Manta 8p V2 | VORONDesign | Page 1

gusty kiln Dec 15, 2023, 2:09 AM

#

Hello Everyone,

I am new here, currently building a Voron 2.4.
I have all the wiring good but I am using the Manta MP8 V2 but I am stuck, So every time i turn on the machine it boots up completely and then Mainsail shows me an error and immediately shuts down.

MCU 'mcu' shutdown: ADC out of range
This generally occurs when a heater temperature exceeds
its configured min_temp or max_temp.
Once the underlying issue is corrected, use the
"FIRMWARE_RESTART" command to reset the firmware, reload the
config, and restart the host software.
Printer is shutdown

I did everything including switching to my octopus v1 and everything worked fine so i am quite sure that all the wiring is good.

my only concern would be the .cfg file due to me not finding a Manta 8P V2 Voron file, so i am currently using the V1 file.

So if u can guide me to maybe get the Manta 8P V2 Voron .cfg file would be amazing so i would be able to hopefully fix it or basically allow me to continue troubleshooting.

Thank Youuuuuuuu

errant coyote Dec 15, 2023, 2:10 AM

#

I'm not at all sure we have a manta v2 file

#

You may just have to go through with a pinmap and see whats different

gusty kiln Dec 15, 2023, 2:20 AM

#

any idea of which pins i should be looking for that would probably have something to do with that error?

errant coyote Dec 15, 2023, 2:28 AM

#

Well, that error would be from one of the thermistor pins changing...

#

Dunno which one off hand

oblique heart Dec 15, 2023, 8:51 AM

#

This is M8P V2 pinout, almost all pins are changed on V2

gusty kiln Dec 15, 2023, 3:16 PM

#

damn so i guess cancel the V2 for now

errant coyote Dec 15, 2023, 5:18 PM

#

gusty kiln damn so i guess cancel the V2 for now

Updating the pins isn't really hard. Just takes spending a little time with that diagram, and scrolling through your config

gusty kiln Dec 15, 2023, 7:44 PM

#

i actually downloaded the v2 generic config file and the v1 voron file and just adjusting all the pins

#

if i make it work is there anyway i could share it here for people to use ?

errant coyote Dec 15, 2023, 7:55 PM

#

gusty kiln i actually downloaded the v2 generic config file and the v1 voron file and just ...

You can submit it to voron users

#

(On github)

gusty kiln Dec 15, 2023, 8:07 PM

#

bet

#

i will be working ton it tonight

half stump Dec 16, 2023, 4:51 AM

#

I have a config file for me, but it has some items non-standard I'll share it if you wish

gusty kiln Dec 16, 2023, 5:02 AM

#

that would be awesome

#

i just started my failing attempt of making a full on cfg file

#

all the pin numbers r hitting each other in my head

half stump Dec 16, 2023, 5:59 AM

#

📎 config-20231216-005825.zip

#

I tried to comment where I put things, I’m using a can bus as well

gusty kiln Dec 16, 2023, 3:12 PM

#

yeah i am using canbus too

#

thank uuuuuu

half stump Dec 16, 2023, 3:44 PM

#

If you have questions, ask and I'll help

#Manta 8p V2