#can i plug diffrent cables to my power station
1 messages · Page 1 of 1 (latest)
Are these the external cables that plug into the wall?
You should use the cable that came in the box with your power supply.
no i mean my hous can handle only 10A almost
the cable is diffrent
to plug
Send a picture please
10a at 240v is 2400w, you are fine
If you zoom you can see more better the pic
Is that the power cable that came with your PSU? Where did you buy it from?
Is your PSU a AX1600i?
Yes
Show the other end of the cable please
Your cable is the wrong one - you need to open a ticket with our support as the one you have is a C16, and there should have been a C19 in the box.
https://help.corsair.com/hc/en-us
I have c19 too
But c19 is to much powerful for my home
It is not good head
It is existe c19 10A 250V ?
Like you can see here i can only go until 10,2
The cable does not decide how much power the PSU pulls - the PSU decides that
The PSU is 1600W
You are fine
And your PC will likely not pull more than 600-1000W
Please use the included cable, or find a C19 to swiss power socket cable. You can also try and open a ticket and see if our support can help you with a cable.
Ah yes i can buy in the store the C19
I would reccomend that. Fastest and easiest and will work with both your PSU, and your house.
But just a quesstion as like it is writen on the cable 16A 250V it will not have problems of the circuit breaker fuses
Ah ok ouf ok
So no, you will not have any problems with circuit breaker fuses
Ah ok thanks so much
You are welcome - Ill mark this question as solved 🙂
I will go in it shop latter to buy a cable C19
Swiss plug wall
Ok in this case i have anought power to make it works
With a AX1600I you should never run out of power 😄 Unless you want to run triple 4090's 🙂