worldly oracle
Hi there, I'll be documenting my V0 build here.
This is my first build from scratch and dive into the Voron world. So I decided to take it easy on budget/time and go with a Formbot V0.2R1 kit + Wario themed PIF parts.
Nice that there are some other parallel V0 builds here, will definitely lurk around.
Cheers!
fiery lodge
Nice color scheme! What nevermore do you have?
worldly oracle
Nice color scheme! What nevermore do you have?
Thanks, it's the Nevermore v4
Just for the record, there's a TON of useful info especially for the Formbot V0 on this GitHub: https://github.com/SrgntBallistic/Formbot-V0
I am also peeking into the LDO documentation, e.g. the Kirigami stuff: https://docs.ldomotors.com/en/voron/voron02/build-faqv02r1
fiery lodge
Just for the record, there's a TON of useful info especially for the Formbot V0 ...
Oooh, that one is useful. Especially the hints for Kirigami. I put in 40mm screws in my bed as per official manual. I hope I won't run into trouble
Oh god why didn't I find this when I built my hed yesterday: https://www.ldomotion.com/p/guide/Kirigami-Bed-for-Voron-V02
I assumed that LDO must have some useful documentation but I just couldn't find it.
worldly oracle
Work smarter not harder. Learn to delegate, those 120 No-Drop Nuts won't assemble themselves kids ..
https://github.com/VoronDesign/VoronUsers/blob/main/printer_mods/zruncho/V0_No_Drop_Nuts/README.md
Meanwhile I cleaned the linear rails from factory grease and lubed them with EP2. Then I cleaned them AGAIN from the excess lube. Definitely a messy business and I'm happy that's done.
Note to self: My next rails should have a grease port..
Left with grease for like another 500 builds, if someone is in need DM 🇪🇺
median wadi
Work smarter not harder. Learn to delegate, those 120 No-Drop Nuts won't assembl...
Hahahaha nice work
worldly oracle
Somehow, Formbot decided to put random M3 threads in the Kirigami?
The mounting holes for the stealth nut and cable chain seem threaded. Through-hole would be a better option, mounting the stealth nut was a tight fit. The drawing on the Kirigami GitHub does not imply threads..
fiery lodge
Curious. Did not have any problems on my formbot kirigami