klipper_kalico_help
Preheating twitchy hotend
Config
trying to install klipper onto a btt pi & skr mini 3 v 3 as thats what ive got
Installation
Flashing
Klipper with max31865
Config
Configure moonraker-telegram-bot in a way that I only get 'print finished' and 'error' messages.
Connectivity
pause resume filament runout
Macros
Problems installing numpy
Installation
internal error on command: "SHAPER_CALIBRATE"
Installation
Flashing
problem with delta printer a and b both move to home at same time
Config
ls: cannot access '/dev/serial/by-id': No such file or directory
Connectivity
Solved
Flashing
SKR Pico Loses connection a few seconds into printing no matter the file!
Connectivity
problem with not finding ID
Config
Flashing
MCU not connecting error DFU good but lsusb not working in normal mode
Installation
Error messages
Connectivity
Solved
Flashing
(Solved!) MCU Host service not starting, despite correct IDs.
Installation
Flashing
klipper config error klipper option 'control' in section 'heater_bed' must be specified
Error messages
PT1000 issue
Error messages
Orion Tri-Belted Z
Macros
Meshing & probing
Moved printer, now klipper cannot find MCU
Connectivity
Error messages
Z-Offset seemingly changes on every Z-hop
Solved
Config
Meshing & probing
sb2240 can bus flash problem
Installation
Flashing
2/3 of Trident Z motors are linked together
Config
Meshing & probing
manual stepper
Macros
Config
Network Issues
Connectivity
MCU Protocol error
Installation
Flashing
Klipper help
Installation
Flashing
klipper output system information
Connectivity
Config
moonraker not connecting
Connectivity
Error messages
Klipperscreen
Homing Y Endstop Issues
Meshing & probing
Multicolor Print: which is the right command for pause for manual material change
Macros
Config
Internal error on ercf_home
Installation
Error messages
Unable to parse option 'position_min'
Installation
Error messages
Solved
Numpy is missing no matter how i install it
Installation
Klipper newbie!
Config
mainsail website
Installation
Connectivity
Flashing
Failed to import Numpy even though it's installed
Error messages
Solved
Meshing & probing
move out of range failing after bed mesh and just before start of print
Meshing & probing
KAMP - cfg file read only
Config
ADXL345 ACCELEROMETER_QUERY reported values keep changing with each query
Solved
Config
502 Bad Gatewaynginx/1.14.2
Error messages
Solved
fysetc catalyst flashing help needed
Flashing
Issues with klipper after update
Error messages
USB device not visible after flashing (FYSETC Spider)
Installation
Solved
Flashing
I want to use variables for quad_gantry_level points. Is it possible?
Macros
Config
Meshing & probing
How to home and resume with safe_z_home in the center
Solved
Meshing & probing
camera_streamer mainsail gets 502 bad gateway but direct url works in browser
Camera
Mixing Input Shaper Types
Solved
Config
Slow Homing on only one axis
Meshing & probing
Unable to read tmc uart 'stepper_y' register IFCNT after printhead crash
Error messages
Unable to write tmc spi `stepper_x` register GLOBALSCALER error in klipper
Error messages
Klipper hangs after reading printer config
Connectivity
Config
Flashing
Moonraker suddenly not working after installing Can Toolhead
Connectivity