#technology
1 messages · Page 29 of 1
It doesn't need to be.
By trying to appeal to everyone, you end up appealing to no-one.
Statistics say otherwise.
Whatever floats your boat though.
"Rewritten for modern audiences" comes to mind as a media example.
Samsung S24 should work with USB-C displays right?
Just discovered my Pixel does not
https://amzn.eu/d/j06zbGn
Got this
Works with an iPhone, but not my Pixel. With my Pixel, it just flickers
I googled and people said that the Pixel 7 Pro doesn't have the right USB C shit
Wanted to find a clear answer online for a Galaxy S24 but none
Do you've the screen powered externally?
not directly from the phone i hope
that's how it feeds yes
it uses the host as the power source
which is why it needs properly implemented USB-C PD and DP alternate mode
yes but since it doesnt support it properly, it needs a external powersource.
ah, the phone, yes a lot of phones don't have that nailed down well
samsung at least does since they use the same tech for DeX
my ZTE phone doesnt support it well either. idk about the nubia
but you see flicker?
the flicker normally means it doesnt have enough power or a bad signal
or bad cable
thats a option too
Worked flawlessly with a USB-C iPhone
Up until 40% brightness which was probably a power issue. Then worked when I put in a second cable for power
But when I connect it to my Pixel, it brings up the splash screen for a split second, sits black, and then tries again
This portable display supports both 1xUSB-C (say a laptop which supports it) but then for low power devices or devices that can only do display, you have the option of plugging in a second -C cable, or using a HDMI to mini HDMI + a power USB-C
I googled pixel 7a and it seems to not have video out.
pixel 8 and further support it
Yeah that sucks
Though thankfully the display isn't for me
I am 80% sure the S24 does have proper video out so should work fine for the person I'm gifting it ro
I only did a quick test but I am hella impressed with the monitor TBH
thats nice, you can make one yourself too if you know what you're doing 
May be silly, but I'm fairly anti-DIY in the sense that I just really dislike doing such myself if it requires cutting, wiring, sticking, ect ect
Utterly unrelated. What's some good software to clone a disk including the shit it needs to be bootable, but then also have the clone fill up the rest of the volume to the larger drive it's going to?
Does Macrium Reflect have a free version that can do this still?
for windows? idk
To be honest, there is already a super widely used linux distro. It's in a tons of schools, etc. Most people just don't think of it as linux, but chromeOS is a full linux underneath, and will give you just about anything including command lines once you fire up a terminal.
Not to mention androids are all basically linux machines. Different UI on top, of course.
that is such a turbo cope
that's like saying that a bicycle and a hypercar are the same thing
both android and chromeOS are built on top of the Linux kernel but they're so far from what a traditional Linux distro is that they're considered their own thing at this point
Idk, chrome is pretty darned close. Little more locked down unless you go toggle some switches and enable crouton.
But regular dev mode, there's a full debian machine there and you can install flatpak and get just about any linux app.
you know what that sounds like? something 95% of users won't do or not be bothered to do
that's like saying that the crappy infotainment unit in my car is a linux
well it's likely auto grade linux or QNX
that is as much linux as a sheet of aluminum foil is a airplane
How about a 'set it and forget it' raspi running raspian? Is that a linux or no?
or a pihole?
yeah your average Joe ain't buying a raspberry pi let alone install pihole
Chrome runs linux, is a desktop type interface, and you can get to any of the linux tools you need for general computing.
Linux-based does not mean it's Linux.
By this logic, the McLaren F1 is not a McLaren, but a BMW because it uses a BMW engine. 🤣
exactly
Lol so is the Subaru solterra a Toyota? 😛
diskpart and xcopy? 
well it better be with a /clone command

what are you even trying to clone
hmm would recommend not running on the same drive you're cloning then.
dont know if xcopy will work when u use the bootable usb but should work
As in don't copy a drive that's active, and boot with different media to then do the copy?
ye
They're all CMD stuff right?
its a bit less dumb and says what it has copied
ye
robocopy is a bit newer
still ancient though
Appreciate it
Been a while since I've cloned any disks, and I always used Macrium Reflect
@glossy patrol
only thing it can't clone is the efi and recovery partition, since it doesnt have any drive letters by default. You need to assign drive letters to them to copy those.
But i'd recommend using some other program for that since i never tried that myself. the efi partition isnt that difficult but the recoverypartition you might have to relink...
I remember I used the easeus software for it, the trial version at least to move those.
Hm...
Any better place to download Win 11 ISOs from other than Microsoft themselves? I have never once been able to get past their "validating request" shit
Nevermind, me stupid
just reinstall from scratch on new pc
it's a lot better than copying
Rufus will download them for you from Microsoft’s servers
yo anyone know a good way of optimising my stls in cura to minimise print speed
like placement on the print surface that kinda thing
speed? why would you slow down?
those are controlled by the slicer settings
i mean like arranging the STLS to shorten the print time
or other things
I have an ender 3 forgot to mention
to reduce overall I'd suggest putting multiple object in the same print job
if they all fit on the bed ofc
yea thats the plan, i just meant like should I put these in better positions to help reduce the print time
just like make it more efficient or whatever
use the auto-arrange, it'll optimize their placement
but yeah lowering time beyond that means increasing speeds and accels
alright
alright ill check it out
Accidentally installed Windows Pro N and fucked myself over for two hours
get glasses 
Any thicker glasses and I'd need a helmet
get lasik
what's the other if it's not a secret
Forgot it's name, but it's where your pupil isn't round
pupil or the lens?
The eyeball itself sorry
Just tryna find my prescription which has some of the details

And amblyopia
Hmmm...
my family has sight issues similar to that they they we're somewhat corrected
doe in my grandma's case she went too late
so only 40%
change the travel speed too?
its going to be a part of a costume so id rather not change the speed at the cost of quality
yeah then just arrange them closer together manually to minimize movement, I guess
I find auto arrange has wider spacing than manual. Also you could always go for a lower infil, thinner walls, etc
yeah thats what I was originally referring to anyway lol
yea cura for me when i did the auto arrange it actually bumped the print time up by like 10 minutes lol
if you're doing purely cosmetic stuff that doesn't need strength, lightning is .. interesting.
its for a gauntlet so I would prefer it to be atleast a little durable lol
you know one of those long articulated finger gloves you can buy for a halloween costume, imagine that but bigger fingers
won't help much
travel accounts at best 15% of the time
usually under 10%
the biggest time sink is the inner and outer walls
a.k.a the stuff you'll see
most of the strength is in the walls anyway
ye
also the layer adhesion and material of choice
for example this is PCCF which is basically plastic steel if printed slow and hot for layers to bond well together
actually it's closer to aluminum but you get the point
for example PLA is fairly brittle and will shatter when pushed beyond breaking point
https://youtu.be/DAANNGvMANM?si=RvXGaGRuEsNFFLhL
Response to NZXT's response of them
SUPPORT INDEPENDENT REPORTING: Use code "PUCKGAMERSNEXUS" for 10% off while it lasts, AND we will donate $5 PER ORDER to Archive.org through this weekend. Visit our store: https://store.gamersnexus.net/ - our fight against anti-consumer behavior is directly supported by audience support. We need your continued support to make these time-intensiv...
He's really going down the Kyle of HardOCP route huh
just put companies in the industry on blast until they stop talking to him
and man I fucking LOVE MongoDB I found out how to upgrade the MongoDB version on my Omada controller and it's going to take me an entire day at least
You say it like he's going over the top or doing something wrong
a 7.5 watt monitor.
Moar Powaa
Those Samsung ssds can survive without a heatsink?
Hmm gen4s still can get pretty hot though or you must not be using them intensively
a single case fan is enough.
^
Hey is anyone in her good with web development programming and front-end/back-end. I am better at front-end and need some help fixing code for a Render deployment so it can communicate with my back-end in React JS project.
I should add right now I can only get back end working locally and not on deployment
what backend framework, what errors, how is it deployed, does it have other external dependencies?
Deployed on Render, I am using localhost on two client pages that communicate with the back-end. Database uses MongoDB. I think possibly the "localhost:3001" in my client side code might be the problem, but not good enough with back-end to resolve it. Basically the front-end cannot fetch data from the back-end outside of testing it locally on my computer. Give me just a moment. I can either DM you, post code in here, or do a vc. Whichever you prefer.
well it's deployed on render but what is the backend framework
and for the front-end, are you adding the deployed URL of the backend to it?
I think Restful API using Node and Express JS but database is MongoDB
well once you deploy that you need to provide it the URL it generated to your front-end so it know how to access it
then you can deploy the front-end wherever you want
yeah not sure the best way to go about that. Should I post the code here, DM you, or do a vc to show you the current situation?
I mean your front-end uses local host right now, instead of that you give it the base URL from render, the deployment should show it to you
ok what in .env? If so though I also need to change it in the client code then I think. I also sent you a fr if you want to chat about it elsewhere. Again I am only just starting to learn it and still not good with back-end yet.
it's fine we can talk it here since it would be good to learn for others as well
true. Well do you mind if I post the current client and server files that are in question (minus the .env of course)?
sure
These are the two React pages that need to communicate with the database on the back-end.
The following are I think the necessary server files in question possibly. index.ts is in server/src/routes/api/index.ts and server.ts is in server/src/server.ts
well see you're using a complete URL in all of those, instead of that you need to for example use process.env or another storage method to keep the base URL
and in these functions you'd only call base URL + path to the resource you need
for local it would be localhost
for deployment it would be the Render URL
so what would be an example of how I would have to change or add to the .env in both local file, pages .tsx files that I could then change the environment variables on Render to?
because I still am not sure I fully understand
also is this import statement even needed in server.ts?
import router from "./routes/api/index";
currently it is being defined but not read
I still do not know what I am doing or what to change though.
I have tried what I thought you suggested but it still is not working


make sure no error when running the node js code
try using postman (install it if you haven't) first to test , do api call to your api first ,
if all okay move on check your front end code, or maybe it is blocked by cors (can search google or chat gpt how to fix it)
make sure all the localhost:number/path is setup correctly
I eventually kinda got ChatGPT to fix it however, I’ve never used postman before so I don’t know anything about it
Anybody here very knowledgeable on premium wireless headsets?
Don't worry, ended up spenidng £300 on a pair because I have no self control
lol nice, whatcha get?
It was really tough between these two:
https://steelseries.com/gaming-headsets/arctis-nova-pro-wireless-pc-playstation?color=black
https://www.audeze.co.uk/products/maxwell-wireless-gaming-headset
Both are stupidly expensive, but my requirements were a really good mic, and bluetooth + cable for connectivity methods
I ended up going for the Maxwells, despite being more expensive and less feature rich
Did I need to spend that much? Absolutely not, but I just said fuck it
Heh I made a simliar choice a couple years ago with the B&W PXs. not 'gaming' persay though
Made the sane decision to just seperate the headphones and mics instead of getting headsets 
Then you have best of both worlds
I like over the ear for isolation, but my headphones are music oriented. mic does work of course, just not as well as a boom mic.
I run DT 770s with a XLR cardio mic
I got busy so couldn't explain it properly, did you resolve it?
but it always has been free you don't have to explicity add the "free" to it 
I get this feeling that there is also a paid update out there now because of them saying that
sort of yes for now but now have new questions
go ahead
knowing Broadcom I wouldn't be surprised if they stop being free 
pretty sure that's the goal since it was already a pain in the ass to download the new "broadcom" version to begin with.
Broadcom is such a pain in the ass to deal with that Ingram Micro is terminating their business relationship with them since it's unprofitable
which is uhhh 
Changing my NIC from a ConnectX-3 to a SolarFlare 5122 that I had laying around cut my boot time by more than 30 seconds because for some reason it can get an IP address way faster 
Computers were a mistake
Say, this will probably sound stupid but, can you put a SATA SSD into a SATA HDD slot?
Or does it depend on a specific device/model
obv you can
what would stop you from doing that?
Idk much about laptops kek
But they're generally the same size?
Idk I just read the thingy attached with it, says pretty clearly HDD kit
they're exactly the same size
all components in pcs are standardized
And it'll be faster than a flash drive on a 3.0 slot yes? please
MUCH faster
and more reliable
flash drives usually have bottom of the barrel type NAND in them
Should I get a Phantom Spirit 120 EVO?
seems aite, dunno about performance doe
from what i see, it performs great, when you let it ramp up the rpms, then it gets a lil loud lol
Check gamer Nexus on cooler reviews thought there was a deep cool version that was super performant and with a competitive pricepoint
Use code 'PUCKGAMERSNEXUS' for 10% off the store for another few days. Expires soon. https://store.gamersnexus.net/
This Best Of round-up recaps the best coolers we've tested in the past year or so. There are seemingly endless coolers, and we know we haven't gotten to all of them this (or any) year, so we're basing this off of what we've tested ...
Also didn't you have a 3400 as CPU or something? Cooling for that is overkill to begin with
Ehhh wanna get 5700x3d later this is just temp for now
Doesn't that come with a stock amd cooler? That should suffice , might be a bit louder though
why not go AM5 with 9800x3d
New board
New ram
Time and effort
For a new CPU lol
Also, money
its updated
it's inevitable
i did that a while ago to try and stop this pc from crashing. I STILL DONT KNOW WHATS DOING IT LOL
I think its my version of windows 10
maybe your windows installation/ unstable ram? :)
that isnt... legal
try run sfc /scannow in cmd
wdym isn't legal
i did
nothing comes up
yaaaaaaaaaaaay
i rather just buy a new ssd and dump win 11 on there as a fresh start lol
OEM key from the gray market is ez activation
he likes to live on the edge
true
10 bucks for a key
honestly would just grab a usb put windows on it and install it from there
i have to do some funny bios stuff first
cause my current windows is like
it only runs when its set to legacy mode
eh?
which disables.... idk if it disables tpm or secure boot
did you enable the tpm module?
ya when you enable 1, it disables the other
so i can have the settings for win 11 but windows wont boot
youve a msi mobo by any chance?
hmm
I know windows 11 was broken af too when it wasnt on the latest bios for my yougner brother
just reset to optimized defaults if youve the latest version of the bios
nah it fucks with legacy boot
lol i stopped questioning it
it only turns off when im doing demanding shit on it
even then its whatever
true it sets it to the boot option it shouldve been set in the first place 
sounds like a overheating issue.
but youve a 3400 so.. would be pretty weird
did you do a memtest yet?
for the memory?
wat
listen i know its the wrong ram when you look deeper into it
but it works fine lol
its corsair vengence lpx or whatever
but after reading it
its got timing for intel cpus
and im like "fuck it it works fine"
memtest is more like to see if you pc is stable by going through all the memorybits, if only 1 bit is fucked you can already get a crash or data corruption. that bit might not be accessed frequently but the time it does 
would try occt for cpu and memorytest it can check for errors. or boot memtest via a usb
how do i use occt
you download it , open it and then select the test you want to run. i'd recommend memory test first.
Ocbase is the home of OCCT, the most popular all-in-one stability / stress testing / benchmarking / monitoring tool available for PC
zzzzzzzz ads
youve to run it for quite some time. for me when i had defective ram it only came up after like an hour
ads?

your fan is ramping up right? 
...no
yea
just stop the test when you're at 90

gimme dat 100% speed
81c for a 3400 is crazy though
36
meh still same
gigabyte bloatware
ehh i think its fine.
you've the stockcooler right?
my brother has the same but it never gets close to 80
and he has a 3800
x
which ahs a higher tdp
whats the memory temp at
rn
wat
the temperature of your memory sticks.
if you get above a certain temperature it can cause errors
ok you might not be able to go back right
sec
mine are shown on top though
the fact that yours is missing is already weird
10/10
aight fuck it
thats enough messing with it
i live through my mistakes
lol
youve to run for an hour or multiple hours if you really want to know if it reaches it without errors. But I assume your cpu is just overheating due to old thermalpaste or bad coolermounting
since 82c is kinda crazy at 50w, and it's not that its doing difficult instructions or anything 
bcz it was installed in traditional CSM bootloader, not UEFI, so it need a clean reinstall on UEFI
yea
i mean there is a MBR to GPT tool
Warning: This is a non-destructive process, but it's still recommended to make a full backup of your PC before proceeding in case something goes wrong and you need to recover your setup.
The best approach is switching to UEFI and performing a clean install of Windows 11. However, if you already have a Windows 10 installation that you want to upgrade, you can convert the drive to change the system firmware settings properly. Otherwise, the device will no longer start correctly.
don't
those work iffy at best
you need to migrate to GPT then reinstall via UEFI to create a UEFI bootloader
yea thats why i rather just buy the new ssd and install a fresh copy... and then "activate" it
meanwhile me with SSDs
(there's another one under the heatsink)
yea mine can only do 2
at least it comes with 2 heat spreaders
too bad my 2nd one is gen 3 
it was a bitch to get a mATX board with 3
ITX with 3 is non existent
dont they start using the back of the board at that point?
yeah
but so far I've only seen Intel boards that have 3
my atx has "7" and with 7 i mean 3 on the board and they added a fucking pcie express card with it with 4 extra slots. 
I can add a PCIe expansion card with M.2s as well
true, but saying a mobo has 7 by just adding a pcie expansioncard is laughable 
yeah
I need to figure out what SSD/SATA/PCI slots get disabled when you put too many drives in one day lol
for SATA only the 2nd one gets disabled
2nd M.2 that is
same goes for populating that M.2
okay so slots disable stuff
So... SSD 2 will disable that PCIE slot.
And if I have hard drives
5 and 6
the third one is disabled
lol
Yea this isn't an X board
It's a B board
It's why the top one is PCIe Gen 4 and the one below is Gen 3
Do you think I can daisy chain 5 RGB fans together into 1?
Like 3 in series, 2 in series, and then use a splitter on both into 1
Only asking cause 9 and 10 are RGB/ARGB.
I do not wanna make that run to the bottom left corner of the board because in my mind, there is no way there is a cable long enough to reach that
No wait.. 7 is the same as 10.... I might be able to be stupid here lol
It's ARGB. Fuck. 
ok so
how many pcie lanes does that cpu support
and how many are you using?

oh it only supports 16
assuming you're already using 8 at least for the gpu
and you've 2 other ssds already in there?
then the 3rd one will indeed not work
I mean you could, but at that point just use a controller
listen i didnt have the foresight to buy one.
i have 2 HDD, a m.2, and a SATA SSD (OS)
tbh 2 front intake and one out should suffice to begin with. replacing the coolerpaste would save time 
instead of blasting fans at the problem 
2... haha...
It's 3.
also i need more cause i can feel the warm air coming out the top. i need some top exhaust
But yea. MORE FANS WILL SOLVE MY ISSUES
my ASRock motherboard is far more sane and disables SATA ports when you populate the 2nd M2 slot, instead of PCIe slots
since nobody uses SATA ports anymore anyway
I mean most do it. You can hit a limit before other ports get disabled
I like how the new RX cards just... haha funny Nvidia naming.
Way to confuse the future
AMD, nvidia, Intel, it's a legal requirement that all hardware companies be terrible at naming their products.
look at Microsoft and the Xbox
yea but if you name it
9070
Nvidia is 4 generations behind. smh.
Also Sony products have horrendous names lol
LIKE THE ABSOLUTE WORST NAMES
@odd juniper ALRIGHT. ITS TIME FOR A FAN CURVE. LOL
how about less fans
Also doubt it'll help since you didn't change the paste
Bro. I HAVE NO IDEA WHATS MAKING THAT NOISE LOL

All the fans combined
👍
Rime
My PC runs at 30-40 c without ever having to make a shitton of noise

You can do the same
I mean is it winter for you?
yea
Free heater
Bruh
im literally sitting next to a water heater
You mean a radiator?
ya
Ah yeah idk maybe don't put your PC next to it
where is it gonna get cold air from
forced air
you know whats funny
i just watched my cpu temp climb to 55c
from just putting the top filter on
lol
i take it off
oh look 50
I mean filter do reduce airflow yeah

I would've taken it apart already if I was nearby 
i like how 3 of these are like
1550 rpm
the 1 fan at the back
1300
ok actually im curious which one is making that noise
Make one line where you've it idle at the same rpm
So it doesn't keep ramping up and down
ok you see how theres like
That gets annoying real quick
3 fans?
Uhuh
Ok just remove one from the chain first turn off your PC though

nah i cable managed
its just
the channel is so full of wires
that its the hardest part to close
Yeah some case manafactures don't take that into account
My be quiet case has a anti noise foam inside the panel
Which makes it harder to put cables in
alright ima crank it and see which one makes that ufo sound
Because ofnit
Inb4 it's your gpu fan

i hate how like
i can feel the airflow on my legs
its actually funny
alright i'll put it on silet
silent
so it doesnt like
make me go crazy
some new year's resolutions:
320x240
640x480
704x576
800x600
1024x768
1366x768
1600x900
1920x1080
2560x1440
3840x2160
not yet
What the fuck is a T612 chip
a SoC
I found this phone run Azur lane quite okay
(Who am I kidding, anything can run AL)
But Arknights have some weird frame missing
Screen run 60hz
But it look less smooth than my old phone
Funnily enough, really not true
A lot of older phones heavily struggle
Azur Lane is pretty intensive
Windows market share:
Windows 10: 62.73% (+0.9 points)
Windows 11: 34.1% (-0.84 points)

......efficient i guess?
a low end CPU from 2022
The Unisoc T7225 (formerly Unisoc T612) is an entry level octa core SoC with two fast ARM Cortex A75 cores at up to 1.8 GHz and six power efficient ARM Cortex A55 cores at up to 1.8 GHz.
for a USB thumb drive it's alright
for an allegedly USB 3 flash drive that's really bad write speeds
Should be getting more like 50ish for writes
it also depends on the file size and NAND, which most likely is some bargain bin stuff
what are some phones that AL run good on
iPhone
Pixel 7 isn't too bad. Or 9 for new I guess.
presumably any flagship Android phone
I mean it runs ehhh on the backup iPhone SE(2) so the specs aren't that high .. (unlike the storage requirements lol)
I've that one 64gh version, the writes are slow but the reads are fine. At least it doesn't randomly die like other thumb drives I had in the past.
I have a samsung A15, the game runs decent but I cant use the private quaters 
Ye thankfully playing zzz on it feels just as smooth as having it on ssd
If it's better than a Mate 20 Lite, it'll run
Had a Mate 20 Lite and that is definitely the bare minimum you can expect to play AL on
And ideally don't buy your phone based on it running Azur Lane lol
Any decent modern phone will run it
2000 dollars for a 5090, not let's see how much that'll be in my country. im gonna assume thats 2500 euros 
yes, I had the specs of Blackwell for a while now
600 watts btw 
Does it use the stupid connector that melts still? lol
yes
575
Fuck. Did they at least fix it?
no 
Anyone know how to program bluetooth earphone?
I have a pair
But suddenly one day it split into 2 bluetooth address
How do I pair them back now
you can't
proprietary firmware
You can probably put it into pairing mode if you read the manual
They usually can pair together again
or just do a factory reset
shouldnt be a problem as long as you have it firmly pushed in. (assuming heat doesnt pull it back).
Hot take
1K for an 80-class card isn't that bad
But of course OEM models will be even more, and it should still have more VRAM
I think the 5090 is a bit silly at 2K though
considering it's the equivalent of a Titan, it's not
the 90 is not meant for gamers
despite nvidia claims
Lmfao. Sony thinks it can enter the car market with a Honda collab.
Not if you're gonna price your car $89,900
"Includes 3-year complimentary subscription
- AFEELA Intellegent Drive
- Immersive Entertainment Selection
- Customizable Theme
- AFEELA Personal Agent"
OH YOU'RE GONNA PAYWALL THE CAR TOO LOL
we gaming
More ram.
Overkill
Yes and? 
I got the payout for that ages ago wtf
Mmm nuts
Trying to clear cache for this game and feelnwondering of iOS stuff but guessing offload Isn't enough?
I think Offload is just deleting the installer or something
Anybody knowledgeable on KVM switches?
DW, ordered one already. Will see how it is
Lol. Socks and sandals on national TV.
Linus Sebastian talks about creating tech videos for almost 20 years and attending the biggest electronic show in the world, CES, before showing Jimmy and Bad Bunny some cutting-edge technological inventions.
The Tonight Show Starring Jimmy Fallon. Stream now on Peacock: https://bit.ly/3gZJaNy
Subscribe NOW to The Tonight Show Starring Jimmy F...
Ew, LTT
Sponsor: Hyte Y70 Case on Amazon https://geni.us/p2lWP (or blue Y70 on Amazon https://geni.us/586E5q)
The NVIDIA GeForce RTX 5090 will arrive soon. NVIDIA Thermal Engineer Malcolm Gutenburg joined us to show a number of RTX 5090 Founders Edition finished and prototype samples, including liquid metal, 3D vapor chambers with claimed world-first de...
NVIDIA Thermal engineer walks through the 5090 founder's cooler design
seen it, finally novideo realized that using liquid metal is good civ
The little concave bits on the fin stack look so damn sexy
I also love Steve asking the equivalent of "Does this ACTUALLY do anything or do you just run fluid sims all day?"
Oh
I mean sometimes starship flaps do melt during re-entry
https://www.spacex.com/launches/mission/?missionId=starship-flight-7 20 minutes 'til stream
stream is live, T-30
🫡 1st block 2 ship
Just saw the most insane #spacedebris #meteorshower right now in Turks and Caicos @elonmusk what is it??
Starship Flight 7 breaking up and re-entering over Turks and Caicos
Starship from the Icon of the Seas (Caribbean Sea) @SpaceX @elonmusk
I have horrible Columbia flashbacks
but it does look spectacular in the sky
I AM STILL TRAUMATIZED
There's some real beef between GN and Limus right now, and for once I think Linus has the moral high ground on this
First 20 mins of the last WAN show
Wait till Steve Nexus makes a 1 hour long video because he's still mad af
Wait till rime gets involved
Sponsor: Thermal Grizzly Aeronaut on Amazon https://geni.us/e8Oq & Hydronaut (Amazon) https://geni.us/hOQrBAb
The NVIDIA GeForce RTX 5090 GPUs launch next week, but reviews can go up today. This benchmark and review of the RTX 5090 Founders Edition video card evaluates the gaming performance vs. the RTX 4090, RX 7900 XTX, RTX 3090 Ti & 3090, RTX...
the embargo lifted for those that were waiting on this
Nice , now only if there was stock to buy from. Still don't trust the liquid metal even with triple rubber design 
I liquid metal all my GPUs and CPUs
eve my legendary 1080 Ti
I'd rather have some lower risk. And slightly less performance even if the risk is miniscule

what risk
Shortcircuiting
it's surface tension, it won't spill unless you overfill it
My setup will be vertical
Didn't the PS5 have issues before with lm
Oh only when people opened them apparently 
exactly
if ur pepega enough to open it and not know how to put it back together then gg
So most people

you don't need to take them apart
LM is not like thermal paste that goes bad over time
Yeah ik. But people like taking dumb advice on the internet
Also using a 1000w hydro Ti assuming thats enough for the 5090. If I undervolt it a little 
Yeah I'll have to wait for "possible" stock
it's enough to run full bore
Won't it have any spikes? I'm too dumb at the area
Like the 3000 series had
keep in mind that nvidia cards will boost until power or thermal limits are hit
no
the 50 series has a new power management controller
that is a lot more responsive than even 40 series
Ah kk cool then no worries.
Had a hx1000 too which I returned like 3 times till the point I put back in. My old rm750
Because of the coil whine and rail switch noises
That's the sweet spot.
The newer models are prob better. I had a hx1000i as replacement but had that annoying. Railswitch sound
I wanted some overhead for USB PD and all the SSDs
Hope your 2024 doenst have that
no it doesn't
Coolcool
Ahh
I've a couple of ssds too
But I think if the 9950x3d will be decent I'll get that
Tdp will be low enough to use around 800w total I assume
also once I add a 100gig NIC that'll consume a lot too
it's not
just as bad as 7950x3d
100gig? What u gonna use that for? Internal network to another PC?
internal network
I run mellanox cards in my server room
They did go single ccd now right?
no
double CCD, cache only on one
so it's the same annoying shit with parking cores and disabling SMT for gaming
Damn
Yeah fuck that
I don't want special software and shit to get some better performance
Has to be there from the get go
so might as well go 9800x3d
but good luck with stock unless you either have insider ppl or camp the retailers
I've a 12700k aside from gaming performance it'll be a downgrade
Which why I was hoping the 9950x3d wouldn't suck
Insiders like you

I went from 8700K to 9800x3d
Yeah ok that's a big leap lol
Only issue I've rn with my PC is that explorer just has a continues stroke.
Damn I've like 3tb and I barely fill that
the 8700K was probably the last good Intel CPU
Tbh 12th gen wasn't bad. But the 1*900 series were powerhungry jokes.
Tbf anything 13th and 14th gen was just adding more power
idk, they were fairly desperate with the CPU ever since Ryzen took wind out of their sails on both consumer and enterprise markets
True. But the concept was nice. But in classic Intel fashion they got stuck without improving the architecture of the cpu
I mean AMD is starting to fall into that trap as well
Still stuck on 16 cores..
Yeah let's hope both of them get their shit together
nvidia on the other hand are so far ahead that they literally don't care and keep charging ahead without care
If only there was some competition . Intel is "getting there" but years behind and AMD just gave up
unfortunately
not like they have to
nvidia long gave up on budget
so that's where they can compete
and Intel is competing with the battle mage cards
True and amd gave up on high end too. I do like Intel giving a lot of VRAM to the new battlemage cards though
In comparison to nvidia
nvidia won't give the lower tier cards more RAM because then it would eat into the higher end ones
due to AI
Yeah
I'm starting to feel the limit of my 10gb
doesnt the 60s always have some ridiculous high gb model which gets reduced half way through its lifespan?
My 1060 and 3060 are the higher gb models
there is no 60
at least not so far
and there's a high chance there won't be
Ti versions come with higher gb too.
lol got two $50 off coupons
what was the difference between the s24 and s25 again? 
Snapdragon Elite processor, the design changed a lil and now has that stupid side bar that goes around the entire phone now

i think its the wide angle camera got a slight upgrade
they dont use their own cpus anymore?
ok but do you make a lot of photos

ya
never said good photos
just random shit at work that needs to be reported/im too lazy to write this shit down
"Oh look at that random animal."
"Oh look at that dead bird that flew into the window."

who put a window there
smh
why did you do it then 
And I saw it
oh
heh
Blader in één oogopslag door de beste Samsung-deals. Shop nu een breed scala aan TV's, huishoudelijke apparaten, mobiele apparaten en meer tegen onverslaanbare prijzen, exclusief op Samsung.com.
i see no offers
also wth is a galaxy ring
I got 3 codes
1 from signing up before the launch to get a $100 code
1 from Samsung Members
1 for not buying the phone but it's sitting in my cart lol
also yea theres a ring.
it's $400 more than what I'd pay
seems like it's overpriced to begin with anyways. same specs I think? https://eu.nubia.com/products/nubia-z70-ultra
1.5K Full Screen Display for an effortless, seamless look Snapdragon® 8 Elite for unlimited power and efficiency 35mm with Adjustable Physical Aperture for real-life shots 6150 mAh Battery so you're always ready to go Take on the elements with an IP68 & IP69 rating for water and dust
meh pass
im waiting for 26 if it has good features, if not, 27
is that not just a accessory?
it goes into the phone and does shit
I can take photos with it and quick access menus
way more accurate and efficient for me to just pop out the pen lol
I mean yeah, it's more precise and shit. 
tries to write shit
fat thumb
yeah..
takes picture
draws on it
MAN WTF IS THIS FAT CIRCLE
this was 12 hours ago 
everything was sold out in like 5 minutes
except the 5080's which go for 2k instead of 1k.
clownfest
yeah, why do you think I pulled a favor to get a 5090 reserved
How against are people to side mount, tubes up for AiO's?
A lot of PC builds online (including manufacturer photos & NR200P builds) incorrectly mount AIO liquid coolers, leading to pump noise/whine and early cooler failure.
Sponsor: Buy Thermal Grizzly Conductonaut on Amazon (https://geni.us/1D8Eeq) or Hydronaut paste (https://geni.us/Fsray)
FOLLOW-UP answering common questions from the comments in th...
Besides just that
I can't fit my 420mm with tubes bottom, so do I
Return and buy a 360mm
Or
Leave as is
I'm thinking of just leaving it, honestly
did you case support it in the first place?
I will never claim it was a reasonable purchase, but man it's always been my dream and it also meant I could not buy any additional case fans 🙏
lol
well if you just want it for looks go for the 360mm then that actually supports it
what cpu is it even
I've had enough of watercooling
needs more rgb 
I went from none to all
Since I upgraded my motherboard I can also now actually control it. Went from zero RGB headers to three
you go back to none eventually
RGB just like watercooling is a phase
I'd rather have the option for RGB than not. If I ever don't like it, I can turn it off
The RGB tax can be very minimal on some things
Id rather not cause there's a stupid small markup
Just like what I like to call the ASUS tax, ROG tax, STRIX tax.
50 series tax

Is that what they're calling the scalper tax? lol
Support us on Patreon: https://www.patreon.com/hardwareunboxed
YT Membership: https://www.youtube.com/channel/UCI8iQa1hv7oV_Z8D35vVuSg/join
Buy relevant products from Amazon, Newegg and others below:
GeForce RTX 5080 - https://geni.us/dRy7y07
GeForce RTX 5090 - https://geni.us/JyDFBvM
GeForce RTX 4070 Super - https://geni.us/wSqSO07
GeForce RTX...
no, there was barely 2000 5090s worldwide
so obv sold out within seconds to minutes
Anybody have experience with ADB backup?
Aight I think I fixed my windows lol
GeForce experience was being stupid and fucking kept opening new instances which is what slowed down and crashed the comp
Got the same trouble, I just override the nvlddmkm.sys and now it's solid. Especially when playing games like Skyrim when you can crash in like every 5 minutes if not set up properly
There was like
Hundreds, if not thousands, of Windows host process (Rundll32)
Quick Google search said it was Geforce and to just reinstall Geforce Experience and reinstall everything.
Which was like, great, cause I've been meaning to install Nvidia App lol
what in tarnation
ye. fuck nvidia
why the fuck do you still have experience installed
get rid of that garbage
im lazy
I'm not leaving this page amazon let me check out 
Don't buy it 😭 😭 😭
Like even if you have a tonne of money god I want people to not buy the 50-series unless they're already on something old
I'm gonna be buying a 2nd one
im on a rtx 3080, it won't be able to handle 4k at decent framerates
Also it wont get any cheaper lol. this is on the german store. in the netherlands they're selling this shit for 3,5-4k now
Honestly, why not a 4090
And it will definitely get cheaper
2nd hand people sell 4090's for 2300+
https://tweakers.net/pricewatch/1874266/gigabyte-geforce-rtx-4090-gaming-oc-24g.html
Maybe with 200 bucks or so. but not that much man
Gigabyte GeForce RTX 4090 GAMING OC 24G kopen? Vergelijk de shops met de beste prijzen op Tweakers. Wacht je op een prijsdaling? Stel een alert in.
this was the price when the 4090 came out
price didnt really budge
this ain't AMD cards, top shelf nvidia GPUs retain their value rlly well
I was referring to 50-series
what does the 50 series have to do with the 4090 getting cheaper
as I said, they hold their value rlly well
and nvidia knows that
which is why the cut production of it all the way back at the end of November
only thing that'll go down is the rtx 5080
but that's because the webshops are putting those on with scalp pricing
amazon is the one with the most reasonable pricing, since it's from the manafacturer itself. 
They are separate comments
it likely will get cheaper tho lol did you see nvidia stock last week
the more efficient AI models will mean you likely need less computing power and as such there's less of a insane need for loads of high end graphics cards
people will always buy high end graphics cards, for gaming or for workloads, since there is literally no competitor right now in that space, why would retailers lower the prices of the rtx 5090?
Especially in my country it has NEVER been msrp it always had like a 300/400 markup even after prices "stabilized" which pisses me off.
at the least its not gonna go up at much as you'd otherwise expect
true, hopefully there will be stock for a decent price in like 2/3 months but buying is always a headache. 
a


damn one of those dutch marketplaces rejected my report of a seller that the rtx 5090 ti 64GB gddr7x doesn't exist 
id buy a silver wolf card
rime is the first one to fall prey for this, just looking at the silver wolf and not at the card specs
also he's asking 6k for something that doesnt exist
You know what makes this believable?

Hits any edge through the hole by accident. Completely useless design like apple products 
It looks like one of those AI generated models intended to use the least amount of material possible while still preserving function
HAHAHAHAHAHAHAHAHAHAHA
Called it
Hlo everyone
My appstore is set to usa and i am from Asia
Everytime i try to download my resources after downloading the game
It takes so much time
doesn't matter
if your connection is crap they'll be slow to download
or if your phone is underpowered
downloads for me easily can go up to 100mb/s but it never reaches that most of the time becuase of the small downloads
looks like somebody didnt plug in the cable correctly
"third party" cable
oh nice, so another cablemod debacle
or it just actually sends way too much power
doubtful? then i would've expected way more people with those issues already. The cable on the product page looks cheaply made to begin with.
because it doesn't have enough time to ramp up to the full transfer speed
if those are not terminated properly according to the spec then yeah it will advertise that it can pull much more than it's supposed to handle
couple that with poor contact/crimps and you get a melty boi
I'm gonna get a set of custom cablemod cables since I know they do properly terminate theirs
Yeah ik, only if I download the full game which is like what? 20 gigs now?

smth like that
Anybody have extensive knowledge on Windows permissions?
I have a .vhdx virtual drive, but to mount it for access it needs admin credentials every time
Is there any way I can remove this need, just for this specific drive?
how is it opening it? does it autoload the file?
Nah it's just a file you click to mount and open
ok but you click it everytime?
You could just make it automount by running scheduled task under your admin user
Hm, perhaps
keep in mind if that your own user has admin rights. if you run it as another user it might just mount it for that user specifically lol
Okay, dumb question here
- what is the difference between
AdaptiveandNVIDIA driver-controlled
It look like a same thing after I read description 
Nvidia driver controlled is basically the mode it sets that's the best for the GPU in the current situation. But would set it to prefer maximum performance by default if you want to prevent framestutters.
Also uninstall Nvidia app. It's unnecessary bloat

But how else would you check to update the Nvidia drivers though?
you can go on the vidia site to check but let's be honest nobody does that
the nvidia app is as much bloat as amd adrenaline
They're not bloat enough for me to split hairs over, so if I see someone using it I don't bother to mention it
I don remember install this myself
Cave Johnson
just check for updates if you install a new game or have some framerate/ crash issues. for the rest i wouldnt really bother
maybe a dependency that got installed with other software. just check what has the same installdate.
If that's the case I rather keep it so it tells me, "Hey driver update" without having to worry about that though
it's your pc.
ohh deutsch / german player hay
but the option say german stuff
Just reboot?
If that doesn't work try reseating the ram. Maybe one of the sticks died
reboot what
literally being like that each time i plug in the cable to the electrical port
Amber light on dells means a hardware issue, maybe it blinks in a pattern which prob the manual defines what component it causing the issue





