Have had an Ender 3 S1 Pro for several years. Upgraded to Klipper soon after purchase. Finally took the plunge into building a 300 Voron Trident. (Early bday Xmas gift to myself).
Fabreeko LDO kit, PIF.
#The 300 Voron Trident
random sail
Frame complete. Some parts may or may not be on the wrong side/upside-down. 🤔
Motion System getting close to complete.
Stuffed SB.
SB mounted.
Rapido 2 wires don't match up. Temp crimp caps for now. Crimp tools on order.
Wired up. Bed Thermistor in the wrong hole. 😆 Fixed...
Ran into a few issues:
- Missing WAGO mount from PIF parts. Printed in PLA and kept building.
- Bed Thermistor was on wrong Leviathan Input.
- X axis chain too short, added 1 link.
- Z axis chain too short, added 1 link.
Besides that, began configuration and tuning.
First plastic flowed 2024 Nov 24.
icy wagon
Ran into a few issues:
1. Missing WAGO mount from PIF parts. Printed in PLA and ...
Just a heads up. That missing PIF part. You can contact your provider and they should fix that for ya.
random sail
Just a heads up. That missing PIF part. You can contact your provider and they s...
I went through Fabreeko, so not sure specific provider. But noted if required. The PLA should work decent since it is underneath and not subject to as much heat.
sharp crow
Sweet build! 
random sail
Had an issue with z dragging during print. Community pointed out my error with Stepper_Z Rotation Distance setting = 8, should be = 4. Thanks!
abstract cape
Get that cereal!