#dhp not getting hot
1 messages · Page 1 of 1 (latest)
What's the wattage?
50w
i plan on upgrading when i have enough money to get a better enclosure so everythings perfect
If the basking spot is around 95 that's fine, 83 is on the lower end of the ambient range but that might be because of the placement of the thermometer up on the glass
I had issues getting to temperature with a 50W DHP, you might want to try an 80W DHP or a halogen
would the 50w be good for like 2-4 months or do i need a quick upgrade?
If your basking spot is hitting 94-96 then you should be ok
okay tysm
The ambient air temps are supposed to be lower than the basking spot, if you can get them to 86 that'd be ideal but it's possible the placement of your ambient thermostat away from the basking spot is just reading a little lower
oh that makes sense so place the probe where the basking probe is to get a better reading?
Okay sorry but what the hell I have a 70w DHP and it can't even reach 90⁰F within 12 hours of it being on basically
You have a second thermometer for the air temperatures you said that's on the glass right, and then the thermostat reading the actual basking spot? I'm thinking that the one on the glass might be a little too far away from the basking spot to measure the ambients properly. If you could place it a little closer it might get a more accurate reading but I'm not sure how your tank is set up.
it was pretty far ill monitor it to see how it goes