klipper_kalico_help
first time using klipper, got some errors?? (mainsail btw idk what that changes)
Error messages
Can't STEPPER_BUZZ STEPPER=stepper_x - Unable to write tmc spi 'stepper_x' register GLOBALSCALER
Error messages
Config
Solved
beacon probe virtual endstop error message
Solved
Meshing & probing
klipper.bin not created
Flashing
klipper configuration
Flashing
Understanding [z_tilt] z_positions for Trident
Solved
Config
mcu 'display': Unable to connect
Installation
Flashing
Error message after updating Klipper
Clicked update bttn
"closed" 401 mhz error on h723 octopus 1.1
Error messages
2 pins same name
Solved
Config
thermistor wrong value
Installation
PRINT_START paired with user input macros
Macros
Can't Install Klipperscreen
Installation
Error messages
Klipperscreen
Klicky, probe_calibrate issue
Macros
TMC 'extruder' reports error: GSTAT: 00000004 uv_cp=1(Undervoltage!)
Error messages
Config
After klipper update there is a weird error
Error messages
X & Y Moves are too long
Config
Adaptive mesh bed not working
Error messages
Solved
Meshing & probing
Pi visble in router admin page but not connected to network
Connectivity
Klipper won't parse my Kirigami Bed Neopixel on my V0.2
Error messages
Moved house, how to change wifi?
Connectivity
max_deviation error
Error messages
moonraker fails to connect 127.0.0.1 port 7125 error no 111? klipper screen, can bus v2.4 350.
Connectivity
Error messages
Klipperscreen
Config
Kiauh Klipper Screen
Installation
Timer too close error on M8P
Error messages
Klippain MCU Ender 3 V2
Config
wired connection to PC-solved..for now
Connectivity
Klipper with Klippian becomes unresponsive after reboot
Installation
menuconfig not showing options for STM32
Flashing
z_tilt z_positions needs exactly 4 items for bed slinging hybrid_corexz
Meshing & probing
WS2812B Neopixel fail to control full chain
Macros
Config
Moonraker failing to connect to Klipper.
Connectivity
Error after updating klipper and after trying to update mcus nothing helps
Installation
Solved
Clicked update bttn
Flashing
Home All sends motors in different direction than Home X and Y independently.
Installation
[solved] attempting to flash voron display, but limited config options shown
Flashing
BedFans.cfg from Ellis breaking my Additional Heater
Macros
Klipperscreen splash screen not working
Klipperscreen
RBP&BTT Pico
Installation
Connectivity
Flashing
Basic question regarding QGL
Meshing & probing
Formbot Voron 2.4r2 Config (M8P V1.1, CB1, EBB RP2040 & TAP)
Error messages
Config
Error Z offset : SAVE_CONFIG section 'stepper_z' option 'position_endstop' conflicts with included v
Error messages
Config
IFCNT Error
Connectivity
mks robin nano v1.2 unable to connect to mcu
Flashing
crowsnest - C920 - Autofocus setting crashes the camera
Camera
!! Lost communication with MCU 'EBB'
Connectivity
klipper screen help
Connectivity
Klipperscreen
Extrude below minimum temp error
Error messages
Extruder not hot enough/bedfans not a valid pin errors!
Solved
Macros
Error messages
Config
Klipper Screen wont load the network interface
Connectivity
Klipperscreen
Voron STM32_Mini12864 adapter gives error
Installation
Solved