ok if I switch it to cb2?
I was looking at it for a while now
I would go cm4
Better performance
Native raspOS
No weird costum OS
fierce fiber
Ok, firstly I try with a cooling fan, than, if it keeps happening, I'll get the cm4
arctic yacht
I'll give it a try, thanks
Report back how it goes
And make sure to click on your Flag in #rules
fierce fiber
I just react to my flag, I'll let you know how it goes, thanks again